DJI Agras T100 OEM Water Tank Lid (YC.JG.ZS006110)

OEM Water Tank Lid | Spreading System Cover | Spray Tank Sealing Lid | Payload Containment Cover | DJI Material Number YC.JG.ZS006110

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A missing or leaking tank lid means spilled chemical, lost payload, contaminated product, and a drone that cannot fly loaded. It is the one payload component that is deliberately taken off and set down at every fill — which is exactly why it goes missing, gets stepped on, gets knocked off a tailgate, and comes back to the aircraft in worse condition than it left. On the T100 and T70P it closes the payload opening for liquid work and spreading work alike, so whichever job the aircraft is set up for that week, the same part decides whether the load stays where it belongs.

The economics are as plain as the part. This cover costs a fraction of a single tank of product, and it stands directly in front of both the product and the aircraft carrying it. Every ounce that escapes a bad seal is chemical paid for and never sprayed — and chemical running down an airframe is worse than wasted, because it lands on hardware that was never meant to see it. Replacing a tired cover is inexpensive and immediate. Flying one is a slow bill paid in lost product, extra washdowns, and corrosion nobody attributes to the lid.

We use specialized technicians to deliver the DJI Agras OEM Water Tank Lid / Spreading System Cover ordered.

That is why Ares Acres focuses on fast fulfillment, responsive support, reliable sourcing, and genuine DJI components that help American drone operators keep payloads contained, minimize downtime, and maximize productivity in the field.

For commercial applicators, custom spraying businesses, growers, and fleet operators, payload containment is flight-critical.

---

✅ DJI Agras T100 / T70P Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × Original DJI Agras OEM Water Tank Lid / Spreading System Cover
• Direct OEM replacement component
• Factory-specification sealing design
• Tool-free removal and secure closure
• DJI material number YC.JG.ZS006110
• Brand new condition — never installed
• OEM protective packaging

---

🔧 Component Overview

The DJI Agras Water Tank Lid / Spreading System Cover is the OEM sealing component that closes and protects the high-capacity liquid tank and spreading system on the DJI Agras T100 and T70P platforms, listed under DJI material number YC.JG.ZS006110. It provides the secure seal that keeps fertilizers, pesticides, herbicides, and dry material properly contained through takeoff, aggressive flight maneuvers, and landing.

A tank is only as good as its seal. This cover prevents leaks, evaporation, contamination, and material loss — protecting both the payload inside and the drone systems around it. It is built from high-impact, weather-resistant, UV-resistant OEM-specification material, and it removes and closes without tools so routine refills and maintenance stay fast. That last point matters more than it sounds: a closure that needs coaxing is a closure that gets rushed, and a rushed closure is how a full tank ends up on the outside of the aircraft.

The Water Tank Lid / Spreading System Cover holds:

• The seal across the payload opening
• Liquid product contained through takeoff, maneuvering, and landing
• Dry and granular material contained during spreading work
• Evaporation and material loss held in check
• External contamination — dust, moisture, field debris — out of the load
• Chemical off the airframe and the hardware beneath it
• Tank pressure and flow consistency during application
• Secure containment during transport between fields
• Tool-free access for routine refills and maintenance
• The line between a payload system and a liability

This component operates in demanding agricultural environments, including:

• Crop spraying missions
• Liquid fertilizer application
• Herbicide and fungicide treatments
• Seed and granular spreading operations
• Orchard and vineyard work
• Precision agriculture programs
• Large-scale commercial farming
• Multi-drone fleet operations
• Daily commercial deployments
• High-acreage contract work

Every mission exposes this component to:

• Direct chemical contact and residue
• Repeated open-close refill cycles
• UV exposure and heat cycling
• Payload pressure and sloshing in flight
• Continuous airframe vibration
• Rain, humidity, and washdown moisture
• Dust and airborne field debris
• Handling and impact at the fill point
• Transport between fields with a partly loaded tank
• Long commercial operating hours across a full season

All of that lands on a part that is expected to seal on the first close, every close, dozens of times a day. Sealing components do not fail the way mechanical ones do. There is no noise, no fault code, and no warning light — the material simply loses the geometry it needs, and the first sign is a wet streak somebody notices on the walk back to the tender. That is why this part is treated as a consumable in professional fleets rather than as permanent hardware, and why a spare on the shelf is normal practice rather than over-preparation.

