Pular para as informações do produto
1 de 1

XAG

XAG P100 OEM U-Type Hook

XAG P100 OEM U-Type Hook

Preço normal $64.99 USD
Preço normal Preço promocional $64.99 USD
Promoção Esgotado
Frete calculado no checkout.

Assistente com atendente ao vivo · Pagamento seguro

Adicione várias peças ou continue comprando
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM U-Type Hook, XAG part number 02-002-09456, is a U-shaped retaining hook used in the application-system mounting of the original XAG P100 agricultural drone. It forms part of the hardware that locates and retains the spray tank or spreading module on the airframe. Operators reach it through searches such as P100 U-type hook, XAG P100 U hook, P100 application system hook, or XAG P100 tank mounting hook.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted in the application-system mounting of the original XAG P100 (2022); not confirmed for the P100 Pro
  • Matched by XAG part number 02-002-09456 and by U profile, opening width and mounting against the hook you removed
  • Genuine XAG OEM retaining hook, brand new

📦 Package Includes

  • 1 × XAG P100 U-type hook, XAG part number 02-002-09456
  • The hook as XAG supplies it under this part number
  • OEM protective packaging

Not included: the application system releasable hook (14-005-00026), the releasable hook bracket (14-005-00022), the releasable hook pin (02-002-09829), the application system mount (02-001-07990), or fasteners.


🔧 Component Overview

A U-shaped hook is one of the simplest retaining shapes there is. Its two legs and curved base capture a bar, pin or rod inside the U, and the width of the opening decides what can pass in and out. When the opening is right, the captured part sits snugly and cannot escape without being lifted clear. When the opening is wider than it should be, the captured part can rattle, shift and, under the right load, slip out.

On the P100, the U-type hook is part of the application-system mounting — the hardware that carries the heaviest single load on the aircraft. That load is not steady. It surges when liquid sloshes in a braking turn, it jolts on every landing, and it pulls hard whenever the aircraft climbs with a full tank. Each of those loads tries to open the U a little.

Most of the time the hook springs back. Overload it, though — a hard landing with a full payload, a module pulled off at an angle, a fall during handling — and the legs can be pushed apart permanently. The hook is then open by a small amount it was never designed to have.

Simple parts like this are easy to overlook in an inspection because there seems to be nothing to check. There is one thing: the shape. A U-type hook carries its whole function in the distance between its legs, and that distance is the one measurement worth making every time the application mounting is apart.

Where it sits. In the application-system mounting arrangement on the P100, alongside the mounts and the releasable hook. Confirm its exact location against the hook you removed.

What it connects to. The mounting hardware and the part it captures, as arranged on your aircraft.

What wears it out. Overload that opens the U. Wear inside the curve where the captured part moves against it. Corrosion from spray chemistry. Impacts during module changes.

What this part is not. It is not the releasable hook (14-005-00026), which is the quick-release latch, and not the hook pin or bracket.


⚙️ Functional Purpose

The U-type hook captures and retains part of the application-system mounting so that the module stays located on the airframe.

A sound U-type hook provides:

  • Secure capture of its mating part inside the U
  • A correct opening width, so the captured part cannot slip out
  • Firm location of the application module relative to the airframe
  • Resistance to surge, landing and climb loads
  • A snug fit that does not rattle in flight

The whole function lives in one dimension: the gap between the legs. Strength matters, but a U that has been opened slightly is a U that captures less, however strong it still is.


🔍 Diagnosis — a U-hook that has opened has already let go once

A U-type hook that has been spread by overload rarely looks broken. It looks like a hook. The difference is in the opening, and it can be small. But a spread opening is evidence that the hook was loaded beyond what it was built for, and it now captures its mating part with less margin than before.

That makes the diagnosis a comparison of shape.

  • Compare the opening. Hold the hook against a new one or, if fitted in pairs, against its partner. Legs that are no longer parallel, or an opening that is visibly wider, mean the hook has been spread.
  • Check the fit of the captured part. With the module fitted, feel for rattle or movement at the hook. A snug fit means the opening is right. Play means it is not.
  • Look inside the curve. A polished groove or worn notch where the captured part sits shows wear that reduces fit and weakens the hook.
  • Look for cracks. Inspect the base of the U, where bending stress is greatest, for cracks or stress whitening.
  • Do not bend it back. A U that has been spread and then squeezed closed has been bent twice and is weaker than before. Replace it instead.
  • Remember the event. If the aircraft had a hard landing with payload or the module was pulled off at an angle, check this hook even if nothing else looks wrong.
  • Photograph the hook in place. Send us the photograph if you want the match confirmed.

A spread, cracked or deeply worn U-type hook should be replaced. A sound one with a snug fit can stay.


⚠️ Common Replacement Indicators

U-type hook replacement is the likely answer when an operator or technician observes:

  • An opening that is wider than a new hook or than its partner
  • Legs that are no longer parallel
  • Rattle or play at the hook with the module fitted
  • A worn groove inside the curve
  • Cracks or stress whitening at the base of the U
  • A hook that has been bent back after being spread
  • Corrosion on the hook
  • A hard landing with payload or a module pulled off at an angle

These come from the loads the application mounting carries and the handling it sees during module changes.

These are not U-type hook symptoms, and this part will not fix them. A worn quick-release latch is the releasable hook. A hook that engages off-line on a bent mount is the hook bracket. A cracked module mount is the application system mount. None of those is this U-type hook.


📐 Specifications

Product name: XAG P100 OEM U-Type Hook

XAG part number: 02-002-09456

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Application system mounting

Component type: U-shaped retaining hook

Installed position: Application-system mounting arrangement

Function: Captures and retains part of the application-system mounting

Quantity: 1 × hook

Material, opening width and dimensions: Not published for this part; compare against the hook you removed

Installation method: Direct replacement at the existing position

Service adjustability: None — a spread hook should not be bent back

Classification: Genuine XAG OEM retaining hook

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove and rinse the application module and remove the flight battery
  • Confirm the old hook carries XAG part number 02-002-09456
  • Photograph the hook in place, including what it captures and how it is fastened
  • Compare the old hook's opening with the new one

During installation

  • Remove the old hook and clean the mounting area
  • Fit the new hook in the same orientation as the original
  • Tighten any fasteners evenly and firmly
  • Inspect the captured part for wear while it is accessible

After installation

  • Fit the module and confirm the captured part sits snugly in the U
  • Push and pull the module by hand and confirm there is no rattle
  • Inspect the hook after any hard landing with payload
  • Remove modules straight, without levering against the mounting hardware

🚜 Necessary For

The U-type hook is a small but load-bearing spare for operations that carry heavy payloads and change modules often.

  • XAG P100 operators flying full spray or spread payloads
  • Aerial applicators working rough ground with frequent hard landings
  • Custom application contractors changing modules between jobs
  • Crews repairing the application mounting after an incident
  • Agricultural drone service centres supporting XAG aircraft
  • Growers maintaining their own P100

This is not the part you need if the problem is the quick-release latch, the hook bracket, or the module mount itself. Check which part is actually moving first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your hook; this one is identified for the original P100.


💡 Why This Part Matters

The case for this part is about margin. A U-type hook in the application mounting is designed to capture its mating part with a certain amount of reserve. Each time it is overloaded and spreads, some of that reserve is spent. The hook still holds on an ordinary day. On the day of the next hard landing or the next surge, it has less in hand.

That is why a spread hook is worth replacing even though it still appears to work. It has already shown it can be opened by the loads it sees, and it has less opening left to give.

It also protects its neighbours. A captured part that rattles in a spread U hammers against the hook and against the mount around it on every landing. Over a season that turns one loose fit into worn pins, elongated holes and a mount that no longer holds the module square. Replacing the hook early stops that spread of wear.

A new U-type hook restores:

  • Full capture margin in the application mounting
  • A snug, rattle-free module
  • Correct location of the module relative to the airframe
  • Confidence after a hard landing
  • Less wear on the captured part and neighbouring mounts

The honest point: bending a spread hook back closed makes it look right and leaves it weaker. Replace it.


🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM U-Type Hook

XAG part number: 02-002-09456

Brand: XAG

Component: U-shaped retaining hook

Category: Spray system parts

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: Application-system mounting arrangement

Primary function: Capturing and retaining part of the application-system mounting

Characteristic failure mode: Overload that spreads the U and reduces capture margin

Distinguishing diagnostic rule: Compare the opening with a new hook or its partner; rattle at the hook with the module fitted means the opening is too wide

Repair rule: Do not bend a spread hook back; replace it

Common causes: Hard landings with payload, modules removed at an angle, wear inside the curve, corrosion

Quantity supplied: 1 × hook

Not included: Releasable hook 14-005-00026, hook bracket 14-005-00022, hook pin 02-002-09829, application system mount 02-001-07990

Fitment method: XAG part number 02-002-09456 plus U profile, opening width and mounting against the removed hook

Service adjustability: None

Verification after fitting: Snug capture, no rattle with module fitted

Condition: Brand new

Part classification: Genuine XAG OEM retaining hook

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 U-type hook

XAG 02-002-09456

02-002-09456 U-type hook

XAG P100 OEM U-type hook

P100 U hook replacement

XAG P100 U hook

XAG P100 application system hook

XAG P100 tank mounting hook

P100 spray tank rattle

XAG P100 module retaining hook

XAG P100 application system parts

XAG P100 mounting hardware

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 U-type hook Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 U-type hook? It is a U-shaped retaining hook, XAG part number 02-002-09456, used in the application-system mounting of the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Is it the same as the releasable hook? No. The releasable hook, XAG part number 14-005-00026, is the quick-release latch. The U-type hook is a separate retaining part.

How do I know if my U-type hook is damaged? Compare its opening with a new hook or its partner. A wider opening, legs no longer parallel, or rattle with the module fitted mean it has been spread.

Can I bend a spread hook back? No. Bending it back makes it look right but leaves it weaker. Replace it.

What spreads a U-type hook? Overload: hard landings with a full payload, modules pulled off at an angle, or drops during handling.

The module rattles. Could this hook be the cause? It could, if the U has opened. Also check the releasable hook, its pin and bracket, and the module mount.

Why replace a hook that still holds? Because a spread hook has already lost some of its capture margin and has less in reserve for the next heavy load.

Does it come with fasteners? No. Reuse sound original fasteners.

Can I fit it myself? Yes. Remove and rinse the module, photograph the hook in place, and fit the new one in the same orientation.

How do I check the repair? Fit the module and confirm the captured part sits snugly with no rattle when the module is pushed and pulled.

Should I inspect it after a hard landing? Yes. Check the opening and look for cracks at the base of the U.

How do I avoid damaging it? Remove modules straight rather than levering them, and avoid hard landings with a full payload where possible.

What should I check alongside it? The part it captures, the releasable hook and the application system mount, which share the same loads.

Can a rattling hook damage other parts? Yes. A loose captured part hammers against the hook and its mount on every landing, wearing pins and elongating holes. Fix the fit early.

Will a P100 Pro hook fit? Do not assume so. Match the XAG part number on the hook you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-002-09456, or send us a photograph of the hook in place and we will confirm the match.

Ver informações completas

Formulário de contato