DJI Agras T100 OEM D14000iE Zongshen Generator Governor Gear Bracket (YC.DZ.GR000705)

DJI Agras T100 OEM D14000iE Zongshen Generator Governor Gear Bracket (YC.DZ.GR000705) — the zinc-plated stamped-steel bracket that carries the mechanical governor gear assembly inside the crankcase of the DJI Agras D14000iE inverter generator, DJI material number YC.DZ.GR000705. D14000iE governor gear bracket, Zongshen governor mount, DJI Agras generator engine speed control hardware.

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI material number YC.DZ.GR000705 — verified against the DJI Agras parts documentation for the D14000iE Zongshen engine build
• Supplier-listed fitment: DJI Agras D14000iE multifunctional inverter generator
• Zinc-plated stamped-steel bracket that carries the mechanical governor gear assembly inside the crankcase, as pictured
• Brand new condition — never installed, never run

📦 Package Includes

• 1 × Governor Gear Bracket (YC.DZ.GR000705)

🔧 Component Overview

The DJI Agras T100 OEM D14000iE Zongshen Generator Governor Gear Bracket, DJI material number YC.DZ.GR000705, is the zinc-plated stamped-steel bracket that carries the mechanical governor gear assembly inside the crankcase of the engine in the DJI Agras D14000iE multifunctional inverter generator — the field charging station that keeps a T100, T70P or T55 battery rotation supplied away from shop power. It is a small, plain piece of formed and plated steel, and it sits inside the engine doing the same kind of job the flow meter bracket does on a spray boom: it holds something important exactly where the design put it.

What it holds is the engine's speed control. A mechanical governor is what keeps this engine at its governed speed as electrical load comes and goes, and on a charging generator load comes and goes constantly — packs go on, packs come off, and the engine has to hold its speed through all of it. For a fleet operator, that stability is not a comfort feature. Governed speed is what the inverter and the charging output are built around, and an engine that hunts or surges under load is an engine whose output is moving when it should be steady. This bracket is a small part of a system that matters far more than its price suggests.

⚙️ Functional Purpose

The bracket's job is location and rigidity. A mechanical governor senses engine speed through a flyweight assembly driven by a gear inside the crankcase, and turns that sensed speed into a mechanical movement that acts on the throttle. All of that only works if the gear turns true, meshes correctly with its drive, and stays square under load and vibration. The bracket is the fixed reference that makes that possible — it holds the gear and its shaft in position, takes the reaction loads out of the governor mechanism, and keeps the geometry constant for thousands of hours of running.

What degrades when it fails is the quality of the speed signal. A bracket that is bent, cracked, or working loose lets the gear move relative to its drive, which introduces play into the mechanism and noise into what should be a clean, continuous measurement of engine speed. The governor then chases a signal that is partly real and partly slop, and the engine surges or hunts instead of settling. Left alone, the movement wears the bracket's own holes and shaft bore oval, which makes the play worse, which makes the movement worse. It is a self-accelerating fault, and because it lives inside the crankcase it is not one anybody finds by looking.

⚠️ Common Replacement Indicators

• Unstable engine speed, surging or hunting under charging load
• A governor that no longer holds steady speed as electrical load changes
• Slop, free play or lost motion felt in the governor mechanism
• A bent, cracked, distorted or fatigued bracket found at teardown
• Elongated or worn bracket mounting holes and shaft bore
• Corrosion under damaged zinc plating, or loose or damaged bracket fasteners

Confirm before you order: this part is DJI material number YC.DZ.GR000705, supplier-listed for the DJI Agras D14000iE multifunctional inverter generator in the Zongshen engine build. DJI dual-sourced these generator engines, so read the engine label on your own unit before ordering and match on the base material number rather than on appearance — small stamped brackets look alike, and a revision suffix such as .01 or .F still indicates the same base part. Before pulling an engine apart over a surging complaint, rule out the ordinary causes first: fuel delivery, a restricted air filter, a sticking throttle linkage, and the external governor linkage and spring adjustment. Only once those are clean is it worth opening the crankcase to inspect the gear, the shaft and this bracket together.

Why it fails: not from wear in normal service — usually as a consequence of something else. Continuous engine and frame vibration works the bracket and its fasteners for thousands of hours, and a fastener that backs off lets the bracket move and elongate its own holes. Wear in the governor gear, shaft or flyweights puts loads into the bracket that it was never meant to carry. Debris from another internal failure can bend or distort thin stamped steel outright. Corrosion gets under plating that has been scratched during a previous teardown, and the repeated handling of teardown and rebuild bends light brackets easily. On a charging generator that runs long, hot, vibrating hours through a compressed season, all of that adds up faster than it would on a machine that works occasionally.

Post-install checklist: inspect the new bracket before you fit it — confirm it is flat, undistorted and free of shipping damage, confirm the plating is intact, and offer it up to check the holes and shaft bore against the gear and shaft it will carry. Do not fit a new bracket to worn governor components; inspect the gear, shaft and flyweight assembly at the same time and replace what is worn, because a new bracket carrying tired parts will not restore governing. Assemble to the DJI and Zongshen service documentation, following its torque sequences, torque values, gear mesh requirements and clearances rather than any figure quoted from memory. Then inspect again before the case closes: confirm the gear turns freely and meshes correctly, confirm there is no free play at the bracket, and confirm every fastener is torqued and secured. After reassembly set the governed speed to specification, run the generator up under real charging load, and confirm the speed holds steady as packs are added and removed before it goes back on the line.

📐 Specifications

Part: Governor Gear Bracket

Material Number: YC.DZ.GR000705

Fits: DJI Agras D14000iE Multifunctional Inverter Generator (field charging station for DJI Agras T100, T70P, and T55 operations)

Engine Build: Zongshen (supplier-listed)

Description: Zinc-plated stamped-steel bracket carrying the mechanical governor gear assembly inside the crankcase, as pictured

Quantity: 1 bracket

Condition: Brand new

Safety caution: this is an engine-internal component fitted inside the crankcase. Let the engine cool completely before any work begins — an air-cooled engine holds heat long after shutdown. Drain the engine oil and the fuel system before the crankcase is opened, and disconnect the battery before removing or refitting anything electrical. Follow the DJI and Zongshen service documentation for torque sequences, torque values, gear mesh and running clearances, and for setting governed speed after reassembly; do not substitute figures from another engine or from memory.

🚜 Necessary For

• Curing surging or hunting traced to play in the governor mechanism
• Replacing a bent, cracked or distorted bracket found at crankcase teardown
• Rebuilding the governor assembly alongside a worn gear, shaft or flyweights
• Restoring stable governed speed on a generator whose output wanders under load
• Full engine rebuild or pre-season overhaul on a high-hour D14000iE charging unit

💡 Why This Part Matters

A charging generator is judged on one thing: whether it holds steady while the load underneath it keeps changing. Packs go on, packs come off, and the engine is expected not to care. That steadiness is the governor's work, and the governor can only be as good as the geometry it is mounted in. This bracket is the cheapest component in that chain and the one nobody thinks about until an engine starts hunting and the whole crew is standing around a generator that will not settle. It is a small piece of plated steel with a job that shows up directly in charging throughput — and when the crankcase is already open, replacing it is the easiest decision on the bench.

Hold the gear. Steady the speed. Charge the packs. Fly the field.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM D14000iE Zongshen Generator Governor Gear Bracket (YC.DZ.GR000705)

DJI material number: YC.DZ.GR000705

Component: Governor Gear Bracket

Product category: Generator Parts

Compatible aircraft: DJI Agras T100

Condition: Brand new

Quantity supplied: 1 bracket

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: YC.DZ.GR000705; DJI YC.DZ.GR000705; YC.DZ.GR000705 DJI Agras; DJI Agras T100 Governor Gear Bracket; T100 Governor Gear Bracket; DJI T100 governor gear bracket replacement; DJI Agras Governor Gear Bracket; Governor Gear Bracket OEM; Governor Gear Bracket replacement part

Definition: The Governor Gear Bracket (DJI material number YC.DZ.GR000705) is the genuine DJI OEM component on the DJI Agras T100, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.DZ.GR000705. Confirm the aircraft model is DJI Agras T100 before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

YC.DZ.GR000705

DJI YC.DZ.GR000705

YC.DZ.GR000705 replacement

DJI Agras YC.DZ.GR000705 part

DJI Agras Governor Gear Bracket

Governor Gear Bracket OEM

governor gear bracket replacement

governor gear bracket for sale

DJI Governor Gear Bracket

T100 Governor Gear Bracket

DJI T100 Governor Gear Bracket

DJI Agras T100 Governor Gear Bracket OEM

Generator Parts

DJI Agras Generator Parts

T100 Generator Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

What is the DJI Agras D14000iE Zongshen generator governor gear bracket? It is the zinc-plated stamped-steel bracket that carries the mechanical governor gear assembly inside the crankcase of the DJI Agras D14000iE multifunctional inverter generator, DJI material number YC.DZ.GR000705. It holds the governor gear on its shaft in the correct position and mesh relative to its drive.

What is the material number for this governor gear bracket? YC.DZ.GR000705, read directly from the supplier listing and verified against the DJI Agras parts documentation for the D14000iE Zongshen engine build.

Which generator does it fit? Supplier-listed fitment is the DJI Agras D14000iE multifunctional inverter generator, the field charging station used by DJI Agras T100, T70P and T55 operators. Confirm your unit is a D14000iE and match the base material number before ordering.

What does the governor gear bracket do? It locates the governor. A mechanical governor senses engine speed through a flyweight assembly driven off a gear inside the crankcase, and converts that speed signal into a mechanical output that moves the throttle. The bracket is the fixed reference that holds the gear and its shaft in the right place, in the right mesh, and square to their drive, so that the speed signal the governor produces is a true one.

What are the signs it needs replacing? Unstable engine speed, surging or hunting under charging load, a governor that no longer holds a steady speed as load changes, slop or free play felt in the governor mechanism, a bent, cracked or distorted bracket found at teardown, worn or elongated bracket holes and shaft bore, corrosion through the zinc plating, and loose or damaged bracket fasteners inside the crankcase.

Why do these brackets fail? They are not a wear item in normal service, so failure is usually a consequence of something else. Continuous engine vibration works the bracket and its fasteners for thousands of hours, and a fastener that loosens lets the bracket move and elongate its own holes. Wear in the gear or shaft it carries puts load into the bracket it was not meant to take. Debris from another internal failure can bend or distort it, corrosion can get under damaged plating, and repeated teardowns bend thin stamped steel easily.

How is the governor gear bracket replaced? It lives inside the crankcase, so this is internal work, not a bolt-on repair. Let the engine cool completely, drain the oil and fuel, disconnect the battery, and open the crankcase per the service procedure. Replace the bracket together with any worn governor gear, shaft or flyweight components rather than on its own, because a new bracket carrying worn parts will not restore governing. Follow the DJI and Zongshen service documentation for torque sequences, torque values, gear mesh and clearances, then set governed speed to specification after reassembly.

Which DJI Agras models does this component fit? Listed fitment is DJI Agras T100. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

Where can I buy a DJI Agras D14000iE governor gear bracket in the USA? Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, stocks D14000iE Zongshen generator governor gear bracket YC.DZ.GR000705 brand new, with free and fast U.S. shipping plus same-day shipping and tracking on in-stock parts.