The OEM Water Tank Lid / Spreading System Cover helps maintain:

• Complete payload containment on liquid and spreading work alike
• A dependable seal across the payload opening
• Consistent tank pressure and flow
• Accurate application rates
• Protected drone electronics and hardware
• Clean refill and transport handling
• Reduced chemical waste
• Safer operator working conditions
• Maximum aircraft availability
• Dependable commercial performance

For operators loading and unloading a payload tank all day, containment integrity is not a detail — it is the condition every other part of the operation depends on.

---

⚙️ Functional Purpose

The Water Tank Lid seals the payload tank and spreading system, keeping liquid and dry material contained and protected throughout every mission.

This component helps:

• Prevent payload leaks during flight
• Stop evaporation and material loss
• Block external contamination of the payload
• Contain dry and granular material during spreading operations
• Maintain tank pressure and flow consistency
• Protect application rate accuracy
• Keep chemicals off the airframe and electronics
• Support safe transport between fields
• Prevent spillage during refills and handling
• Protect operators from chemical exposure
• Extend the life of surrounding drone systems
• Support clean, professional field operations
• Restore factory sealing on a high-hour aircraft
• Keep spare sealing hardware field-ready
• Maintain reliable field performance

Contained payload is applied payload. Every ounce that leaks out of a bad seal is chemical paid for and never sprayed — and chemical running down an airframe is worse than wasted. The loss shows up twice: once at the invoice for product that never reached the crop, and again over months in corrosion and residue on components that cost far more than the cover ever did.

A sound cover keeps the payload where it belongs through season after season of commercial duty.

A worn or damaged cover may contribute to:

• Chemical leaks onto the airframe and electronics
• Payload loss and wasted product
• Inconsistent application rates
• Contaminated payload material
• Corrosion of surrounding components
• Chemical exposure during handling
• Failed pre-flight inspections
• Unexpected downtime
• Higher operating costs

Replacing a worn cover restores the sealed containment the payload system was engineered around.

---

⚠️ Common Replacement Indicators

Replacement may be recommended when operators observe:

• Visible leaks around the lid during flight or transport
• Cracked or warped lid body
• Degraded or flattened sealing surface
• Lid no longer closes securely
• Chemical residue trails below the tank opening
• Payload contamination from dust or moisture
• UV chalking, fading, or brittleness
• Chemical degradation of the material
• Stripped or worn latching interface
• Impact damage from handling or transport
• Lost or misplaced original lid
• Pressure inconsistency during spraying
• Routine maintenance findings
• Fleet refurbishment programs
• Long-term commercial wear

Common causes of failure include prolonged chemical contact, UV degradation, over-tightening, repeated refill-cycle wear, and material fatigue from heat cycling in the field. None of those are unusual duty — they are simply what a full season of commercial application does to a sealing component that lives on top of the payload, in the sun, being opened and closed all day. Two of them are within the operator's control. Over-tightening is the most common self-inflicted failure, because forcing a stiff closure to compensate for a tired seal loads the body rather than the sealing surface and turns a seal problem into a cracked-housing problem. And residue left to sit is the most common accelerator, because dried product on a sealing face works against the material every hour it stays there. It is also worth noting that a lost or misplaced lid is a listed replacement reason on its own — an aircraft cannot be loaded without one, so a missing cover grounds the aircraft just as effectively as a broken part.

Replacing a worn lid is one of the cheapest ways to protect an expensive payload and an even more expensive aircraft.

---

📐 Specifications

DJI Material Number: YC.JG.ZS006110

Part: Water tank lid / spreading system cover

Component Type: Payload containment sealing cover

Compatibility:

• DJI Agras T100
• DJI Agras T70P

Package Quantity: 1 piece

Installation Area: Aircraft payload opening — liquid tank and spreading system

Function: Seals the payload tank and spreading system, keeping liquid and dry material contained and protected throughout every mission

Design: Sealed closure preventing leaks, evaporation, and external contamination

Construction: High-impact, weather-resistant, UV-resistant OEM-specification material

Installation: Tool-free removal and secure closure for routine refills and maintenance

Mounting Type: Direct OEM replacement component

Application: Professional agricultural drone payload containment

Condition: Brand new

Product Classification: Spray system parts

---

🚜 Necessary For

This tank lid is ideal for:

• DJI Agras T100 operators
• DJI Agras T70P operators
• Commercial spraying contractors
• Agricultural aviation providers
• Large farming operations
• Precision agriculture companies
• Custom application businesses
• Fleet maintenance managers
• Agricultural drone technicians
• Professional drone service providers
• Drone repair facilities
• Multi-aircraft fleets
• Spreading and granular application crews
• Payload system refurbishment projects
• Operators maintaining spare parts inventory
• Professional agricultural drone operators

Especially valuable during:

• Pre-season maintenance checks
• Spring application season
• Summer spraying operations
• High-frequency refill operations
• Spreading season programs
• Multi-drone deployments
• High-volume commercial contracts
• Peak agricultural seasons

When a missing or leaking cover can ground a loaded aircraft, keeping a spare on the shelf keeps operations moving.

---

💡 Why This Part Matters

For commercial agricultural drone operators, the tank lid is the difference between a payload system and a liability. Sealed, it is invisible — the load goes in, the load goes out through the nozzles or the spreader, and nobody thinks about the part on top. Compromised, it turns every flight into a slow contamination event that spreads product across the airframe, into places it will never be fully cleaned out of, and onto hardware that quietly pays for it over the following months.

Every leak wastes chemical, corrodes hardware, contaminates fields unevenly, and puts residue where it never belongs. A properly sealed tank protects the payload, the aircraft, the operator, and the application quality — all at once, which is unusual for a part at this price. What makes lid leaks especially worth catching early is where they happen. Most leaks inside a spray system stay inside the plumbing, where the worst outcome is lost product. A lid leak happens on top of the aircraft, where vibration and airflow carry chemical down across the airframe, the hardware, and the electronics. That is why a small leak at the cover is a bigger problem than a larger leak somewhere sealed, and why experienced crews replace a marginal cover rather than watching it.

The OEM Water Tank Lid helps maintain:

• Complete payload containment
• Consistent tank pressure and flow
• Accurate application rates
• Protected drone electronics and hardware
• Clean refill and transport handling
• Reduced chemical waste
• Safer operator working conditions
• Reduced in-field troubleshooting
• Maximum aircraft availability
• Long-term system reliability
• Dependable commercial performance

Without a sound tank seal, operators risk:

• Chemical leaks onto the airframe and electronics
• Payload loss and wasted product
• Inconsistent application rates
• Contaminated payload material
• Corrosion of surrounding components
• Chemical exposure during handling
• Failed pre-flight inspections
• Unexpected downtime
• Higher operating costs
• Reduced operational confidence

For practical, hardworking operators, the value is simple:

Protect the payload. Protect the aircraft. Protect the application. Protect the operation.

The DJI Agras T100 / T70P Water Tank Lid and Spreading System Cover delivers the sealed containment, OEM fit, and field durability needed to keep commercial agricultural drone payloads exactly where they belong — in the tank until they hit the crop. Keeping one on the shelf means a compromised seal costs minutes instead of a load, and that difference is what separates a good season from a frustrating one.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T100 OEM Water Tank Lid (YC.JG.ZS006110)

DJI material number: YC.JG.ZS006110

Component: Water tank lid / spreading system cover

Product category: Spray System Parts

Compatible aircraft: DJI Agras T100, DJI Agras T70P

Installed position: Aircraft payload opening — liquid tank and spreading system

Primary function: Seals the payload tank and spreading system, keeping liquid and dry material contained and protected throughout every mission

Condition: Brand new

Quantity supplied: 1 piece

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: YC.JG.ZS006110; DJI YC.JG.ZS006110; YC.JG.ZS006110 DJI Agras; DJI Agras T100 Water tank lid / spreading system cover; T100 Water tank lid / spreading system cover; DJI T100 water tank lid / spreading system cover replacement; DJI Agras Water tank lid / spreading system cover; Water tank lid / spreading system cover OEM; Water tank lid / spreading system cover replacement part

Definition: The Water tank lid / spreading system cover (DJI material number YC.JG.ZS006110) is the genuine DJI OEM component fitted at Aircraft payload opening on the DJI Agras T100, DJI Agras T70P, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.JG.ZS006110. Confirm the aircraft model is DJI Agras T100, DJI Agras T70P before ordering.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras T70P

DJI Agras T70P Parts

DJI T70P Parts

DJI Agras T70P OEM Parts

DJI Agras T70P replacement parts

Agras T70P parts USA

YC.JG.ZS006110

DJI YC.JG.ZS006110

YC.JG.ZS006110 replacement

DJI Agras YC.JG.ZS006110 part

DJI Agras Water tank lid / spreading system cover

Water tank lid / spreading system cover OEM

water tank lid / spreading system cover replacement

water tank lid / spreading system cover for sale

DJI Water tank lid / spreading system cover

T100 Water tank lid / spreading system cover

DJI T100 Water tank lid / spreading system cover

DJI Agras T100 Water tank lid / spreading system cover OEM

T70P Water tank lid / spreading system cover

DJI T70P Water tank lid / spreading system cover

DJI Agras T70P Water tank lid / spreading system cover OEM

Spray System Parts

DJI Agras Spray System Parts

T100 Spray System Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

What is the water tank lid on a DJI Agras T100, and what is its DJI part number? It is the OEM cover that closes and seals the payload opening, keeping liquid or dry material contained through takeoff, flight maneuvers, and landing. It is listed as both the water tank lid and the spreading system cover, so it serves the payload opening on liquid and spreading work alike. Its official DJI material number is YC.JG.ZS006110. Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, stocks it brand new, one piece per order.

Which DJI Agras models does this tank lid fit? Its listed compatibility is the DJI Agras T100 and the DJI Agras T70P, supplied as one piece. Match material number YC.JG.ZS006110 to your parts diagram or to the label on the original part to confirm exact fitment before ordering, and confirm the model, since payload hardware varies across Agras platforms.

How do I tell whether chemical on the airframe is coming from the lid or from somewhere else in the system? Follow the direction the product traveled, because that is the one thing a leak cannot hide. Load the tank with clean water, close the cover the way it is normally closed, and look at the aircraft from the top down before flying. A lid failure starts high — wetness under the lip, residue trails running down from the tank opening, streaking that begins at the seal line and works downward with vibration and airflow. A plumbing, fitting, or pump leak starts low and stays local: the wetness begins below the tank at a hose, a joint, or a housing, and it does not track back up to the opening. Then read the cover itself. A degraded or flattened sealing surface, a cracked or warped body, UV chalking and brittleness, or a latching interface that is stripped, worn, or no longer closes securely all point at the cover, and any one of them is enough on its own. A cover that latches securely, seals dry under a full static load, and shows a clean, resilient sealing face has effectively cleared itself, and the search moves down into the system. This is the distinction worth making before anything gets taken apart, because a cover is one of the least expensive parts on the aircraft while a spray-system teardown costs a day — and residue on the airframe looks identical whichever end it came from.

Why does a leaking tank lid matter more than the chemical it wastes? Because of where it leaks. Most leaks inside a spray system stay inside the plumbing. A lid leak puts chemical on top of the aircraft, where vibration and airflow carry it down across the airframe, hardware, and electronics — so the real cost is corrosion of surrounding components, not the lost product. A small lid leak is a bigger problem than a larger leak somewhere sealed.

Is the tank lid a safety item? Yes, for the people handling the aircraft as much as for the aircraft. A lid that no longer latches securely allows spillage during refills, handling, and transport between fields with a partly loaded tank — which is exactly when a person is closest to the chemical. Secure closure is part of the operator's protection, not only the payload's, and it is one of the reasons a marginal cover is worth replacing rather than nursing through the rest of a season.

Can a worn lid affect spray consistency? It can. Pressure inconsistency during spraying is listed among the replacement indicators for this part, and maintaining tank pressure and flow consistency is listed among what the seal does — so a lid in poor condition is worth confirming before an inconsistency is chased further into the spray system. Checking a five-minute item before a half-day diagnosis is simply the cheaper order of operations.

What are the signs a DJI Agras tank lid needs replacing? Visible leaks around the lid in flight or transport, a cracked or warped body, a flattened or degraded sealing surface, a lid that no longer closes securely, a stripped or worn latching interface, chemical residue trails below the tank opening, dust or moisture getting into the payload, UV chalking, fading, or brittleness of the material, chemical degradation, impact damage from handling or transport, and pressure inconsistency during spraying. Routine maintenance findings and fleet refurbishment programs put a cover on the list on their own — and so does a lost or misplaced original lid, which is a listed replacement reason in its own right. The lid is the one payload component deliberately taken off and set down at every fill, and an aircraft cannot be loaded without one, so a missing cover grounds the aircraft just as effectively as a broken part. That is why fleets filling in the field keep a spare with the aircraft rather than back in the shop.

Why do tank lids wear out? Prolonged contact with agricultural chemicals, UV degradation and heat cycling in the field, material fatigue from repeated refill cycles, over-tightening at closure, and impact damage during handling and transport. It is a sealing component in daily service, which is why it is treated as a replaceable part rather than a permanent one — and why over-tightening deserves particular attention, since forcing a closure to compensate for a tired seal cracks the body and turns a seal problem into a housing problem.

Where can I buy a DJI Agras T100 water tank lid in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras OEM tank and payload parts for American operators, with free and fast U.S. shipping plus same-day shipping and tracking on in-stock parts. This part is listed under DJI material number YC.JG.ZS006110.