Battery Motherboard with Lid Program — DJI Agras T50 / T40 (DB1560 Board, Battery Included)

DB1560 Battery Motherboard with protective lid for DJI Agras T50 / T40 — technician-programmed, sealed in its factory configuration, and deployed with a working DB1560 battery so a misdiagnosis cannot leave you grounded. Technical overview.

DJI Agras DB1560 battery motherboard with lid, black housing with screw holes

1. Program Abstract

This is the sealed board-first tier. The DB1560 Battery Motherboard with its matching protective lid is the product: the genuine DJI battery management board, bench-programmed to your aircraft and closed in the configuration the platform was engineered with. A working, capacity-verified DB1560 Intelligent Flight Battery is included for the full deployment at no additional charge — insurance against the one thing that makes a board order go wrong.

Dispatch is within one business day, with a 24 to 48 hour return-to-flight target for U.S. operators.

2. Why the Battery Ships With the Board

An operator ordering a battery motherboard has usually already made the call: the aircraft will not recognize the pack, the charger will not complete, communication faults keep appearing. That reasoning is sound — but board and cell failures present identically from the operator's seat, and the cost of being wrong is a second transit cycle with the aircraft still on the ground.

Including the battery removes the failure mode. Whichever component actually failed, the box contains a working replacement for it. Install the verified pair, verify, fly — and diagnose the original in the off-season when being wrong costs an afternoon rather than a contract.

3. Why the Lid Tier Exists

A battery motherboard on an agricultural aircraft operates in one of the harshest electronics environments in civilian aviation: chemical spray drift, dust, moisture, pressure-washer cleandowns, temperature swings, and continuous vibration. Each is a known killer of exposed PCBs — corrosion at connector pins, conductive residue bridging traces, fatigue at solder joints.

The matching lid returns the board to the sealed configuration DJI engineered around. For any deployment longer than a short repair window — and for every board that will live on a working rig through a season — the sealed configuration is the correct engineering choice, independent of price. An unsealed board on a spray rig is a candidate to become your next failure rather than the fix for your last one.

4. What Ships

  • 1 × Original DB1560 Battery Motherboard — genuine DJI battery management board, technician-programmed to your aircraft profile before dispatch
  • 1 × Matching protective lid — seals the board in its factory configuration; fitted and seal-checked on the exact board you receive
  • 1 × DB1560 Intelligent Flight Battery — 30,000 mAh, model BAX702-30000mAh-52.22V, 52.22 V nominal, with integrated BMS, included for the full deployment
  • Pack-to-board communication verification on the bench before the box closes
  • Photographed and serial-recorded outbound system
  • Battery-safe packaging, tracked, free shipping both directions

5. Technical Specifications

Board Original DJI DB1560 battery management board
Board protection Matching protective lid — factory sealing configuration
Board function Aircraft and charger communication, cell monitoring, charge coordination and protection, status and fault reporting
Included battery DB1560, 30,000 mAh, BAX702-30000mAh-52.22V, 52.22 V nominal
Aircraft compatibility DJI Agras T50, DJI Agras T40
Pre-deployment prep Board programmed and communication-verified, lid fit and seal checked, pack capacity and cycle verified
Monthly program fee $899.99
Fulfillment U.S. warehouse, one-business-day dispatch, tracked, free shipping both directions

6. Pre-Deployment Programming Protocol

  • Step 1 — Aircraft profile intake: your aircraft details are collected at enrollment.
  • Step 2 — Board programming: technicians program the DB1560 motherboard against that profile.
  • Step 3 — Lid fit and seal check: the protective lid is fitted and verified on the exact board you receive.
  • Step 4 — Pack verification: the included battery is capacity-checked and cycle-reviewed.
  • Step 5 — Integration check: pack and board verified communicating as a platform.
  • Step 6 — Serialization and record: photographed and logged by serial before the box closes.

7. Deployment Timeline

  • T+0: Enrollment received. Board assigned to your aircraft profile; programming begins.
  • Within one business day: System dispatched with tracking.
  • T+24–48 hours: Target return-to-flight.
  • End of deployment: Return the system with issued documentation; billing ends with the inspected return. Free return shipping.

8. Symptoms That Point at the Board

  • The aircraft does not recognize a battery it previously accepted
  • The charger refuses the pack or will not complete a cycle
  • Battery communication errors at the aircraft
  • Diagnostic fault codes reported by the pack
  • Battery warning messages that persist regardless of charge state
  • Corrosion, moisture intrusion, or heat discoloration around the board area — which is usually also evidence of a sealing failure
  • A missing, cracked, or poorly seating motherboard lid

Refusal points at the board, shortfall points at the cells. This program covers the first case, and because the battery is included, it covers the second as well.

9. Program Mechanics

  • $899.99/month, flat, with the battery included for the full deployment. Free U.S. shipping both directions.
  • Deployment length is operator-controlled — one month to a full season. No minimum term.
  • Return the system when your need ends; monthly billing ends with the inspected return.
  • Permanent acquisition (buyout) available at any point.

10. Service Guarantees

  • Service Delivery Guarantee — priority access to replacement systems from our in-stock U.S. fleet for the life of your enrollment.
  • Dispatch Guarantee — in-stock systems ship within one business day, tracked, every time.
  • USA Compatibility Guarantee — programmed and verified for U.S. DJI Agras T50 / T40 aircraft.
  • Satisfaction Guarantee — if the system does not perform in your aircraft, we make it right.

11. Frequently Asked Questions

How is this different from the $799.99 board tier?
The protective lid. The base board tier deploys the programmed board plus battery; this tier adds the lid that seals the board in its factory configuration. Short bench repair: base tier is fine. Board living on a working rig for a season: sealed tier, on engineering grounds.

Is the battery really included?
Yes, for the full deployment, at no additional charge — so a wrong diagnosis does not cost you a second shipping cycle.

What do you need from me at enrollment?
Your aircraft details, so the board can be programmed to your system. Minutes, not paperwork.

Can I convert to ownership?
Yes — ask about the buyout option at any point during your deployment.

What about T100 / T70P aircraft?
See the DB2160 board program.

12. About Ares Acres

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller. Real inventory, real technicians, real phone support — operators serving operators.

→ Enroll: T50/T40 DB1560 Battery Motherboard with Lid + Battery — $899.99/month