Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P150 OEM Seesaw Bolt, XAG part number 02-002-12103, is the pivot bolt of a seesaw joint on the XAG P150 (2024) agricultural drone. A pivot bolt does a different job from an ordinary fastener. It is not only there to hold two parts together; it is the axle that one part swings on. That means it wears where an ordinary bolt does not, and a worn pivot bolt can give play in the joint even when it is fully tight. Operators reach it through searches such as P150 seesaw bolt, XAG P150 pivot bolt, P150 seesaw pin, or XAG P150 seesaw joint.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
The quantity per pack is not published for this part. Check the listing quantity, or ask us and we will confirm before dispatch.
Not included: the parts the bolt pivots, nuts or washers unless supplied under this part number, the propeller post (02-002-12169), the M6 non-metallic insert hex cap nut (02-004-01319), or tools.
A seesaw joint lets one part pivot about a fixed point, like the beam of a playground seesaw on its centre. The pivot needs an axle, and on this joint of the P150, that axle is the seesaw bolt. It passes through the pivoting part and holds it in place, while allowing it to swing as the design intends.
The specific joint that uses this bolt is not published for this part. Match it to the bolt you removed, or send us a photograph of the joint and we will confirm.
Because the bolt is an axle, its shank is a bearing surface. Every movement of the joint rubs the pivoting part against the bolt. Over many hours, especially with dust, grit and spray residue in the joint, that rubbing wears the shank. A worn shank is smaller than it should be, and the joint develops play: movement that is not part of the designed swing, felt as slop, clicking or rattling.
That is the key point about a seesaw bolt. Tightness does not prove it is good. An ordinary bolt that is tight is doing its job. A pivot bolt can be fully tight and still worn on its shank, so that the joint has play. Checking a pivot means checking for play, not only for tightness.
Pivot bolts can also bend, if the joint takes an impact, which makes the joint stiff, notchy or bound up. And the threads can be damaged from repeated removal, so the bolt will not hold its nut properly.
Play in a pivot joint grows over time. The more the joint moves where it should not, the faster the bolt and the holes it passes through wear. A worn bolt left in service can enlarge the holes in the parts it pivots, turning a small bolt replacement into a larger repair.
Keeping the joint clean helps. Grit in a pivot acts as an abrasive, so washing residue out of the joint and checking it for play at each service slows wear considerably.
When a seesaw bolt is replaced, the nut that holds it should be checked as well. A self-locking nut that has been used several times may no longer hold reliably.
Where it sits. In a seesaw pivot joint on the P150; specific location not published for this part.
What it connects to. The pivoting part, the structure it pivots against, and the nut that retains it.
What wears it out. Joint movement. Grit and residue in the pivot. Impacts. Repeated removal.
What this part is not. It is not the propeller post, the nut or the parts it pivots.
The seesaw bolt is the axle of a seesaw pivot joint.
A sound seesaw bolt provides:
Its value is in letting the joint move only as it should.
A pivot bolt can be fully tight and still worn. Check the joint for play, not just the bolt for tightness.
If the bolt is worn on its shank, bent or damaged at its threads, this seesaw bolt is the part. Replace its nut if it no longer locks firmly.
Seesaw bolt replacement is the likely answer when an operator or technician observes:
These come from joint movement, grit, impacts and repeated removal.
These are not seesaw bolt symptoms, and this part will not fix them. Oval or enlarged holes in the pivoting parts need those parts replaced. A cracked pivoting part needs that part. A nut that will not lock needs a new nut. A new bolt restores the axle; it does not repair holes the old one has already worn.
Product name: XAG P150 OEM Seesaw Bolt
XAG part number: 02-002-12103
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Seesaw pivot joint
Component type: Pivot bolt
Installed position: In a seesaw pivot joint; not published for this part
Function: Serves as the axle of the seesaw joint
Thread size, length and diameter: Not published for this part
Material: Not published for this part
Quantity per pack: Not published for this part
Installation method: Direct replacement through the pivot
Classification: Genuine XAG OEM pivot bolt
Condition: Brand new
Before installation
During installation
After installation
The seesaw bolt is a wear part in a moving joint.
Service centres often replace pivot bolts on condition as soon as play appears, because a bolt changed early protects the holes it passes through.
