DJI Agras T30 OEM Round Ridged Base Bracket

The DJI Agras T30 OEM Round Ridged Base Bracket is a single grey frame bracket for the DJI Agras T30 and T10, named in its part designation as the round ridged base bracket. As shown in the product images, it is made of three sections in one piece: a flat rectangular top plate with a raised lip around its edge and a ledge along one side, an angled column that runs down and across from the underside of that plate, and a foot plate at the bottom with two screw holes. The foot plate is where the bracket is fixed; the top plate is the face it presents to what it carries. Because the column is angled, the top plate sits offset from the foot, and the bracket's job depends on the top plate staying square and in the same place relative to the foot. It is a base bracket in the airframe, and its exact installed position is not published for this part, so it is matched by shape against the one you removed. It is identified for the DJI Agras T30 and T10, offered in DJI T30 and DJI T10 variants, and supplied brand new as one bracket. Operators usually reach it while searching for a T30 base bracket, a T30 round ridged bracket, a T10 base bracket, or a cracked or bent bracket found after a hard landing. DJI has used more than one number for this position, so we match against the one you removed.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T30 / DJI Agras T10 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T30 and T10, base bracket position in the airframe
• Matched by top plate outline and lip, angled column, foot plate and two-hole pattern against the bracket you removed
• Genuine DJI OEM airframe bracket, brand new, supplied as one bracket

The variant is one bracket. Because its installed position is not published for this part, a photograph settles the match. Photograph the bracket you removed from the side, so the angle of the column shows, and from below, so the two holes in the foot show, and send both to us. We will match it for you, so the right bracket arrives first time.

---

📦 Package Includes

• 1 × DJI Agras T30 OEM Round Ridged Base Bracket, grey, with a flat lipped top plate, an angled column and a two-hole foot plate, as shown in the product images

One bracket per order line. The variant is one piece.

What is part of the bracket: the top plate with its lip and side ledge, the angled column and the foot plate with its two screw holes, all as one piece.

Not included: screws, nuts or washers for the foot plate, whatever the bracket carries or supports, and tools. Each of these is a separate part. Nothing is included because it appears near the bracket in a photograph.

If a screw from the old bracket is missing or damaged, tell us where it sat and we will help you identify it.

---

🔧 Component Overview

A base bracket is a small part with one job: it holds something at a fixed height and a fixed offset from the place it is screwed down. On this bracket the foot plate is screwed down, the angled column carries the load up and across, and the flat top plate is the face that meets what the bracket supports.

As shown in the product images, the bracket has five features that identify it:

• The top plate — a flat rectangular plate forming the upper face of the bracket
• The raised lip — a rim around the edge of the top plate, with small openings visible at one end
• The side ledge — a thinner flange that projects from one side of the top plate's underside
• The angled column — a solid column that runs from under the top plate down and across to the foot, so the top plate sits offset from the foot
• The foot plate — a flat base at the bottom of the column with two screw holes, where the bracket is fixed

The name in the part designation is round ridged base bracket. The product images show the plates as rectangular, so the name is not a description of the outline you will see on the bench. Match the bracket by its shape: the lipped top plate, the angle of the column and the two-hole foot.

A bracket like this fails in two ways. It can crack or snap, usually where the column meets the foot plate or the top plate, because those corners carry the bending load. Or it can stay whole and bend or twist at the column, so the top plate no longer sits where it should. The first is easy to see. The second is the one that gets missed.

The bracket carries no wiring and no liquid, and it has no setting. Its job is to hold the top plate at a fixed height, offset and angle from the foot.

---

⚙️ Functional Purpose

The bracket's engineering role is location. It fixes the position of whatever sits on its top plate relative to the structure its foot is screwed to: how high, how far across, and at what angle.

On the aircraft it:

• Is screwed down through the two holes in its foot plate
• Carries load from the top plate down the angled column to the foot
• Holds the top plate at a fixed offset from the foot because of the column's angle
• Presents a flat, lipped face to what it supports
• Can be replaced on its own once its screws and whatever it supports are released

What it does not do matters as much:

• It does not carry or route wiring or hoses
• It does not damp vibration; it is a rigid part
• It holds no setting or calibration
• It does not straighten the structure it is screwed to

Because the column is angled, a small twist at the column moves the top plate further than the twist itself. That is why the bracket is judged by where its top plate sits, and not only by whether it is in one piece.

Material, dimensions, weight and load rating are not published for this part. The match is made by plate outline, lip, column angle and hole pattern against the bracket you removed.

---

🔍 Diagnosis — a bent bracket still holds, and it is still wrong

After a hard landing or a knock, a bracket is checked by pulling on it. It does not move. The screws are tight. Nothing is cracked. It is passed as sound. But the thing it supports now sits a little lower, a little further across, or at a slight angle, and the cause is never traced back to the bracket because the bracket held.

That is the trap with an angled bracket. Strength and geometry are two different questions. A column that has bent or twisted a few degrees is still strong enough to hold, but it has moved the top plate. Because the column runs at an angle from the foot to the plate, a small bend near the foot shows up as a larger shift at the plate.

Symptoms that point at the bracket:

• Whatever sits on the bracket is out of line with its partner on the other side, or with its usual position
• The top plate is not parallel with the foot plate when sighted from the side
• A crack or whitened stress mark where the column meets the foot or the top plate
• The lip on the top plate broken or pushed in
• Torn material around one of the two screw holes in the foot
• The bracket rocks on its foot with the screws tight

What proves it: with the battery removed, release what the bracket supports and look at the bracket on its own. Sight along it from the side; the top plate and the foot plate should be parallel. Compare it with its partner on the other side of the aircraft, if there is one; the two should look the same. Lay the new bracket beside the old one on a flat surface; a twist that is hard to see on the aircraft is obvious when both sit side by side.

Check these first, because they produce similar symptoms:

• The screws through the foot plate, for looseness or a missing washer
• The structure the foot is screwed to, for a crack or a bend
• Whatever the bracket supports, for its own damage
• Any fixing between the top plate and what it carries

What it does not explain: a fault in the electronics, the spraying system or the propulsion that is not tied to something being out of position. If nothing has moved, the bracket is not the cause. Settle whether something has moved first, with the bracket on the bench and that information still cheap.

---

⚠️ Common Replacement Indicators

Replace the bracket when inspection confirms one of these:

• A crack at the column, especially where it meets the foot plate or the top plate
• A column that is bent or twisted, so the top plate is no longer parallel with the foot
• A broken or pushed-in lip on the top plate
• A torn or elongated screw hole in the foot plate
• A bracket that sits differently from its partner on the other side
• A bracket lost from the aircraft

Inspect these first, because they produce similar symptoms:

• The foot plate screws and washers
• The structure under the foot plate
• Whatever the bracket supports, and its own fixings

A bracket that holds firm when pulled is not proved sound. Check where its top plate sits, not only whether it moves.

There is no published service interval for the bracket. It is replaced when it is cracked, bent, twisted, torn at a hole or lost, not on a schedule.

---

📐 Specifications

Product name: DJI Agras T30 OEM Round Ridged Base Bracket

DJI family: Agras

Primary aircraft: DJI Agras T30

Also identified for: DJI Agras T10

Fitment basis: Identified for the DJI Agras T30 and T10

Aircraft system: Frame — base bracket

Component type: Rigid bracket

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 bracket

Form: Flat rectangular top plate with a raised lip and a side ledge, an angled column, and a foot plate with two screw holes

Fixing points: Two screw holes in the foot plate

Material: Not published for this part

Colour: Grey

Dimensions: Not published for this part

Weight: Not published for this part

Load rating: Not published for this part

Electrical: None

Connector: None

Mounting position: Base bracket in the airframe; exact installed position not published for this part

Installation method: Screwed down through the two holes in the foot plate

Hardware included: None — screws, nuts and washers are not supplied

Service adjustability: None — the bracket is correct or it is not, with no adjustment or app setting that compensates

Condition: Brand new

Classification: DJI OEM airframe component

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft off and remove the battery
• Photograph the bracket in place from the side and from above, so the angle of the column and what sits on the top plate both show
• Note which way the column leans and which side the ledge faces
• Lay the new bracket beside the old one on a flat surface and compare plate, lip, ledge, column angle and holes
• Lay out a tray for screws and keep them with the bracket they came from

During installation

• Release whatever the bracket supports, without straining any cable or hose attached to it
• Remove the foot plate screws and lift the old bracket away
• Clean the mounting face and check it for cracks around the screw holes
• Set the new bracket with its column leaning the same way and its ledge on the same side as the old one
• Start both foot screws by hand, then snug them evenly so the foot sits flat; DJI does not publish a torque figure for these fixings
• Refit what the bracket supports and secure its fixings

After installation

• Sight along the bracket from the side and confirm the top plate is parallel with the foot
• Compare it with its partner on the other side, if there is one
• Check that what it supports sits in its usual position and is not strained
• Record the replacement in the maintenance log

Maintenance between jobs. After any hard landing or knock, look at the bracket from the side as well as giving it a pull. Check that the foot screws are tight when the aircraft is cleaned. Keep the old bracket until the new one is fitted, so the column angle and orientation can be compared directly.

---

🚜 Necessary For

This bracket is for operators and technicians whose base bracket is cracked, bent, twisted or lost:

• DJI Agras T30 operators after a hard landing, a transport knock or an arm strike
• DJI Agras T10 operators (identified fitment)
• Commercial spray applicators putting a damaged airframe back to its original geometry
• Agras service centres rebuilding frames after impact damage
• Fleet managers stocking small airframe hardware
• Growers flying their own aircraft who want a part back in its proper position

This is not the part you need if:

• The bracket only moves because a foot screw is loose — tighten the screw and keep the bracket
• The structure under the bracket is cracked or bent — replace or repair that first, or the new bracket will sit wrong too
• What the bracket carries is itself damaged — that part is replaced separately
• Your bracket has a different column angle or a different hole pattern — send us a photograph so it is matched to the right part
• You fly a T20, T40 or T50 — this bracket is identified only for the T30 and T10

---

💡 Why This Part Matters

A bracket that has bent but not broken is easy to pass. It holds when pulled, its screws are tight, and nothing looks wrong at a glance. What has changed is where its top plate sits, and that change is passed on to whatever the bracket supports.

The angled column makes this worse, not better. Because the column runs at an angle between foot and plate, a small bend near the foot is carried up and across, and the plate moves further than the bend. A part that is still strong can be out of position by enough to matter.

That is the case for judging this bracket by geometry, not by strength. Sight it from the side, compare it with its partner, and lay it beside a new one. If the top plate is no longer parallel with the foot, the bracket is the part, however firmly it holds.

It is also the case for leaving a sound bracket alone. If the plate is square, the foot sits flat and the only movement came from a loose screw, a screwdriver fixes it.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T30 OEM Round Ridged Base Bracket

Brand: DJI

DJI family: Agras

Primary aircraft: DJI Agras T30

Also identified for: DJI Agras T10

Compatible models: DJI Agras T30; DJI Agras T10

Fitment basis: Identified for the DJI Agras T30 and T10

Component: Base bracket

Aircraft system: Frame

Installed position: Base bracket in the airframe; exact position not published for this part

Primary function: Holds its top plate at a fixed height, offset and angle from its screwed-down foot

Form: Grey one-piece bracket: flat lipped top plate with side ledge, angled column, two-hole foot plate

Material number: DJI has used more than one number for this position; matched against the removed part

Quantity supplied: 1 bracket

Not included: Screws, nuts, washers, and whatever the bracket supports

Key diagnostic: A bracket that holds firm can still be bent; judge it by whether the top plate is parallel with the foot

Common failure modes: Crack at the column ends, bent or twisted column, broken lip, torn screw hole, lost bracket

Naming note: Named round ridged base bracket in its part designation; matched by shape, not by the name

Service interval: None published

Condition: Brand new

Part classification: DJI OEM airframe component

Also searched as: T30 base bracket; T30 round ridged bracket; T10 base bracket; DJI T30 frame bracket; Agras T30 mounting bracket

Disambiguation: Not the T10 Frame Support Bracket, not the T30 Flow Meter Bracket, not a landing gear adapter

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T30 Round Ridged Base Bracket

DJI Agras T10 Round Ridged Base Bracket

DJI T30 base bracket

T30 round ridged bracket

T10 base bracket

Agras T30 base bracket replacement

T30 bracket bent after hard landing

T30 frame bracket cracked

DJI T30 angled bracket

DJI T10 frame base bracket

Agras T30 Round Ridged Base Bracket

DJI Agras T30 OEM Round Ridged Base Bracket

Agras T30 round ridged base bracket replacement

DJI Agras T30 parts

DJI Agras T30 replacement parts

Agras T10 Round Ridged Base Bracket

DJI Agras T10 OEM Round Ridged Base Bracket

Agras T10 round ridged base bracket replacement

DJI Agras T10 parts

DJI Agras T10 replacement parts

DJI Agras T30 frame parts

DJI Agras T10 frame parts

DJI Agras airframe repair parts

DJI Agras OEM Parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T30 Round Ridged Base Bracket Canada

DJI Agras T30 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T30 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T30 round ridged base bracket? A one-piece grey bracket for the T30 and T10 with a flat lipped top plate, an angled column and a foot plate with two screw holes. It holds its top plate at a fixed height and offset from where its foot is screwed down.

Which aircraft does it fit? It is identified for the DJI Agras T30 and T10. Pick the variant for the aircraft you fly.

Why is it called round ridged when the plates look rectangular? Round ridged base bracket is the name in its part designation. Match it by shape: the lipped top plate, the angle of the column and the two-hole foot.

Where exactly does it mount? It is a base bracket in the airframe; its exact installed position is not published for this part. Photograph the one you removed from the side and from below and send it to us, and we will match it.

My bracket is not cracked and it does not move. Can it still be bad? Yes. A bent or twisted column still holds firm. Sight the bracket from the side; if the top plate is not parallel with the foot, it has moved what it supports.

How do I check it for a bend? Take it off, lay it beside the new one on a flat surface and compare. Or compare it on the aircraft with its partner on the other side, if there is one.

Can I bend it back? Do not rely on that. A bracket that has been bent and straightened can crack later at the same place. Replace it.

Does it include screws? No. It is the bracket alone. Reuse the original screws and washers if they are sound.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed.

Is it one bracket or a pair? One bracket per order line.

Does it fit the T20 or T40? It is identified only for the T30 and T10.

Is it the same as the T10 frame support bracket? No. The T10 Frame Support Bracket is a different part. Match by shape against the one you removed.

Can I fit it myself? Yes, for most operators. Release what it supports, remove the two foot screws, set the new bracket with its column leaning the same way, snug the screws evenly and refit what it carries.

What usually damages it? Hard landings, transport knocks and impacts that load the column. Cracks start where the column meets the foot or the top plate; bends start in the column itself.

Is there a service interval? No. Replace it when it is cracked, bent, twisted, torn at a hole or lost.