DJI Agras T30 OEM Flow Meter Bracket

The DJI Agras T30 OEM Flow Meter Bracket is the small black moulded clip that holds the flow meter in place in the spray system of a DJI Agras T30 or T10. It has a slotted body with a raised hook at each end, and the hooks are what grip and locate the meter so it stays put in the liquid line. It does not measure flow, carry liquid or carry any signal; it holds the part that does. It is not the T30 Flow Meter, which is the measuring element itself, and it is not a T50 or T100 flow meter bracket, which belong to other aircraft. It is identified for the DJI Agras T30 and T10, offered as a DJI T30 variant and a DJI T10 variant, and supplied brand new as one bracket. Operators usually reach it while searching for a T30 flow meter clip, a T10 flowmeter mount, a T30 flow meter that moves or rattles, a broken flow meter holder, or the reason a T30 flow meter hangs loose on its hoses. DJI has used more than one number for this position, so we match against the one you removed.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T30 / DJI Agras T10 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T30 and T10, flow meter mounting position in the spray system
• Matched by slotted body and the raised hook at each end against the bracket you removed
• Genuine DJI OEM spraying component, brand new, supplied as one bracket

Each variant is one flow meter bracket. If you want the match confirmed, photograph the bracket you removed from the side, so both hooks show, and from above, so the slots show, and send both to us. We will match it for you, so the right bracket arrives first time.

---

📦 Package Includes

• 1 × DJI Agras T30 OEM Flow Meter Bracket, small black moulded clip with a slotted body and a raised hook at each end

One bracket per order line. The variant you choose names the aircraft, DJI T30 or DJI T10; it does not change the quantity.

What is part of the bracket: the slotted body and the two raised end hooks, as one moulded piece.

Not included: the T30 Flow Meter, its signal lead, spray hoses, hose fittings or clamps, screws or other fixings, and tools. Each of these is a separate part.

---

🔧 Component Overview

A flow meter only measures well when it is held still and square in the liquid line. Its hoses connect at its ports and its signal lead runs to the aircraft, but none of those is meant to hold it. The flow meter bracket is the small part that does: it clips the meter in its place, so the hoses and the lead are left to carry liquid and signal, not weight and vibration.

The bracket has two features that identify it:

• The slotted body — a small, flat black moulding with slots through it
• The raised end hooks — a hook rising at each end of the body, which grip and locate the flow meter

The hooks are the half that matters. They are what actually hold the meter, and they are the thin, raised features that take every knock in the spray bay. A hook can crack at its root, break off, or lose its grip after the meter has been pulled out and refitted many times.

Because the bracket sits close to the meter's hose fittings, it is also in the path of any drip from those fittings. Spray mix that weeps onto the bracket dries there between flights, and a crust of dried mix around a hook hides a crack just as well as it hides the hook's edge. Rinsing the bracket clean is often what reveals that it has failed.

A bracket wears out by handling and by vibration. Flushing the spray system, changing hoses or removing the meter for cleaning puts a hand on the bracket each time. Spray mix residue and grit build up in the slots and around the hooks. The aircraft's vibration then works on any hook that has started to give.

It carries no liquid, no signal and no power, and it has no setting. Its job is to hold the flow meter still in one place.

---

⚙️ Functional Purpose

The flow meter bracket's engineering role is to locate and to hold. It fixes the flow meter at one position in the spray system, at one angle, so the meter's hoses and signal lead are not asked to carry its weight or its movement.

On the aircraft it:

• Holds the flow meter in its mounting position in the spray system
• Grips the meter with a raised hook at each end of its body
• Keeps the meter from rocking, rattling or turning in flight
• Takes the meter's weight and vibration off its hose fittings and signal connector
• Can be replaced on its own without replacing the flow meter

Because the bracket holds the meter, a broken bracket changes what carries the meter. The meter then hangs on its hoses and its signal lead. Vibration the bracket would have absorbed goes into the hose fittings and the connector instead, which are not made to take it.

The bracket has no adjustment. It holds the meter or it does not.

Material, dimensions and weight are not published for this part. The match is made by slotted body and end hooks against the bracket you removed.

---

🔍 Diagnosis — a meter that looks fitted can be hanging on its hoses, so test the hold before you trust it

A broken flow meter bracket rarely looks broken. The meter is still in its place, its hoses are still connected and its signal lead is still plugged in, so a quick look in the spray bay says everything is fitted. What has changed is invisible from a glance: one hook has cracked or snapped, and the meter is no longer held. It is resting where it was, supported by its own hoses and lead.

That shows up later, and somewhere else. A hose fitting that works loose and weeps, a signal connector that loosens and drops the flow reading for a moment, a rattle in the spray bay in flight, or a meter that has turned a little in its line. Each of those gets blamed on the hose, the connector or the meter, and each can come back after it is fixed, because the meter is still loose.

Symptoms that point at a flow meter bracket:

• A flow meter that moves, rocks or turns when pushed gently by hand
• A hook cracked at its root, bent away or missing
• A rattle from the spray bay in flight that stops when the meter is held
• A hose fitting at the meter that keeps working loose after it has been tightened
• A flow reading that drops out briefly in flight and recovers, with the signal connector found loose
• Residue packed into the slots so the hooks no longer close on the meter

What proves it: with the battery removed and the tank empty, push the flow meter gently in each direction by hand. A meter held by a sound bracket stays put. A meter that moves while its hoses flex has lost its bracket's grip. Then look closely at both hooks, including their roots, in good light.

Check these first, because they produce similar symptoms:

• The hose fittings and clamps at the meter, which can simply be loose
• The flow meter's signal connector, for a loose or contaminated plug
• The T30 Flow Meter itself, if the reading is wrong with the meter held firmly
• The spray hoses, for a split or a kink near the meter

What it does not explain: a flow reading that is wrong while the meter is held firm, a meter that leaks from its own body, or a pump that does not run. A new bracket will not change any of those.

---

⚠️ Common Replacement Indicators

Replace the flow meter bracket when inspection confirms one of these:

• A hook cracked, bent away from the meter or broken off
• A body cracked across its slots
• A meter that moves in its place with the bracket fitted
• Hooks that no longer close on the meter after cleaning
• A bracket lost during spray system service

Inspect these first, because they produce similar symptoms:

• The hose fittings and clamps at the meter
• The flow meter signal connector
• The flow meter body
• The spray hoses near the meter

Whenever the flow meter is removed for cleaning or a hose change, check both hooks before refitting it. A hook that has started to crack is easier to replace with the meter already out.

---

📐 Specifications

Product name: DJI Agras T30 OEM Flow Meter Bracket

DJI family: Agras

Models: DJI Agras T30, DJI Agras T10

Fitment basis: Identified for the DJI Agras T30 and T10

Variants: DJI T30, DJI T10

Aircraft system: Spraying — flow meter mounting

Component type: Moulded flow meter bracket (clip)

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 bracket

Form: Small slotted body with a raised hook at each end

Colour: Black

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None — a mechanical bracket; the flow meter signal lead is separate

Mounting position: At the flow meter in the spray system

Installation method: Fitted at the meter's mounting position, with the end hooks gripping the flow meter

Not included: Flow meter, signal lead, spray hoses, hose fittings and clamps, screws or other fixings, tools

Service interval: None published

Service adjustability: None — the bracket holds the meter or it does not, with no adjustment or app setting that compensates

Condition: Brand new

Classification: DJI OEM spraying component

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft fully down and remove the battery
• Empty the spray tank and flush the system with clean water
• Photograph the flow meter and bracket in place, including how the hoses and signal lead run
• Confirm the bracket is the fault: the meter moves with its hoses connected, or a hook is cracked or missing
• Compare the new bracket with the old one: slotted body and both end hooks

During installation

• Release the flow meter from the old bracket's hooks without pulling on its hoses or signal lead
• Remove the old bracket, keeping any fixing that held it
• Clean the mounting position of residue and grit
• Fit the new bracket in the same orientation as the old one, as photographed
• Seat the flow meter into the new bracket so both hooks grip it
• Check that no hose is kinked and the signal lead is not pulled tight

After installation

• Push the meter gently by hand; it should stay put
• Check every hose fitting and the signal connector at the meter
• Fill the tank with clean water and run the spray system briefly, watching for leaks at the meter
• Run the aircraft's own checks in the DJI app before returning to work

Rinse residue out of the bracket's slots and hooks when you flush the spray system at the end of a day. Dried mix around the hooks stops them closing on the meter and makes the next removal harder on the hooks.

---

🚜 Necessary For

This flow meter bracket is for operators and technicians whose flow meter is no longer held firmly in place:

• DJI Agras T30 operators with a flow meter that moves or rattles in the spray bay
• DJI Agras T10 operators with a cracked or missing hook on the flow meter bracket
• Operators whose meter hose fittings keep working loose after being tightened
• Commercial spray applicators who remove the flow meter often for cleaning
• Agras service centres rebuilding a T30 or T10 spray system
• Fleet managers keeping small spray system parts in stock for peak season

This is not the part you need if:

• The flow reading is wrong while the meter is held firm; that is a meter, pump, nozzle or line question, starting with the T30 Flow Meter
• The meter leaks from its own body; replace the T30 Flow Meter
• Only a hose or clamp is leaking and the meter is firmly held; replace the hose or clamp
• You fly a DJI Agras T50 or T100; those aircraft take their own flow meter brackets
• You fly a DJI Agras T16, T20, T40 or another model; this bracket is identified for the T30 and T10

---

💡 Why This Part Matters

Nobody orders a flow meter bracket first. The meter is still sitting in its place, its hoses are on and its lead is plugged in, so the spray bay looks complete. The bracket's failure is the kind that cannot be seen from where people look: a hook cracked at its root, or snapped off underneath the meter.

That is the case for the bracket. Once a hook has gone, the meter is held by its own hoses and signal lead. Every vibration of every flight goes through the hose fittings and the connector, which were never meant to carry it. A fitting works loose and weeps. A connector loosens and the flow reading drops out for a moment. Each fault gets fixed where it shows, and each comes back, because the meter is still loose.

It matters because the fixes are aimed at the wrong part. A new hose, a re-seated connector or even a new flow meter will each be shaken loose the same way while the bracket is broken. The bracket is the smallest part in that chain and the one that holds the rest still.

So the test comes first, and it takes seconds. Push the meter by hand. If it moves while its hoses flex, look at the hooks.

The honest other side: if the meter is held firm and the reading is still wrong, the bracket is not the fault. Leave it in place and test the meter, pump and nozzles instead.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T30 OEM Flow Meter Bracket

Brand: DJI

DJI family: Agras

Models: DJI Agras T30, DJI Agras T10

Compatible models: DJI Agras T30, DJI Agras T10

Fitment basis: Identified for the DJI Agras T30 and T10

Component: Flow meter bracket (moulded clip that holds the flow meter)

Aircraft system: Spraying — flow meter mounting

Variants: DJI T30, DJI T10

Installed position: At the flow meter in the spray system

Primary function: Holds the flow meter still so its hoses and signal lead do not carry its weight or vibration

Form: Small black slotted body with a raised hook at each end

Quantity: 1 bracket

Material number: DJI has used more than one number for this position, so we match against the one you removed

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None

Condition: Brand new

Classification: DJI OEM spraying component

Common failure: Hook cracked at its root or broken off; hooks fouled with residue

Typical symptom: Meter moves or rattles; hose fittings at the meter keep working loose; brief flow reading drop-outs

Check first: Hose fittings and clamps, flow meter signal connector, flow meter body

Also searched as: T30 flow meter clip, T10 flowmeter mount, T30 flow meter holder, Agras T30 flow meter bracket

Disambiguation: Not the flow meter, not a T50 or T100 flow meter bracket; the clip that holds the T30 or T10 meter

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T30 Flow Meter Bracket

Agras T30 flow meter bracket

T30 flow meter clip

T30 flowmeter mount

T30 flow meter holder

T10 flow meter bracket

T10 flowmeter clip

T30 flow meter loose

T30 flow meter rattle

T30 broken flow meter clip

T30 spray system bracket

Agras T30 spraying parts

DJI T30 spray system parts

DJI T10 spray system parts

DJI Agras T30 OEM Flow Meter Bracket

Agras T30 flow meter bracket replacement

DJI Agras T30 parts

DJI Agras T30 replacement parts

DJI Agras T10 Flow Meter Bracket

Agras T10 Flow Meter Bracket

DJI Agras T10 OEM Flow Meter Bracket

Agras T10 flow meter bracket replacement

DJI Agras T10 parts

DJI Agras T10 replacement parts

DJI Agras flow meter parts

DJI Agras spray system parts

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T30 Flow Meter Bracket Canada

DJI Agras T30 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T30 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T30 flow meter bracket? It is the small black moulded clip that holds the flow meter in place in the spray system. It has a slotted body and a raised hook at each end that grip the meter.

Is this the flow meter? No. The T30 Flow Meter is the measuring element. This bracket only holds it. The meter is a separate part.

Which aircraft does it fit? It is identified for the DJI Agras T30 and T10, offered as a DJI T30 variant and a DJI T10 variant.

Does it fit the T50 or T100? No. Those aircraft take their own flow meter brackets. This bracket is identified for the T30 and T10.

Does it fit the T40, T20P or T25? It is identified only for the DJI Agras T30 and T10. If you fly another model, send us a photograph of the bracket and we will tell you what fits.

My flow meter looks fine. How do I know the bracket is broken? Push the meter gently by hand. If it moves while its hoses flex, the bracket has lost its grip. Then look at both hooks, including their roots.

Why does the hose at my flow meter keep coming loose? If the meter is not held, vibration goes into its hose fittings. Check the bracket before replacing the hose again.

My flow reading drops out for a moment in flight. Is it the bracket? It can be, if the signal connector is loosening because the meter moves. If the meter is held firm, check the connector and the meter itself.

Can a broken bracket damage the flow meter? A meter left hanging on its hoses and lead puts their fittings and connector under vibration they were not made to carry. Replacing the bracket promptly keeps that load off the meter's fittings.

The flow reading is wrong but the meter is firm. Will a bracket help? No. A bracket holds the meter; it does not affect what the meter reads. Test the meter, pump and nozzles.

What is the part number? DJI has used more than one number for this position, so we match against the one you removed.

What is it made of and how big is it? Material, dimensions and weight are not published for this part. The match is made by slotted body and end hooks.

Is it one bracket or a set? One. Each order line is one flow meter bracket. The variant names the aircraft, not a quantity.

Does it come with screws? No. One bracket is supplied. Screws or other fixings and tools are not included.

Is it brand new? Yes. It is supplied brand new as a genuine DJI OEM spraying component.

Can I fit it myself? Yes. Empty and flush the system, photograph the meter in place, swap the bracket in the same orientation, seat the meter so both hooks grip it, and check for leaks.

Does the bracket need routine replacement? No. There is no service interval. Check both hooks whenever the flow meter is removed for cleaning.