Confirmação #
Obrigado, !
Seu pedido está confirmado.
XAG
Não foi possível carregar a disponibilidade de retirada.
The XAG P150 OEM Unidirectional Valve & Nozzle Liquid Transfer Pipe, XAG part number 14-007-00013, is the liquid transfer pipe that runs from the unidirectional (one-way) valve to the nozzle in the application system of the XAG P150 (2024) agricultural drone. It is the last link before the spray, downstream of the valve. When spraying stops, the valve closes and this pipe is meant to stay full and sealed, ready for the next pass. If a nozzle keeps dripping after spraying has stopped, or leaves a wet trail when the aircraft turns at the end of a row, the fault lies downstream: in the valve or in this pipe. Operators reach it through searches such as P150 valve to nozzle pipe, XAG P150 nozzle liquid pipe, P150 nozzle dripping, or XAG P150 drip after shutoff.
Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.
Not included: the unidirectional valve, the motor side & one-way valve liquid transfer pipe (14-007-00012), the nozzle, the nozzle disc (02-001-09892), or tools.
Each spraying point on the P150 is fed through a short chain: a supply pipe to a unidirectional valve, then this pipe from the valve to the nozzle. The valve lets liquid flow toward the nozzle and stops it flowing back. When spraying stops, the valve closes, and the short section of pipe between the valve and the nozzle is meant to stay sealed and full.
That is what gives a clean shutoff. When the aircraft reaches the end of a row and spraying stops, the nozzle should stop delivering liquid almost at once. When the next pass starts, liquid is already at the nozzle, so spraying starts at once too.
The exact route of this pipe is not published for this part. The supply pipe on the other side of the valve, from the motor side, is a separate part with its own XAG number. Match this pipe by XAG part number and against the pipe you remove.
When this pipe fails, the clean shutoff is lost. A crack or split in the pipe, or a joint that is not fully sealed, lets liquid escape downstream of the valve. The nozzle, or the pipe beside it, keeps dripping after spraying has stopped. At the end of each row, the aircraft leaves a wet trail as it turns. Product is wasted, and drips can land where they should not, on headlands, crops outside the target area or the aircraft itself.
The same symptom can also come from a valve that no longer seals. Checking where the liquid is coming from separates the two. If drips form along this pipe or at its joints, the pipe is the cause. If the pipe is dry and liquid still reaches the nozzle after shutoff, the valve is not closing.
This pipe sits right at the nozzle, so it shares the nozzle's wet, residue-laden environment and is handled whenever the nozzle is serviced. Chemicals and sun harden it; handling and disconnection stress its ends.
When replacing it, route it exactly as the original, seat both ends fully, and confirm that the nozzle stops cleanly when spraying stops.
Rinsing the system with clean water after every job slows chemical ageing of the pipe and keeps deposits from holding the valve open.
Where it sits. Between the unidirectional valve and the nozzle; exact route not published for this part.
What it connects to. The unidirectional valve at one end and the nozzle at the other.
What wears it out. Chemical, sun and heat ageing. Handling during nozzle service. Split ends. Poorly sealed joints.
What this part is not. It is not the valve, the supply pipe or the nozzle.
The unidirectional valve and nozzle liquid transfer pipe carries liquid from the valve to the nozzle and holds it there between passes.
A sound liquid transfer pipe provides:
Its value is in a clean stop as well as a clean start.
Drips after shutoff come from downstream of the valve. Find whether the pipe or the valve is the source.
If the pipe is cracked, split, hardened or leaking at its joints, this pipe is the part.
Liquid transfer pipe replacement is the likely answer when an operator or technician observes:
These come from ageing, handling, split ends and poor sealing.
These are not liquid transfer pipe symptoms, and this part will not fix them. A valve that will not close needs the valve. A slow start at each pass points upstream, at the supply pipe. A blocked nozzle needs cleaning. An unbalanced disc needs the disc. A new pipe restores the path from valve to nozzle only.
Product name: XAG P150 OEM Unidirectional Valve & Nozzle Liquid Transfer Pipe
XAG part number: 14-007-00013
Brand: XAG
Aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
System: Application system, liquid path
Component type: Liquid transfer pipe
Connects: Unidirectional valve to the nozzle
Function: Carries liquid from the valve to the nozzle
Not interchangeable with: Motor side & one-way valve liquid transfer pipe 14-007-00012
Quantity: 1 × pipe
Length, diameter and material: Not published for this part
Installation method: Fitted between its connections along the original route
Classification: Genuine XAG OEM application system part
Condition: Brand new
Before installation
During installation
After installation
The valve-to-nozzle pipe gives each nozzle a clean stop.
Service centres trace drips to their source before replacing anything, because drips after shutoff can come from either the valve or the pipe after it.
This is not the part you need if the pipe is dry and the valve is not closing, or the fault is a slow start rather than a drip. Run a water test and watch where liquid appears first, while that information is still cheap. And if your aircraft is a P150 Max, confirm the part number on your pipe; this one is identified for the P150.
A clean shutoff matters as much as a clean start. Drips at row ends waste product and can land where they should not.
