DJI Agras T100 OEM D14000iE Zongshen Generator Muffler Outer Cover (Upgraded) (YC.DZ.GR000623)

D14000iE ZONGSHEN Generator Muffler Outer Cover (Upgraded) | DJI Material Number YC.DZ.GR000623 | Exhaust Heat Shield | ZONGSHEN Engine Build Only | Brand New Field-Ready OEM Replacement

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

The exhaust is the hottest thing on a DJI Agras D14000iE Multifunctional Inverter Generator, and the muffler outer cover is the shield standing between that heat and everything around it. The D14000iE is the charging generator supporting the DJI Agras T100 and T70P, which means it runs long and it runs hard — parked at the edge of a field with a crew working within arm's reach of it all day, batteries coming off and going on, hoses and wiring routed through the same bay. With the cover intact and mounted, none of that is a problem and nobody thinks about it. Cracked, warped, loose, or gone, and the hottest surface on the machine is exposed on a unit people reach past a hundred times a day.

That is the economics this cover exists to protect, and it is not really about the cover. A burn is a crew problem, not a parts problem. Radiated heat reaching a wiring harness or a hose is a parts problem, and it is a considerably larger one than the shield that was supposed to stop it — melted insulation and heat-hardened hose do not announce themselves until something quits, usually in the middle of a charging rotation with aircraft waiting on packs. A muffler outer cover is one of the least expensive components in the exhaust area of the machine, and it is the only one whose entire job is keeping heat where it belongs.

We use specialized technicians to deliver the D14000iE ZONGSHEN Muffler Outer Cover (Upgraded) ordered.

That is why Ares Acres stocks D14000iE exhaust components and ships them fast inside the U.S.A. A cracked heat shield is the kind of finding that turns up during a teardown or a pre-season inspection, and it needs a part number the same week, not in a month. DJI also dual-sourced these generator engines, so the published breakdown splits between RATO and ZONGSHEN builds all the way down through pistons, gaskets, sensors, controllers, and panels. This listing is the ZONGSHEN part, YC.DZ.GR000623. Keeping the correct numbers on the shelf for both builds is what turns a same-day question into a same-day answer.

For professional farmers, aerial applicators, and commercial drone operators, this cover is burn-and-harness protection at shield money.

Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × Original D14000iE ZONGSHEN Muffler Outer Cover (Upgraded) (YC.DZ.GR000623)
• Genuine DJI Agras generator exhaust heat shield
• Upgraded specification as published by DJI
• ZONGSHEN engine build specification — listed verbatim on the published D14000iE ZONGSHEN parts breakdown
• Brand new condition — never installed, never run
• OEM protective packaging

---

🔧 Component Overview

The DJI Agras D14000iE ZONGSHEN Generator Muffler Outer Cover (Upgraded), DJI material number YC.DZ.GR000623, is the outer heat shield that surrounds the exhaust on the DJI Agras D14000iE Multifunctional Inverter Generator — the charging generator that supports the DJI Agras T100 and T70P in the field. It contains the heat radiating off the muffler and keeps that heat away from people and from the components sharing the bay with it. This is the upgraded specification carried on DJI's published ZONGSHEN parts breakdown.

It is a passive part with no moving pieces and no electrical connection, which is exactly why it gets overlooked. Nothing about the generator changes when the cover cracks. The engine starts the same, holds the same load, and charges the same packs. What changes is invisible until it is not: a surface that was covered is now open, and heat that was contained now goes wherever the geometry sends it. On a machine that lives outdoors, gets hauled between fields, and is worked around by people carrying batteries in both hands, that matters more than the part cost suggests.

The D14000iE Muffler Outer Cover is responsible for:

• Enclosing the exhaust area of the generator as an outer heat shield
• Containing heat radiating off the muffler body
• Keeping the hottest surface on the machine out of incidental contact
• Guarding crew and bystanders against contact burns during operation
• Shielding nearby wiring from radiated exhaust heat
• Shielding nearby hoses and lines from radiated exhaust heat
• Holding position on its mounting points through continuous engine vibration
• Absorbing knocks and contact that would otherwise reach the muffler itself
• Presenting the OEM shield geometry the generator bay was designed around
• Returning a serviced generator to DJI's published ZONGSHEN-build specification

Commercial agricultural operators put more hours on a charging generator in one season than most machines of this type see in years, and the cover is present for all of it, including:

• Full-day field charging to keep a T100 or T70P battery rotation supplied
• Continuous running under charging load through the heaviest weeks of the season
• Setup and teardown at every new job site
• Operation off truck beds, trailers, and bare ground
• Hauling between farms and fields on rough section roads
• Crews working within arm's reach of the machine all day
• Battery swaps carried past the generator with both hands full
• Dawn starts in the cold and afternoon running in full sun
• Fleet duty where one generator feeds several aircraft
• Weather-compressed application windows where the unit never gets to cool down

Through that duty, a generator muffler outer cover routinely takes on:

• Sustained radiated heat from the muffler it encloses
• Repeated heat cycling from cold start to full operating temperature and back
• Continuous engine and exhaust vibration transmitted through its mounting points
• Road shock and rack loading during transport between job sites
• Impact from tools, batteries, tailgates, and loading equipment
• Field dust and grit packing into and around the shield
• Rain, dew, and washdown water on hot and cooling surfaces
• Chemical overspray and drift settling on the generator body
• Corrosive residue left behind after a chemical day
• Being leaned on, stepped near, and used as a handhold it was never meant to be

Over enough seasons the outcomes are predictable, and they are mechanical rather than dramatic. Heat cycling and vibration work at the mounting points until the holes elongate and the shield no longer sits where it was fitted. A cover that has gone loose starts to rattle, and a rattling shield wears its own mounts faster while it does it. Impact during transport bends or dents a panel that then no longer follows the contour it was formed to. Corrosion takes the rest. None of that stops the generator. It just leaves an uncovered hot surface, a shield that moves when it should not, and heat finding paths it was never supposed to have.

A sound D14000iE Muffler Outer Cover helps maintain:

• Exhaust heat contained where the design intended it
• A machine that can be worked around safely all day
• Wiring kept clear of radiated exhaust heat
• Hoses and lines kept clear of radiated exhaust heat
• A shield that stays put instead of rattling against its mounts
• The muffler itself protected from incidental impact
• A generator that passes inspection instead of failing it
• Professional ground support standards on shared equipment
• Charging capacity available every hour of the application window

For a crew whose flying pace is set by how fast batteries come back, the generator is not a background machine. It is the thing everyone stands next to.

---

⚙️ Functional Purpose

The D14000iE ZONGSHEN Muffler Outer Cover (Upgraded) is designed to do one job completely: contain the heat coming off the exhaust and keep it away from the people and the components that surround it. It is judged on whether it is still mounted, still shaped, and still sitting tight at the end of the season.

The component helps:

• Enclose the muffler as the generator's outer exhaust heat shield
• Contain radiated heat within the exhaust area of the machine
• Guard crew and bystanders against contact with the hottest surface on the unit
• Keep radiated heat off nearby wiring and harness runs
• Keep radiated heat off nearby hoses and lines
• Reduce the chance of heat damage to components sharing the exhaust bay
• Hold its position on the mounting points through continuous vibration
• Resist heat cycling from cold start through sustained charging load
• Take incidental impact that would otherwise reach the muffler body
• Stay quiet instead of rattling against its own mounts
• Present the OEM shield contour the generator bay was designed around
• Replace a cracked, bent, warped, corroded, or missing cover
• Restore heat shielding after impact or transport damage
• Return a generator to the published ZONGSHEN-build upgraded specification
• Keep a T100 or T70P field charging line running safely through the season

The distinction worth holding onto is that this part is protective, not functional to combustion. It does not change how the engine runs, which is precisely why a damaged one can stay on a machine for a full season without anyone noticing. Nothing in the generator reports a compromised heat shield. The evidence is visual and physical — a crack, a rattle, a shield that has moved — and it only gets found by somebody who looks.

A failing or missing muffler outer cover may contribute to:

• Exposed hot exhaust surfaces on a machine people work around
• Contact burn risk during refuelling, battery swaps, and service
• Radiated heat reaching wiring and harness runs
• Radiated heat reaching hoses and lines routed nearby
• Heat-hardened, embrittled, or damaged insulation over time
• Rattle and vibration noise that masks other developing faults
• Accelerated wear at the shield's own mounting points
• Impact damage reaching the muffler that the cover would have absorbed
• A generator failed on inspection when it was otherwise ready to work

Replacing a compromised cover restores the heat shielding the exhaust area was designed around, at the cheapest point in that chain.

---

⚠️ Common Replacement Indicators

Replacement may be recommended when operators observe:

• A cracked cover or a crack starting at a mounting point
• A bent, dented, or deformed cover panel
• A warped cover that no longer follows its original contour
• Corrosion on the cover body or around the fastener locations
• A loose fit where the shield no longer sits tight to the machine
• Elongated or wallowed-out mounting holes
• Vibration, rattle, or movement where there should be none
• A cover that has to be re-tightened repeatedly to stay quiet
• Impact damage from tools, loading, or handling
• Transport damage found after hauling between job sites
• A cover that has gone missing from the machine entirely
• Exposed hot exhaust surface where the shield should be covering it
• Heat damage, discoloration, or embrittlement on nearby wiring
• Heat damage or hardening on hoses and lines routed near the exhaust
• Damage found during generator teardown, exhaust service, or scheduled inspection

Muffler outer covers fail from heat and from handling, and neither is avoidable on a charging generator that works commercial hours. Heat cycling stresses the panel and its mounting points every time the unit goes from a cold dawn start to sustained charging load and back down again. Continuous engine and exhaust vibration works at the same points from the other direction, which is how mounting holes elongate and how a shield that was tight in the spring is rattling by August — and once it is loose, the rattle accelerates its own wear. Transport contributes the rest: a generator riding a truck bed or trailer over section roads takes road shock all day, and covers get dented by tools, tailgates, and loading equipment. Corrosion finishes what heat and vibration start, particularly on machines washed down after chemical work. Whatever the route, the end state is the same — a shield that is cracked, moving, or no longer there, on the hottest area of a machine people stand beside.

For commercial operators, a replacement cover is almost always cheaper than the harness, hoses, or muffler it protects — and far cheaper than a burn.

---

📐 Specifications

DJI Material Number: YC.DZ.GR000623

Part: D14000iE Muffler Outer Cover (Upgraded)

Component Type: Generator exhaust heat shield / muffler outer cover

Engine Build: ZONGSHEN

Specification Level: Upgraded, as published on the DJI D14000iE ZONGSHEN parts breakdown

Compatibility:

• DJI Agras D14000iE Multifunctional Inverter Generator — ZONGSHEN engine build (supplier-listed fitment)
• DJI Agras T100 — supported by the D14000iE charging generator
• DJI Agras T70P — supported by the D14000iE charging generator (supplier-listed)

Package Quantity: 1 Muffler Outer Cover

Installation Area: Generator exhaust area, outer heat shield position around the muffler (supplier-listed)

Function: Contains radiated exhaust heat and guards people and nearby components against contact and heat exposure

Construction: Original DJI OEM generator exhaust heat shield

Mounting Type: Direct-fit OEM replacement cover for ZONGSHEN-build D14000iE units

Application: Agricultural drone field charging generator exhaust service and repair

Condition: Brand new — never installed, never run

Fitment Note: ZONGSHEN engine builds only. DJI dual-sourced these generator engines, and RATO-build units use different part numbers throughout the breakdown. Read the engine label on your own unit before ordering. If the label is unreadable, send a photo of the engine and the generator serial and we will identify the build for you.

---

🚜 Necessary For

This component is ideal for:

• DJI Agras T100 operators running a D14000iE charging generator
• DJI Agras T70P operators running a D14000iE charging generator
• Farmers charging spray drone batteries away from shop power
• Commercial spraying contractors working off the truck
• Custom applicators billing by the acre
• Agricultural aviation companies
• Fleet maintenance managers responsible for ground support equipment
• Agricultural drone technicians
• DJI Agras authorized service providers
• Generator and small-engine repair facilities
• Crews operating a shared generator with several people working around it
• Commercial drone fleets feeding several aircraft from one charging unit
• Precision agriculture businesses
• Operators preparing equipment for safety inspection or job-site review
• Generator refurbishment and resale preparation
• Preventative maintenance programs on high-hour ground support equipment

Especially valuable during:

• Spring spraying season
• Summer application windows
• Pre-season generator inspection and exhaust service
• Post-transport damage checks after hauling between job sites
• Hot-weather operations where the unit never fully cools between rotations
• Dry, high-stubble field conditions
• Multi-aircraft fleet operations dependent on one charging unit
• Post-season teardown, cleaning, and storage prep

A spare shield costs almost nothing to carry and keeps a cracked cover from riding out the rest of the season uncovered.

---

💡 Why This Part Matters

Every machine on a job site has one surface you are not allowed to touch, and on the D14000iE that surface is the exhaust. The muffler outer cover is the entire reason nobody has to think about it. It is a barrier, and barriers are judged by an unusual standard — they are working perfectly right up until the moment they are not there, and the cost of their absence is never paid by the barrier itself. It is paid by a harness, a hose, or a hand.

What makes this one easy to neglect is that it has no feedback. A cracked heat shield does not change the exhaust note, does not cost a charging amp, and does not throw a code. A generator with a missing cover will charge packs all day exactly like a generator with one. So the shield stays broken, and the machine keeps working, and the exposure quietly becomes normal — until a hose that has been baking all season splits, or somebody reaching for a battery finds the hot surface with a forearm. Replacing the cover the day it cracks is the whole strategy, and it is one of the least expensive strategies available on this machine.

The D14000iE Muffler Outer Cover helps maintain:

• Exhaust heat contained where the design put it
• A generator crews can work around safely all day
• Wiring and harness runs kept clear of radiated heat
• Hoses and lines protected from heat they were not specified for
• A shield that stays tight instead of wearing out its own mounts
• The muffler itself shielded from incidental impact
• Professional ground support standards on shared equipment
• Charging availability an operator can schedule around

Without a sound cover in place, operators risk:

• An exposed hot exhaust surface on a machine people reach past constantly
• Contact burns during refuelling, battery swaps, and routine service
• Heat damage accumulating on wiring, hoses, and nearby components
• A rattling shield chewing out its own mounting points
• Impact damage reaching the muffler instead of the shield
• Equipment failing a safety inspection when it was otherwise ready
• Repairs to expensive components that a cheap barrier would have prevented
• Aircraft grounded at the headland waiting on packs

For practical, hardworking operators, the value is simple:

Protect the shield. Protect the harness. Protect the crew. Protect the season.

Professional DJI Agras operators understand that ground support reliability is flight reliability, and that the equipment everyone stands next to all day deserves to be intact. Keeping an OEM D14000iE muffler outer cover in the truck means a cracked shield is a short job on a slow morning rather than an exposed exhaust for the rest of the year — and across a season of contract acres, that difference is what separates a good year from a frustrating one.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM D14000iE Zongshen Generator Muffler Outer Cover (Upgraded) (YC.DZ.GR000623)

DJI material number: YC.DZ.GR000623

Component: D14000iE Muffler Outer Cover (Upgraded)

Product category: Generator Parts

Compatible aircraft: DJI Agras T100, DJI Agras T70P

Installed position: Generator exhaust area, outer heat shield position around the muffler (supplier-listed)

Primary function: Contains radiated exhaust heat and guards people and nearby components against contact and heat exposure

Condition: Brand new — never installed, never run

Quantity supplied: 1 Muffler Outer Cover

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: YC.DZ.GR000623; DJI YC.DZ.GR000623; YC.DZ.GR000623 DJI Agras; DJI Agras T100 D14000iE Muffler Outer Cover (Upgraded); T100 D14000iE Muffler Outer Cover (Upgraded); DJI T100 d14000ie muffler outer cover (upgraded) replacement; DJI Agras D14000iE Muffler Outer Cover (Upgraded); D14000iE Muffler Outer Cover (Upgraded) OEM; D14000iE Muffler Outer Cover (Upgraded) replacement part

Definition: The D14000iE Muffler Outer Cover (Upgraded) (DJI material number YC.DZ.GR000623) is the genuine DJI OEM component fitted at Generator exhaust area on the DJI Agras T100, DJI Agras T70P, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.DZ.GR000623. Confirm the aircraft model is DJI Agras T100, DJI Agras T70P before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras T70P

DJI Agras T70P Parts

DJI T70P Parts

DJI Agras T70P OEM Parts

DJI Agras T70P replacement parts

Agras T70P parts USA

YC.DZ.GR000623

DJI YC.DZ.GR000623

YC.DZ.GR000623 replacement

DJI Agras YC.DZ.GR000623 part

DJI Agras D14000iE Muffler Outer Cover (Upgraded)

D14000iE Muffler Outer Cover (Upgraded) OEM

d14000ie muffler outer cover (upgraded) replacement

d14000ie muffler outer cover (upgraded) for sale

DJI D14000iE Muffler Outer Cover (Upgraded)

T100 D14000iE Muffler Outer Cover (Upgraded)

DJI T100 D14000iE Muffler Outer Cover (Upgraded)

DJI Agras T100 D14000iE Muffler Outer Cover (Upgraded) OEM

T70P D14000iE Muffler Outer Cover (Upgraded)

DJI T70P D14000iE Muffler Outer Cover (Upgraded)

DJI Agras T70P D14000iE Muffler Outer Cover (Upgraded) OEM

Generator Parts

DJI Agras Generator Parts

T100 Generator Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

DJI Agras T100 OEM D14000iE Zongshen Generator Muffler Outer Cover (Upgraded) (YC.DZ.GR000623) Canada

DJI Agras T100 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T100 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras D14000iE ZONGSHEN Muffler Outer Cover (Upgraded)? It is the OEM outer heat shield that encloses the exhaust on the DJI Agras D14000iE Multifunctional Inverter Generator, DJI material number YC.DZ.GR000623, in the ZONGSHEN engine build and the upgraded specification. Its function is to contain the heat radiating off the muffler and protect people and nearby components — wiring and hoses in particular — from the hottest surface on the machine.

What does it fit, and how do I know whether my generator is a ZONGSHEN or a RATO build? This part fits the ZONGSHEN engine build of the DJI Agras D14000iE Multifunctional Inverter Generator, the charging generator for the DJI Agras T100 and T70P. Read the engine label on the unit itself to identify your build. DJI dual-sourced these generator engines, so the same generator family can carry either a RATO or a ZONGSHEN engine, and RATO-build units use different part numbers throughout the breakdown. If the label is unreadable, send Ares Acres a photo of the engine and the generator serial and we will identify the build before the order goes out.

How do I tell a muffler outer cover problem from a failed exhaust muffler? By what the evidence is and where it is. The outer cover is a shield, not a gas path, so its failures are structural and visible: a crack, a bend, a warp, corrosion, elongated mounting holes, a rattle at certain engine speeds, or a shield that is simply no longer on the machine. Through all of that the exhaust note stays normal and the generator holds its charging load exactly as before. A failed muffler is a gas-path problem instead, and it announces itself differently — rust-through or holes in the muffler body, a noticeable increase in exhaust noise, exhaust escaping at a seam rather than the outlet, or a loss of power under charging load when an internal baffle has collapsed. The short version is that a cover failure is something you see and hear as a rattle; a muffler failure is something you hear as exhaust and feel as lost output. That distinction is worth making carefully, because the outer cover is the far less expensive of the two parts and it carries its own DJI material number. Do not order a muffler for what is only a broken shield, and do not fit a new shield over a muffler that has rusted through.

Why replace the cover instead of running the generator without it? Because the cover is the only thing standing between the exhaust and everything routed or working near it. Without it the generator runs perfectly well, which is the trap — nothing forces the issue while radiated heat works on wiring insulation and hoses season after season, and while a crew keeps reaching past an uncovered hot surface with batteries in both hands. The shield is one of the least expensive components in the exhaust area of the machine and one of the few whose absence costs nothing until it costs a great deal.

Is it ready to install out of the box? Yes. This is a genuine DJI OEM muffler outer cover supplied brand new — never installed, never run — built to the upgraded ZONGSHEN-build specification for the D14000iE, so it presents the OEM shield geometry the generator bay was designed around. Ares Acres uses specialized technicians to deliver the D14000iE ZONGSHEN Muffler Outer Cover (Upgraded) ordered against DJI material number YC.DZ.GR000623.

Why does a loose cover matter as much as a cracked one? Because a shield that moves damages itself and stops doing its job at the same time. Once the mounting holes elongate, the cover no longer sits tight to the machine, so it rattles under vibration, and every hour of rattling wears the mounting points further. Meanwhile the shield has shifted off the contour it was formed to follow, leaving gaps where heat gets out. Re-tightening a cover with worn mounting holes is a temporary measure at best; the fix is a shield with intact mounting geometry.

What are the signs it needs replacing? A cracked, bent, warped, or corroded cover; a loose fit or elongated mounting holes; vibration, rattle, or movement where there should be none; impact or transport damage; exposed hot exhaust surface where the shield should be; or heat damage showing up on wiring and hoses routed nearby. Damage found during generator teardown or scheduled exhaust service is the other common route to replacement.

What causes these covers to fail? Heat and handling. Heat cycling from cold start to sustained charging load and back stresses the panel and its mounting points, continuous engine and exhaust vibration elongates those mounting holes until the shield goes loose, transport over rough ground adds road shock, and tools, tailgates, and loading equipment supply the dents and impact damage. Corrosion finishes the job, particularly on machines washed down after chemical work.

Is the DJI Agras T100 OEM D14000iE Zongshen Generator Muffler Outer Cover (Upgraded) (YC.DZ.GR000623) also available in Canada? Yes. Ares Acres ships this T100 OEM D14000iE Zongshen Generator Muffler Outer Cover to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T100 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy a DJI Agras D14000iE ZONGSHEN Muffler Outer Cover (Upgraded) in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras OEM generator parts for American operators, including D14000iE ZONGSHEN Muffler Outer Cover (Upgraded) YC.DZ.GR000623 in brand new condition, with free and fast U.S. shipping plus same-day shipping and tracking on in-stock parts. Ares Acres also ships to Canada with free shipping.