DJI Agras T100 OEM Payload Lifting System Kit

T100 OEM Payload Lifting System Kit | DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192) | DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061) | DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071) | DJI Agras T100 OEM Damper Hook (YC.ST.AS000051) | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 4 component lines, 4 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The T100 OEM Payload Lifting System Kit exists because the parts inside it are the ones that strand a T100 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Configured using the T100 variants of the included products. Every component in this kit remains available separately in the Ares Acres catalog.

---

📦 Package Includes

• 1 × DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192)
• 1 × DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061)
• 1 × DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071)
• 1 × DJI Agras T100 OEM Damper Hook (YC.ST.AS000051)

---

🔧 Kit Overview

The DJI Agras T100 OEM Payload Lifting System Kit is an Ares Acres curated package that groups the components this job actually consumes into a single purchase. The lifting system is a load path with four links in it. Control module, hook, rope and damper hook are inspected as one assembly because a failure anywhere in the chain drops the load.

This product is assembled by Ares Acres from genuine DJI OEM components sold individually in our catalog. It is not represented as a factory-packaged DJI kit.

---

🔩 Component-by-Component Breakdown

1. DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192)

DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192) — DJI material number BC.AG.SS001192. It installs at the the battery lift leg assembly. Its job on the aircraft is straightforward: supporting the lift system structure through every swap and landing.

On the DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192), construction is dJI OEM electronic assembly built to factory specification for the T100 platform. Fitment covers DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list). Application: dJI Agras T100 battery lift system service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192) is responsible for a short and specific list of jobs: supports supporting the lift system structure through every swap and landing, maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, and keeps the aircraft inside its designed maintenance program. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The payload lifting control module is designed to do one job in the battery lift leg assembly and do it to specification: supporting the lift system structure through every swap and landing.

Function on the T100 is a chain: battery lift system performance depends on the battery lift leg assembly, and the battery lift leg assembly depends on every part in it holding specification. This module is one link in that chain — and chains fail at the worn link, not the average one.

That is why the platform's maintenance philosophy is inspection and renewal, not run-to-failure. The operators with the best uptime records are not the ones with the newest aircraft — they are the ones who replace parts like this when inspection says so, on their own schedule instead of the failure's.

The DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192) earns its place in this kit because of how it fails. Operators replace it when they see error messages or warnings referencing this system in the app, intermittent operation that worsens with temperature or vibration, function loss in the system this module serves, visible corrosion, moisture, or chemical residue at connectors, physical damage to the housing after an impact, erratic readings or behavior the aircraft cannot self-clear, failures that appear under load but pass on the bench, or burnt smell or discoloration at the module. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061)

DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061) — DJI material number YC.ST.AS000061. It installs at the the battery lift leg assembly. Its job on the aircraft is straightforward: supporting the lift system structure through every swap and landing.

On the DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061), construction is dJI OEM metal hardware manufactured to factory dimensions. Fitment covers DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list). Application: dJI Agras T100 battery lift system service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061) is responsible for a short and specific list of jobs: supports supporting the lift system structure through every swap and landing, maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, and keeps the aircraft inside its designed maintenance program. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The lifting hook is designed to do one job in the battery lift leg assembly and do it to specification: supporting the lift system structure through every swap and landing.

Function on the T100 is a chain: battery lift system performance depends on the battery lift leg assembly, and the battery lift leg assembly depends on every part in it holding specification. This component is one link in that chain — and chains fail at the worn link, not the average one.

The DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061) earns its place in this kit because of how it fails. Operators replace it when they see visible cracking, deformation, or impact damage, stress-whitening at load points, loose fit where the part should seat firmly, movement or rattle the design does not allow, wear marks from parts contacting where they should not, fastener holes elongated or damaged, chemical or UV degradation of the material, or damage found during teardown of the assembly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071)

DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071) — DJI material number YC.ST.AS000071. It installs at the the battery lift leg assembly. Its job on the aircraft is straightforward: supporting the lift system structure through every swap and landing.

On the DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071), construction is dJI OEM metal hardware manufactured to factory dimensions. Fitment covers DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list). Application: dJI Agras T100 battery lift system service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071) is responsible for a short and specific list of jobs: supports supporting the lift system structure through every swap and landing, maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, and keeps the aircraft inside its designed maintenance program. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The lifting rope is designed to do one job in the battery lift leg assembly and do it to specification: supporting the lift system structure through every swap and landing.

The DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071) earns its place in this kit because of how it fails. Operators replace it when they see visible cracking, deformation, or impact damage, stress-whitening at load points, loose fit where the part should seat firmly, movement or rattle the design does not allow, wear marks from parts contacting where they should not, fastener holes elongated or damaged, chemical or UV degradation of the material, or damage found during teardown of the assembly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

4. DJI Agras T100 OEM Damper Hook (YC.ST.AS000051)

DJI Agras T100 OEM Damper Hook (YC.ST.AS000051) — DJI material number YC.ST.AS000051. It installs at the the battery lift leg assembly. Its job on the aircraft is straightforward: supporting the lift system structure through every swap and landing.

On the DJI Agras T100 OEM Damper Hook (YC.ST.AS000051), construction is dJI OEM metal hardware manufactured to factory dimensions. Fitment covers DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list). Application: dJI Agras T100 battery lift system service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Damper Hook (YC.ST.AS000051) is responsible for a short and specific list of jobs: supports supporting the lift system structure through every swap and landing, maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, and keeps the aircraft inside its designed maintenance program. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The damper hook is designed to do one job in the battery lift leg assembly and do it to specification: supporting the lift system structure through every swap and landing.

The DJI Agras T100 OEM Damper Hook (YC.ST.AS000051) earns its place in this kit because of how it fails. Operators replace it when they see visible cracking, deformation, or impact damage, stress-whitening at load points, loose fit where the part should seat firmly, movement or rattle the design does not allow, wear marks from parts contacting where they should not, fastener holes elongated or damaged, chemical or UV degradation of the material, or damage found during teardown of the assembly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The T100 OEM Payload Lifting System Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192) — Supporting the lift system structure through every swap and landing
• DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061) — Supporting the lift system structure through every swap and landing
• DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071) — Supporting the lift system structure through every swap and landing
• DJI Agras T100 OEM Damper Hook (YC.ST.AS000051) — Supporting the lift system structure through every swap and landing

Inspect the complete load path before every lifting operation. Retire rope showing abrasion, glazing or deformation rather than continuing to use it.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• Error messages or warnings referencing this system in the app
• Intermittent operation that worsens with temperature or vibration
• Function loss in the system this module serves
• Visible corrosion, moisture, or chemical residue at connectors
• Physical damage to the housing after an impact
• Erratic readings or behavior the aircraft cannot self-clear
• Failures that appear under load but pass on the bench
• Burnt smell or discoloration at the module
• Repeated faults after connector reseating
• Function dropouts during arm fold or unfold
• Behavior that started after a hard landing or transport
• Age and hours — electronics in this environment are not lifetime parts
• Visible cracking, deformation, or impact damage
• Stress-whitening at load points
• Loose fit where the part should seat firmly
• Movement or rattle the design does not allow
• Wear marks from parts contacting where they should not
• Fastener holes elongated or damaged
• Chemical or UV degradation of the material
• Damage found during teardown of the assembly
• Misalignment of the components this part positions
• Noise or vibration traced to this position
• Damage after a hard landing or transport strike
• Previous field repair with tape, glue, or improvisation

Any one of these on a T100 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the T100 OEM Payload Lifting System Kit on a T100; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192). Work at the the battery lift leg assembly. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it supporting the lift system structure through every swap and landing as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061). Work at the the battery lift leg assembly. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it supporting the lift system structure through every swap and landing as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071). Work at the the battery lift leg assembly. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it supporting the lift system structure through every swap and landing as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 4 — DJI Agras T100 OEM Damper Hook (YC.ST.AS000051). Work at the the battery lift leg assembly. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it supporting the lift system structure through every swap and landing as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the T100 OEM Payload Lifting System Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 4

Aircraft coverage: DJI Agras T100

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192)
DJI Material Number: BC.AG.SS001192
Installation Area: The battery lift leg assembly
Function: Supporting the lift system structure through every swap and landing
Construction: DJI OEM electronic assembly built to factory specification for the T100 platform
Compatibility: DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list)

DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061)
DJI Material Number: YC.ST.AS000061
Installation Area: The battery lift leg assembly
Function: Supporting the lift system structure through every swap and landing
Construction: DJI OEM metal hardware manufactured to factory dimensions
Compatibility: DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list)

DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071)
DJI Material Number: YC.ST.AS000071
Installation Area: The battery lift leg assembly
Function: Supporting the lift system structure through every swap and landing
Construction: DJI OEM metal hardware manufactured to factory dimensions
Compatibility: DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list)

DJI Agras T100 OEM Damper Hook (YC.ST.AS000051)
DJI Material Number: YC.ST.AS000051
Installation Area: The battery lift leg assembly
Function: Supporting the lift system structure through every swap and landing
Construction: DJI OEM metal hardware manufactured to factory dimensions
Compatibility: DJI Agras T100, Position: the battery lift leg assembly, Diagram sheet: Leg Assembly 1 (official T100 parts list)

---

🚜 Necessary For

• Setting up payload lifting operations
• Worn or damaged lifting rope
• Hook or damper replacement
• Scheduled load-path inspection

The T100 OEM Payload Lifting System Kit suits operators running DJI Agras T100 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

A load path is only as sound as its weakest link, and the parts are inspected together for that reason. Holding the complete set means a worn rope or a deformed hook is replaced the day it is found rather than the week it arrives.

Bought separately, these 4 lines are 4 chances to order the wrong variant, 4 shipments to wait on, and 4 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

Ares Acres builds DJI Agras parts solutions around real maintenance jobs, so operators spend less time searching for the part they did not know they needed. Free and fast U.S. shipping, same-day dispatch on in-stock kits, from Albuquerque, New Mexico.

---

🧩 What This Kit Does Not Include

A kit is defined as much by its edges as by its contents. The T100 OEM Payload Lifting System Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T100 parts we stock separately — listed here so the second order does not become a second week of downtime:

• DJI Agras T100 OEM Left Control Stick Module
• DJI Agras T100 OEM Payload Control Board (BC.AG.SS001068) — BC.AG.SS001068
• DJI Agras T100 OEM Payload Peripheral Module
• DJI Agras T100 OEM Right Control Stick Module

None of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras T100 OEM Payload Lifting System Kit

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Compatible aircraft: DJI Agras T100

Component count: 4

Contains: DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192); material number BC.AG.SS001192; installed at The battery lift leg assembly

Contains: DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061); material number YC.ST.AS000061; installed at The battery lift leg assembly

Contains: DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071); material number YC.ST.AS000071; installed at The battery lift leg assembly

Contains: DJI Agras T100 OEM Damper Hook (YC.ST.AS000051); material number YC.ST.AS000051; installed at The battery lift leg assembly

Material numbers in this kit: BC.AG.SS001192; YC.ST.AS000061; YC.ST.AS000071; YC.ST.AS000051

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 repair kit

Agras T100 parts USA

T100 OEM Payload Lifting System Kit

DJI Agras T100 OEM Payload Lifting System Kit

T100 OEM Payload Lifting System Kit OEM

T100 OEM Payload Lifting System Kit for sale

DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192)

BC.AG.SS001192

DJI BC.AG.SS001192

DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061)

YC.ST.AS000061

DJI YC.ST.AS000061

DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071)

YC.ST.AS000071

DJI YC.ST.AS000071

DJI Agras T100 OEM Damper Hook (YC.ST.AS000051)

YC.ST.AS000051

DJI YC.ST.AS000051

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Are the individual parts still available?
Yes. Every component remains listed separately and always will be.

Is this an official DJI boxed kit?
No. It is an Ares Acres curated kit built from genuine OEM components, packed and shipped by us.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 4 component lines.

What is the DJI part number for the DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192) in this kit? BC.AG.SS001192. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Payload Lifting Control Module? It is the OEM payload lifting control module serving the battery lift leg assembly of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Payload Lifting Control Module? The DJI material number is BC.AG.SS001192, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Payload Lifting Control Module (BC.AG.SS001192) go and what does it do? It installs at the the battery lift leg assembly, where it supporting the lift system structure through every swap and landing.

What is the DJI part number for the DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061) in this kit? YC.ST.AS000061. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Lifting Hook? It is the OEM lifting hook serving the battery lift leg assembly of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Lifting Hook? The DJI material number is YC.ST.AS000061, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Lifting Hook (YC.ST.AS000061) go and what does it do? It installs at the the battery lift leg assembly, where it supporting the lift system structure through every swap and landing.

What is the DJI part number for the DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071) in this kit? YC.ST.AS000071. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Lifting Rope? It is the OEM lifting rope serving the battery lift leg assembly of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Lifting Rope? The DJI material number is YC.ST.AS000071, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Lifting Rope (YC.ST.AS000071) go and what does it do? It installs at the the battery lift leg assembly, where it supporting the lift system structure through every swap and landing.

What is the DJI part number for the DJI Agras T100 OEM Damper Hook (YC.ST.AS000051) in this kit? YC.ST.AS000051. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Damper Hook? It is the OEM damper hook serving the battery lift leg assembly of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Damper Hook? The DJI material number is YC.ST.AS000051, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Damper Hook (YC.ST.AS000051) go and what does it do? It installs at the the battery lift leg assembly, where it supporting the lift system structure through every swap and landing.

Which aircraft does this kit cover? DJI Agras T100. Confirm the component variant against your aircraft's parts diagram before installation.

---