DJI Agras T100 OEM RTK Antenna Service Kit

T100 OEM RTK Antenna Service Kit | DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034) | DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626) | DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898) | DJI Agras T100 OEM RTK Adapter Module | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 4 component lines, 4 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The T100 OEM RTK Antenna Service Kit exists because the parts inside it are the ones that strand a T100 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Configured using the T100 variants of the included products. Every component in this kit remains available separately in the Ares Acres catalog.

---

📦 Package Includes

• 1 × DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034)
• 1 × DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626)
• 1 × DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898)
• 1 × DJI Agras T100 OEM RTK Adapter Module

---

🔧 Kit Overview

The DJI Agras T100 OEM RTK Antenna Service Kit is an Ares Acres curated repair package that groups the components this job actually consumes into a single purchase. RTK accuracy problems usually trace to the antenna path rather than the receiver: a cracked lower cover, a perished rubber ring letting water in, or a failed adapter module. This kit replaces the whole path at once.

This product is assembled by Ares Acres from genuine DJI OEM components sold individually in our catalog. It is not represented as a factory-packaged DJI kit.

---

🔩 Component-by-Component Breakdown

1. DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034)

DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034) — DJI material number BC.AG.SS001034.

Functionally, the DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034) is responsible for a short and specific list of jobs: gNSS constellations (GPS / BeiDou / Galileo / GLONASS), rTK base station corrections, and dJI's positioning data fusion system. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Set up before you unfasten anything. Work indoors or under cover on a clean bench rather than at the tailgate, because the connector on a positioning antenna is the delicate part of this job and grit is its enemy. Power the aircraft down, disconnect the flight batteries, and let it sit. Have a small parts tray ready, since the fasteners at the upper rear shell are easy to lose and not interchangeable with whatever is in the shop drawer.

Photograph the installation from several angles before it is disturbed. Record the module orientation against the airframe, which way any label or index mark faces, the cable route and every clip along it, and the fastener positions and lengths. This part requires factory alignment at the upper rear shell, so orientation is not a matter of what looks right, and a photograph is the only reference that does not fade between removal and refit.

Handle the module as the static sensitive electronic assembly it is. Hold it by its housing rather than by the connector, do not touch the contacts, and do not set it face down on a bench where the face can pick up a scratch or a burr. Ground yourself before you handle it if you can, and leave the replacement in its sealed packaging until the old one is out and the mounting area is clean and ready.

The DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034) earns its place in this kit because of how it fails. Operators replace it when they see rTK "FLOAT" status instead of FIX, route drift or overlapping lanes, sudden RTH inaccuracies, or intermittent signal loss near trees, silos, or mild interference zones. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626)

DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626) — DJI material number YC.JG.ZS006626. It installs at the the middle and rear frame. Its job on the aircraft is straightforward: carrying the battery, payload structure, and rear electronics through every flight.

On the DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626), construction is dJI OEM molded or machined component manufactured to factory dimensions. Fitment covers DJI Agras T100 / T70P, Position: the middle and rear frame, Diagram sheet: Middle & Rear Frame (1) (official T100 parts list). Application: dJI Agras T100 airframe service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626) is responsible for a short and specific list of jobs: maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, keeps the aircraft inside its designed maintenance program, and holds up across a full season of professional duty. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The rtk lower cover is designed to do one job in the middle and rear frame and do it to specification: carrying the battery, payload structure, and rear electronics through every flight.

Function on the T100 is a chain: airframe performance depends on the middle and rear frame, and the middle and rear frame depends on every part in it holding specification. This component is one link in that chain — and chains fail at the worn link, not the average one.

That is why the platform's maintenance philosophy is inspection and renewal, not run-to-failure. The operators with the best uptime records are not the ones with the newest aircraft — they are the ones who replace parts like this when inspection says so, on their own schedule instead of the failure's.

The DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626) earns its place in this kit because of how it fails. Operators replace it when they see visible cracking, deformation, or impact damage, stress-whitening at load points, loose fit where the part should seat firmly, movement or rattle the design does not allow, wear marks from parts contacting where they should not, fastener holes elongated or damaged, chemical or UV degradation of the material, or damage found during teardown of the assembly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898)

DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898) — DJI material number YC.JG.MY001898.

Functionally, the DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898) is responsible for a short and specific list of jobs: seal the RTK module against dust and moisture, absorb vibration and reduce mechanical stress, maintain stable positioning of the RTK unit, protect sensitive GNSS electronics from environmental exposure, and support consistent high-precision positioning performance. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Get the old ring out without damaging what seals against it. Never use a screwdriver, a knife, or a steel pick to lever it from the groove. One scratch across a sealing land will leak for the rest of the aircraft life no matter how good the replacement is. Roll the old ring up out of its groove with a thumb, or lift it clear with a wooden or plastic pick, and if it has bonded itself into the groove work it loose in stages rather than tearing it out.

Clean the groove properly, then inspect it. Every trace of old compound, dried spray mix, and grit has to come out, because a single grain trapped under a ring is a leak path that will not respond to more torque. Wipe the groove and the mating face dry, run a fingernail around both looking for nicks and burrs, and check the corners of the groove where residue hides. That face has to be clean, dry, and unscored before the new ring goes anywhere near it.

Fit the ring without stretching or twisting it. Ease it over any edge rather than dragging it, keep it clear of thread and fastener corners, and once it is in the groove run a finger the whole way around. It should lie flat, sit down in the groove for its entire circumference, and show no rolled or twisted section anywhere. A twist is the single most common reason a fresh seal leaks, and it becomes invisible the moment the module is back down on top of it.

The DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898) earns its place in this kit because of how it fails. Operators replace it when they see cracking, hardening, or deformation of rubber material, loose or unstable RTK module fitment, reduced positioning accuracy or signal inconsistency, visible wear during maintenance inspection, or evidence of dust or moisture ingress near RTK housing. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

4. DJI Agras T100 OEM RTK Adapter Module

DJI Agras T100 OEM RTK Adapter Module is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.

The adapter's job is a clean, reliable connection in the RTK data path. It has to seat firmly, hold its connection through vibration and handling, and keep moisture and agricultural chemistry away from its contacts. When it works, RTK just works and nobody thinks about it. When the connection degrades — corroded contacts, a loose fit, water ingress — the symptoms look like an RTK problem rather than an adapter problem: intermittent fix, positioning that drops out mid-mission, or a system that will not establish a link at all.

Power the aircraft fully down before the module comes out or goes in. Positioning hardware is not the place to build a hot-plugging habit, and an adapter that is removed live can leave the system holding a stale state that then gets blamed on the new part. Confirm the aircraft is off, not merely idle, and give it a moment before you touch the connector. Photograph the installed module first, including which port it sits in and which way the housing faces.

Pull it straight out and push it straight in. Rocking a connector side to side to break it free is what splays contacts, and splayed contacts are the reason a replacement module sometimes feels loose in a port that used to hold well. If it resists, check that a retaining cover, cap, or boot is not still holding it before you add force. Support the airframe side with your other hand so the load goes into your fingers rather than into the port and the board behind it.

The DJI Agras T100 OEM RTK Adapter Module earns its place in this kit because of how it fails. Operators replace it when they see rTK fix that will not establish, or establishes and then drops, intermittent positioning faults that come and go with vibration or handling, corroded, discolored, or bent contacts on the connector, a module that no longer seats firmly and works loose in use, cracked or damaged housing after an impact or transport knock, or failure to link after a washdown or a wet spray day. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The T100 OEM RTK Antenna Service Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034) — supplied for the application named in the kit title
• DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626) — Carrying the battery, payload structure, and rear electronics through every flight
• DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898) — supplied for the application named in the kit title
• DJI Agras T100 OEM RTK Adapter Module — supplied for the application named in the kit title

Re-seat the antenna squarely and confirm the rubber ring is fully compressed before flight. Verify RTK fix on the ground.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• RTK "FLOAT" status instead of FIX
• Route drift or overlapping lanes
• Sudden RTH inaccuracies
• Intermittent signal loss near trees, silos, or mild interference zones
• Visible cracking, deformation, or impact damage
• Stress-whitening at load points
• Loose fit where the part should seat firmly
• Movement or rattle the design does not allow
• Wear marks from parts contacting where they should not
• Fastener holes elongated or damaged
• Chemical or UV degradation of the material
• Damage found during teardown of the assembly
• Misalignment of the components this part positions
• Noise or vibration traced to this position
• Damage after a hard landing or transport strike
• Previous field repair with tape, glue, or improvisation
• Cracking, hardening, or deformation of rubber material
• Loose or unstable RTK module fitment
• Reduced positioning accuracy or signal inconsistency
• Visible wear during maintenance inspection
• Evidence of dust or moisture ingress near RTK housing
• RTK fix that will not establish, or establishes and then drops
• Intermittent positioning faults that come and go with vibration or handling
• Corroded, discolored, or bent contacts on the connector
• A module that no longer seats firmly and works loose in use
• Cracked or damaged housing after an impact or transport knock
• Failure to link after a washdown or a wet spray day

Any one of these on a T100 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the T100 OEM RTK Antenna Service Kit on a T100; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034). Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626). Work at the the middle and rear frame. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it carrying the battery, payload structure, and rear electronics through every flight as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898). Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 4 — DJI Agras T100 OEM RTK Adapter Module. Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the T100 OEM RTK Antenna Service Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 4

Aircraft coverage: DJI Agras T100

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034)
DJI Material Number: BC.AG.SS001034

DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626)
DJI Material Number: YC.JG.ZS006626
Installation Area: The middle and rear frame
Function: Carrying the battery, payload structure, and rear electronics through every flight
Construction: DJI OEM molded or machined component manufactured to factory dimensions
Compatibility: DJI Agras T100 / T70P, Position: the middle and rear frame, Diagram sheet: Middle & Rear Frame (1) (official T100 parts list)

DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898)
DJI Material Number: YC.JG.MY001898

DJI Agras T100 OEM RTK Adapter Module — full published specifications for this component are on its own catalog listing; it is supplied here exactly as sold individually.

---

🚜 Necessary For

• Loss of RTK fix or degraded accuracy
• Water ingress at the antenna mount
• Antenna mount damage
• Season-start navigation service

The T100 OEM RTK Antenna Service Kit suits operators running DJI Agras T100 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

RTK accuracy problems usually trace to the antenna path rather than the receiver. Replacing the whole path at once removes the second shipping window from the middle of a repair, which during a spray season is the part that actually costs money.

Bought separately, these 4 lines are 4 chances to order the wrong variant, 4 shipments to wait on, and 4 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

Ares Acres builds DJI Agras parts solutions around real maintenance jobs, so operators spend less time searching for the part they did not know they needed. Free and fast U.S. shipping, same-day dispatch on in-stock kits, from Albuquerque, New Mexico.

---

🧩 What This Kit Does Not Include

A kit is defined as much by its edges as by its contents. The T100 OEM RTK Antenna Service Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T100 parts we stock separately — listed here so the second order does not become a second week of downtime:

• DJI Agras T100 OEM Dosing Part Rubber Cover (YC.JG.MY001721) — YC.JG.MY001721
• DJI Agras T100 OEM Motor Lower Cover (YC.JG.ZS006778) — YC.JG.ZS006778
• DJI Agras T100 OEM Power Distribution Board Connector Module (Lower) (BC.AG.SS001195) — BC.AG.SS001195
• DJI Agras T100 OEM Rear Lower Module

None of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras T100 OEM RTK Antenna Service Kit

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Compatible aircraft: DJI Agras T100

Component count: 4

Contains: DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034); material number BC.AG.SS001034

Contains: DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626); material number YC.JG.ZS006626; installed at The middle and rear frame

Contains: DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898); material number YC.JG.MY001898

Contains: DJI Agras T100 OEM RTK Adapter Module

Material numbers in this kit: BC.AG.SS001034; YC.JG.ZS006626; YC.JG.MY001898

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 repair kit

Agras T100 parts USA

T100 OEM RTK Antenna Service Kit

DJI Agras T100 OEM RTK Antenna Service Kit

T100 OEM RTK Antenna Service Kit OEM

T100 OEM RTK Antenna Service Kit for sale

DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034)

BC.AG.SS001034

DJI BC.AG.SS001034

DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626)

YC.JG.ZS006626

DJI YC.JG.ZS006626

DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898)

YC.JG.MY001898

DJI YC.JG.MY001898

DJI Agras T100 OEM RTK Adapter Module

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Are the individual parts still available?
Yes. Every component remains listed separately and always will be.

Is this an official DJI boxed kit?
No. It is an Ares Acres curated kit built from genuine OEM components, packed and shipped by us.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 4 component lines.

What is the DJI part number for the DJI Agras T100 OEM RTK Antenna Module (BC.AG.SS001034) in this kit? BC.AG.SS001034. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI material number (part number) for the Agras T100 RTK antenna module? The official DJI material number is BC.AG.SS001034. Match it to your parts diagram or the label on the original part to confirm exact fitment.

What is the DJI Agras RTK antenna module? It is the RTK dual-band antenna module for the DJI Agras T100 and T70P — the positioning component that enables centimeter-level flight accuracy and stable route planning, built as a shielded antenna array in a weather-resistant housing. It carries DJI material number BC.AG.SS001034.

What is the DJI part number for the DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626) in this kit? YC.JG.ZS006626. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 RTK Lower Cover? It is the OEM RTK lower cover serving the middle and rear frame of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the RTK Lower Cover? The DJI material number is YC.JG.ZS006626, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM RTK Lower Cover (YC.JG.ZS006626) go and what does it do? It installs at the the middle and rear frame, where it carrying the battery, payload structure, and rear electronics through every flight.

What is the DJI part number for the DJI Agras T100 OEM RTK Rubber Ring (YC.JG.MY001898) in this kit? YC.JG.MY001898. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI material number (part number) for the Agras T100 RTK rubber ring? The official DJI material number is YC.JG.MY001898. Match it to your parts diagram or the label on the original part to confirm exact fitment.

What is the DJI Agras T100 RTK rubber ring? The DJI Agras T100 / T70P OEM RTK Rubber Ring is a precision sealing and cushioning ring for the RTK positioning module housing, sealing out dust and moisture while damping vibration around the aircraft's GNSS hardware. It carries DJI material number YC.JG.MY001898.

What is the DJI Agras RTK adapter module? It is a compact sealed plug-in module that sits in the RTK positioning chain on the DJI Agras T25P, T60, T70, T70P, and T100 — a molded housing with a USB-style connector, supplied as one complete unit.

Which DJI Agras models does this RTK adapter fit? The supplier lists it for the DJI Agras T25P, T60, T70, T70P, and T100. All five are offered as variants on this listing.

Which aircraft does this kit cover? DJI Agras T100. Confirm the component variant against your aircraft's parts diagram before installation.

---