DJI Agras T100 OEM Distribution Board Protective Cover (YC.JG.ZS006649)

Distribution Board Protective Cover | DJI Material Number YC.JG.ZS006649 | Power Circuitry Shield | Impact and Heat-Tolerant Board Cover | Brand New Field-Ready OEM Replacement

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

The distribution board is where the T100 and T70P's largest power flows meet their most sensitive circuitry, and the only thing standing between that board and a spray day is its cover. Dust off a dry field, chemical mist pulled back into the airframe by its own downwash, dew that forms overnight in a trailer, the wash-down at the end of the shift — none of that is unusual, and all of it is looking for a way in. A few dollars of engineered shielding is what keeps it out of the electronics the entire power system runs through.

Covers take the abuse so boards do not. They crack, they wear at the mounts, they lose their fit, and they get chalky under a season of sun — all of it doing precisely the job they were designed for. That is the economics, and it is about as lopsided as protection gets. The cover costs small-parts money and shows its condition to anybody who looks at it. The distribution board costs serious money and gives no warning at all, because board damage is not an event; it is an accumulation. A little dust across the traces, a season of chemical mist on the contacts, one wash-down that finally found the crack. A compromised cover is an open door to the most expensive kind of field damage there is — the electronic kind.

We use specialized technicians to deliver the DJI Agras Distribution Board Protective Cover ordered.

That is why Ares Acres keeps hard-to-find OEM protective hardware for the newest Agras platforms in stock and shipped fast inside the U.S.A. Covers are the parts operations discover they need at the worst possible moment: during a service where somebody finally lifts the cover off and finds it cracked through, or after a shell comes apart on a job and the cover does not go back the way it came off. On a flagship platform, waiting on a small protective part while the aircraft sits is an expensive way to learn which items belong on the shelf.

For professional farmers, aerial applicators, and commercial drone operators, this cover is board-level insurance at small-parts money.

---

✅ DJI Agras T100 / T70P Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × Original DJI Agras Distribution Board Protective Cover — DJI Material Number YC.JG.ZS006649
• Impact-resistant, heat-tolerant cover assembly
• Direct-fit OEM replacement component
• Tool-free installation and removal
• Brand new condition — never fitted
• OEM protective packaging

---

🔧 Component Overview

The DJI Agras T100 - T70P Distribution Board Protective Cover, DJI material number YC.JG.ZS006649, is the OEM shield for the distribution board of the DJI Agras T100, T70P, and related Agras models. It is the barrier between the aircraft's power distribution circuitry and everything a working agricultural environment throws at it — and on a platform where the power section is the most expensive electronics in the airframe, it is a barrier worth understanding rather than assuming.

Constructed from impact-resistant, heat-tolerant materials, the cover defends the internal power circuitry against dust, debris, moisture, and physical contact while its snug, form-fitting design maintains the airflow and thermal efficiency the board needs to run cool. Those two requirements pull against each other, which is the whole engineering problem the part solves. A cover that sealed the board completely would trade a contamination failure for a thermal one, and a cover loose enough to breathe freely would not be protecting anything. Form-fitting coverage that preserves heat dissipation is the compromise, and it is why a generic shield or a piece of tape over a crack is not a substitute — the geometry is doing work that improvisation cannot reproduce.

Tool-free installation and removal is the other design decision that matters in daily use. A protective part that requires a bench session to inspect gets inspected rarely. A cover that comes off and goes back on in the field gets checked at services, gets checked after incidents, and gets replaced the moment it looks wrong rather than at the end of a season.

The Distribution Board Protective Cover shields:

• The distribution board and its power circuitry
• Live traces and contacts against settling dust and grit
• The board surface against chemical mist and overspray
• Circuitry against moisture and wash-down water
• Electronics against impact and handling contact
• Connections against vibration-driven contamination
• The board against direct UV exposure through the season
• Power electronics during transport and field service
• The thermal path the board depends on to shed heat
• Service access to the power section without exposing it

That protection is asked for every day. Commercial agricultural drones operate in demanding environments, including:

• Crop spraying
• Liquid fertilizer application
• Spreading and seeding missions
• Humid paddy and wetland operations
• Dry, dusty field conditions
• Orchard operations
• Vineyard spraying
• Precision agriculture missions
• Daily commercial deployments
• Fleet operations
• High-acreage contract work

Throughout these operations, board covers are routinely exposed to:

• Dust and field grit accumulation
• Chemical mist and overspray
• Moisture and wash-down cycles
• Heat cycling from the board beneath
• Airframe vibration every flight
• Impact and handling contact
• UV exposure across seasons
• Transport and service handling
• Long commercial operating hours

Two of those are worth pulling out, because they are the ones that age a cover fastest and the ones operators are least likely to connect to it. The first is heat from the board underneath: the component this part protects is also one of the things wearing it out, and warped or heat-deformed sections are a recognized replacement condition rather than a cosmetic one. The second is vibration, which does its damage at the mounting points rather than in the middle of the cover. A cover cracks where it is held, and it loses its fit before it loses its shape.

Over time, this duty cracks housings, wears mounting fits, and embrittles material — and a compromised cover means contamination heading straight for the power electronics. A sound cover, by contrast, helps maintain:

• Sealed protection over the distribution board
• Dust and moisture kept off live circuitry
• Proper airflow and heat dissipation
• Impact protection during handling and flight
• Tool-free service access to the power section
• Board electronics protected across seasons
• Increased fleet readiness
• Maximum aircraft uptime
• Reliable commercial operation

For operators flying flagship electronics through dust and chemical every day, board protection is not a detail — it is the cheapest maintenance decision available on the power system.

---

⚙️ Functional Purpose

The Distribution Board Protective Cover is designed to shield the power distribution circuitry of the DJI Agras T100 and T70P against dust, moisture, impact, and environmental stress while preserving the airflow the board needs to run cool.

The component helps:

• Shield the distribution board from dust and field grit
• Block chemical mist and overspray from reaching circuitry
• Keep moisture and wash-down water off the board
• Absorb impact and physical contact during service and flight
• Maintain airflow and thermal efficiency over the board
• Withstand airframe vibration through long missions
• Protect connections from contamination working in over time
• Shield the power section from direct UV exposure
• Replace cracked, warped, or worn covers
• Install and remove tool-free for routine inspection
• Restore OEM fitment on the flagship Agras line
• Reduce board-level maintenance and cleaning needs
• Extend power system service life
• Support routine service access without exposing electronics
• Keep protective hardware field-ready across a fleet

Every amp the aircraft distributes passes under this cover — and the board lives only as clean as the cover keeps it. That is a blunt way to state it, but it is accurate: nothing else in the airframe is protecting that circuitry, and nothing downstream can undo contamination that has already settled.

An intact cover keeps the power electronics sealed and cooled through season after season of chemical duty.

A damaged or missing cover may contribute to:

• Dust and grit settling on live circuitry
• Moisture reaching the distribution board
• Chemical corrosion on contacts and traces
• Impact damage to exposed electronics
• Overheating from disrupted airflow
• Intermittent faults that are difficult to trace
• Board failures far costlier than the cover
• Interrupted spraying missions
• Unexpected downtime at operating tempo
• Reduced fleet reliability

Replacing a compromised cover restores the sealed, cooled protection the power system was engineered around — and it restores it before anything downstream has had to pay for the gap.

---

⚠️ Common Replacement Indicators

Replacement may be recommended when operators observe:

• Cracked or split cover material
• Broken mounting points or clips
• A loose or shifting fit over the board
• Warped or heat-deformed sections
• UV-embrittled, chalky material
• Impact damage from handling or contact
• Chemical-degraded or softened surfaces
• Gaps admitting dust or moisture
• Dust or residue found on the board beneath at service
• Wear at vibration contact points
• Covers missing entirely after field service
• Maintenance inspection findings
• Fleet refurbishment and preventative replacement schedules
• Long-term commercial wear across seasons

Common causes of cover wear are the ordinary conditions of the job: vibration cycling working the mounting points every flight, heat from the board beneath aging the material, UV embrittling the housing season after season, chemical exposure degrading the surfaces, and handling impacts during service. The cover is sacrificial by design — it wears so the board does not — and a cover that has given its service should be swapped before the protection gap reaches the electronics. The condition operators miss most often is loose fit rather than cracking, because a cover with worn mounts still looks intact sitting on the airframe. It is not protecting anything the way it was designed to. A cover only shields what it is held firmly against, so broken clips and a sloppy fit are their own replacement condition, entirely separate from visible damage. Check how it holds before you check how it looks.

For commercial operators, a fresh cover is almost always cheaper than the distribution board it protects.

---

📐 Specifications

DJI Material Number: YC.JG.ZS006649

Part: Distribution board protective cover / power circuitry shield

Component Type: Power system protective cover / electronics shield

Compatibility:

• DJI Agras T100
• DJI Agras T70P
• Related DJI Agras models (supplier-listed — confirm by material number)

Package Quantity: 1 Cover

Installation Area: Distribution board assembly

Function: Shields power circuitry from dust, moisture, impact, and environmental stress

Construction: Impact-resistant, heat-tolerant material

Thermal Design: Form-fitting coverage that preserves airflow and heat dissipation

Mounting Type: Tool-free installation and removal

Application: Agricultural drone power system protection

Condition: Brand new

Fitment Note: YC.JG.ZS006649 is the official DJI material number for this exact component. Match it to your parts diagram or to the label on the cover you are replacing to confirm fitment. Factory labels may carry a revision suffix — the same part in a later revision — so match the base number rather than expecting a character-for-character result, and confirm the aircraft model before ordering. Protective covers across the airframe look similar to each other; the material number is what distinguishes the distribution board cover from a visually comparable shield in a different position.

---

🚜 Necessary For

This component is ideal for:

• DJI Agras T100 operators
• DJI Agras T70P operators
• Farmers operating spray drones
• Commercial spraying contractors
• Agricultural aviation companies
• Fleet maintenance managers
• Agricultural drone technicians
• DJI Agras service providers
• Drone repair facilities
• Commercial drone fleets
• Precision agriculture businesses
• Power system service and rebuild work
• Preventative maintenance programs
• Daily commercial operations
• Emergency repair inventory
• Professional agricultural drone operators

Especially valuable during:

• Spring spraying season
• Summer application windows
• Dusty and high-chemical campaigns
• Humid and wetland operations
• Multi-aircraft fleet maintenance
• Seasonal rebuilds and pre-season inspections
• Emergency repairs
• High-hour commercial operations

When flagship electronics fly through dust and chemical every day, keeping the cover fresh keeps operations moving.

---

💡 Why This Part Matters

Electronics do not fail politely in the field. They fail from accumulation. A little dust across the traces, a season of chemical mist on the contacts, one wash-down that found a crack in the cover — board damage is almost always environmental, gradual, and preventable, and it almost never announces itself on the day the cover breaks. That is what makes this the easiest maintenance item on the aircraft to postpone and the worst one to be wrong about. There is no moment where a cracked cover produces a symptom. There is only a season later where the board does.

The cover is also one of the very few power-system items that can be assessed without opening anything up. A distribution board is not visible in normal service, cannot be inspected at a preflight, and gives no useful information until something has already gone wrong with it. The cover sits right there, in plain sight, showing exactly how well the electronics beneath it are being protected. Reading the cover is the practical read on the board, which turns a thirty-second glance at a routine check into the whole preventative program for the most expensive electronics in the airframe.

The trade is as lopsided as protection gets. The cover costs small-parts money and wears visibly; the board costs serious money and fails invisibly until it fails completely. Crews that glance at the cover during routine checks and swap it the moment it cracks, warps, or loosens are maintaining the power system at the cheapest point in the chain — and they are doing it with a part that comes off and goes back on without tools, which is precisely why the habit sticks.

The Distribution Board Protective Cover helps maintain:

• Power electronics sealed against the field
• Board cooling preserved by design rather than compromised by it
• Protection renewed at trivial cost
• The expensive failure mode prevented rather than diagnosed
• A visible, checkable indicator of power-system condition
• Professional fleet standards across aircraft
• Increased aircraft uptime
• Reliable commercial performance
• Long-term operational confidence

Flying with a compromised cover, operators risk:

• Contamination accumulating on live circuitry
• Corrosion working quietly through the season
• Thermal stress from disrupted airflow
• A board failure at full operating tempo
• Electronics repairs costing many times the cover
• Interrupted missions inside an application window
• Unexpected downtime on a flagship aircraft
• Lost spraying opportunities
• Reduced return on the fleet investment

For practical, hardworking operators, the value is simple:

Protect the cover. Protect the board. Protect the mission. Protect the season.

Professional DJI Agras operators understand that electronic reliability is built at the barrier. Keeping a fresh cover over the distribution board — and a spare under material number YC.JG.ZS006649 on the shelf — means sealed, cool, protected power all season, and across a fleet that difference is what separates a good season from a frustrating one.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM Distribution Board Protective Cover (YC.JG.ZS006649)

DJI material number: YC.JG.ZS006649

Component: Distribution board protective cover / power circuitry shield

Product category: Body Shells & Covers

Compatible aircraft: DJI Agras T100, DJI Agras T70P

Installed position: Distribution board assembly

Primary function: Shields power circuitry from dust, moisture, impact, and environmental stress

Condition: Brand new

Quantity supplied: 1 Cover

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: YC.JG.ZS006649; DJI YC.JG.ZS006649; YC.JG.ZS006649 DJI Agras; DJI Agras T100 Distribution board protective cover / power circuitry shield; T100 Distribution board protective cover / power circuitry shield; DJI T100 distribution board protective cover / power circuitry shield replacement; DJI Agras Distribution board protective cover / power circuitry shield; Distribution board protective cover / power circuitry shield OEM; Distribution board protective cover / power circuitry shield replacement part

Definition: The Distribution board protective cover / power circuitry shield (DJI material number YC.JG.ZS006649) is the genuine DJI OEM component fitted at Distribution board assembly on the DJI Agras T100, DJI Agras T70P, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.JG.ZS006649. Confirm the aircraft model is DJI Agras T100, DJI Agras T70P before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras T70P

DJI Agras T70P Parts

DJI T70P Parts

DJI Agras T70P OEM Parts

DJI Agras T70P replacement parts

Agras T70P parts USA

YC.JG.ZS006649

DJI YC.JG.ZS006649

YC.JG.ZS006649 replacement

DJI Agras YC.JG.ZS006649 part

DJI Agras Distribution board protective cover / power circuitry shield

Distribution board protective cover / power circuitry shield OEM

distribution board protective cover / power circuitry shield replacement

distribution board protective cover / power circuitry shield for sale

DJI Distribution board protective cover / power circuitry shield

T100 Distribution board protective cover / power circuitry shield

DJI T100 Distribution board protective cover / power circuitry shield

DJI Agras T100 Distribution board protective cover / power circuitry shield OEM

T70P Distribution board protective cover / power circuitry shield

DJI T70P Distribution board protective cover / power circuitry shield

DJI Agras T70P Distribution board protective cover / power circuitry shield OEM

Body Shells & Covers

DJI Agras Body Shells & Covers

T100 Body Shells & Covers

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

What is the distribution board protective cover on a DJI Agras T100? It is the OEM shield, DJI material number YC.JG.ZS006649, that sits over the distribution board and defends the power circuitry underneath from dust, debris, moisture, chemical mist, and physical contact. It is built from impact-resistant, heat-tolerant material and uses form-fitting coverage that preserves airflow and heat dissipation, so the board stays protected without being smothered. This listing supplies the cover itself in quantity one — not the distribution board it protects.

Which DJI Agras models does this cover fit, and how do I confirm the part number? Listed compatibility is the DJI Agras T100, the DJI Agras T70P, and related DJI Agras models. The official DJI material number is YC.JG.ZS006649, and matching it to your parts diagram or to the label on the cover you are replacing is the reliable way to confirm fitment. Factory labels may carry a revision suffix, which indicates a later revision of the same part rather than a different one, so match the base number rather than expecting a character-for-character result. Protective covers across the airframe resemble one another closely; the material number is what separates the distribution board cover from a visually similar shield in a different position.

The cover is cracked but the aircraft still flies — how do I tell whether the board underneath is already at risk? You largely cannot, and that is exactly why the cover is replaced on condition rather than after a symptom. The distribution board is not visible in normal service and gives no usable warning; board damage is an accumulation — dust settling across traces, a season of chemical mist on the contacts, one wash-down that finds the crack — and nothing about it happens on the day the cover breaks. What you can do is read the evidence available. Pull the cover at the next service and look at the board surface beneath it: dust, grit, or chemical residue found on the board is direct proof the barrier has already been passed, and that changes the job from a cover replacement into a cover replacement plus a careful clean and inspection of the power section. Check the cover's fit as well as its appearance, since worn mounting points let contamination in while the cover still looks intact. And treat warped or heat-deformed sections as their own signal: that is heat from the board beneath showing on the part above it. Cracked with a clean board underneath is a cheap fix caught in time. Cracked with residue on the board is a warning to act on before the season adds to it.

Why replace a cracked cover now instead of at the end of the season? Because the cost of waiting is not paid by the cover. The failure this part prevents is progressive: every flight with a gap admits more dust, every spray day adds more chemical to the contacts, and every wash-down after the crack appears puts water where water does not belong. None of that reverses when the new cover goes on later. The cover costs small-parts money and takes minutes to change without tools; the distribution board costs many times that and takes the aircraft out of service to reach. Replacing on the calendar rather than after an incident is the entire strategy here, and it is cheap precisely because it is boring.

Does the cover seal the board completely? No, and it is not supposed to. Its listed thermal design is form-fitting coverage that preserves airflow and heat dissipation, because the board has to shed heat while it is being protected. Protection and cooling are one design problem on this part rather than two — a cover that sealed the board fully would trade a contamination failure for a thermal one. That is also why improvised fixes do not work: taping a crack or fitting a generic shield may keep dust out and still create a heat problem the original geometry was designed to avoid.

Is it ready to use out of the box? Yes. It ships brand new as a direct-fit OEM replacement component in OEM protective packaging, with tool-free installation and removal at the distribution board assembly. Before fitting it, take the opportunity the open access provides: check the board surface for dust, residue, or corrosion left by the old cover's service life. Then confirm the new cover seats evenly, that every mounting point engages positively, and that there is no gap at the edges — a cover that does not hold firmly is not protecting the board regardless of how new it is.

What are the signs a board cover needs replacing? Cracked or split material, broken mounting points or clips, a loose or shifting fit over the board, warped or heat-deformed sections, UV-embrittled chalky material, chemical-degraded surfaces, wear at vibration contact points, any gap admitting dust or moisture, and dust or residue found on the board itself at service. A cover does not have to be broken to have stopped sealing, which is why fit is checked alongside appearance.

Why do these covers wear out? Vibration cycling works the mounting points every flight, heat from the board beneath ages the material, UV embrittles the housing across seasons of outdoor operation, chemical exposure degrades the surfaces, and service handling adds impacts and stress. The cover is doing its job the entire time it is being consumed, which is why it is treated as a replaceable item rather than a permanent one — and why the component it protects is, unavoidably, also one of the things wearing it out.

Where can I buy a DJI Agras T100 distribution board protective cover in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras OEM protective and power-system hardware for American operators, including this cover under DJI material number YC.JG.ZS006649 in brand new condition. Free and fast shipping is included for all U.S. customers, with same-day shipping and tracking on in-stock parts.