DJI Agras T100 OEM Seal & Gasket Service Kit

T100 OEM Seal & Gasket Service Kit | DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs) | DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775) | DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053) | DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623) | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 4 component lines, 4 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The T100 OEM Seal & Gasket Service Kit exists because the parts inside it are the ones that strand a T100 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Configured using the T100 variants of the included products. Every component in this kit remains available separately in the Ares Acres catalog.

---

📦 Package Includes

• 1 × DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs)
• 1 × DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775)
• 1 × DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053)
• 1 × DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623)

---

🔧 Kit Overview

The DJI Agras T100 OEM Seal & Gasket Service Kit is an Ares Acres curated repair package that groups the components this job actually consumes into a single purchase. Seals are the cheapest parts on the aircraft and the reason the expensive ones stay dry. They are also single-use: a compressed ring that has done a season does not seal again once disturbed.

This product is assembled by Ares Acres from genuine DJI OEM components sold individually in our catalog. It is not represented as a factory-packaged DJI kit.

---

🔩 Component-by-Component Breakdown

1. DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs)

DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs) is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.

Functionally, the DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs) is responsible for a short and specific list of jobs: maintain compartment sealing integrity, protect sensitive avionics systems, reduce moisture intrusion, limit dust contamination, support long-term electronic reliability, restore OEM environmental protection, support preventative maintenance programs, and improve operational reliability. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

A fresh one instead maintains reliable compartment sealing, protection against contamination, reduced electronic wear, long-term aircraft reliability, preventative maintenance readiness, and consistent agricultural mission performance.

Water gets the attention, but dust is what these rings hold back on most days of the year. Field dust is fine, abrasive, and slightly conductive once it takes up humidity, and it settles into exactly the places that cause trouble: the faces of connectors, the gap around a board edge, and any surface relying on airflow to shed heat. A compartment that fills gradually with dust does not fail on a particular day. It runs hotter and gets less reliable over a season in a way that is almost impossible to attribute to anything.

There is also a chemical-vapor job that does not require liquid water at all. Concentrates and tank cleaners give off vapor that will corrode exposed metal and creep along wiring inside a compartment that is not sealed, and vapor gets through gaps far too small to pass a drop. That is one reason a bay can show corrosion on connector pins with no evidence of standing water anywhere, and why seal condition matters on an aircraft that has never once been rained on.

Fresh rings also protect every future repair in that compartment. A sealed bay is designed as a closed unit: connectors are mated dry, boards sit in known conditions, and any diagnosis you do assumes those conditions hold. Once the barrier has been compromised, corrosion and contamination spread beyond the original fault, and a job that would have been one connector becomes a harness, a board, and a day of tracing intermittents. Renewing the seals is what keeps the compartment a defined space rather than an open one.

The DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs) earns its place in this kit because of how it fails. Operators replace it when they see compressed sealing material, visible cracking, seal deterioration, moisture intrusion concerns, chemical exposure damage, maintenance-related replacement, compartment servicing procedures, or preventative maintenance schedules. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775)

DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775) — DJI material number YC.JG.MY001775. It installs at the the flow meter module. Its job on the aircraft is straightforward: measuring what actually leaves the tank so the flight controller can hold your target rate.

On the DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775), construction is dJI OEM elastomer/foam component molded to factory dimensions for its exact seat. Fitment covers DJI Agras T100 / T70P, Position: the flow meter module, Diagram sheet: Flow Meter (official T100 parts list). Application: dJI Agras T100 spray system service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775) is responsible for a short and specific list of jobs: maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, keeps the aircraft inside its designed maintenance program, and holds up across a full season of professional duty. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The valve core sealing ring is designed to do one job in the flow meter module and do it to specification: measuring what actually leaves the tank so the flight controller can hold your target rate.

Function on the T100 is a chain: spray system performance depends on the flow meter module, and the flow meter module depends on every part in it holding specification. This component is one link in that chain — and chains fail at the worn link, not the average one.

That is why the platform's maintenance philosophy is inspection and renewal, not run-to-failure. The operators with the best uptime records are not the ones with the newest aircraft — they are the ones who replace parts like this when inspection says so, on their own schedule instead of the failure's.

The DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775) earns its place in this kit because of how it fails. Operators replace it when they see hardened, cracked, or glossy sealing surface, compression set — the part no longer springs back, weeping or residue tracking past the seal line, swelling or softening from chemical attack, nicks or cuts from previous disassembly, flattened, torn, or missing sections, moisture found inside the space it protects, or loss of fit — the part no longer seats snugly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053)

DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053) — DJI material number YC.JG.MY001053. It installs at the the impeller pump. Its job on the aircraft is straightforward: moving chemical from tank to sprinklers at working pressure, hour after hour.

On the DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053), construction is dJI OEM elastomer/foam component molded to factory dimensions for its exact seat. Fitment covers DJI Agras T100 / T60X / T50, Position: the impeller pump, Diagram sheet: Impeller Pump (official T100 parts list). Application: dJI Agras T100 spray system service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053) is responsible for a short and specific list of jobs: serves the impeller pump of the DJI Agras T100 exactly as the factory intends, maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, and keeps the aircraft inside its designed maintenance program. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The y-tee part sealing pad is designed to do one job in the impeller pump and do it to specification: moving chemical from tank to sprinklers at working pressure, hour after hour.

Function on the T100 is a chain: spray system performance depends on the impeller pump, and the impeller pump depends on every part in it holding specification. This component is one link in that chain — and chains fail at the worn link, not the average one.

The DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053) earns its place in this kit because of how it fails. Operators replace it when they see hardened, cracked, or glossy sealing surface, compression set — the part no longer springs back, weeping or residue tracking past the seal line, swelling or softening from chemical attack, nicks or cuts from previous disassembly, flattened, torn, or missing sections, moisture found inside the space it protects, or loss of fit — the part no longer seats snugly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

4. DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623)

DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623) — DJI material number YC.JG.MQ002623. It installs at the the front frame and sensor cluster. Its job on the aircraft is straightforward: carrying the forward sensors — radar, LiDAR, FPV, vision — through vibration and weather.

On the DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623), construction is dJI OEM elastomer/foam component molded to factory dimensions for its exact seat. Fitment covers DJI Agras T100 / T70P / T60X / T25P, Position: the front frame and sensor cluster, Diagram sheet: Front Frame (1) (official T100 parts list). Application: dJI Agras T100 airframe service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623) is responsible for a short and specific list of jobs: maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, keeps the aircraft inside its designed maintenance program, and holds up across a full season of professional duty. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The thermally conductive pad (53.1 x 12.9 mm) is designed to do one job in the front frame and sensor cluster and do it to specification: carrying the forward sensors — radar, LiDAR, FPV, vision — through vibration and weather.

Function on the T100 is a chain: airframe performance depends on the front frame and sensor cluster, and the front frame and sensor cluster depends on every part in it holding specification. This component is one link in that chain — and chains fail at the worn link, not the average one.

The DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623) earns its place in this kit because of how it fails. Operators replace it when they see hardened, cracked, or glossy sealing surface, compression set — the part no longer springs back, weeping or residue tracking past the seal line, swelling or softening from chemical attack, nicks or cuts from previous disassembly, flattened, torn, or missing sections, moisture found inside the space it protects, or loss of fit — the part no longer seats snugly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The T100 OEM Seal & Gasket Service Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs) — supplied for the application named in the kit title
• DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775) — Measuring what actually leaves the tank so the flight controller can hold your target rate
• DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053) — Moving chemical from tank to sprinklers at working pressure, hour after hour
• DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623) — Carrying the forward sensors — radar, LiDAR, FPV, vision — through vibration and weather

Replace seals rather than reusing them after disassembly. Clean sealing faces before fitting.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• Compressed sealing material
• Visible cracking
• Seal deterioration
• Moisture intrusion concerns
• Chemical exposure damage
• Maintenance-related replacement
• Compartment servicing procedures
• Preventative maintenance schedules
• Compression set from staying clamped season after season
• Chemical residue attacking the sealing material
• Pressure-washing directly at compartment seams
• UV exposure and heat cycling hardening the material
• Reusing seals after opening a compartment
• Pinching or twisting a ring during reassembly
• Hardened, cracked, or glossy sealing surface
• Compression set — the part no longer springs back
• Weeping or residue tracking past the seal line
• Swelling or softening from chemical attack
• Nicks or cuts from previous disassembly
• Flattened, torn, or missing sections
• Moisture found inside the space it protects
• Loss of fit — the part no longer seats snugly
• Perishing or crumbling at the edges
• Discoloration from UV or chemical exposure
• Water in a connector or bay after washdown
• Every teardown — seals are replace-on-open parts

Any one of these on a T100 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the T100 OEM Seal & Gasket Service Kit on a T100; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs). Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775). Work at the the flow meter module. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it measuring what actually leaves the tank so the flight controller can hold your target rate as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053). Work at the the impeller pump. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it moving chemical from tank to sprinklers at working pressure, hour after hour as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 4 — DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623). Work at the the front frame and sensor cluster. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it carrying the forward sensors — radar, LiDAR, FPV, vision — through vibration and weather as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the T100 OEM Seal & Gasket Service Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 4

Aircraft coverage: DJI Agras T100

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs) — full published specifications for this component are on its own catalog listing; it is supplied here exactly as sold individually.

DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775)
DJI Material Number: YC.JG.MY001775
Installation Area: The flow meter module
Function: Measuring what actually leaves the tank so the flight controller can hold your target rate
Construction: DJI OEM elastomer/foam component molded to factory dimensions for its exact seat
Compatibility: DJI Agras T100 / T70P, Position: the flow meter module, Diagram sheet: Flow Meter (official T100 parts list)

DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053)
DJI Material Number: YC.JG.MY001053
Installation Area: The impeller pump
Function: Moving chemical from tank to sprinklers at working pressure, hour after hour
Construction: DJI OEM elastomer/foam component molded to factory dimensions for its exact seat
Compatibility: DJI Agras T100 / T60X / T50, Position: the impeller pump, Diagram sheet: Impeller Pump (official T100 parts list)

DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623)
DJI Material Number: YC.JG.MQ002623
Installation Area: The front frame and sensor cluster
Function: Carrying the forward sensors — radar, LiDAR, FPV, vision — through vibration and weather
Construction: DJI OEM elastomer/foam component molded to factory dimensions for its exact seat
Compatibility: DJI Agras T100 / T70P / T60X / T25P, Position: the front frame and sensor cluster, Diagram sheet: Front Frame (1) (official T100 parts list)

---

🚜 Necessary For

• Any avionics bay opening
• Spray circuit servicing
• Season-start seal refresh
• Water ingress troubleshooting

The T100 OEM Seal & Gasket Service Kit suits operators running DJI Agras T100 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

Seals are single-use and are disturbed together whenever the avionics bay or spray circuit is opened. Ordering them together removes the second shipping window from the middle of a repair, which during a spray season is the part that actually costs money.

Bought separately, these 4 lines are 4 chances to order the wrong variant, 4 shipments to wait on, and 4 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

Ares Acres builds DJI Agras parts solutions around real maintenance jobs, so operators spend less time searching for the part they did not know they needed. Free and fast U.S. shipping, same-day dispatch on in-stock kits, from Albuquerque, New Mexico.

---

🧩 What This Kit Does Not Include

A kit is defined as much by its edges as by its contents. The T100 OEM Seal & Gasket Service Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T100 parts we stock separately — listed here so the second order does not become a second week of downtime:

• DJI Agras T100 – T70P Valve Core Sealing Ring (YC.JG.MY001775) — YC.JG.MY001775
• DJI Agras T100 – T60X – T50 Y-tee Part Sealing Pad (YC.JG.MY001053) — YC.JG.MY001053
• DJI Agras T100 – T70P – T55 Avionics Sealing Ring Kit (5 Pcs)
• DJI Agras T100 OEM Optical Window Sealing Ring (YC.JG.MY000651) — YC.JG.MY000651

None of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras T100 OEM Seal & Gasket Service Kit

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Compatible aircraft: DJI Agras T100

Component count: 4

Contains: DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs)

Contains: DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775); material number YC.JG.MY001775; installed at The flow meter module

Contains: DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053); material number YC.JG.MY001053; installed at The impeller pump

Contains: DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623); material number YC.JG.MQ002623; installed at The front frame and sensor cluster

Material numbers in this kit: YC.JG.MY001775; YC.JG.MY001053; YC.JG.MQ002623

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 repair kit

Agras T100 parts USA

T100 OEM Seal & Gasket Service Kit

DJI Agras T100 OEM Seal & Gasket Service Kit

T100 OEM Seal & Gasket Service Kit OEM

T100 OEM Seal & Gasket Service Kit for sale

DJI Agras T100 OEM Avionics Sealing Ring Kit (5 Pcs)

DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775)

YC.JG.MY001775

DJI YC.JG.MY001775

DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053)

YC.JG.MY001053

DJI YC.JG.MY001053

DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623)

YC.JG.MQ002623

DJI YC.JG.MQ002623

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Are the individual parts still available?
Yes. Every component remains listed separately and always will be.

Is this an official DJI boxed kit?
No. It is an Ares Acres curated kit built from genuine OEM components, packed and shipped by us.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 4 component lines.

What is the Avionics Sealing Ring Kit (5 Pcs)? It is the Avionics Sealing Ring Kit (5 Pcs) supplied as a genuine DJI OEM replacement component on the DJI Agras T100.

Which DJI Agras models does this component fit? Listed fitment is DJI Agras T100. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

What is the DJI part number for the DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775) in this kit? YC.JG.MY001775. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Valve Core Sealing Ring? It is the OEM valve core sealing ring serving the flow meter module of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Valve Core Sealing Ring? The DJI material number is YC.JG.MY001775, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Valve Core Sealing Ring (YC.JG.MY001775) go and what does it do? It installs at the the flow meter module, where it measuring what actually leaves the tank so the flight controller can hold your target rate.

What is the DJI part number for the DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053) in this kit? YC.JG.MY001053. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Y-tee Part Sealing Pad? It is the OEM Y-tee part sealing pad serving the impeller pump of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Y-tee Part Sealing Pad? The DJI material number is YC.JG.MY001053, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Y-tee Part Sealing Pad (YC.JG.MY001053) go and what does it do? It installs at the the impeller pump, where it moving chemical from tank to sprinklers at working pressure, hour after hour.

What is the DJI part number for the DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623) in this kit? YC.JG.MQ002623. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Thermally Conductive Pad (53.1 x 12.9 mm)? It is the OEM thermally conductive pad (53.1 x 12.9 mm) serving the front frame and sensor cluster of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Thermally Conductive Pad (53.1 x 12.9 mm)? The DJI material number is YC.JG.MQ002623, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Thermally Conductive Pad (53.1 x 12.9 mm) (YC.JG.MQ002623) go and what does it do? It installs at the the front frame and sensor cluster, where it carrying the forward sensors — radar, LiDAR, FPV, vision — through vibration and weather.

Which aircraft does this kit cover? DJI Agras T100. Confirm the component variant against your aircraft's parts diagram before installation.

---