DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs)

The DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs) is a pack of eight black moulded nozzle holders from the spray system of the DJI Agras T30 and T10. Each holder is a small, open, rounded-rectangular frame: one long side is thicker and carries a raised, curved shoulder, the opposite side carries a small step at its centre, and the edge of the frame shows a layered, stepped profile. As its name says, it is the holder that seats a spray nozzle at its position on the aircraft; it is not a nozzle, not a nozzle tip, not a seal and not a connector nut. It is identified for the DJI Agras T30 and T10. Operators usually reach it while searching for a T30 nozzle holder, a T10 nozzle retainer, a cracked T30 nozzle frame, a spare set of T30 nozzle holders for the field kit, or the reason one T30 nozzle sits loose or crooked on the spray bar. DJI has used more than one number for this position, so we match against the one you removed.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras retailer supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T30 / DJI Agras T10 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Agras T30 and T10, spray nozzle holder position on the spray system
• Matched by frame outline, raised shoulder, centre step and stepped edge profile against the holder you removed
• Spray system component, new, supplied as a pack of eight holders in the model you select

Each variant is the same pack of eight holders, ordered under the aircraft you fly. If you want the match confirmed, photograph one of the holders you removed face on and from the side, next to a ruler, and send it to us — we will match it for you.

The name matters less than the shape here. Other Agras aircraft also have a part called a nozzle holder, and on some of them it is a completely different moulding. Lay your old holder beside the product images: a small rounded frame with a raised shoulder is this part.

---

📦 Package Includes

• 8 × Spray Nozzle Holder — black moulded rounded-rectangular frames, each with a raised curved shoulder on one long side and a small step at the centre of the opposite side, as shown in the product images

This is a pack of holders, not nozzles. No nozzles, nozzle tips, filters, seals or connector nuts are included.

Not included: nozzles and nozzle tips, nozzle filters, sealing rings and O-rings, connector nuts, check valves, hoses and hose clamps, the spray bar or lance the nozzles mount to, and any screws or fasteners. Move sound parts across from the old assembly, or replace damaged ones separately.

Nothing is included because it appears near the holder on the aircraft. If a seal, nut or clip broke when the old holder came off, tell us which one and we will help you identify it.

Why eight: a nozzle holder is a small part that is easy to crack, easy to drop in a field and easy to lose during a cleaning session. Eight gives you a full change across the positions you service at one time and spares for the field kit.

---

🔧 Component Overview

The spray nozzle holder is the small frame that seats a nozzle at its position on the T30 or T10 spray system. The nozzle does the spraying. The holder is what keeps the nozzle located, square and in the place the spray system expects it to be.

Its shape, as shown in the product images, has four working features:

• The frame — an open, rounded-rectangular ring with a clear centre, so the part it locates passes through or sits within it
• The shoulder — a thicker, raised and curved section along one long side, the most solid part of the moulding
• The centre step — a small step or notch at the middle of the long side opposite the shoulder
• The stepped edge — the frame is layered, so its edge shows a stepped profile rather than a single flat face

Those features are what make the holder a match. A frame with the right outline but no shoulder, or with the step in a different place, will not seat the same way, even if it looks close in a photograph.

Over a working season a nozzle holder sees:

• Spray mix and chemical residue at the nozzle it seats
• Rinse water at the end of every day
• Vibration from the airframe and pressure pulses from the spray system
• Knocks from crop, stubble and the ground at the low points of the aircraft
• Handling every time a nozzle is removed for cleaning or a tip is changed
• Sun and heat on the trailer between jobs

Holders are replaced for three reasons: the frame cracks, usually at a corner or beside the centre step; the shoulder chips or breaks; or the holder is lost when a nozzle is taken off in the field. The first of those is the one that is easy to miss, because a cracked frame can still look whole until it is flexed.

---

⚙️ Functional Purpose

The spray nozzle holder's engineering role is location. It seats the nozzle at its position and keeps it there, square to the spray system, against vibration and spray pressure.

At its position on the spray system it:

• Seats the nozzle at its position
• Keeps the nozzle square, so it sprays in the direction the spray system expects
• Stops the nozzle turning or shifting under vibration
• Holds that location against pressure pulses from the pump
• Lets the nozzle be removed and refitted for cleaning

What it does not do:

• It does not set the flow rate; the pump and the nozzle tips do that
• It does not atomise or shape the spray; the nozzle does that
• It does not filter the liquid; the nozzle filter and tank filter do that
• It does not seal the joint; the sealing ring does that
• It does not clamp the nozzle body to its fitting; the connector nut does that

Because the holder is a single moulding, it is either whole and at its shape or it is not. There is nothing on it to adjust and no app setting that compensates for a cracked one.

That is the honest case for this part. A holder that is cracked, chipped or missing lets the nozzle sit loose or crooked. A holder that is whole, with a nozzle that weeps, drips or sprays weakly, points to a seal, nut, valve or tip problem, and a new holder will not change it.

---

🔍 Diagnosis — a nozzle that sits loose or crooked is a holder; a nozzle that leaks or sprays badly is something else

When one T30 or T10 nozzle starts misbehaving, the holder is often the last thing anyone looks at, because it is small and sits behind the nozzle. That is fair for most spray faults, which start at the tip, the filter, the seal or the valve. But a nozzle that no longer sits where it should is a different fault, and it usually starts at the holder.

So the diagnosis turns on one question: is the nozzle in the right place and misbehaving, or is it out of place?

Signs the holder is the problem:

• A nozzle that moves, turns or rocks when you touch it, when its neighbours are firm
• A nozzle that sits visibly crooked compared with the nozzles beside it
• A crack in the holder frame, often at a corner or beside the centre step
• A chipped or broken shoulder
• A holder that is missing after a nozzle was removed in the field
• A spray stripe from one position that started after a knock or a cleaning session

Signs the holder is not the problem:

• Weak or uneven spray from a nozzle that sits square and firm — clean or replace the nozzle tip and its filter
• Weeping at the joint between the nozzle and its fitting — a sealing ring or connector nut
• Dripping after shut-off — a check valve or solenoid valve symptom
• The same fault at every position — the pump, the flow meter, the hoses or the mix

A quick check: with the aircraft powered down and the battery out, take hold of each nozzle in turn and try to rock it gently. A firm nozzle with a healthy holder does not move. Then look along the row: every nozzle should point the same way. A nozzle that rocks, or one that points off line from its neighbours, is the position to look at.

Then look at the holder itself. Remove the nozzle, take the holder out and flex it very gently between finger and thumb. A crack that was invisible at rest often opens when the frame is flexed. Check the shoulder and the centre step for chips.

Swap test for a spray fault: move the suspect nozzle to a healthy position. If the fault follows the nozzle, the nozzle is the cause. If it stays at the position, look at the holder, the seal and the hose there.

Do not glue or tape a cracked holder. A repaired frame can look right and still let the nozzle shift as soon as the aircraft vibrates.

---

⚠️ Common Replacement Indicators

Replace the spray nozzle holder when inspection confirms one of these:

• A crack in the frame, at a corner, along a side or beside the centre step
• A chipped or broken shoulder
• A frame that is distorted, so it no longer lies flat
• A holder that lets its nozzle rock or turn while the neighbouring nozzles are firm
• A holder that has been glued, taped or heated
• A holder that is missing

Inspect these first, because they cause spray faults that are blamed on the holder:

• The nozzle tip — wear, blockage or damage
• The nozzle filter
• The sealing ring and connector nut at the nozzle
• The check valve and the solenoid valve on that line
• The hose and clamp feeding that position

There is no published service interval for the nozzle holder. It is replaced when it is cracked, chipped, distorted or missing, not on a schedule. With eight in the pack, the sensible habit is to replace any holder that looks doubtful at the same time as the one that has failed.

---

📐 Specifications

Product name: DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs)

DJI family: Agras

Aircraft: DJI Agras T30 and T10

Fitment basis: Identified for the DJI Agras T30 and T10

Aircraft system: Spraying — nozzle location

Component type: Moulded nozzle holder frame

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 8 holders

Form: Open rounded-rectangular frame; raised curved shoulder on one long side; small step at the centre of the opposite side; stepped edge profile

Material: Not published for this part

Colour: Black

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None

Connector: None

Mounting position: On the spray system at a nozzle position, seating the nozzle

Installation method: Fitted in place of the old holder with the nozzle refitted through it; no published tightening value

Hardware included: None

Service adjustability: None — the holder is whole and at its shape or it is not

Variants: DJI T30 and DJI T10; the same pack of eight under each aircraft name

Classification: Spray system component, new

Every value marked not published is left that way on purpose. Match the holder by its outline, shoulder and centre step, laid beside the one you removed.

