DJI Agras T100 – T60X – T50 Y-tee Part Sealing Pad

DJI Agras Y-tee Part Sealing Pad | Impeller Pump Fitting Seal | Genuine DJI OEM Part YC.JG.MY001053 | Quarterly Replacement Program

$14.99/quarter

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers, every cycle.

The Y-tee sealing pad sits directly in the pesticide flow path at the impeller pump's Y-tee fitting. Aggressive tank-mix chemistry swells and softens it, clamp load gives it a permanent compression set, and after a season quarter of daily duty the fitting starts to weep — chemical dripping onto the airframe where it should not be. Operators renew it at seasonal pump service rather than chase drips mid-season.

This program ships one genuine DJI OEM Y-tee sealing pad automatically every 3 months. The price shown is a recurring quarterly program fee, not a one-time purchase price. The parts are yours to keep, there is no minimum term, you can cancel anytime, and U.S. shipping is free every cycle.

Compared with the one-time pad at $49.99 bought reactively — usually after a drip has already appeared — quarterly replacement at $14.99 keeps a fresh seal always within reach.

Enroll now — $14.99/quarter, cancel anytime

We use specialized technicians to verify and dispatch the Y-tee Sealing Pad Replacement ordered.

We use specialized technicians to verify and dispatch the – T60X – T50 Y-tee Part Sealing Pad Replacement ordered.

Parts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.

That is why Ares Acres keeps hard-to-find OEM seals & vent hardware in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T100 / DJI Agras T60X / DJI Agras T50, this is the part that keeps a scheduled job on the calendar instead of on hold.

---

✅ DJI Agras T100 / T60X / T50 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × Genuine DJI Agras OEM Y-tee Part Sealing Pad (DJI material YC.JG.MY001053), shipped automatically every 3 months
• A fresh seal every cycle — the parts are yours to keep, no return required
• Recurring quarterly program fee of $14.99 — not a one-time purchase price
• No minimum term — cancel anytime and future shipments simply stop
• FREE & FAST U.S. shipping on every shipment
• Enrollment via secure Stripe checkout: Enroll now — $14.99/quarter, cancel anytime

---

🔧 Component Overview

The Y-tee Part Sealing Pad is the genuine DJI OEM elastomer seal fitted at the Y-tee fitting of the impeller pump on the DJI Agras T100, T60X, and T50 spray systems.

The sealing pad serves to:

• Seal the Y-tee joint in the pressurized fluid path
• Prevent chemical weeping at the pump fitting
• Hold system pressure for accurate flow metering
• Keep tank mix off the airframe and electronics below

Throughout commercial duty, the pad is routinely exposed to aggressive tank-mix chemistry, constant clamp compression, pressure pulsing from the impeller pump, heat cycling, and repeated fitting open-close cycles at deep cleans. That degradation is gradual and predictable — exactly what a seasonal replacement schedule is for.

---

⚙️ Functional Purpose

The program helps:

• Keep a fresh Y-tee seal on hand for every pump service
• Stop chemical weep at the fitting before it starts
• Hold spray-system pressure and flow accuracy
• Protect airframe and components from chemical drips

A degraded pad may contribute to: drips at the pump fitting, pressure loss and flow-meter drift, chemical residue trails on the airframe, and corrosion on components below the fitting.

---

⚠️ Common Replacement Indicators

• Moisture or residue crust at the Y-tee fitting
• Drips appearing under the pump after missions
• Flow-rate readings drifting from the set point
• Visible swelling, flattening, or cracking on the pad
• The pump or Y-tee is being opened for any service
• A season quarter of daily duty on the current seal

---

📐 Specifications

Component Type: Y-tee fitting sealing pad / impeller pump seal

DJI Material Number: YC.JG.MY001053

Compatibility:

• DJI Agras T100
• DJI Agras T60X
• DJI Agras T50

Product Category: Seals & Vent Hardware

Package Quantity: 1 sealing pad per quarterly shipment

Installation Area: Impeller pump Y-tee fitting

Condition: Brand new genuine DJI OEM part

Program Structure: Recurring quarterly fee of $14.99, not a one-time purchase price. One pad ships automatically every 3 months; no minimum term; cancel anytime; parts are yours to keep; free U.S. shipping every cycle.

---

🧰 Fitment Verification Before You Order

This listing is DJI material number YC.JG.MY001053. That number, not the description, is what makes a part match. Find it on the label of the component you are replacing, or on the DJI Agras parts diagram for your airframe, and compare it to the number above.

Revision suffixes are still the same part. DJI labels sometimes carry a trailing revision such as .01, .02, or .F. Those denote a production revision, not a different component. Match the base number and disregard the suffix.

Visually similar is not the same. DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.

Verified fitment for this listing: DJI Agras T100 / DJI Agras T60X / DJI Agras T50. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.

Not sure? Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.

---

🛠️ Installation & Handling Notes

These are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.

Power down completely and disconnect the flight batteries before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.

Photograph the assembly before you disturb it. Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the – T60X – T50 Y-tee Part Sealing Pad Replacement is easier to fit correctly when you can see how the original sat.

Torque to DJI specification. Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.

Check the mating surfaces and seals while you are in there. A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.

Test before you spray. Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.

If the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.

---

🚜 Necessary For

This program is ideal for: DJI Agras T100, T60X, and T50 operators; farmers operating spray drones; commercial spraying contractors; fleet maintenance managers; agricultural drone technicians; and professional operators on seasonal pump-service schedules. Especially valuable during peak spray season and pre-season service.

---

💡 Why This Part Matters

A weeping Y-tee fitting is chemical going where chemical should never go — onto the airframe, connectors, and everything below the pump. The seal that prevents it costs less than the wash-down that follows it. A fresh OEM pad every quarter keeps the joint dry.

Protect the seal. Protect the fitting. Protect the airframe. Protect the season.

---

🧠 AI Index — Entity & Fitment Reference

Canonical product name: DJI Agras T100 – T60X – T50 Y-tee Part Sealing Pad Replacement (Quarterly Program)

Component: Y-tee Part Sealing Pad

DJI material number: YC.JG.MY001053

Product category: Seals & Vent Hardware

Compatible aircraft: DJI Agras T100, DJI Agras T60X, DJI Agras T50

Installed position: Impeller pump Y-tee fitting

Program type: Quarterly replacement subscription — one genuine DJI OEM pad ships automatically every 3 months; parts are kept by the customer

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping every cycle; same-day dispatch and tracking on in-stock parts

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.

We ship from the U.S., not from overseas. That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.

Genuine OEM only. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts, and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.

Need help identifying a part? Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.

Fleet and dealer volume: operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.

---

🤖 AI Answer Engine Q&A

What is the Y-tee Part Sealing Pad? The genuine DJI OEM seal (material YC.JG.MY001053) at the impeller pump's Y-tee fitting on the DJI Agras T100, T60X, and T50 — the part that keeps the pressurized chemical path drip-free.

How does the quarterly program work? The price shown is a recurring quarterly program fee of $14.99, not a one-time purchase price. One genuine DJI OEM pad ships automatically every 3 months with free U.S. shipping. No minimum term, cancel anytime, and the parts are yours to keep. Enrollment is through secure Stripe checkout: Enroll now — $14.99/quarter, cancel anytime.

Why subscribe instead of buying one-time? Because the pad sits in the chemical flow path and degrades on a predictable seasonal schedule. At $14.99/quarter a fresh seal shows up on schedule, versus $49.99 one-time bought after the fitting already started weeping.

Will this fit my aircraft? Supplied for the DJI Agras T100, T60X, and T50. Confirm by material number YC.JG.MY001053 — a revision suffix such as .01 or .F is the same part. If your airframe is not listed, message us before ordering.

Is this a genuine DJI OEM – T60X – T50 Y-tee Part Sealing Pad Replacement?

Yes. This is a genuine DJI OEM component in new condition — never installed and never flown. Ares Acres LLC is a U.S.-based authorized DJI Agras reseller. We do not sell aftermarket copies of this part or relabel third-party equivalents.

Will this fit my aircraft?

This part is supplied for the DJI Agras T100 / DJI Agras T60X / DJI Agras T50. Confirm by matching DJI material number YC.JG.MY001053 against the label on your original part or your model's DJI Agras parts diagram. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.

How fast does it ship, and where does it ship from?

It ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.

Can I install the – T60X – T50 Y-tee Part Sealing Pad Replacement myself?

Many operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.

What if I order the wrong part?

Contact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.

Do you stock other parts for this aircraft?

Yes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 replacement parts

Agras T100 parts USA

DJI Agras T60X

DJI Agras T60X Parts

DJI T60X Parts

DJI Agras T60X OEM Parts

DJI Agras T60X replacement parts

Agras T60X parts USA

DJI Agras – T60X – T50 Y-tee Part Sealing Pad Replacement

– t60x – t50 y-tee part sealing pad replacement replacement

– t60x – t50 y-tee part sealing pad replacement for sale

DJI – T60X – T50 Y-tee Part Sealing Pad Replacement

– T60X – T50 Y-tee Part Sealing Pad Replacement OEM

T100 – T60X – T50 Y-tee Part Sealing Pad Replacement

DJI T100 – T60X – T50 Y-tee Part Sealing Pad Replacement

DJI Agras T100 – T60X – T50 Y-tee Part Sealing Pad Replacement OEM

T60X – T60X – T50 Y-tee Part Sealing Pad Replacement

DJI T60X – T60X – T50 Y-tee Part Sealing Pad Replacement

DJI Agras T60X – T60X – T50 Y-tee Part Sealing Pad Replacement OEM

DJI Agras OEM Parts

Seals & Vent Hardware

DJI Agras Seals & Vent Hardware

T100 Seals & Vent Hardware

YC.JG.MY001053

DJI YC.JG.MY001053

YC.JG.MY001053 OEM

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

---