DJI Agras T100 OEM Sprinkler Funnel Bracket (YC.JG.ZS006215)

DJI Agras T100 OEM Sprinkler Funnel Bracket — OEM mounting component, sprinkler alignment support, and structural stabilization for the DJI Agras T100 and DJI T70P spray system. | DJI Material Number YC.JG.ZS006215

DJI Material Number YC.JG.ZS006215 — this is the official DJI part number for this exact component. Match it to your parts diagram or the label on the original part to confirm fitment; factory labels may carry a revision suffix, which is the same part.

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

We use specialized technicians to verify and dispatch the Sprinkler Funnel Bracket ordered.

Parts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.

That is why Ares Acres keeps hard-to-find OEM spray system parts in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T100 / DJI Agras T70P, this is the part that keeps a scheduled job on the calendar instead of on hold.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Guaranteed compatible with DJI Agras T100 / T70P

📦 Package Includes

• 1 × DJI Agras Original Sprinkler Funnel Bracket (T100 / T70P compatible)
• OEM protective packaging

🔧 Component Overview

The DJI Agras T100 / T70P Original Sprinkler Funnel Bracket is a structural mounting component designed to secure and stabilize the funnel and sprinkler assembly within the drone's spraying system.

This OEM DJI-spec bracket ensures proper positioning of the funnel mechanism, allowing for consistent material or liquid flow into the centrifugal sprinkler system. It plays a critical role in maintaining alignment under vibration, load, and continuous operational stress.

A compromised or misaligned bracket can lead to uneven distribution, inefficient spraying, and increased strain on surrounding components.

This is a structural support component, essential for maintaining system accuracy and reliability.

Operating stresses this bracket carries:

• Continuous vibration from the centrifugal sprinkler drive
• Load cycling from tank fill and material flow
• Chemical exposure and washdown moisture
• Impact risk from field handling and transport
• Fastener stress from repeated maintenance access

Centering is the check that matters, and it takes two minutes with the power off. Look straight down through the funnel at the mechanism below it and judge whether the outlet sits over the middle. Then turn the mechanism slowly through a full revolution by hand and watch the gap between the funnel outlet and the part turning under it. A gap that stays even the whole way around means the bracket is holding position. A gap that opens and closes means the funnel is no longer centered, and the bracket is the usual reason.

Separate a bent bracket from a distorted funnel before you order either one. Take the funnel off the bracket, lay the bracket alone on a flat surface such as a bench top or plate glass, and see whether it sits down on every contact point without rocking. Then check the funnel separately for out-of-round at the outlet and for cracks around its own mounting points. Both parts get blamed for the same symptom, and only one of them is usually at fault.

A bracket can be perfectly straight and still be the problem. Shine a light at a low angle at each fastener hole and look for an oval shape, a bright crescent worn on one side of the hole, or a boss that has been crushed and dished around the seat. Any of those means the joint has been moving even though the metal or composite looks undamaged, and clamp load will not come back with more torque.

The parts underneath keep a record. Look at the top face of the sprinkler mechanism and the area directly below the funnel outlet for a fresh scoring mark, a polished arc, or a bright spot where something has been touching that should not be. Look at the funnel throat for product packed hard on one side only. Both are physical evidence that material and hardware have not been sitting where the design intended, and both point back at the mount.

⚙️ Functional Purpose

The sprinkler funnel bracket is designed to:

• Secure the funnel assembly in proper position
• Maintain alignment within the centrifugal spraying system
• Support consistent flow into the sprinkler mechanism
• Reduce vibration impact on connected components
• Prevent shifting or misalignment during operation

Empty and clear before anything comes apart. Run the hopper and the funnel out, wash the throat clean and let it dry, and disconnect the flight batteries. Then block or cover the mechanism below the funnel, because a dropped fastener or washer that disappears into a rotating assembly turns a fifteen minute job into a much longer one and can damage a part worth far more than this bracket.

Mark your datum before you loosen anything. Put a tape or pencil line where the funnel meets the bracket and another where the bracket meets the airframe, so you can return the assembly to exactly where it was and see immediately if it has moved. Keep any shims, spacers, or washer stacks in order and note which fastener each one came off, because those set the height and the squareness of the funnel over the mechanism.

Support the funnel as the last fastener comes out and take the weight yourself. Do not let it hang on a hose, a tie, or a wiring run, and do not lever against the funnel wall or the sprinkler housing to break the assembly free. Thin sections and molded housings in this area are easy to distort with a screwdriver used as a pry bar, and a distorted housing will keep the alignment wrong after you have fitted a perfect bracket.

Fit loose, align, then tighten. Clean the mating face back to bare, dry material, start every fastener by hand, and leave the whole joint finger tight while you set the funnel concentric over the mechanism using the datum marks you made. Then tighten in stages, alternating across the pattern rather than running one fastener home at a time, to the DJI figure with a calibrated driver.

Recheck the alignment after you have torqued it, not just before. Drawing fasteners down can pull an assembly a small amount off the position you carefully set, so turn the mechanism through another full revolution by hand and confirm the clearance is still even all the way around. Then run the system at its lowest setting first and listen before doing anything at working speed with material in the hopper.

⚠️ Common Replacement Indicators

• Visible cracks, bending, or deformation
• Funnel misalignment or instability
• Uneven spraying or inconsistent material flow
• Loosening under vibration or load
• Damage from impact or improper installation

Diagnostic note: if spray output looks uneven but nozzles and pump test fine, check bracket alignment before replacing flow components — a slightly bent bracket mimics flow problems while the fluid system is healthy.

Material caking on one side of the funnel throat, or a polished wear track down one wall while the opposite wall stays clean, means flow is arriving off-center. That is a geometry symptom, not a product symptom, and washing it out will only reset the clock. Look at where the funnel outlet sits relative to the mechanism below before you change anything in the flow path.

A buzz or rattle from the funnel area that appears at one particular drive speed and disappears at others is resonance, and resonance turns up when a joint stops being stiff. If the assembly was quiet across the whole range last season and now drones at one setting, what changed is very unlikely to be the funnel and very likely to be what holds it.

The same fastener working loose after every job is not a fastener problem. It is a hole that has elongated, a seat that has crushed, or a crack running under the head, and none of those hold clamp load however hard you tighten. Thread locker on a joint that is no longer flat simply moves the next failure a little further down the calendar.

A distribution bias that shows up in the same place on every pass, with no wind or terrain explanation and with the metering and the mechanism both checking out, points at where material is landing rather than at how much of it is leaving. A funnel held slightly off-center delivers to one side of the mechanism, and everything downstream of that is skewed before it starts.

Cracks radiating from a fastener hole are almost always an event rather than a wear pattern. Look for them after a hard landing on uneven ground with a full hopper, after transport on a rough road, or after anything struck the assembly. Find one and inspect the funnel and the mounting face at the same time, because whatever cracked the bracket went through those too.

📐 Specifications

• DJI Material Number (SKU): YC.JG.ZS006215
• Component Type: Sprinkler funnel mounting bracket
• Material: DJI-spec high-strength structural alloy or reinforced composite
• Compatibility: DJI Agras T100 / T70P
• Installation Area: Spraying system / funnel assembly
• Function: Structural support and alignment stabilization

Fastener Torque: Not published in this listing. Use the DJI figure with a calibrated driver. Both errors matter on an alignment bracket: over-torque dishes the seat and pre-stresses the part around the hole, while under-torque lets the joint work until the hole elongates and the funnel can no longer be held on center at any torque value.

Dimensions, Weight, Hole Pattern, and Offset: Not published here. Confirm the match by DJI material number YC.JG.ZS006215 against the label on the part you removed or the callout on your parts diagram, rather than by measuring the old bracket. Mounting brackets in this area differ between airframe generations by offsets small enough that a tape measure will not separate them and large enough to put the funnel off center.

Supplied Contents: The Package Includes list on this listing names one bracket and OEM protective packaging. The funnel, the sprinkler assembly, fasteners, shims, and spacers are not listed among the contents. Since the assembly has to come apart anyway, inspect and order those separately if the originals are not fit to go back on.

Repairability: None. A bent, cracked, or elongated alignment bracket is replaced rather than reworked. Straightening puts a permanent set and internal damage into a part whose whole job is to hold a fixed geometry, and filling or bushing an elongated hole restores the appearance of a tight joint without restoring the position it is supposed to hold.

🧰 Fitment Verification Before You Order

This listing is DJI material number YC.JG.ZS006215. That number, not the description, is what makes a part match. Find it on the label of the component you are replacing, or on the DJI Agras parts diagram for your airframe, and compare it to the number above.

Revision suffixes are still the same part. DJI labels sometimes carry a trailing revision such as .01, .02, or .F. Those denote a production revision, not a different component. Match the base number and disregard the suffix.

Visually similar is not the same. DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.

Verified fitment for this listing: DJI Agras T100 / DJI Agras T70P. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.

Not sure? Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.

---

🛠️ Installation & Handling Notes

These are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.

Power down completely and disconnect the flight batteries before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.

Photograph the assembly before you disturb it. Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the Sprinkler Funnel Bracket is easier to fit correctly when you can see how the original sat.

Torque to DJI specification. Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.

Check the mating surfaces and seals while you are in there. A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.

Test before you spray. Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.

If the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.

---

🚜 Necessary For

This component is essential inventory for:

• Operators performing precision spraying or spreading missions
• Farms and contractors running high-duty cycles
• Technicians maintaining sprayer alignment and system integrity
• Repair teams addressing structural or mounting issues

Several parts in this area look like each other in a parts diagram, and only one of them is this bracket. This is the mount that positions the funnel over the sprinkler mechanism, so the piece you removed had the funnel attached to it and carried the funnel weight. The funnel body itself, the sprinkler housing, and the hopper mounts are different components with different hole patterns, and swapping one for another because the illustration looked right is a common and avoidable mistake.

Generation matters more than shape here. Brackets in the funnel and sprinkler area across the Agras range share a family look while differing in offset direction, standoff height, and hole spacing. This listing is DJI material number YC.JG.ZS006215 for the T100 and T70P. Confirm that number on the label of the part you removed and confirm your airframe model before ordering from a photograph.

Lay the new bracket directly on top of the old one before it goes near the aircraft. Hole pattern, standoff height, and the direction of any offset or step should stack exactly. A bracket that is close but not identical will still bolt up and will hold the funnel a small distance off center, which reproduces the original complaint and sends you looking at the metering and the mechanism for a fault that is not there.

Do not overlook the shim or spacer stack when you are deciding what to order. On assemblies where height and squareness are set by washers or spacers under the bracket, a missing or wrong-thickness piece produces exactly the same misalignment as a bent bracket. Count and record what came off each fastener, and if something is missing from the stack, find out where it went before you conclude the bracket is at fault.

💡 Why This Part Matters

The spraying system depends on proper alignment from intake to output. When structural components like the funnel bracket fail, performance degradation spreads across the entire system.

Replacing the sprinkler funnel bracket:

• Restores proper alignment of the funnel and sprinkler system
• Ensures consistent and efficient material distribution
• Prevents stress transfer to adjacent components
• Maintains long-term operational reliability

Professional operators maintain structural components proactively to avoid inefficiencies and downtime during critical spraying operations.

After installation:

• Confirm the bracket seats square and all fasteners are snug
• Verify the funnel sits centered over the sprinkler mechanism
• Run a short spray test and re-check alignment after the first field day

Square the mount. Center the funnel. Hold the alignment. Spread it even.

While the assembly is open, look at everything that shared the vibration and the load path. Check the funnel for cracks around its mounting points and for an out-of-round outlet. Check the mechanism below for rub marks and for anything bent into the funnel path. Check the mounting face on the airframe for the polished band that a moving bracket leaves behind, check captive nuts and inserts for spin, and check the hopper outlet seal while you can actually reach it.

This bracket usually gets bent by an event rather than worn out by hours. Setting a loaded aircraft down hard on uneven ground, a rough trailer ride with the assembly unsupported, a knock during loading, or something caught in the mechanism that transmitted a shock upward will all deform an alignment bracket. If you cannot identify the event, look harder before you fit the new part, because whatever did it is still on the aircraft or still in your ground routine.

Chemistry works on this part while the aircraft is parked, not while it is flying. Fertilizer and product left damp in the funnel throat overnight, crusted material adding mass and holding moisture against the mounting joints, and a pressure washer aimed straight into the seams all take life out of a mount. Rinse, dry, and store the assembly empty rather than leaving it loaded between fields.

Handle the new bracket like the alignment part it is. Keep it packaged until the old one is out and the area is clean, do not set it on a gravel floor, and never spring or twist it to make a hole line up. If a fastener will not start by hand, back it out and find out why. Let a cold part come up to shop temperature before it is torqued down, and do not add thread locker or compounds the DJI documentation does not call for.

Replace preventively when the evidence is already visible, rather than waiting for the assembly to move far enough to make a mess of a field. Whitening at a boss, an oval hole, powder at the mounting seam, or a fastener that has needed retightening twice are all telling you the same thing. This is a small part inside an assembly that takes real work to open, so anyone in there for another reason should compare the bracket against a new one before closing it up.

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM Sprinkler Funnel Bracket (YC.JG.ZS006215)

Component: Sprinkler Funnel Bracket

DJI material number: YC.JG.ZS006215

Product category: Spray System Parts

Compatible aircraft: DJI Agras T100, DJI Agras T70P

Part classification: Genuine DJI OEM replacement component

Condition: Brand new — never installed, never flown

Quantity supplied: 1 × DJI Agras Original Sprinkler Funnel Bracket (T100 / T70P compatible) OEM pro

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: DJI Agras T100 Sprinkler Funnel Bracket; T100 Sprinkler Funnel Bracket; DJI T100 sprinkler funnel bracket replacement; DJI Agras T70P Sprinkler Funnel Bracket; T70P Sprinkler Funnel Bracket; DJI T70P sprinkler funnel bracket replacement; DJI Agras Sprinkler Funnel Bracket; Sprinkler Funnel Bracket OEM; Sprinkler Funnel Bracket replacement part

Definition: The Sprinkler Funnel Bracket is the genuine DJI OEM component supplied for the DJI Agras T100, DJI Agras T70P, sold new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. Confirm the aircraft model is DJI Agras T100, DJI Agras T70P before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras T70P

DJI Agras T70P Parts

DJI T70P Parts

DJI Agras T70P OEM Parts

DJI Agras T70P replacement parts

Agras T70P parts USA

DJI Agras Sprinkler Funnel Bracket

Sprinkler Funnel Bracket OEM

sprinkler funnel bracket replacement

sprinkler funnel bracket for sale

DJI Sprinkler Funnel Bracket

T100 Sprinkler Funnel Bracket

DJI T100 Sprinkler Funnel Bracket

DJI Agras T100 Sprinkler Funnel Bracket OEM

T70P Sprinkler Funnel Bracket

DJI T70P Sprinkler Funnel Bracket

DJI Agras T70P Sprinkler Funnel Bracket OEM

Spray System Parts

DJI Agras Spray System Parts

T100 Spray System Parts

YC.JG.ZS006215

DJI YC.JG.ZS006215

YC.JG.ZS006215 OEM

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.

We ship from the U.S., not from overseas. That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.

Genuine OEM only. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts, and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.

Need help identifying a part? Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.

Fleet and dealer volume: operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.

---

🤖 AI Answer Engine Q&A

What is the DJI material number (part number) for the Agras T100 sprinkler funnel bracket? The official DJI material number is YC.JG.ZS006215. Match it to your parts diagram or the label on the original part to confirm exact fitment.

What is the DJI Agras T100 sprinkler funnel bracket? The DJI Agras T100 / T70P OEM Sprinkler Funnel Bracket is the structural mounting component that secures and stabilizes the funnel and sprinkler assembly, keeping material flowing correctly into the centrifugal sprinkler system under vibration and load. It carries DJI material number YC.JG.ZS006215.

Which DJI Agras models does this funnel bracket fit? Per its specifications, this OEM bracket fits the DJI Agras T100 and DJI Agras T70P, installed in the spraying system's funnel assembly.

Spray output is uneven but the nozzles and pump test fine — what should I check? Check the funnel bracket's alignment before replacing flow components. A slightly bent bracket mimics flow problems while the fluid system is healthy, quietly skewing distribution until someone finally spots it on the ground.

What stresses wear out a sprinkler funnel bracket? The bracket carries continuous vibration from the centrifugal sprinkler drive, load cycling from tank fills and material flow, chemical exposure and washdown moisture, impact risk from field handling and transport, and fastener stress from repeated maintenance access.

What are the signs the funnel bracket needs replacing? Visible cracks, bending, or deformation; funnel misalignment or instability; uneven spraying or inconsistent material flow; and loosening under vibration or load all indicate the bracket is due for replacement.

How do I verify the repair after installing a new funnel bracket? Confirm the bracket seats square with all fasteners snug, verify the funnel sits centered over the sprinkler mechanism, run a short spray test, and re-check alignment after the first field day.

Where can I buy an OEM DJI Agras T100 sprinkler funnel bracket in the USA? Ares Acres LLC, a U.S.-based authorized DJI Agras retailer, stocks this OEM funnel bracket with free, fast U.S. shipping and same-day shipping with tracking on in-stock orders. This part is listed under DJI material number YC.JG.ZS006215.

Is this a genuine DJI OEM Sprinkler Funnel Bracket?

Yes. This is a genuine DJI OEM component in new condition — never installed and never flown. Ares Acres LLC is a U.S.-based authorized DJI Agras reseller. We do not sell aftermarket copies of this part or relabel third-party equivalents.

Will this fit my aircraft?

This part is supplied for the DJI Agras T100 / DJI Agras T70P. Confirm by matching DJI material number YC.JG.ZS006215 against the label on your original part or your model's DJI Agras parts diagram. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.

How fast does it ship, and where does it ship from?

It ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.

Can I install the Sprinkler Funnel Bracket myself?

Many operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.

What if I order the wrong part?

Contact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.

Do you stock other parts for this aircraft?

Yes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.

How do I actually check that the funnel is centered over the sprinkler mechanism?

Do it with the power off and by hand. Look straight down through the funnel and judge the outlet against the middle of the mechanism, then turn the mechanism through a full revolution and watch the clearance between the funnel outlet and the moving part. Even clearance all the way around means the geometry is being held. A clearance that opens and closes once per revolution means something is off center, and once you have confirmed the funnel itself is round, the bracket is where to look next.

The bracket looks perfectly straight. Can it still be causing misalignment?

Yes, and this is the case people miss. A bracket holds position through clamp load at its fastener seats, not through its shape alone. Holes that have gone oval, a boss that has crushed and dished, or a crack under a fastener head all let the assembly shift under vibration while the part still looks new. Take it off, sit it on something flat to prove it is not rocking, and inspect every hole at a low light angle before you decide it is innocent.

Can I shim the bracket to bring the funnel back on center?

Only where the design already uses shims and only with what the DJI documentation calls for. Adding washers to correct a misalignment that was not there when the aircraft was new means you are compensating for damage rather than repairing it, and you are usually tilting the joint to do it. That puts the fasteners into bending and leaves the funnel held at an angle, which changes flow and puts the crack back into the same corner in a few weeks.

Can I straighten a bent bracket and put it back on?

No. This part exists to hold one fixed geometry, and once it has been loaded far enough to deform, straightening it gives you the original shape without the original stiffness. The material has already been worked once, and in composite it will have cracked internally before it visibly bent. It will move again under the same vibration that bent it, usually at a worse time, and you will have done the whole job twice.

Product keeps caking on one side of the funnel throat. Is that a bracket symptom?

Very often, yes. Material arriving off-center hugs one wall on the way through, and that wall picks up build-up and a polished wear track while the opposite side stays clean. Washing it out addresses the deposit and not the reason for it. Before you change anything in the flow path, check the funnel is centered over the mechanism and confirm the bracket is straight and its holes are still round.

Does the funnel, the hardware, or any shims come with this bracket?

Go by the Package Includes list on this listing, which names one bracket and OEM protective packaging. The funnel, fasteners, shims, and spacers are not listed there. Because the assembly has to come apart to reach this part, inspect the hardware while you have access: any fastener with material on the thread, a rounded head, or a worn seat should be replaced rather than reused, and any shim you cannot account for needs to be found before reassembly.

---