Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P150 OEM Arm Clamp Clip Kit, XAG part number 14-006-00049, is the clip kit for the arm clamp that locks a folding arm in flight position on the XAG P150 (2024) agricultural drone. Every arm on the P150 folds for transport and must be locked rigidly straight before flight. The clamp and its clips are what do that locking. A clip that has worn or cracked can leave an arm that looks locked but is not held as firmly as it should be. Operators reach it through searches such as P150 arm clamp clip, XAG P150 arm lock, P150 arm not locking, or XAG P150 folding arm clip.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
The exact contents and piece count of the kit are not published for this part. Compare it with the clips on your arm clamp, or send us a photograph and we will confirm.
Not included: the arm clamp body, the arm folding buckle seat (02-001-10796), the arm (14-007-00034), or tools.
Folding arms are what make a large agricultural drone transportable. The P150's arms swing in for the vehicle and out for flight. But a folded joint is a weak point by nature, and in flight the arms carry the full thrust of the motors and propellers. Before the aircraft takes off, each arm has to be locked so that its joint behaves as if it were one solid piece.
That locking is done by the arm clamp, and the clip kit is the part of the clamp that engages and holds it. When the operator closes the clamp, the clips catch and hold it closed under tension, pulling the joint tight. When the operator opens it for folding, the clips release.
Clips are small, but they are among the most-used and most-loaded parts on the aircraft. Every arm is unfolded and locked at the start of work and unlocked and folded at the end, plus every time the aircraft is moved between fields. Each cycle flexes the clips. In flight they hold against the bending and twisting forces the arm transmits. Over time they wear at the catching surfaces, lose tension or crack.
A worn clip produces a dangerous kind of fault: an arm that appears locked but is not held as firmly as designed. The clamp may close with less resistance than usual, close without a positive feel, or spring partly open under a firm push. In flight, a joint that is not fully locked can flex, and in the worst case it can let the arm move under load.
That is why arm locks deserve a deliberate check before every flight, and why clips that show any sign of wear should be replaced rather than tolerated. They are inexpensive, and they hold up a large part of the aircraft.
The clip kit is distinct from the folding buckle seat, the part the clamp locks against. A lock that will not engage can be the clips, the buckle seat or the clamp body, and each is a separate repair.
Comparing all arms is the simplest way to spot a worn clip. Every clamp on the aircraft should close with the same firm, positive feel, and one that feels different deserves a close look.
Where it sits. In the arm clamp at each folding arm joint.
What it connects to. The arm clamp body, and through it the folding buckle seat and arm sections.
What wears it out. Daily locking and unlocking cycles. Flight loads. Forcing the clamp. Dirt and residue in the mechanism. Knocks to folded arms.
What this part is not. It is not the clamp body, the folding buckle seat or the arm.
The arm clamp clip kit engages and holds the arm clamp closed, locking a folding arm rigidly in flight position.
A sound clip kit provides:
Its value is in certainty. A locked arm must be truly locked.
Clip wear shows up first in how the clamp feels when it closes. Check every arm before every flight, and compare them.
If a clean clamp closes without positive engagement, the arm moves at the joint, or the clips are worn or cracked, this clip kit is the part.
Arm clamp clip kit replacement is the likely answer when an operator or technician observes:
These come from locking cycles, flight loads, forcing, dirt and knocks.
These are not clip kit symptoms, and this part will not fix them. A worn or cracked buckle seat needs the buckle seat. A bent arm needs the arm. A cracked clamp body needs the clamp. Dirt in the mechanism needs cleaning. A new clip kit restores the lock; it does not straighten arms or repair the seat.
Product name: XAG P150 OEM Arm Clamp Clip Kit
XAG part number: 14-006-00049
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Airframe, arm folding and locking
Component type: Arm clamp clip kit
Installed position: In the arm clamp at a folding arm joint
Function: Engages and holds the arm clamp closed in flight position
Works with: Arm folding buckle seat 02-001-10796 (sold separately)
Kit contents: Not published for this part
Material and dimensions: Not published for this part
Quantity: 1 × kit
Installation method: Direct replacement in the arm clamp
Classification: Genuine XAG OEM arm clamp clip kit
Condition: Brand new
Before installation
During installation
After installation
The arm clamp clip kit is a safety-relevant wear part for aircraft folded every day.
This is not the part you need if cleaning restores a positive lock, the buckle seat is worn or cracked, or the arm is bent. Clean the mechanism and inspect the buckle seat first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your kit; this one is identified for the P150.
Each arm carries a motor and propeller producing a large share of the aircraft's lift. The folding joint has to transmit all of that load as if the arm were solid, and the clamp and its clips are what make it so.
A worn clip does not usually fail suddenly. It loses a little grip, the clamp feels a little softer, and the joint is held a little less firmly. Because the change is gradual, it is easy to get used to. A deliberate check of every arm lock before flight, comparing the feel between arms, is what catches it.
Replacing a worn clip kit is a small, quick job. The alternative — an arm joint that flexes or moves under flight load — is not a risk worth taking for a part this inexpensive.
Keeping the clamp mechanism clean and never forcing a clamp that resists also helps the new clips last.
For fleets, tracking which arms have had clips replaced, and when, helps predict when the others will need the same attention.
A sound arm clamp clip kit restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Arm Clamp Clip Kit
XAG part number: 14-006-00049
Brand: XAG
Component: Arm clamp clip kit
Category: Arm folding and locking
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: In the arm clamp at a folding arm joint
Primary function: Engaging and holding the arm clamp closed in flight position
Works with: Arm folding buckle seat 02-001-10796
Characteristic failure modes: Worn catching surfaces, loss of tension, cracks, deformation
Distinguishing diagnostic rule: A clamp that closes without positive engagement, or an arm that moves at the joint, points at the clips
Common causes: Locking cycles, flight loads, forcing, dirt, knocks to folded arms
Wear driver: Number of fold and lock cycles
Kit contents: Not published for this part
Not included: Clamp body, buckle seat 02-001-10796, arm 14-007-00034, tools
Fitment method: XAG part number 14-006-00049 plus shape and fit against the removed clips
Service adjustability: None
Verification after fitting: Positive engagement; no movement at the joint; matches other arms
Pre-flight check: Confirm every arm lock by feel and by pushing at the joint
Condition: Brand new
Part classification: Genuine XAG OEM arm clamp clip kit
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 arm clamp clip kit
XAG 14-006-00049
14-006-00049 clip kit
XAG P150 OEM arm clamp clip
P150 arm clamp clip replacement
XAG P150 arm lock
XAG P150 folding arm clip
XAG P150 arm not locking
P150 arm clamp loose
XAG P150 arm clamp
XAG P150 arm folding parts
XAG P150 airframe parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 arm clamp clip Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 arm clamp clip kit? It is the clip kit, XAG part number 14-006-00049, for the arm clamp that locks a folding arm in flight position on the XAG P150.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
My arm clamp closes too easily. Is it the clips? Likely. A clamp that closes without a firm, positive engagement usually has worn clips. Clean the mechanism and re-test first.
How do I check an arm lock? Close the clamp, feel for a positive engagement, then push gently near the joint. A locked arm should not move.
Why does a worn clip matter? A joint that is not fully locked can flex under flight loads, and in the worst case the arm can move.
Does it include the clamp body or buckle seat? No. The buckle seat is XAG part number 02-001-10796, sold separately.
My clamp will not lock even with new clips. Why? Check the folding buckle seat for wear or cracks, and the clamp body.
What wears the clips out? Daily locking and unlocking, flight loads, forcing the clamp, dirt in the mechanism and knocks to folded arms.
Can I fit it myself? Yes. Remove the battery, fold and support the arm, photograph the clips, clean the mechanism and fit the new clips in their original positions.
How do I check the repair? Close the clamp for a positive engagement, push to confirm no joint movement, and compare with the other arms.
What is in the kit? Contents are not published for this part. Compare with your clamp or send us a photograph and we will confirm.
Should I replace clips on all arms at once? If they have seen the same use and show similar wear, replacing them together keeps locking consistent.
Can dirt stop the clamp locking? Yes. Clean and re-test before replacing parts.
How often should I check arm locks? Before every flight.
Will a P150 Max kit fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Is it the same as the P100 arm clamp? No. This kit is identified for the P150. Match the part number for your aircraft.
Can I force a stiff clamp closed? No. Forcing damages clips and the buckle seat. Clean and inspect instead.
How do I confirm the part number? Look for XAG part number 14-006-00049, or send us a photograph of the arm clamp and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega