Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P150 OEM Application System Tube Connector Component, XAG part number 14-007-00116, is a tube connector component in the application system of the XAG P150 (2024) agricultural drone. It joins tubes in the liquid path so that product flows from tank to nozzles without leaking. Leaks at joints are usually obvious: drips and wet residue. But a joint on the suction side of a pump can fail in a less obvious way, drawing air in instead of letting liquid out, which shows up as poor priming, surging flow or uneven spraying with no drip to be seen. Operators reach it through searches such as P150 tube connector, XAG P150 spray tube fitting, P150 application system leak, or XAG P150 pump not priming.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the application system tubes, including the long tube (02-002-14300) and short tube (02-002-14301); the pump; the water pipe adapter (14-007-00019); or tools.
The liquid path of the P150's application system runs from the tank, through the pump, through tubes and connectors, to the nozzles. Every joint along that path is a place where liquid could escape or air could enter. Tube connector components make those joints, joining tubes securely and sealing them so that the system holds pressure and delivers exactly what the operator has set.
On the pressure side of the pump, the side that pushes liquid toward the nozzles, a failing joint leaks outward. Drips, wet residue and stains around the joint make it easy to find. Those leaks waste product, contaminate the airframe and can reach electronics.
On the suction side of the pump, the side that draws liquid from the tank, a failing joint behaves differently. The pump is pulling, so a poor seal draws air in rather than letting liquid out. There may be no drip at all. Instead, the pump struggles to prime, the flow surges or pulses, bubbles appear in clear sections of tube, and spraying becomes uneven. It is easy to blame the pump or the nozzles for symptoms that actually come from an air leak at a connector.
The specific position of this connector in the P150 liquid path is not published for this part. Wherever it sits, the same principles apply: a joint must be fully seated, square and sealed, and the connector must be undamaged.
Connectors fail from cracks caused by impacts and over-tightening, from chemical attack on the connector or its seals, from repeated disconnection during cleaning and changeover, and from tubes pulled at an angle that stress the joint. Dried residue can also stop a connector seating fully.
A simple test finds most problems. Run the system with clean water and watch every joint for drips. Then watch the flow: steady flow and a quick prime suggest a sound suction side; surging, slow priming and bubbles suggest air is getting in somewhere.
When a connector is replaced, the tube ends it joins should be inspected too. A split or hardened tube end will not seal even in a new connector.
Where it sits. In the application system liquid path; specific position not published for this part.
What it connects to. The application system tubes it joins.
What wears it out. Chemical attack. Repeated disconnection. Over-tightening. Impacts. Tubes pulled at an angle. Dried residue.
What this part is not. It is not a tube, the pump or the water pipe adapter.
The application system tube connector component joins tubes in the liquid path and seals the joint.
A sound tube connector provides:
Its value is in keeping product in the system and air out of it.
Not every leak drips. On the suction side, a failing joint draws air in. Check connectors when flow is uneven, even if everything looks dry.
If the connector is cracked, will not seat fully, or leaks liquid or air after reseating, this connector is the part.
Tube connector replacement is the likely answer when an operator or technician observes:
These come from chemicals, repeated disconnection, over-tightening, impacts and residue.
These are not tube connector symptoms, and this part will not fix them. A split tube needs the tube. A blocked filter or nozzle needs cleaning. A worn pump needs the pump. Wrong flow settings need configuration. A new connector seals the joint; it does not repair other parts of the liquid path.
Product name: XAG P150 OEM Application System Tube Connector Component
XAG part number: 14-007-00116
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Application system, liquid path
Component type: Tube connector
Installed position: In the liquid path; not published for this part
Function: Joins and seals application system tubes
Works with: Long application system tube 02-002-14300, short application system tube 02-002-14301 (sold separately)
Quantity: 1 × component
Size and connection type: Not published for this part
Installation method: Direct replacement in the liquid path
Classification: Genuine XAG OEM application system part
Condition: Brand new
Before installation
During installation
After installation
The tube connector keeps the liquid path sealed.
Service centres check suction-side joints early when priming is poor, because an air leak there is easy to miss and often mistaken for a pump fault.
This is not the part you need if the connector is sound and the fault is a split tube, a blocked filter or nozzle, or a worn pump. Run a water test and inspect each joint first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your connector; this one is identified for the P150.
The application rate the operator sets is only delivered if the liquid path is sealed. Every joint has to hold product in and keep air out.
Outward leaks are easy to spot. Air leaks on the suction side are not, and they cause some of the most confusing application problems: poor priming, surging flow and uneven spraying with nothing visibly wrong.
Checking connectors when flow is uneven, even when everything looks dry, often finds the cause quickly and avoids replacing a pump that was never faulty.
Replacing a cracked or worn connector restores a sealed joint, accurate delivery and a clean airframe.
Rinsing the system after every job, and avoiding over-tightening, protects connectors from chemical attack and cracking.
For crews applying corrosive products, inspecting connectors more often catches chemical damage before it causes a leak in the field.
A sound application system tube connector restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Application System Tube Connector Component
XAG part number: 14-007-00116
Brand: XAG
Component: Application system tube connector
Category: Application system liquid path
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: In the application system liquid path
Primary function: Joining and sealing application system tubes
Characteristic failure modes: Cracks, incomplete seating, chemical attack, worn seals
Distinguishing diagnostic rule: Poor priming or surging flow with no drip points at an air leak at a joint
Common causes: Chemicals, repeated disconnection, over-tightening, impacts, residue
Wear driver: Chemical exposure and frequency of disconnection
Related parts: Long application system tube 02-002-14300, short application system tube 02-002-14301, water pipe adapter 14-007-00019
Not included: Tubes, pump, water pipe adapter, tools
Fitment method: XAG part number 14-007-00116 plus size and form against the removed connector
Verification after fitting: No drips; quick priming; steady flow; no bubbles
Service habit: Rinse the system with clean water after every job
Condition: Brand new
Part classification: Genuine XAG OEM application system part
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 application system tube connector component
XAG 14-007-00116
14-007-00116 tube connector
XAG P150 OEM tube connector
P150 tube connector replacement
XAG P150 spray tube fitting
XAG P150 application system leak
XAG P150 pump not priming
P150 surging spray flow
XAG P150 uneven spraying
XAG P150 application system parts
XAG P150 spray system parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 tube connector Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 application system tube connector component? It is a tube connector, XAG part number 14-007-00116, that joins and seals tubes in the XAG P150 application system.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
My pump is slow to prime but nothing is dripping. Could it be a connector? Yes. On the suction side, a failing joint draws air in instead of dripping.
What signs point to an air leak? Slow priming, surging or pulsing flow, bubbles in clear tubes, and uneven spraying.
Where exactly is it fitted? The specific position is not published for this part. Match it against the connector you removed.
Does it include the tubes? No. The long tube is 02-002-14300 and the short tube is 02-002-14301, sold separately.
How do I test for leaks? Run the system with clean water and watch every joint for drips and the flow for surging and bubbles.
Should I replace the tube ends too? If they are split or hardened, yes. They will not seal in a new connector.
Can I fit it myself? Yes. Drain and rinse, photograph the joint, fit the connector and seat each tube fully and squarely.
How do I check the repair? No drips, quick priming, steady flow and no bubbles in a water test.
Can I seal a cracked connector with tape? No. Replace it. Tape will not hold pressure or resist chemicals.
What damages connectors? Chemical attack, repeated disconnection, over-tightening, impacts and dried residue.
Will a P150 Max connector fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
The nozzles are clean but spraying is uneven. Why? An air leak at a suction-side joint can cause it. Check connectors.
Should I wear protection? Yes. Gloves and eye protection, as residue may remain in the system.
How can I make connectors last? Rinse the system after every job and avoid over-tightening.
Is it the same as the water pipe adapter? No. The water pipe adapter is 14-007-00019, a separate part.
How do I confirm the part number? Look for XAG part number 14-007-00116, or send us a photograph of the joint and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega