DJI Agras T100 OEM Weight Sensing Service Kit

T100 OEM Weight Sensing Service Kit | DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01) | DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) | DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402) | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 3 component lines, 3 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The T100 OEM Weight Sensing Service Kit exists because the parts inside it are the ones that strand a T100 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras T100 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Configured using the T100 variants of the included products. Every component in this kit remains available separately in the Ares Acres catalog.

---

📦 Package Includes

• 1 × DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01)
• 1 × DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119)
• 1 × DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402)

---

🔧 Kit Overview

The DJI Agras T100 OEM Weight Sensing Service Kit is an Ares Acres curated repair package that groups the components this job actually consumes into a single purchase. Application rate accuracy depends on the aircraft knowing what it is carrying. Front and rear weight sensors work as a pair, and the signal cable between them is as likely to be the fault as either module.

This product is assembled by Ares Acres from genuine DJI OEM components sold individually in our catalog. It is not represented as a factory-packaged DJI kit.

---

🔩 Component-by-Component Breakdown

1. DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01)

DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01) — DJI material number BC.AG.SS001067.

Functionally, the DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01) is responsible for a short and specific list of jobs: measuring real-time payload weight distribution, feeding load data to the flight control system, supporting accurate center-of-gravity calculations, and enabling safe takeoff, hover, and landing logic. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Support the payload before you touch the mount. Batteries out, tank empty, and the airframe steady on stands or a bench so that no part of the aircraft weight is hanging on the front load point when the last fastener comes loose. A load cell that catches the nose of the machine as it drops the final quarter inch is a new part you have just ruined, and it will still bench test fine while reading wrong once it is on the aircraft.

Release the connector by its body, not by the lead, and back the mounting fasteners off evenly rather than running one out completely first. Lift the module straight off its seat. Do not lever a screwdriver between the sensor and the frame to break a stuck part loose, and never use the sensor body as a handle to move the assembly around the bench. Both of those put force into the strain element in a direction it was never built to carry, and that damage does not show.

Clean and inspect the seat before the new module goes near it. The mounting face has to be flat, dry, and free of grit, because a load cell reads the strain in its own body and anything trapped underneath distorts that body before the payload ever gets there. Dress off any corrosion, wipe out dried spray residue, and check that the seat itself is not dished, elongated, or cracked from whatever event took the old sensor out.

The DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01) earns its place in this kit because of how it fails. Operators replace it when they see payload weight mismatch warnings, flight restrictions despite correct loading, inconsistent spray or spread behavior, or calibration errors after maintenance or impact. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119)

DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) — DJI material number BC.AG.SS001119. Spreading-system weighing sensor / payload load-monitoring module. It installs at the aircraft rear spreading-system weighing assembly. Its job on the aircraft is straightforward: measures payload weight while supporting intelligent spreading operations.

On the DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119), construction is dJI Original electronic weighing sensor assembly; it mounts as direct-fit OEM replacement component; this line supplies 1 Sensor Module. Fitment covers DJI Agras T100, DJI Agras T70P. Application: agricultural drone payload weighing and spreading system. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) is responsible for a short and specific list of jobs: measure payload weight during operation, monitor material remaining in the spreader, support intelligent spreading functions, improve application accuracy, maintain weight-reading consistency load to load, support precision agriculture programs, reduce material waste from misapplication, improve operational efficiency, restore OEM load-monitoring performance, and support automated and variable-rate application. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Left in service past its useful life, the DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) may contribute to incorrect payload readings, inaccurate remaining-material calculations, application inconsistencies across a field, weight sensor warnings and fault messages, reduced spreading accuracy, unexpected spreading interruptions, increased maintenance requirements, operational downtime and fleet scheduling delays, and higher material and operating costs. A fresh one instead maintains accurate payload monitoring load after load, reliable, repeatable weight measurement, consistent application rates across the field, improved spreading efficiency, better material management and planning, reduced product waste, application records that reconcile, professional fleet performance, and maximum aircraft uptime.

The OEM Rear Weight Sensor Module is designed to provide accurate payload monitoring for the intelligent spreading system of the DJI Agras T100 and T70P, measuring the weight on board and supplying that measurement continuously through the mission.

In commercial agricultural operations, accurate load monitoring directly affects spreading accuracy and operational profitability. The aircraft cannot apply a rate it cannot weigh — every intelligent spreading decision is downstream of the number this sensor reports, and a measurement that has drifted takes the whole chain of decisions with it.

The DJI Agras T100 - T70P Original Rear Weight Sensor Module is the load-monitoring sensor in the aircraft's rear spreading-system weighing assembly, listed under DJI material number BC.AG.SS001119 and supplied as a direct-fit OEM replacement component.

The DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) earns its place in this kit because of how it fails. Operators replace it when they see weight sensor fault messages, incorrect payload readings, inconsistent weight measurements between loads, material calculation errors, load-monitoring faults, sensor communication errors, unexpected warning messages during spreading, or reduced spreading accuracy. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402)

DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402) — DJI material number YC.XC.XX001402. It installs at the the weight sensing system. Its job on the aircraft is straightforward: weighing the payload in real time so the aircraft knows exactly what it is carrying.

On the DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402), construction is dJI OEM harness with factory connectors, jacketing, and sealing for its exact route. Fitment covers DJI Agras T100, Position: the weight sensing system, Diagram sheet: Weight Sensor Module (official T100 parts list). Application: dJI Agras T100 payload measurement system service and repair. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402) is responsible for a short and specific list of jobs: maintains the tolerances and interfaces the surrounding parts depend on, preserves the sealing and protection strategy of the platform, keeps failure modes visible and diagnosable instead of mysterious, restores factory behavior immediately upon correct installation, protects the more expensive components it works alongside, carries the exact DJI specification for its position, supports safe, predictable operation under full payload, eliminates the guesswork of near-fit substitutes, keeps the aircraft inside its designed maintenance program, and holds up across a full season of professional duty. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

The weight sensor signal cable is designed to do one job in the weight sensing system and do it to specification: weighing the payload in real time so the aircraft knows exactly what it is carrying.

Function on the T100 is a chain: payload measurement system performance depends on the weight sensing system, and the weight sensing system depends on every part in it holding specification. This component is one link in that chain — and chains fail at the worn link, not the average one.

That is why the platform's maintenance philosophy is inspection and renewal, not run-to-failure. The operators with the best uptime records are not the ones with the newest aircraft — they are the ones who replace parts like this when inspection says so, on their own schedule instead of the failure's.

The DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402) earns its place in this kit because of how it fails. Operators replace it when they see intermittent faults that move with cable flex, errors after arm fold or unfold, chafed, cut, or abraded jacket, corroded, bent, or discolored connector pins, function dropouts under vibration, water or chemical residue inside connector shells, stiff, cracked jacket from UV or chemical exposure, or failures that clear when the connector is wiggled. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The T100 OEM Weight Sensing Service Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01) — supplied for the application named in the kit title
• DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) — Measures payload weight while supporting intelligent spreading operations
• DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402) — Weighing the payload in real time so the aircraft knows exactly what it is carrying

Complete the aircraft weight calibration routine after replacing any sensor in this group.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• Payload weight mismatch warnings
• Flight restrictions despite correct loading
• Inconsistent spray or spread behavior
• Calibration errors after maintenance or impact
• Weight sensor fault messages
• Incorrect payload readings
• Inconsistent weight measurements between loads
• Material calculation errors
• Load-monitoring faults
• Sensor communication errors
• Unexpected warning messages during spreading
• Reduced spreading accuracy
• Physical impact damage
• Moisture intrusion at the module
• Corrosion on the sensor or its connections
• Wiring damage at the assembly
• Maintenance inspection findings
• Long-term commercial wear on high-hour aircraft
• Intermittent faults that move with cable flex
• Errors after arm fold or unfold
• Chafed, cut, or abraded jacket
• Corroded, bent, or discolored connector pins
• Function dropouts under vibration
• Water or chemical residue inside connector shells
• Stiff, cracked jacket from UV or chemical exposure
• Failures that clear when the connector is wiggled
• Pinched or crushed sections from previous repairs
• Melted or discolored jacket near power electronics
• Faults after a hard landing pulled routing tight
• Continuity that fails only under load

Any one of these on a T100 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the T100 OEM Weight Sensing Service Kit on a T100; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01). Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119). Work at the aircraft rear spreading-system weighing assembly. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it measures payload weight while supporting intelligent spreading operations as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402). Work at the the weight sensing system. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it weighing the payload in real time so the aircraft knows exactly what it is carrying as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the T100 OEM Weight Sensing Service Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 3

Aircraft coverage: DJI Agras T100

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01)
DJI Material Number: BC.AG.SS001067

DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119)
DJI Material Number: BC.AG.SS001119
Component Type: Spreading-system weighing sensor / payload load-monitoring module
Installation Area: Aircraft rear spreading-system weighing assembly
Function: Measures payload weight while supporting intelligent spreading operations
Package Quantity: 1 Sensor Module
Construction: DJI Original electronic weighing sensor assembly
Mounting Type: Direct-fit OEM replacement component
Compatibility: DJI Agras T100, DJI Agras T70P

DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402)
DJI Material Number: YC.XC.XX001402
Installation Area: The weight sensing system
Function: Weighing the payload in real time so the aircraft knows exactly what it is carrying
Construction: DJI OEM harness with factory connectors, jacketing, and sealing for its exact route
Compatibility: DJI Agras T100, Position: the weight sensing system, Diagram sheet: Weight Sensor Module (official T100 parts list)

---

🚜 Necessary For

• Incorrect payload weight readings
• Application rate errors
• Weight sensor fault codes
• Post-crash sensor inspection

The T100 OEM Weight Sensing Service Kit suits operators running DJI Agras T100 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

A weight reading fault looks identical whether the cause is a sensor or the cable carrying its signal, so a technician needs all three to diagnose it in one visit rather than swapping parts across three orders.

Bought separately, these 3 lines are 3 chances to order the wrong variant, 3 shipments to wait on, and 3 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

Ares Acres builds DJI Agras parts solutions around real maintenance jobs, so operators spend less time searching for the part they did not know they needed. Free and fast U.S. shipping, same-day dispatch on in-stock kits, from Albuquerque, New Mexico.

---

🧩 What This Kit Does Not Include

A kit is defined as much by its edges as by its contents. The T100 OEM Weight Sensing Service Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T100 parts we stock separately — listed here so the second order does not become a second week of downtime:

• DJI Agras T100 OEM Boom Signal Cable (Front & Rear)
• DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001118) — BC.AG.SS001118
• DJI Agras T100 OEM Aircraft Arm Signal Cable (Front) (YC.XC.XX001468) — YC.XC.XX001468
• DJI Agras T100 OEM Aircraft Arm Signal Cable (Rear) (YC.XC.XX001469) — YC.XC.XX001469
• DJI Agras T100 OEM Front Radar Signal Cable (YC.XC.XX001467) — YC.XC.XX001467
• DJI Agras T100 OEM Rear Radar Signal Cable (Short) (YC.XC.XX001523) — YC.XC.XX001523
• DJI Agras T100 OEM Aircraft Arm Lock Position Detection Signal Cable
• DJI Agras T100 OEM Aircraft Arm Propulsion Cable (Front) (YC.XC.DD000812) — YC.XC.DD000812
• DJI Agras T100 OEM Aircraft Arm Propulsion Cable (Rear) (YC.XC.DD000813) — YC.XC.DD000813
• DJI Agras T100 OEM Cable Distribution Board Module (BC.AG.SS001091) — BC.AG.SS001091

None of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras T100 OEM Weight Sensing Service Kit

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Compatible aircraft: DJI Agras T100

Component count: 3

Contains: DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01); material number BC.AG.SS001067

Contains: DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119); material number BC.AG.SS001119; installed at Aircraft rear spreading-system weighing assembly

Contains: DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402); material number YC.XC.XX001402; installed at The weight sensing system

Material numbers in this kit: BC.AG.SS001067; BC.AG.SS001119; YC.XC.XX001402

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 repair kit

Agras T100 parts USA

T100 OEM Weight Sensing Service Kit

DJI Agras T100 OEM Weight Sensing Service Kit

T100 OEM Weight Sensing Service Kit OEM

T100 OEM Weight Sensing Service Kit for sale

DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01)

BC.AG.SS001067

DJI BC.AG.SS001067

DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119)

BC.AG.SS001119

DJI BC.AG.SS001119

DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402)

YC.XC.XX001402

DJI YC.XC.XX001402

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Are the individual parts still available?
Yes. Every component remains listed separately and always will be.

Is this an official DJI boxed kit?
No. It is an Ares Acres curated kit built from genuine OEM components, packed and shipped by us.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 3 component lines.

What is the DJI part number for the DJI Agras T100 OEM Front Weight Sensor Module (BC.AG.SS001067.01) in this kit? BC.AG.SS001067. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 / T70P Front Weight Sensor Module? It is the OEM sensor mounted at the front payload / frame load point of the DJI Agras T100 and T70P, measuring real-time payload weight distribution and feeding that data to the flight controller for center-of-gravity calculations and takeoff, hover, and landing logic. Its DJI part number is BC.AG.SS001067.01.

Why does the aircraft restrict flight or show payload warnings when the tank is loaded correctly? Because payload sensing is a flight-control input, not bookkeeping. The controller uses front load data for balance and safety logic, so a sensor that drifts or misreads can trigger payload mismatch warnings and flight restrictions even when the actual loading is correct — a listed replacement indicator for this module.

What is the DJI part number for the DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) in this kit? BC.AG.SS001119. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 / T70P Rear Weight Sensor Module, and what is its DJI part number? It is the OEM load-monitoring sensor in the rear spreading-system weighing assembly of the DJI Agras T100 and T70P. It continuously measures the material remaining in the spreader and supplies that weight data to the aircraft's intelligent spreading functions. Its official DJI material number is BC.AG.SS001119. Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, stocks it in brand new condition, one sensor module per order.

Which DJI Agras models does it fit, and where does it install? Its listed compatibility is the DJI Agras T100 and the DJI Agras T70P, and it installs in the aircraft's rear spreading-system weighing assembly as a direct-fit OEM replacement. Match material number BC.AG.SS001119 to your parts diagram or to the label on the original part to confirm exact fitment before ordering.

Where does the DJI Agras T100 OEM Rear Weight Sensor Module (BC.AG.SS001119) go and what does it do? It installs at the aircraft rear spreading-system weighing assembly, where it measures payload weight while supporting intelligent spreading operations.

What is the DJI part number for the DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402) in this kit? YC.XC.XX001402. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras T100 Weight Sensor Signal Cable? It is the OEM weight sensor signal cable serving the weight sensing system of the DJI Agras T100. It is the genuine DJI Agras component for this position, supplied new.

What is the DJI material number (part number) for the Weight Sensor Signal Cable? The DJI material number is YC.XC.XX001402, listed on the official DJI Agras T100 parts breakdown. Labels sometimes carry a revision suffix such as .01 or .F — that is the same part; match the base number.

Where does the DJI Agras T100 OEM Weight Sensor Signal Cable (YC.XC.XX001402) go and what does it do? It installs at the the weight sensing system, where it weighing the payload in real time so the aircraft knows exactly what it is carrying.

Which aircraft does this kit cover? DJI Agras T100. Confirm the component variant against your aircraft's parts diagram before installation.

---