When a nozzle drips after spraying stops, the fault is downstream of the valve. Checking this pipe and the valve separately finds the cause quickly.
Replacing a cracked or leaking pipe restores a sealed path and a clean stop at every row end.
Routing the pipe correctly and seating both ends fully keeps it sealed for its whole life.
Rinsing after every job slows chemical ageing and keeps the valve free of deposits.
For crews working near boundaries or sensitive crops, a clean shutoff on every nozzle is part of applying responsibly.
A sound unidirectional valve and nozzle liquid transfer pipe restores:
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.
Canonical product name: XAG P150 OEM Unidirectional Valve & Nozzle Liquid Transfer Pipe
XAG part number: 14-007-00013
Brand: XAG
Component: Unidirectional valve and nozzle liquid transfer pipe
Category: Application system liquid path
Compatible aircraft: XAG P150 (2024)
Not confirmed for: XAG P150 Max
Product line: XAG agricultural drones
Connects: Unidirectional valve to the nozzle
Primary function: Carrying liquid from the valve to the nozzle
Characteristic failure modes: Cracks, split ends, hardening, leaking joints
Distinguishing diagnostic rule: Drips after spraying stops point downstream of the valve, at the valve or this pipe
Common causes: Chemical ageing, handling, split ends
Wear driver: Chemical exposure and nozzle servicing
Not interchangeable with: Motor side & one-way valve liquid transfer pipe 14-007-00012
Related parts: Nozzle disc 02-001-09892
Not included: Valve, supply pipe, nozzle, tools
Fitment method: XAG part number 14-007-00013 plus length and ends against the removed pipe
Verification after fitting: Joints dry; nozzle stops cleanly without dripping
Condition: Brand new
Part classification: Genuine XAG OEM application system part
Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
XAG P150 unidirectional valve nozzle liquid transfer pipe
XAG 14-007-00013
14-007-00013 liquid transfer pipe
XAG P150 OEM nozzle pipe
P150 valve to nozzle pipe replacement
XAG P150 nozzle liquid pipe
XAG P150 nozzle dripping
XAG P150 drip after shutoff
P150 wet trail at row end
XAG P150 spray pipe
XAG P150 application system parts
XAG P150 spray system parts
XAG P150 OEM parts
XAG P150 replacement parts
XAG P150 repair parts
XAG agricultural drone parts
XAG spray drone parts
genuine XAG OEM parts
agricultural drone parts USA
XAG parts free shipping
XAG parts same day shipping
Ares Acres
Ares Acres LLC
XAG parts Albuquerque
XAG parts New Mexico
XAG P150 nozzle pipe Canada
XAG P150 parts Canada
XAG drone parts shipped to Canada
buy XAG P150 parts in Canada
What is the XAG P150 unidirectional valve and nozzle liquid transfer pipe? It is the pipe, XAG part number 14-007-00013, that carries liquid from the one-way valve to the nozzle on the XAG P150.
Which aircraft does it fit? The XAG P150 (2024). It is not confirmed for the P150 Max.
My nozzle keeps dripping after spraying stops. Why? The fault is downstream of the valve: either this pipe is leaking or the valve is not closing.
How do I tell which? Run a water test. Drips along the pipe point at the pipe; a dry pipe with a dripping nozzle points at the valve.
Is it the same as the supply pipe? No. The supply pipe, from the motor side to the valve, is 14-007-00012.
One branch starts late. Is it this pipe? Less likely. A slow start points upstream, at the supply pipe.
Does it include the valve? No. It is the pipe only.
Why does a clean shutoff matter? Drips at row ends waste product and can land outside the target area.
Can I fit it myself? Yes. Drain and rinse, route the new pipe as the original and seat both ends fully.
How do I check the repair? The joints are dry and the nozzle stops cleanly when spraying stops.
What ages these pipes? Chemicals, sun and heat, and handling during nozzle service.
Will a P150 Max pipe fit? Do not assume so. Match the XAG part number; this one is identified for the P150.
Should I check the valve too? Yes. Deposits can hold a valve open.
Should I wear protection? Yes. Gloves and eye protection, as residue may remain.
How can I make it last? Rinse the system after every job and inspect pipes at the nozzle at every service.
Can I use generic tubing? Not recommended. Diameter, wall and chemical resistance may differ.
What length is it? The length and diameter are not published for this part. Match against the pipe you removed.
How do I confirm the part number? Look for XAG part number 14-007-00013, or send us a photograph of the pipe and we will confirm the match.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Conferido com seu carrinho da Shopify em tempo real.
Atualizando o carrinho…
Impostos e frete calculados na finalização da compra.
Assistente com atendente ao vivo · Pagamento seguro
ou pague com
Insira seu cartão e pague · Processado pelo PayPal
PayPal Express · Pagamento seguro com PayPal · Proteção ao comprador
Esvaziar carrinho popupConfirmação #
Seu pedido está confirmado.
Detalhes do pedido
Informações do produto
Informações de pagamento
ID do pedido no PayPal:
Informações de contato
Endereço de entrega