Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P150 OEM Fixed Inserts for Motor Base, XAG part number 02-001-11502, are the fixed inserts that sit in the motor base of the XAG P150 (2024) agricultural drone and give the motor's fasteners something solid to bite into. A motor is only as secure as the threads holding it down. When a motor screw spins without tightening, the screw is rarely the problem: the insert it threads into has stripped or pulled loose, and fitting a new screw into the same insert will not hold the motor. Operators reach them through searches such as P150 motor base insert, XAG P150 motor mount insert, P150 threaded insert, or XAG P150 motor screw won't tighten.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
The quantity per pack is not published for this part. Check the listing quantity, or ask us and we will confirm before dispatch.
Not included: the motor, the motor base itself, motor screws, the propeller post (02-002-12169), the motor heat dissipation cover (02-001-09662), or tools.
Each P150 motor is fastened down to a motor base at the end of its arm. The fasteners that hold it do not thread directly into the base material. They thread into fixed inserts set into the base, which provide durable threads that can take the clamping load and survive the motor being removed and refitted during service.
That arrangement is common wherever a strong thread is needed in a material that could not hold one on its own. The insert carries the thread; the base holds the insert. As long as both are sound, the motor screws tighten fully and hold the motor rigidly against the thrust, torque and vibration it produces in flight.
Inserts fail in two main ways. The thread inside them can strip, usually from over-tightening, from a screw started at an angle, or from repeated removal and refitting. Or the insert itself can work loose in the base, so that it turns with the screw instead of holding still. Either way, the screw spins without tightening, or tightens and then gradually loses its grip as the motor vibrates.
The natural reaction is to blame the screw and fit a new one. That rarely works, because the fault is in the insert. A new screw in a stripped or spinning insert has nothing to bite on. Recognising that early saves time and prevents a motor from being flown on fasteners that only look tight.
A motor that is not held rigidly is a serious problem. It vibrates more, which loads the arm, the bearings and the electronics. It can shift under thrust, changing its alignment. And in the worst case, fasteners that are not properly held can back out completely.
Signs of a loose motor include extra vibration on one arm, fretting marks around the motor base, a motor that can be rocked by hand, and fasteners that never stay at their set torque. Any of these is a reason to check the inserts on that motor.
Good practice prevents most insert failures: start every screw by hand so it cannot cross-thread, tighten evenly in a cross pattern, and never force a screw that resists.
When a motor is removed, it is worth turning each screw into its insert by hand first. A thread that feels rough, loose or gritty is worth inspecting before the motor goes back on.
Where they sit. In the motor base at the end of each arm, under the motor.
What they connect to. The motor base that holds them and the motor screws that thread into them.
What wears them out. Over-tightening. Cross-threading. Repeated motor removal. Vibration from a loose motor. Corrosion from residue.
What this part is not. It is not the motor, the motor screws or the motor base itself.
The fixed inserts for motor base provide durable threads for the screws that hold the motor down.
Sound inserts provide:
Their value is in giving the motor screws something to hold.
When a motor screw spins or will not stay tight, check the insert it threads into before replacing the screw.
If an insert is stripped, loose or damaged, this insert is the part. Replace any screw with damaged threads at the same time.
Insert replacement is the likely answer when an operator or technician observes:
These come from over-tightening, cross-threading, repeated removal and vibration.
These are not insert symptoms, and this part will not fix them. A screw with damaged threads in a sound insert needs a new screw. A cracked motor base needs the base. Worn motor bearings need bearings. An unbalanced propeller needs the propeller. New inserts restore the threads; they do not repair a damaged motor or base.
Product name: XAG P150 OEM Fixed Inserts for Motor Base
XAG part number: 02-001-11502
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Propulsion, motor mounting
Component type: Fixed threaded inserts
Installed position: In the motor base, under the motor
Function: Provide threads for the motor fasteners
Thread size and dimensions: Not published for this part
Material: Not published for this part
Quantity per pack: Not published for this part
Installation method: Fitted into the motor base
Classification: Genuine XAG OEM inserts
Condition: Brand new
Before installation
During installation
After installation
Motor base inserts hold the motor to the aircraft.
Service centres often keep spare inserts on hand, since a stripped insert discovered during a motor swap would otherwise hold the aircraft on the bench.
This is not the part you need if the insert is sound and only the screw is damaged, or if the motor base itself is cracked. Test with a known-good screw and inspect the base first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your inserts; these are identified for the P150.
The motor is the part of the aircraft that does the most work, and the inserts are what hold it in place. A motor that is not held rigidly vibrates, shifts and loads everything around it.
The fault is easy to misread. A screw that will not tighten looks like a screw problem, and a new screw is the obvious fix. When the insert is the cause, that fix does not hold, and the motor is flown on fasteners that only look secure.
Replacing a stripped or loose insert is a small repair that restores a fully secure motor mount. It protects the bearings, the arm and the electronics from the extra vibration a loose motor creates.
Careful habits prevent most insert damage: starting screws by hand, tightening evenly and never forcing a screw that resists.
Checking motor mounts by hand during routine inspection, by rocking each motor gently, catches looseness before it becomes vibration or a lost fastener.
Sound motor base inserts restore:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Fixed Inserts for Motor Base
XAG part number: 02-001-11502
Brand: XAG
Component: Motor base fixed inserts
Category: Motor mounting
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: In the motor base, under the motor
Primary function: Providing threads for the motor fasteners
Characteristic failure modes: Stripped threads, insert turning or pulling loose
Distinguishing diagnostic rule: If a known-good screw will not tighten, the insert is the cause
Common causes: Over-tightening, cross-threading, repeated motor removal, vibration
Wear driver: Number of motor removals and how screws are tightened
Related parts: Propeller post 02-002-12169, motor heat dissipation cover 02-001-09662
Quantity per pack: Not published for this part
Not included: Motor, motor base, motor screws, tools
Fitment method: XAG part number 02-001-11502 plus size and shape against the removed inserts
Verification after fitting: Screws tighten fully; motor rigid by hand; normal vibration in hover
Inspection habit: Rock each motor by hand during routine inspection
Condition: Brand new
Part classification: Genuine XAG OEM inserts
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 fixed inserts for motor base
XAG 02-001-11502
02-001-11502 motor base insert
XAG P150 OEM motor base insert
P150 motor base insert replacement
XAG P150 motor mount insert
XAG P150 threaded insert
P150 motor screw won't tighten
XAG P150 loose motor
XAG P150 motor vibration
XAG P150 motor parts
XAG P150 propulsion parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 motor base insert Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What are the XAG P150 fixed inserts for motor base? They are the inserts, XAG part number 02-001-11502, set into the motor base that the motor screws thread into.
Which aircraft do they fit? The XAG P150 (2024). They are not confirmed for the P150 Max.
My motor screw spins and will not tighten. Do I need a new screw? Probably not. Test with a known-good screw. If that also fails, the insert has stripped or come loose.
How many inserts come in a pack? The quantity is not published for this part. Check the listing quantity or ask us to confirm.
Do they include screws? No. Replace any screw with damaged threads separately.
What strips inserts? Over-tightening, cross-threading and repeated motor removal.
How do I know the motor is loose? It rocks by hand, the arm vibrates more, or there are fretting marks around the base.
Is a loose motor dangerous? It increases vibration and loads the arm, bearings and electronics. Do not fly with a motor that is not held rigidly.
Can I fit them myself? Yes, with care. Remove the motor, fit the insert squarely and fully home, and confirm it does not turn.
How do I check the repair? Screws tighten fully, the motor is rigid by hand and vibration is normal in a hover test.
Can I use thread-locker to hold a stripped screw? No. It does not restore a stripped thread. Replace the insert.
What are the thread size and dimensions? They are not published for this part. Match against the inserts you removed.
Do they include the motor base? No. A cracked base needs its own repair.
Will P150 Max inserts fit? Do not assume so. Match the XAG part number; these are identified for the P150.
How can I avoid stripping them? Start screws by hand, tighten evenly in a cross pattern and never force a screw.
Should I check other motors? Yes. Rock each motor by hand during routine inspection.
Do they affect motor alignment? Yes. A loose motor can shift under thrust. Sound inserts hold it in place.
How do I confirm the part number? Look for XAG part number 02-001-11502, or send us a photograph of the motor base and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega