DJI Agras T100 OEM Remote Controller Shell Replacement Kit

T100 OEM Remote Controller Shell Replacement Kit | DJI Agras T100 OEM Remote Upper Shell with Screen | DJI Agras T100 OEM Remote Controller Rear Shell | DJI Agras T100 OEM USB-A Port Board | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 3 component lines, 3 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The T100 OEM Remote Controller Shell Replacement Kit exists because the parts inside it are the ones that strand a T100 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Configured using the T100 variants of the included products. Every component in this kit remains available separately in the Ares Acres catalog.

---

📦 Package Includes

• 1 × DJI Agras T100 OEM Remote Upper Shell with Screen
• 1 × DJI Agras T100 OEM Remote Controller Rear Shell
• 1 × DJI Agras T100 OEM USB-A Port Board

---

🔧 Kit Overview

The DJI Agras T100 OEM Remote Controller Shell Replacement Kit is an Ares Acres curated repair package that groups the components this job actually consumes into a single purchase. A dropped controller usually breaks the screen and the case together. Upper shell with screen, rear shell and the USB port board rebuild the housing in one job rather than three orders.

This product is assembled by Ares Acres from genuine DJI OEM components sold individually in our catalog. It is not represented as a factory-packaged DJI kit.

---

🔩 Component-by-Component Breakdown

1. DJI Agras T100 OEM Remote Upper Shell with Screen

DJI Agras T100 OEM Remote Upper Shell with Screen is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.

Functionally, the DJI Agras T100 OEM Remote Upper Shell with Screen is responsible for a short and specific list of jobs: protect the controller's internal electronics and display assembly, provide a stable mounting structure for the integrated screen, maintain clear visibility and usability of the display interface, shield components from dust, moisture, and environmental exposure, support reliable touch and visual interaction during operations, and preserve structural integrity of the remote controller housing. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Set up before you open anything. Work on a clean, lint-free surface with good light, because the moment the housing is apart, any dust that lands on the inside of the glass or the face of the panel is sealed in for the life of the repair. Power the unit fully down and isolate the internal battery first if your controller's layout allows it, so no board connector is being unplugged live. Lay out a tray and map every fastener to where it came from, since housing screws differ in length and a long one driven into a short boss cracks the shell or reaches something it should not.

Part the seam with a plastic tool only, working around the joint rather than levering in one place, and never use the screen as the thing you pry against. Inside, the display and the touch layer normally land on separate flat ribbon connectors: lift the retaining flap on each socket and let the ribbon come out on its own instead of pulling it, because a torn ribbon or a broken socket latch turns a shell replacement into a mainboard replacement. Note where any antenna coax runs before you move it.

Test before you close it up, not after. Reconnect the assembly, power on, and check the full picture, the brightness at high setting, and touch response over the entire surface including the four corners and the outer edges, plus every hard button. Only then fit the gasket carefully into its channel, confirm it is not rolled or pinched anywhere along the seam, and bring the fasteners up lightly and evenly in a cross pattern. Overtightening into plastic bosses strips them and can press the housing into the panel, which shows up later as a bright or discolored patch on the display.

The DJI Agras T100 OEM Remote Upper Shell with Screen earns its place in this kit because of how it fails. Operators replace it when they see cracked, scratched, or non-functional display, reduced screen visibility or touch responsiveness, structural damage to the controller housing, exposure of internal electronics due to shell damage, moisture or debris ingress into controller assembly, damage caused by drops, impact, or field use, dead spots, ghost touches, or flickering on the panel, or a single drop onto a hard surface, screen-first. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras T100 OEM Remote Controller Rear Shell

DJI Agras T100 OEM Remote Controller Rear Shell. Remote controller rear shell / structural housing. It installs at the rear remote controller housing. Its job on the aircraft is straightforward: protects internal controller electronics and provides structural support.

On the DJI Agras T100 OEM Remote Controller Rear Shell, construction is dJI OEM molded structural housing; it mounts as direct-fit OEM replacement component; this line supplies 1 Piece. Fitment covers DJI Agras T60, DJI Agras T70, DJI Agras T70P, DJI Agras T100. Application: dJI Agras Smart Remote Controller. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Remote Controller Rear Shell is responsible for a short and specific list of jobs: protect internal electronics, restore controller housing, support internal components, maintain structural rigidity, improve impact resistance, protect internal wiring, support cooling airflow, preserve OEM fitment, maintain proper assembly alignment, and improve long-term durability. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

A fresh one instead maintains controller durability and structural integrity, internal electronics protection, reliable cooling, improved impact resistance, long-term reliability, professional appearance, reduced maintenance costs, fleet readiness, and extended controller life.

Reliable controller performance begins with dependable structural protection. A damaged rear shell contributes to housing cracks, loose internal components, dust intrusion, moisture exposure, structural weakness, increased maintenance, unexpected downtime, higher repair costs, and reduced fleet readiness.

Make a screw map before the first fastener comes out. Fastener lengths across a controller housing are not all the same, and a long screw driven into a short boss splits it. Punch the screw pattern into a piece of card, or print the photograph you took and push each screw through the paper where it belongs, so every one goes back into the hole it came out of. Work on a clean mat with the controller supported, and take the shots of the outside now while everything is still where the factory put it.

Open the halves like a book, never straight up. Release the perimeter clips with a plastic spudger worked slowly around the edge rather than a screwdriver or a knife, both of which mark the mating face and leave a burr that stops the new shell closing. When the perimeter is free the two halves are usually still joined by short ribbons or antenna leads, so hinge the shell open along one edge, get eyes on what is still attached, and only then decide what to disconnect and in what order.

The DJI Agras T100 OEM Remote Controller Rear Shell earns its place in this kit because of how it fails. Operators replace it when they see cracked rear housing, broken mounting tabs or screw mounts, impact damage, structural fractures, missing housing sections, warped shell, water damage, or chemical exposure. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras T100 OEM USB-A Port Board

DJI Agras T100 OEM USB-A Port Board is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.

Functionally, the DJI Agras T100 OEM USB-A Port Board is responsible for a short and specific list of jobs: direct wired service and diagnostic access, stable data transfer during maintenance and configuration, reliable physical interface redundancy when wireless access is unavailable, and secure connection point within the avionics housing. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The reason a dead service port is worse than its price suggests is that it is the tool you use to diagnose everything else. Wireless access covers most day-to-day operation, but when a firmware update goes sideways, when a module refuses to be recognized, or when logs need to come off the aircraft, a wired session is the fallback that does not depend on the thing you are trying to fix working correctly. Losing it means the next real problem gets diagnosed by guesswork and part swapping.

This board is also a sealing surface, not just an electrical one. The receptacle passes through the housing at a point that is otherwise closed, so the board's alignment with its cutout and the condition of the compartment gasket around it are part of the aircraft's ingress protection. A board fitted slightly proud or cocked in its mounting holds the cover off its gasket line, and the moisture that then reaches the port is what corrodes the next board you install.

The DJI Agras T100 / T70P Original USB-A Port Board is the factory interface board responsible for physical USB-A connectivity within the aircraft's avionics system. This port is used for service access, diagnostics, firmware interaction, and supported peripheral connections during maintenance and configuration workflows.

The DJI Agras T100 OEM USB-A Port Board earns its place in this kit because of how it fails. Operators replace it when they see intermittent USB connection, port looseness or internal board damage, inability to establish stable service communication, or physical corrosion or connector wear. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The T100 OEM Remote Controller Shell Replacement Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras T100 OEM Remote Upper Shell with Screen — supplied for the application named in the kit title
• DJI Agras T100 OEM Remote Controller Rear Shell — Protects internal controller electronics and provides structural support
• DJI Agras T100 OEM USB-A Port Board — supplied for the application named in the kit title

Transfer internal modules carefully and confirm all ribbon connectors are fully seated before closing the shell.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• Cracked, scratched, or non-functional display
• Reduced screen visibility or touch responsiveness
• Structural damage to the controller housing
• Exposure of internal electronics due to shell damage
• Moisture or debris ingress into controller assembly
• Damage caused by drops, impact, or field use
• Dead spots, ghost touches, or flickering on the panel
• A single drop onto a hard surface, screen-first
• Grit trapped under a case or lanyard grinding the panel
• Heat cycling in a closed truck cab in mid-summer
• Moisture creeping in past a cracked seam or damaged seal
• Chemical contact softening coatings and clouding the display
• Cracked rear housing
• Broken mounting tabs or screw mounts
• Impact damage
• Structural fractures
• Missing housing sections
• Warped shell
• Water damage
• Chemical exposure
• UV deterioration
• Transportation damage
• Maintenance inspection findings
• Preventative maintenance replacement
• Long-term commercial wear
• Controller rebuild and refurbishment projects
• Intermittent USB connection
• Port looseness or internal board damage
• Inability to establish stable service communication
• Physical corrosion or connector wear

Any one of these on a T100 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the T100 OEM Remote Controller Shell Replacement Kit on a T100; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras T100 OEM Remote Upper Shell with Screen. Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras T100 OEM Remote Controller Rear Shell. Work at the rear remote controller housing. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it protects internal controller electronics and provides structural support as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras T100 OEM USB-A Port Board. Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the T100 OEM Remote Controller Shell Replacement Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 3

Aircraft coverage: DJI Agras T100

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras T100 OEM Remote Upper Shell with Screen — full published specifications for this component are on its own catalog listing; it is supplied here exactly as sold individually.

DJI Agras T100 OEM Remote Controller Rear Shell
Component Type: Remote controller rear shell / structural housing
Installation Area: Rear remote controller housing
Function: Protects internal controller electronics and provides structural support
Package Quantity: 1 Piece
Construction: DJI OEM molded structural housing
Mounting Type: Direct-fit OEM replacement component
Compatibility: DJI Agras T60, DJI Agras T70, DJI Agras T70P, DJI Agras T100

DJI Agras T100 OEM USB-A Port Board — full published specifications for this component are on its own catalog listing; it is supplied here exactly as sold individually.

---

🚜 Necessary For

• Cracked controller screen
• Damaged controller housing
• Drop or impact damage
• Refurbishing a used controller

The T100 OEM Remote Controller Shell Replacement Kit suits operators running DJI Agras T100 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

An impact that cracks the screen almost always damages the rear case and the port at the same time. Ordering the housing as a set removes the second shipping window from the middle of a repair, which during a spray season is the part that actually costs money.

Bought separately, these 3 lines are 3 chances to order the wrong variant, 3 shipments to wait on, and 3 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

Ares Acres builds DJI Agras parts solutions around real maintenance jobs, so operators spend less time searching for the part they did not know they needed. Free and fast U.S. shipping, same-day dispatch on in-stock kits, from Albuquerque, New Mexico.

---

🧩 What This Kit Does Not Include

A kit is defined as much by its edges as by its contents. The T100 OEM Remote Controller Shell Replacement Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T100 parts we stock separately — listed here so the second order does not become a second week of downtime:

• DJI Agras T100 Remote Controller Screen Protector Replacement (Quarterly Program)
• DJI Agras T100 Remote Controller Tempered Glass Screen Protector
• DJI Agras T100 Motor Upper Cover with Screws
• DJI Agras T100 OEM Front Shell Upper Cover (YC.JG.ZS006459) — YC.JG.ZS006459
• DJI Agras T100 OEM Rear Mounted Quad Nozzle Housing Spray Rod Shell
• DJI Agras T100 OEM Remote Controller (USA Version)
• DJI Agras T100 OEM Remote Controller External SDR Antenna (Pair)
• DJI Agras T100 OEM Remote Controller Strap

None of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras T100 OEM Remote Controller Shell Replacement Kit

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Compatible aircraft: DJI Agras T100

Component count: 3

Contains: DJI Agras T100 OEM Remote Upper Shell with Screen

Contains: DJI Agras T100 OEM Remote Controller Rear Shell; installed at Rear remote controller housing

Contains: DJI Agras T100 OEM USB-A Port Board

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 repair kit

Agras T100 parts USA

T100 OEM Remote Controller Shell Replacement Kit

DJI Agras T100 OEM Remote Controller Shell Replacement Kit

T100 OEM Remote Controller Shell Replacement Kit OEM

T100 OEM Remote Controller Shell Replacement Kit for sale

DJI Agras T100 OEM Remote Upper Shell with Screen

DJI Agras T100 OEM Remote Controller Rear Shell

DJI Agras T100 OEM USB-A Port Board

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Are the individual parts still available?
Yes. Every component remains listed separately and always will be.

Is this an official DJI boxed kit?
No. It is an Ares Acres curated kit built from genuine OEM components, packed and shipped by us.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 3 component lines.

What is the Remote Upper Shell with Screen? It is the Remote Upper Shell with Screen supplied as a genuine DJI OEM replacement component on the DJI Agras T100.

Which DJI Agras models does this component fit? Listed fitment is DJI Agras T100. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

What is the DJI Agras OEM Remote Controller Rear Shell? It is the OEM structural rear housing for the DJI Agras Smart Remote Controller. It encloses and protects the controller's internal electronics, antennas, battery, and cooling system while holding the boards, buttons, sticks, and display in factory alignment.

Which DJI Agras controllers does this rear shell fit? Per its specifications, it fits the remote controllers for the DJI Agras T60, T70, T70P, and T100, as an exact factory-fit OEM housing with all original mounting points, cooling channels, and internal support structures.

Where does the DJI Agras T100 OEM Remote Controller Rear Shell go and what does it do? It installs at the rear remote controller housing, where it protects internal controller electronics and provides structural support.

What is the DJI Agras T100 / T70P USB-A Port Board? It is the factory interface board that provides the physical USB-A connection inside the aircraft's avionics and service compartment — the access point technicians use for wired diagnostics, firmware work, configuration, and supported peripheral connections on the DJI Agras T100 and T70P.

What happens when the USB service port board fails? Software troubleshooting effectively stops. Diagnostics, firmware interaction, and configuration all depend on a stable physical connection, so a dead or intermittent service port blocks the diagnosis of everything else on the aircraft until the board itself is replaced — it is the repair that restores repairability.

Which aircraft does this kit cover? DJI Agras T100. Confirm the component variant against your aircraft's parts diagram before installation.

---