Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P150 OEM Nozzle ESC Board, XAG part number 14-007-00098, is the ESC board that drives the nozzle motor on the XAG P150 (2024) agricultural drone. ESC stands for electronic speed controller: this board takes power and commands from the aircraft and turns them into the precisely controlled drive the nozzle motor needs. When it fails, a perfectly good nozzle sits still. Operators reach it through searches such as P150 nozzle ESC, XAG P150 nozzle driver board, P150 nozzle not spinning, or XAG P150 nozzle controller.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the nozzle (05-002-02065), the board's housing or cover, cables, the propulsion motor ESC parts, or fasteners.
The P150's nozzles are motor-driven. A small motor in each nozzle assembly spins the parts that shape the liquid into spray, and the speed of that motor matters: it is part of how the system controls the spray it produces. A motor like that cannot simply be connected to the battery. It needs a controller that switches power to it in the right sequence and at the right rate, responding to commands from the aircraft. That controller is the nozzle ESC board.
An ESC board is a power electronics assembly. It handles current, switches it rapidly, and generates heat while doing so. It also communicates with the rest of the aircraft so that it knows when, and how fast, to drive the nozzle. On an agricultural drone it does all of that in a hostile place: close to the spray, exposed to vibration, and subject to temperature swings and wash-down.
ESC boards fail in a few characteristic ways. Moisture or chemical residue that reaches the board through a damaged cover can corrode components and connectors. Heat from long, hard working days stresses components over time. A short or fault in the nozzle motor or its wiring can damage the board's output stage. And impacts to the area can crack the board or its solder joints.
The symptom of a failed nozzle ESC is a nozzle that will not run, runs erratically or reports a fault, while the nozzle itself turns freely and smoothly by hand. That last check is the key one. A nozzle that is rough or seized by hand is a nozzle problem, and fitting a new ESC board to it will not help; worse, a seized motor can damage a new board.
Equally, cables and connectors between the board and the nozzle cause many of the same symptoms. A corroded connector or a broken wire looks exactly like a dead board from the ground. Checking them first is quick and avoids replacing electronics unnecessarily.
The diagnostic sequence is therefore: confirm the nozzle turns freely, check the cable and connectors, look for visible damage or moisture on the board, and only then replace the board.
When a new board is fitted, protecting it is part of the repair. A cracked cover or missing seal that let moisture reach the old board will do the same to the new one, so the enclosure deserves as much attention as the electronics.
Where it sits. On the P150 application system, connected to its nozzle motor.
What it connects to. The nozzle motor on one side and the aircraft's power and command wiring on the other.
What wears it out. Moisture and residue through damaged covers. Heat. Faults in the nozzle motor or wiring. Impacts. Vibration.
What this part is not. It is not the nozzle, the propulsion motor ESCs, the cables or the cover.
The nozzle ESC board drives the P150 nozzle motor under command from the aircraft.
A sound nozzle ESC board provides:
Its value is in control. A healthy nozzle only runs as well as the board driving it.
Separate the nozzle, its wiring and its board before replacing anything.
If the nozzle turns freely, the wiring is sound and the board is damaged, corroded or the drive still fails, this board is the part.
Nozzle ESC board replacement is the likely answer when an operator or technician observes:
These come from moisture, heat, motor and wiring faults, impacts and vibration.
These are not ESC board symptoms, and this part will not fix them. A nozzle that is rough or seized by hand is the nozzle. A broken cable or corroded connector is the wiring. A cracked cover needs the cover. A propulsion motor fault involves the propulsion ESCs, not this board. A new board restores nozzle drive; it does not repair the nozzle or wiring.
Product name: XAG P150 OEM Nozzle ESC Board
XAG part number: 14-007-00098
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Application system, nozzle drive
Component type: Electronic speed controller board
Drives: Nozzle 05-002-02065 motor (sold separately)
Installed position: On the application system, connected to the nozzle motor
Current rating and firmware: Not published for this part
Connectors: Not published for this part; match against the board you removed
Quantity: 1 × board
Installation method: Direct replacement
Classification: Genuine XAG OEM ESC board
Condition: Brand new
Before installation
During installation
After installation
The nozzle ESC board is the electronic repair for a nozzle that will not run.
This is not the part you need if the nozzle is rough or seized, or the fault is in the cable or connector. Turn the nozzle by hand and check the wiring first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your board; this one is identified for the P150.
On the P150, a nozzle is only as good as the board that drives it. A failed board leaves a spray position idle, and an idle position leaves a stripe of the field without its share of product.
Getting the diagnosis right matters in both directions. Replacing the nozzle when the board has failed leaves the fault in place. Replacing the board when the nozzle is seized can damage the new board as soon as it tries to drive the stuck motor. Turning the nozzle by hand and checking the wiring first sends the repair to the right part.
Protecting the board's enclosure is what makes the repair last. Most board failures start with moisture or residue getting in, and a sealed, intact cover keeps them out.
When several nozzle boards fail over a season, the pattern is worth looking at. Repeated failures at the same position, or after wash-downs, usually point at an enclosure, a seal or a cleaning habit rather than at the boards themselves.
A sound nozzle ESC board restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Nozzle ESC Board
XAG part number: 14-007-00098
Brand: XAG
Component: Nozzle electronic speed controller board
Category: Application system electronics
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: On the application system, connected to the nozzle motor
Primary function: Driving the P150 nozzle motor
Drives: Nozzle 05-002-02065
Characteristic failure modes: Moisture corrosion, heat damage, output stage failure, impact cracks
Distinguishing diagnostic rule: A nozzle that turns freely by hand but will not run, with sound wiring, points at the board
Common causes: Moisture through damaged covers, heat, seized nozzle motors, impacts, vibration
Not included: Nozzle 05-002-02065, enclosure or cover, cables, propulsion ESC parts, fasteners
Fitment method: XAG part number 14-007-00098 plus board outline and connectors against the removed board
Verification after fitting: No nozzle faults; nozzle runs smoothly in a water test
Condition: Brand new
Part classification: Genuine XAG OEM ESC board
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 nozzle ESC board
XAG 14-007-00098
14-007-00098 nozzle ESC
XAG P150 OEM nozzle ESC
P150 nozzle ESC replacement
XAG P150 nozzle driver board
XAG P150 nozzle controller
XAG P150 nozzle not spinning
P150 nozzle fault
XAG P150 application system electronics
XAG P150 spraying system parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 nozzle ESC Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 nozzle ESC board? It is the electronic speed controller board, XAG part number 14-007-00098, that drives the nozzle motor on the XAG P150.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
My nozzle will not spin. Is it the ESC board? Turn the nozzle by hand first. If it turns freely and the wiring is sound, the board is the likely cause. If it is rough or seized, fix the nozzle.
Why fix a seized nozzle before fitting a new board? A seized motor can overload and damage a new board as soon as it tries to drive it.
Does it include the nozzle? No. The nozzle is a separate part, XAG part number 05-002-02065.
Is it the same as the propulsion motor ESC? No. This board drives the nozzle motor only.
What usually damages it? Moisture and residue through a damaged cover, heat, faults in the nozzle motor or wiring, and impacts.
Can I fit it myself? With care. Power down, ground yourself against static, photograph connectors, handle the board by its edges and seal the enclosure.
How do I check the repair? Power up with no nozzle faults and run a water test to confirm the nozzle runs smoothly.
Could the cable be the problem? Yes. Corroded connectors and broken wires look like a dead board. Check them first.
Why do boards fail after washing? Water that reaches the board through a cracked cover or missing seal corrodes components and connectors.
Does it come with a cover? No. Reuse the original enclosure, and replace it if it is cracked.
What is its current rating? It is not published for this part.
How should I store a spare? In its anti-static packaging, dry and away from heat.
Will a P150 Max board fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Several nozzle boards have failed. Why? Look for a common cause such as damaged enclosures, missing seals or direct wash-down spray.
Does it need setup after fitting? Follow any steps the aircraft calls for, then confirm normal nozzle operation.
How do I confirm the part number? Look for XAG part number 14-007-00098, or send us a photograph of the board and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega