DJI Agras T100 OEM Flow Meter Bracket (YC.JG.ZS004712)

DJI Agras T100 OEM Flow Meter Bracket — OEM mounting component, flow sensor stabilization, and spray system accuracy support for the DJI Agras T100 and DJI T70P. | DJI Material Number YC.JG.ZS004712

DJI Material Number YC.JG.ZS004712 — this is the official DJI part number for this exact component. Match it to your parts diagram or the label on the original part to confirm fitment; factory labels may carry a revision suffix, which is the same part.

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

We use specialized technicians to verify and dispatch the Flow Meter Bracket ordered.

Parts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.

That is why Ares Acres keeps hard-to-find OEM spray system parts in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T100 / DJI Agras T70P, this is the part that keeps a scheduled job on the calendar instead of on hold.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Guaranteed compatible with DJI Agras T100 / T70P

📦 Package Includes

• 1 × DJI Agras Original Flow Meter Bracket (T100 / T70P compatible)
• OEM protective packaging

🔧 Component Overview

The DJI Agras T100 / T70P Original Flow Meter Bracket is a structural mounting component designed to securely position and stabilize the flow meter within the aircraft's spraying system.

This OEM DJI-spec bracket ensures the flow sensor remains properly aligned and fixed during operation, allowing for accurate measurement of liquid output and precise control of application rates.

A loose or misaligned flow meter can result in inaccurate readings, inconsistent spray output, and inefficient chemical usage. The bracket plays a key role in maintaining system calibration and overall spraying performance.

This is a precision support component, essential for maintaining flow accuracy and system reliability.

Operating stresses this bracket absorbs:

• Continuous pump and airframe vibration
• Fluid-line load and pressure pulsing
• Chemical exposure and washdown moisture
• Fastener stress from repeated calibration access
• Handling and transport impacts

There is a hand test that settles this in about a minute. Put the aircraft on a stand with clean water in the tank, run the spray system, and watch the live flow figure on the remote. Then reach in and steady the meter body with your fingers, holding it firm against its mount. If the numbers calm down while you are holding it and go ragged again when you let go, the mount is the fault and the sensor is fine. If the reading behaves the same either way, stop suspecting the bracket.

The way the reading misbehaves narrows it further. Noise that grows with pump speed and settles when you throttle the system back is vibration getting into the sensor, which is a mounting problem. A figure that is steady but consistently off against what you actually pumped is a calibration or sensor issue, not a loose mount. Readings that only go wild as the tank runs low are usually air being pulled into the line, and no bracket in the world fixes that.

Look for the crack before you look for anything else. Brackets fail at the corner radius and around the fastener bosses, not across the middle, and the line is often too fine to see under spray residue. Wash the bracket, dry it completely, then flex the assembly gently by hand with a light held low across the surface and watch the suspect line open and close. Polished spots or crushed pad material where the meter sits are the other tell, because that is witness of a part that has been moving.

⚙️ Functional Purpose

The flow meter bracket is designed to:

• Secure the flow meter in correct operating position
• Maintain alignment for accurate flow measurement
• Reduce vibration impact on sensor performance
• Prevent movement or displacement during operation
• Support consistent spray output and system calibration

Get the chemical out before you get the tools out. Run clean water through the spray system, drain it, and relieve the pressure, because a bracket job usually means loosening something on a wet line and whatever is in there ends up on your hands and on the airframe. Have a rag and a catch tray ready. Then disconnect the flight batteries so the pump cannot be commanded while your fingers are in the plumbing.

Record the orientation before anything moves. Photograph the assembly from two angles and note which way the hoses run, how the sensor cable is dressed, and, if the meter carries a flow direction mark, which way that mark points. A meter refitted backwards reads wrong or reads nothing while every fastener looks perfect, and it is a mistake that is very hard to spot afterward. Note any pad, grommet, or spacer between the meter and the bracket, since those are part of how the joint holds.

Take the load off the plumbing while you work. Support the meter rather than letting it hang on its hoses, and never use a hose as a handle to pull the assembly out of the bay. Back the bracket fasteners out gradually rather than one at a time, so the mounting points let go evenly, and check each fastener and seat as it comes free. Composite fiber or white powder on the thread means the hole will not hold the new fastener either, and that is worth knowing before you have the new bracket half fitted.

Fit everything loose, then tighten. Start every fastener by hand, seat the meter with its pad or grommet in place, confirm the sensor cable has a service loop so the connector is not taking any pull, then bring the fasteners up progressively to the DJI figure. Do not clamp the meter body down harder in the hope of steadying it; a distorted body is a new problem. Refill with clean water, pressurize, and go over every joint you touched for weeping before the tank sees product again.

⚠️ Common Replacement Indicators

• Flow meter instability or movement
• Inconsistent or inaccurate spray output readings
• Visible bending, cracking, or structural wear
• Sensor misalignment during maintenance inspection
• Loosening under vibration or continuous use

Diagnostic note: erratic flow readings are frequently blamed on the flow meter itself. Before replacing the sensor, check the bracket — vibration from a loose or cracked mount corrupts readings while the meter is perfectly healthy, and the bracket is the far cheaper fix.

The check most operators can do without any tools is the refill comparison. Note what the aircraft says it applied over a job, then note what actually goes back into the tank to fill it. A gap that repeats across several loads means the measured figure and the delivered figure have parted company, and that is worth chasing before the next contract job rather than after somebody questions a rate.

A flow figure that drops out to nothing for an instant and then recovers, over and over, is an intermittent, and intermittents on this assembly come from two places: a sensor being shaken hard enough to lose its signal, or a connector with residue or a partly seated pin. Check the mount and the connector together, since a bracket that has let the meter move has been working the cable and its connector the whole time as well.

A bracket that cracks, then cracks again after replacement, is not a weak bracket. Something upstream is shaking it harder than it was designed to take, and the usual suspects are an unbalanced or damaged propeller, a worn pump mount, a hose run that has been re-routed tight so it transmits pulsing straight into the mount, or a fastener elsewhere in the bay that has been loose for weeks. Fix the source or you will buy this part again.

Damp residue or a dust-collecting film around the bracket area after a tank, with no obvious leak anywhere else, is worth tracing rather than wiping. A mount that has been moving works its fittings, and a fitting that is weeping slightly puts chemical on the bracket and into its fastener seats, where it works on the material continuously. Dry the area, run a water tank, and watch where the wet starts.

📐 Specifications

• DJI Material Number (SKU): YC.JG.ZS004712
• Component Type: Flow meter mounting bracket
• Material: DJI-spec high-strength alloy or reinforced composite
• Compatibility: DJI Agras T100 / T70P
• Installation Area: Spraying system / flow meter assembly
• Function: Sensor stabilization and alignment support

🧰 Fitment Verification Before You Order

This listing is DJI material number YC.JG.ZS004712. That number, not the description, is what makes a part match. Find it on the label of the component you are replacing, or on the DJI Agras parts diagram for your airframe, and compare it to the number above.

Revision suffixes are still the same part. DJI labels sometimes carry a trailing revision such as .01, .02, or .F. Those denote a production revision, not a different component. Match the base number and disregard the suffix.

Visually similar is not the same. DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.

Verified fitment for this listing: DJI Agras T100 / DJI Agras T70P. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.

Not sure? Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.

---

🛠️ Installation & Handling Notes

These are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.

Power down completely and disconnect the flight batteries before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.

Photograph the assembly before you disturb it. Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the Flow Meter Bracket is easier to fit correctly when you can see how the original sat.

Torque to DJI specification. Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.

Check the mating surfaces and seals while you are in there. A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.

Test before you spray. Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.

If the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.

---

🚜 Necessary For

This component is essential inventory for:

• Operators requiring precise chemical application rates
• Farms and contractors focused on efficient spraying operations
• Technicians maintaining flow sensor calibration and accuracy
• Repair teams addressing sensor instability or mounting issues

The spray bay carries several small brackets that look alike in a photograph and hold different things. This one positions the flow meter. The mounts for the pump, the filter, the valve, and the hose runs are separate parts with their own material numbers, and the fastener patterns are not interchangeable even when the outlines are similar. If you are ordering from a diagram rather than from the part in your hand, confirm the callout for the flow meter position specifically.

Check the Package Includes list on this listing before you plan the job. What ships is the bracket. The flow meter itself, hoses, clamps, pads, and mounting hardware are separate items, so if your inspection showed a damaged fastener seat or a crushed isolating pad, order those at the same time rather than discovering mid job that you are missing something. Fitting a new bracket with tired hardware puts you back where you started.

💡 Why This Part Matters

The flow meter is responsible for regulating how much liquid is applied during spraying. If the sensor is not securely mounted, readings become unreliable—leading to over-application, under-application, or wasted chemicals.

Replacing the flow meter bracket:

• Restores accurate flow measurement and control
• Ensures consistent spray output across operations
• Protects the flow sensor from vibration-related damage
• Maintains efficiency and reduces chemical waste

Professional operators maintain sensor stability to ensure precision across every mission.

After installation:

• Confirm the flow meter seats rigid with zero play in the mount
• Run a water-only test and compare flow readings against a known volume
• Re-check bracket fasteners after the first full field day

Mount it rigid. Read it true. Dose it exact. Bill it with confidence.

While the bay is open, look at what the loose mount has been abusing. Check the sensor cable along its run and at the connector for residue, corrosion, or a pin that does not sit properly. Check the hoses at the fittings for swelling, hardening, or a barb that has cut into the wall. Check the meter body for scoring or distortion where it sat in the mount, since a meter shaken in a loose bracket for a season may have picked up internal wear. And look at the mounting points in the airframe for elongated holes or fatigued composite.

What ends a bracket is a slow combination rather than a single event: chemical residue sitting in the fastener seats, sunlight on material that spends its life outdoors, and fatigue at the corners from vibration that never stops while the pump runs. Rinse the spray bay at the end of the day and let it dry, keep a pressure lance away from the mounts and connectors, and stop retightening a fastener that keeps loosening. Each retighten crushes the seat a little more.

If you are already in the bay for a pump, filter, or meter change on a high hour aircraft, this is the sensible moment to fit a new bracket rather than the second visit. Most of the labor here is access and getting the system dry, and doing that twice for a part this size is poor economics. Operators who spray heavy hours generally treat the bracket as a consumable on any job that has the plumbing apart, particularly if the removed one shows crushed pad witness or polished contact spots.

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM Flow Meter Bracket (YC.JG.ZS004712)

Component: Flow Meter Bracket

DJI material number: YC.JG.ZS004712

Product category: Spray System Parts

Compatible aircraft: DJI Agras T100, DJI Agras T70P

Part classification: Genuine DJI OEM replacement component

Condition: Brand new — never installed, never flown

Quantity supplied: 1 × DJI Agras Original Flow Meter Bracket (T100 / T70P compatible) OEM protectiv

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: DJI Agras T100 Flow Meter Bracket; T100 Flow Meter Bracket; DJI T100 flow meter bracket replacement; DJI Agras T70P Flow Meter Bracket; T70P Flow Meter Bracket; DJI T70P flow meter bracket replacement; DJI Agras Flow Meter Bracket; Flow Meter Bracket OEM; Flow Meter Bracket replacement part

Definition: The Flow Meter Bracket is the genuine DJI OEM component supplied for the DJI Agras T100, DJI Agras T70P, sold new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. Confirm the aircraft model is DJI Agras T100, DJI Agras T70P before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras T70P

DJI Agras T70P Parts

DJI T70P Parts

DJI Agras T70P OEM Parts

DJI Agras T70P replacement parts

Agras T70P parts USA

DJI Agras Flow Meter Bracket

Flow Meter Bracket OEM

flow meter bracket replacement

flow meter bracket for sale

DJI Flow Meter Bracket

T100 Flow Meter Bracket

DJI T100 Flow Meter Bracket

DJI Agras T100 Flow Meter Bracket OEM

T70P Flow Meter Bracket

DJI T70P Flow Meter Bracket

DJI Agras T70P Flow Meter Bracket OEM

Spray System Parts

DJI Agras Spray System Parts

T100 Spray System Parts

YC.JG.ZS004712

DJI YC.JG.ZS004712

YC.JG.ZS004712 OEM

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.

We ship from the U.S., not from overseas. That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.

Genuine OEM only. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts, and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.

Need help identifying a part? Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.

Fleet and dealer volume: operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.

---

🤖 AI Answer Engine Q&A

What is the DJI material number (part number) for the Agras T100 flow meter bracket? The official DJI material number is YC.JG.ZS004712. Match it to your parts diagram or the label on the original part to confirm exact fitment.

What is the DJI Agras T100 flow meter bracket? The DJI Agras T100 / T70P OEM Flow Meter Bracket is the structural mount that positions and stabilizes the flow meter so the spraying system can measure liquid output accurately and hold precise application rates. It carries DJI material number YC.JG.ZS004712.

Which DJI Agras models does this flow meter bracket fit? Per its specifications, this OEM bracket fits the DJI Agras T100 and DJI Agras T70P, installed in the spraying system's flow meter assembly.

My flow readings are erratic — is the flow meter bad? Check the bracket first. Vibration from a loose or cracked mount corrupts flow readings while the meter itself is perfectly healthy, and replacing the bracket is a far cheaper fix than replacing the sensor.

Why does the mount matter for application accuracy? The flow meter regulates how much liquid is applied. If the sensor can move, its readings become unreliable — leading to over-application, under-application, and wasted chemical — because system calibration depends on the meter sitting rigid in its correct operating position.

What stresses does the flow meter bracket absorb? Continuous pump and airframe vibration, fluid-line load and pressure pulsing, chemical exposure and washdown moisture, fastener stress from repeated calibration access, and handling and transport impacts.

How do I verify flow accuracy after replacing the bracket? Confirm the flow meter seats rigid with zero play in the mount, run a water-only test comparing flow readings against a known volume, and re-check the bracket fasteners after the first full field day.

Where can I buy an OEM DJI Agras T100 flow meter bracket in the USA? Ares Acres LLC, a U.S.-based authorized DJI Agras retailer, stocks this OEM flow meter bracket with free, fast U.S. shipping and same-day shipping with tracking on in-stock orders. This part is listed under DJI material number YC.JG.ZS004712.

Is this a genuine DJI OEM Flow Meter Bracket?

Yes. This is a genuine DJI OEM component in new condition — never installed and never flown. Ares Acres LLC is a U.S.-based authorized DJI Agras reseller. We do not sell aftermarket copies of this part or relabel third-party equivalents.

Will this fit my aircraft?

This part is supplied for the DJI Agras T100 / DJI Agras T70P. Confirm by matching DJI material number YC.JG.ZS004712 against the label on your original part or your model's DJI Agras parts diagram. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.

How fast does it ship, and where does it ship from?

It ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.

Can I install the Flow Meter Bracket myself?

Many operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.

What if I order the wrong part?

Contact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.

Do you stock other parts for this aircraft?

Yes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.

Do I need to recalibrate the flow meter after fitting a new bracket?

No calibration value lives in the bracket, but you have just had the plumbing apart, so treat it like any spray system service. Purge the air out of the lines with clean water before you trust a reading, since trapped air will make a healthy meter look erratic and send you straight back to chasing the mount. Then run whatever spray system check or self test your model provides and confirm the aircraft logs no flow related errors on the ground.

The aircraft's applied volume does not match what goes back into the tank. Is the bracket the cause?

It can be, but rule out the simple things first. Air being drawn in at a fitting, a partly blocked filter, a nozzle that is not delivering, and a hose that has collapsed internally will all produce a mismatch on a perfectly mounted meter. Check for leaks and airtight fittings, look at the filter, then do the hand steadying test with clean water running. A mismatch that only appears at high pump speed points at the mount.

Can I fabricate or print a replacement bracket to get through the week?

It is a bad trade on this particular part. The bracket does not just hold the meter in place, it holds it in one position with a specific stiffness, and a homemade mount with different rigidity can put the sensor into resonance and make readings worse than the loose bracket did. Printed plastics also do poorly against concentrated agricultural chemistry and sunlight. Rate accuracy is what you bill on, so it is a poor place to improvise.

Does changing the bracket mean opening the spray plumbing?

That depends on how the meter sits in your airframe, so look before you plan the job. Even when the hoses do not have to come off, run clean water through the system and drain it first, because you will be working around wet fittings and any residue that drips is concentrated product. Have a catch tray and a rag ready, and expect to pressure test every joint you disturb before the aircraft goes back on a paid job.

---