This is not the part you need if the bolt is sound and the play comes from worn holes in the pivoting parts, or a loose nut cures it. Check tightness and inspect the bolt and holes first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your bolt; this one is identified for the P150.
A pivot joint is meant to move in one way only. The seesaw bolt is what makes sure it does. When the bolt wears, the joint starts to move in ways it was never designed to.
The trap is that a worn pivot bolt can still be tight. A check that only looks for loose fasteners will pass it. Checking for play is what finds it.
Play grows. The more a joint moves where it should not, the faster it wears, and the wear spreads from the bolt into the holes around it. A bolt replaced early is a small job; enlarged holes mean replacing the parts around it.
Keeping pivots clean slows wear considerably. Grit in a joint is an abrasive, and washing it out at each service extends the life of the bolt and the parts it carries.
Replacing a worn seesaw bolt restores a joint that moves freely where it should and not at all where it should not.
For crews running several aircraft, noting when pivot bolts are replaced shows how quickly joints wear in their conditions and makes the next replacement predictable.
A sound seesaw bolt restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Seesaw Bolt
XAG part number: 02-002-12103
Brand: XAG
Component: Seesaw pivot bolt
Category: Pivot hardware
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Installed position: In a seesaw pivot joint
Primary function: Serving as the axle of the seesaw joint
Characteristic failure modes: Worn shank, bending, damaged threads
Distinguishing diagnostic rule: A pivot bolt is checked for play, not only for tightness
Common causes: Joint movement, grit and residue, impacts, repeated removal
Wear driver: Hours of joint movement and grit in the pivot
Related parts: Propeller post 02-002-12169, M6 non-metallic insert hex cap nut 02-004-01319
Quantity per pack: Not published for this part
Not included: Pivoting parts, nuts and washers unless supplied, tools
Fitment method: XAG part number 02-002-12103 plus length, diameter and head against the removed bolt
Verification after fitting: Joint moves freely; no play outside designed movement; nut locked
Inspection habit: Clean pivot joints and check for play at every service
Condition: Brand new
Part classification: Genuine XAG OEM pivot bolt
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 seesaw bolt
XAG 02-002-12103
02-002-12103 seesaw bolt
XAG P150 OEM seesaw bolt
P150 seesaw bolt replacement
XAG P150 pivot bolt
XAG P150 seesaw pin
XAG P150 seesaw joint
P150 joint play clicking
XAG P150 pivot wear
XAG P150 hardware
XAG P150 fasteners
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 seesaw bolt Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 seesaw bolt? It is the pivot bolt, XAG part number 02-002-12103, that serves as the axle of a seesaw joint on the XAG P150.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
Which joint does it go in? The specific joint is not published for this part. Match it to the bolt you removed, or send us a photograph and we will confirm.
My seesaw bolt is tight. Can it still be worn? Yes. A pivot bolt can be fully tight and worn on its shank. Check the joint for play.
How do I check for play? Hold the fixed side and try to move the pivoting part in directions it should not move. Slop, clicking or rattling means wear.
How many bolts come in a pack? The quantity is not published for this part. Check the listing quantity or ask us to confirm.
Does it include the nut? Only if supplied under this part number. Check the listing, and replace a nut that no longer locks firmly.
What wears it out? Joint movement, grit and residue in the pivot, impacts and repeated removal.
The holes around the bolt are oval. Will a new bolt fix that? No. Enlarged holes need the pivoting parts replaced.
Can I use an ordinary bolt instead? Not recommended. A pivot bolt's shank is a bearing surface, and the wrong bolt may wear quickly or fit loosely.
Can I fit it myself? Yes. Photograph the joint, support the pivoting part, clean the joint and fit the new bolt with parts in their original order.
How tight should it be? Secure, with the joint still moving freely through its designed range.
How do I check the repair? The joint moves freely, has no play outside its designed movement, and the nut is locked.
Will a P150 Max bolt fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
How can I make it last longer? Clean grit from the joint and check it for play at every service.
Is it the same as the propeller post? No. The propeller post is XAG part number 02-002-12169, a separate part.
What are its dimensions? They are not published for this part. Match against the bolt you removed.
How do I confirm the part number? Look for XAG part number 02-002-12103, or send us a photograph of the joint and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega