DJI Agras T100 OEM Motor Cable Protective Cover (YC.JG.ZS006779)

DJI Agras T100 - T70P OEM Motor Cable Protective Cover — OEM motor cable protection housing, electrical harness shield cover, and agricultural drone wiring protection component. | DJI Material Number YC.JG.ZS006779

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Chafed motor wiring is the most frustrating fault in agricultural aviation: intermittent, hard to find, and always discovered mid-field. The cover that prevents it costs a fraction of the harness it protects and almost nothing compared to the day it saves. American operators keep them installed and keep spares on the shelf.

We use specialized technicians to verify and dispatch the Motor Cable Protective Cover ordered.

Parts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.

That is why Ares Acres keeps hard-to-find OEM cables & wiring in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T100 / DJI Agras T70P, this is the part that keeps a scheduled job on the calendar instead of on hold.

Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ Compatibility Guarantee

• Guaranteed compatible with the DJI Agras T100 and DJI Agras T70P
• Same Day Shipping
• FREE & FAST U.S. Shipping

📦 Package Includes

• 1 × DJI Agras OEM Motor Cable Protective Cover
• Integrated OEM cable protection housing
• Electrical harness shield assembly
• OEM protective packaging

🔧 Component Overview

The DJI Agras T100 / T70P OEM Motor Cable Protective Cover is a precision OEM protective housing engineered to shield and support critical motor cable routing systems during demanding agricultural flight operations.

Designed specifically for the DJI Agras T100 and DJI Agras T70P platforms, this protective cover safeguards exposed motor wiring, electrical harness connections, and cable routing assemblies responsible for delivering reliable power and communication between critical aircraft systems.

Constructed using reinforced high-durability composite materials with impact-resistant housing geometry, the cover is engineered to protect sensitive motor cable assemblies from:

• Dust exposure
• Chemical mist and fertilizer residue
• Water intrusion
• Impact during transportation
• Environmental debris
• Continuous vibration during flight
• Harsh agricultural operating conditions
• Long-duration commercial spraying operations

The motor cable protective cover plays a critical role in maintaining reliable electrical system protection and proper cable routing throughout daily agricultural operations. By shielding vulnerable wiring assemblies from environmental contamination and physical damage, the cover helps preserve aircraft reliability while reducing unnecessary wear on critical electrical components.

A damaged, cracked, missing, or compromised cable protective cover can expose motor wiring to contamination, abrasion, moisture, and impact damage that may negatively affect aircraft reliability and increase maintenance requirements.

This is an electrical-system-protection-critical OEM component essential for maintaining reliable DJI Agras agricultural operations and long-term fleet durability.

When one arm throws an intermittent motor or ESC warning, take this cover off and look under it before you order anything expensive. A jacket worn down to the shield or to bare strands does not read as a wiring fault on the controller. It reads as a motor problem, because that is the circuit the aircraft is watching. Operators regularly replace a motor or an ESC, fly two more days, and get the same message back, because the actual fault was a wire rubbing under a cracked cover the whole time.

Test the cover with your hand before you trust it. With the aircraft powered down, press it, try to rock it side to side, and try to lift each edge. A cover that moves at all is no longer doing its job, even if it looks perfect, because the whole point of it is to hold the harness still. Movement is the failure. Then take the fasteners out and look at the mounting bosses themselves, since hairline cracks start there and hide under the fastener head where nobody sees them.

The position of a wear mark tells you which problem you have. Abrasion on the outside of the harness where it crosses the cover edge means the cover is cracked, loose, or sitting proud and is now the thing doing the damage. Abrasion on the underside where the harness lies against the arm means the cable is not sitting in its channel and will chew through regardless of what cover you fit. Fixing the second one with a new cover alone just buys you a quieter month.

Pull the cover after a washdown and look for standing water underneath. A cover that is intact sheds water and dries out. A cover that is cracked, distorted, or missing a fastener lets water in and then holds it against the harness, which is worse than having no cover at all. Trapped water plus chemical residue is how a run of wiring that looks fine on the outside ends up green and brittle inside the insulation.

⚙️ Functional Purpose

The Motor Cable Protective Cover is designed to:

• Protect exposed motor cable assemblies
• Shield electrical harness routing points
• Reduce environmental contamination
• Protect against abrasion and impact damage
• Support proper cable positioning
• Reduce long-term wiring wear
• Maintain electrical system reliability
• Support preventative maintenance programs
• Improve aircraft durability during field operations

In commercial agricultural operations, compromised cable protection can result in:

• Wiring exposure
• Accelerated cable wear
• Environmental contamination
• Electrical system vulnerability
• Increased maintenance requirements
• Unexpected operational downtime
• Reduced aircraft reliability
• Higher long-term repair costs

This OEM protective cover helps maintain reliable electrical system protection across demanding agricultural environments.

Get set up before the first fastener comes out. Flight batteries out and the aircraft fully powered down, arm unfolded and supported so it is not hanging on the fold joint while you work, and good light on the area. Photograph the cover in place and then the harness underneath from two angles before you disturb the routing, because the cable has a factory path through this area and the photograph is the only reliable record of what it looked like when it worked.

Come at the fasteners evenly rather than running one all the way out and then moving to the next. Keep them in order, because fastener lengths in an arm assembly are frequently not interchangeable and a long one driven into a short boss will split the molding from the inside. If the cover is stuck, do not pry it up with a screwdriver against the arm. Work around the edge with something that will not mark the surface, and check for a fastener you have missed rather than adding force.

Cold makes a molded cover brittle. On a winter morning in an unheated shop, a cover that would flex happily at room temperature will crack instead, and it will crack at the mounting boss where you will not notice until you tighten it down. If the aircraft has come in cold, let the part warm up before you work it, and be gentler with removal than the plastic looks like it needs.

Before the new cover goes on, deal with the harness. Lay the cable back into its channel along its factory path with no tension and no crossing over itself, check the whole run for a chafe mark or a flat spot, and confirm nothing is sitting on a parting line or across an edge where the two halves come together. Then dry-fit the cover and look at the seam. If you have to press the cover down to make it meet, the cable is in the way, and closing it up anyway is exactly how the next chafe starts.

Start every fastener by hand before you tighten any of them, then bring them up in stages working across the pattern rather than around it. Molded covers crack at the bosses when one corner is pulled down hard while the opposite corner is still loose. When it is closed, the cover should sit flush with no gap at the seam and no rattle when you tap it. Spin the motor slowly by hand and listen for a rub, run a ground motor test before flying, and recheck the fasteners after the first full day of work.

⚠️ Common Replacement Indicators

• Cracked protective housing
• Impact damage
• Broken mounting points
• Visible structural deformation
• Chemical exposure deterioration
• Excessive vibration wear
• Loose or damaged cover assembly
• Exposed cable routing components
• Maintenance-related replacement requirements
• Preventative maintenance replacement schedules

Diagnostic note: when a cover goes missing or cracks, inspect the cable underneath before you replace the cover. Abrasion damage starts the moment the shield stops working, and a wire that has worn through its outer jacket will fault intermittently for weeks before it fails outright — usually reading as a motor or ESC problem on that arm. Any cover that no longer clips down firmly is not protecting anything; a loose cover lets the harness move, and movement is the whole problem. Replace it rather than taping it.

What kills a motor cable cover:

• Continuous vibration cracking the cover at its mounting points
• Chemical residue and UV embrittling the material
• Impact damage during transport and handling
• Pressure-washing directly at the cover seams
• Reinstalling a cracked cover instead of replacing it
• Pinching the harness during reassembly

An intermittent fault that belongs to one arm and moves with vibration or with arm position is the classic signature of a chafed motor cable under a failed cover. It will often be clean on the bench and appear only under power, and it usually gets blamed on the motor or the ESC first. Before you spend money on either, open this cover and inspect the wiring underneath it along its whole length.

A new buzz, rattle, or chirp that shows up in a particular throttle band and was not there last season is frequently a cover that has lost a fastener or cracked at a boss and is now resonating. It is easy to dismiss as noise. It is worth ten minutes, because a cover that is vibrating against the harness is abrading it every second the motor is turning.

Chalky, faded, or finely crazed surface texture means the material has taken enough UV and chemical exposure to change, and a cover in that condition no longer has the impact resistance it started with. It may still be holding position now, but it will shatter rather than flex the next time it takes a knock in transport or a wrench slips near it. That is the point to change it on your own schedule.

A cover that no longer sits flush, or that shows a gap at the seam or a step where it meets the arm, is either distorted, cracked, or fitted over a harness that has moved out of its channel. All three mean the same thing in practice: the seal against dust, water, and chemical mist is broken, and the cable underneath is no longer being held where the factory put it.

📐 Specifications

• DJI Material Number (SKU): YC.JG.ZS006779
• Component Type: Motor cable protective cover
• Compatibility: DJI Agras T100, DJI Agras T70P
• Application Area: Motor cable routing assembly
• Function: Electrical harness protection and cable shielding
• Construction: Reinforced OEM high-durability composite housing
• Installation Type: Direct-fit OEM protective component

Position, Handedness, and Quantity Per Aircraft: Not published in this listing, which supplies one cover. Arm and motor assemblies are not always symmetrical, and the number of these covers fitted to an airframe is not stated here. Count what is on your aircraft and match the base material number YC.JG.ZS006779 against the label or the parts diagram callout for the exact position you are replacing before you order quantity.

Material Grade, Wall Thickness, and Fastener Size: Not published here. The listing describes a reinforced OEM composite housing, and no grade, thickness, screw size, or torque figure is given for it. Do not work to a value taken from another Agras generation or from a similar looking cover. Use the DJI specification for your airframe and a calibrated driver, and match hardware to what came out.

Service Classification: Protective, on-condition part. It is replaced when it is cracked, distorted, loose, embrittled, or missing hardware, and preventively during an arm or motor rebuild when it is already off. No replacement interval in flight hours is published for it, and there is no wear indicator on the part itself beyond what you can see and feel.

🧰 Fitment Verification Before You Order

This listing is DJI material number YC.JG.ZS006779. That number, not the description, is what makes a part match. Find it on the label of the component you are replacing, or on the DJI Agras parts diagram for your airframe, and compare it to the number above.

Revision suffixes are still the same part. DJI labels sometimes carry a trailing revision such as .01, .02, or .F. Those denote a production revision, not a different component. Match the base number and disregard the suffix.

Visually similar is not the same. DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.

Verified fitment for this listing: DJI Agras T100 / DJI Agras T70P. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.

Not sure? Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.

---

🛠️ Installation & Handling Notes

These are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.

Power down completely and disconnect the flight batteries before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.

Photograph the assembly before you disturb it. Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the Motor Cable Protective Cover is easier to fit correctly when you can see how the original sat.

Torque to DJI specification. Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.

Observe ESD precautions. Ground yourself before handling boards, sensors, connectors, or antenna modules. Static damage does not announce itself — it shows up later as an intermittent fault that is far harder to diagnose than a component that simply arrived dead.

Seat every connector fully and restore the original strain relief. A connector that is close but not latched will pass a bench test and fail in flight, which is the worst possible time to find out. Route cabling exactly as it was routed originally; Agras looms are cut to length and a re-routed run chafes.

Test before you spray. Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.

If the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.

---

🚜 Necessary For

This component is essential inventory for:

• Commercial DJI Agras operators
• Agricultural drone maintenance teams
• High-hour spraying fleets
• Professional drone service technicians
• Agricultural aviation maintenance operations
• Fleet operators reducing electrical-system downtime
• Commercial spraying contractors
• Repair facilities servicing DJI Agras aircraft
• Preventative maintenance programs

This cover is easy to confuse with the other molded pieces in the same area of the arm, and they are not interchangeable even when they look close. Sort them by what is underneath: this one closes over motor cable routing, while an arm end cap closes off structure and an electronics cover closes over a board or a connector block. Once several are off the aircraft and sitting on a bench together they are much harder to tell apart, so tag each one as it comes off.

Do not confuse the cover with the clips, clamps, or ties that live under it. Those are what actually hold the cable in position; the cover shields the assembly and keeps the cable from moving out of its channel. If a clip is broken or missing, a new cover will not fix the underlying problem, and the harness will keep working its way loose in exactly the same way as before.

This listing is stated as fitting the DJI Agras T100 and the DJI Agras T70P. Covers on different Agras generations look nearly identical in a small diagram and photograph almost the same, and an operator running a mixed fleet is exactly the person who will fit a T70P part on the wrong airframe and only find out at the last fastener. Confirm the model, then confirm the base material number against the label on the piece you removed.

💡 Why This Part Matters

DJI Agras aircraft rely heavily on protected electrical routing systems during:

• Commercial spraying missions
• High-vibration flight operations
• Autonomous agricultural workflows
• Long-duration field deployment
• Continuous fleet utilization
• Daily transportation cycles

The Motor Cable Protective Cover helps maintain:

• Reliable cable protection
• Protected electrical pathways
• Reduced contamination risk
• Improved wiring longevity
• Consistent aircraft reliability
• Long-term maintenance efficiency
• Operational readiness during spraying missions

Without a properly functioning Motor Cable Protective Cover, operators risk:

• Cable abrasion and wear
• Electrical harness exposure
• Moisture intrusion
• Contamination from chemicals and debris
• Increased maintenance requirements
• Unexpected aircraft downtime
• Reduced operational reliability
• Higher repair and replacement costs

Using an OEM DJI Agras Motor Cable Protective Cover helps:

• Protect critical electrical systems
• Maintain wiring integrity
• Reduce environmental damage
• Improve aircraft durability
• Support preventative maintenance programs
• Increase long-term fleet reliability

Professional DJI Agras operators understand that protecting electrical harness systems is essential for maintaining safe, efficient, and reliable agricultural drone operations during demanding commercial deployment schedules.

After installation:

• Inspect the harness for abrasion before closing the cover
• Route the cable in its factory path with no pinch points
• Seat the cover fully and confirm it holds firmly with no rattle
• Torque any fasteners evenly — overtightening cracks molded covers
• Check for chafe marks during routine arm and motor service
• Keep spares in the field kit

Shield the harness. Stop the chafe. Protect the power. Fly it clean.

While the cover is off, deal with everything it was protecting. Run the motor cable through your fingers along its whole exposed length looking for flat spots, shine, or a jacket that has gone soft. Check the clips and ties for cracks and for one that has been overtightened into the jacket. Look at the mounting bosses on the arm as well as on the cover, and check the motor mount fasteners for one that has backed out, since a cover that keeps cracking often has a loose assembly under it doing the shaking.

The economics of this part are lopsided in your favor and most operators find that out the hard way. This is one of the least expensive things on the aircraft and it stands between grit, chemical, and vibration and a motor harness that is neither cheap nor quick to replace. When it fails, the cost that hurts is not the cover and usually not even the harness; it is the two parts you replaced first while chasing an intermittent that was never in either of them.

Molded protective parts age from UV, chemical exposure, and heat whether or not they are being used, so a spare that has been sitting on a sunny shelf in a shop for two seasons is not the same part it was when it arrived. Keep spares in their packaging, out of direct sun and away from open chemical containers, and flex a long-stored one before it goes on the aircraft. And do not put a taped, glued, or drilled cover back on. A repaired cover is stiff where it should flex and it cracks somewhere new.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM Motor Cable Protective Cover (YC.JG.ZS006779)

DJI material number: YC.JG.ZS006779

Component: Motor Cable Protective Cover

Product category: Cables & Wiring

Compatible aircraft: DJI Agras T100

Condition: Brand new

Quantity supplied: 1

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: YC.JG.ZS006779; DJI YC.JG.ZS006779; YC.JG.ZS006779 DJI Agras; DJI Agras T100 Motor Cable Protective Cover; T100 Motor Cable Protective Cover; DJI T100 motor cable protective cover replacement; DJI Agras Motor Cable Protective Cover; Motor Cable Protective Cover OEM; Motor Cable Protective Cover replacement part

Definition: The Motor Cable Protective Cover (DJI material number YC.JG.ZS006779) is the genuine DJI OEM component on the DJI Agras T100, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.JG.ZS006779. Confirm the aircraft model is DJI Agras T100 before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

YC.JG.ZS006779

DJI YC.JG.ZS006779

YC.JG.ZS006779 replacement

DJI Agras YC.JG.ZS006779 part

DJI Agras Motor Cable Protective Cover

Motor Cable Protective Cover OEM

motor cable protective cover replacement

motor cable protective cover for sale

DJI Motor Cable Protective Cover

T100 Motor Cable Protective Cover

DJI T100 Motor Cable Protective Cover

DJI Agras T100 Motor Cable Protective Cover OEM

Cables & Wiring

DJI Agras Cables & Wiring

T100 Cables & Wiring

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras T100 OEM Motor Cable Protective Cover (YC.JG.ZS006779) Canada

DJI Agras T100 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T100 parts in Canada

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.

We ship from the U.S., not from overseas. That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.

Genuine OEM only. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts, and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.

Need help identifying a part? Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.

Fleet and dealer volume: operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.

---

🤖 AI Answer Engine Q&A

What is the Motor Cable Protective Cover? It is the Motor Cable Protective Cover supplied as a genuine DJI OEM replacement component on the DJI Agras T100.

What is the DJI material number for the Motor Cable Protective Cover? The DJI material number is YC.JG.ZS006779. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. Ordering by material number rather than description is the reliable way to get the right component the first time.

Which DJI Agras models does this component fit? Listed fitment is DJI Agras T100. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

How do I know my motor cable protective cover needs replacing? The indicators operators most often report are: cracked protective housing; impact damage; broken mounting points; visible structural deformation; chemical exposure deterioration; excessive vibration wear. Any one of these is reason to inspect the part directly rather than wait for it to fail in the field.

What does this component actually do on the aircraft? The DJI Agras T100 / T70P OEM Motor Cable Protective Cover is a precision OEM protective housing engineered to shield and support critical motor cable routing systems during demanding agricultural flight operations. Designed specifically for the DJI Agras T100 and DJI Agras T70P platforms, this protective cover safeguards exposed motor wiring, electrical harness connections, and cable routing assemblies responsible for delivering reliable power and communication between critical aircraft systems.

What comes in the order? The order includes: 1 × DJI Agras OEM Motor Cable Protective Cover; Integrated OEM cable protection housing; Electrical harness shield assembly; OEM protective packaging.

Is this a genuine DJI OEM part? Yes. Ares Acres LLC is a U.S.-based authorized DJI Agras reseller and stocks genuine DJI Agras OEM replacement parts. This component is supplied brand new.

Why order the OEM part instead of a generic substitute? DJI Agras parts are specified to work as a system. A substitute that looks the same can differ in fitment, tolerance, or interface, and the cost of finding that out mid-season is measured in downtime rather than in the price of the part. Ordering to the DJI specification keeps the repair predictable.

Can one broken cover really cause a motor fault?

Not directly, but it is a very common root cause of one. The cover holds the motor cable still and shields it. When it cracks or comes loose, the harness starts moving against the arm and against the cover edge, and vibration wears through the jacket. What the aircraft reports is trouble on that motor circuit, because that is what it can see. Pull the cover and inspect the wiring before you buy a motor or an ESC on the strength of the error code.

Can I fly without the cover until the replacement arrives?

You can get the aircraft off the ground, and you are running a stopwatch on the harness underneath. Unprotected motor wiring in an arm takes vibration, spray, dust, and washdown water directly, and abrasion begins the first flight, not the tenth. If you genuinely have no choice, at minimum confirm the cable is in its channel and properly clipped, inspect it before and after every flight, and keep the run short.

Can I tape or glue a cracked cover?

As a get-home fix on a job you cannot walk away from, it will hold. As a repair, it does not work. Tape traps chemical and moisture against the harness instead of shedding them, adhesive stiffens the part exactly where it needs to flex, and a glued cover fails again next to the repair rather than at the original crack. The part is inexpensive enough that a shelf spare is cheaper than the diagnosis time a patched one eventually costs you.

How many do I need for the whole aircraft?

This listing supplies one cover, and the number fitted to an airframe is not stated here. Count them on your own aircraft rather than assuming, and check whether the positions use identical parts before ordering a set. If you are ordering more than one, match the base material number to the label at each position you intend to replace, and ask us first if any of the positions look different from the others.

The new cover will not sit flush. What is wrong?

Almost always the harness, not the cover. Take it back off and check that the cable is fully seated in its channel, is not doubled back or crossing itself, and is not lying across the parting line where the cover edge lands. Then check that no fastener has been started crooked and that you have the right fastener in each hole. Do not pull it down with the screws to make it meet. That cracks the boss and puts the cover edge straight onto the cable.

Is the DJI Agras T100 OEM Motor Cable Protective Cover (YC.JG.ZS006779) also available in Canada? Yes. Ares Acres ships this T100 OEM Motor Cable Protective Cover to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T100 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy the Motor Cable Protective Cover in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras OEM repair parts for American operators, with free and fast U.S. shipping plus same-day shipping and tracking on in-stock parts. Ares Acres also ships to Canada with free shipping.