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery
• Empty the tank, flush the spray system with clean water and let it drain
• Wear gloves and eye protection; residue collects at the nozzles
• Photograph the nozzle and its holder in place from the front and the side, so the orientation of the shoulder is on record
• Lay a new holder beside the old one and compare the outline, the shoulder and the centre step

During installation

• Remove the nozzle from its position, keeping its tip, filter, sealing ring and nut together
• Take the old holder out without levering against the spray bar or lance
• Fit the new holder the same way round as the old one, with the shoulder on the same side, as shown in your photograph
• Refit the nozzle through the holder and seat it fully; do not force a nozzle that will not seat
• Refit the sealing ring and nut, and reconnect any hose without straining it

After installation

• Rock each nozzle gently by hand; every one should be firm
• Look along the row and check that every nozzle points the same way
• Fill the tank with clean water and run the pump on the ground
• Watch the spray from the repaired position and compare it with its neighbours
• Check for weeping and drips at each nozzle under pressure

Maintenance between jobs. Rinse the nozzles and holders with the rest of the spray system at the end of each day. On the pre-flight walk-around, touch each nozzle; a loose one is felt before it is seen. When nozzles come off for cleaning in the field, keep each holder with its nozzle so none goes missing in the stubble. Keep the spare holders from the pack in the field kit, in a closed bag, away from sun and spray mix.

---

🚜 Necessary For

These holders are for operators and technicians keeping T30 and T10 nozzles seated and square:

• DJI Agras T30 operators replacing a holder that cracked or went missing
• DJI Agras T10 operators chasing a nozzle that rocks or sits crooked at one position
• Commercial spray applicators who strip and clean nozzles daily and lose small parts in the field
• Agras service centres rebuilding spray systems after a hard landing or a season of work
• Fleet managers stocking spare holders across several T30 and T10 aircraft

This is not the part you need if:

• The nozzle sits square and firm but sprays weakly or unevenly — clean or replace the nozzle tip and filter
• The nozzle weeps at its joint — check the sealing ring and connector nut first
• The aircraft drips after shut-off — that is a check valve or solenoid valve
• The spray bar or lance itself is cracked or bent — replace that part
• You fly a T16 — the T16 nozzle holder is a Y-shaped moulding listed separately as the DJI Agras T16 OEM Spray Nozzle Holder
• You fly a T20, T20P, T25, T40, T50 or later Agras aircraft — these holders are identified only for the T30 and T10

---

💡 Why This Part Matters

The spray nozzle holder matters because a nozzle is only as good as its seat. A perfect tip that rocks in a cracked holder sprays a perfect pattern in a moving direction.

The trap with this part is its name. Several Agras aircraft have a part called a nozzle holder, and they are not the same moulding. On the T16 it is a Y-shaped holder with two arms. On the T30 and T10 it is this small rounded frame with a raised shoulder. Ordering by the words nozzle holder alone can put the wrong part in your hand.

So the match is made by shape. Lay the holder you removed beside the product images and check three things: the rounded-rectangular outline, the raised shoulder along one long side, and the small step at the centre of the opposite side. If all three agree, this is the part. If your old holder has arms, clamp ends or a stem, it is a different holder.

Equally, the holder is the wrong part to buy for a worn tip, a blocked filter, a weeping seal or a dripping valve. A new holder under a worn tip still sprays unevenly. The rock test on each nozzle separates a seating fault from a spray fault in seconds.

Do not glue a cracked holder and fly on. A repaired frame that looks whole can still let the nozzle move under vibration, and it usually does so in the middle of a job, far from the trailer.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Agras T30 OEM Spray Nozzle Holder (8 Pcs)

Brand: DJI

DJI family: Agras

Aircraft: DJI Agras T30 and T10

Compatible models: DJI Agras T30; DJI Agras T10

Fitment basis: Identified for the DJI Agras T30 and T10

Component: Spray nozzle holder

Aircraft system: Spraying

Installed position: On the spray system at a nozzle position

Primary function: Seats the nozzle and keeps it located and square

Form: Black open rounded-rectangular frame with a raised curved shoulder on one long side and a small centre step on the other

Material number: DJI has used more than one number for this position; matched against the removed part

Quantity supplied: 8 holders

Variants: DJI T30; DJI T10 — same pack of eight

Not included: Nozzles, tips, filters, sealing rings, connector nuts, check valves, hoses, spray bar

Electrical function: None

Key diagnostic: Rock each nozzle by hand; one that moves while its neighbours are firm points to its holder

Common failure modes: Cracked frame, chipped shoulder, distorted frame, holder lost in the field

Typical misdiagnosis: A weeping seal or worn tip blamed on the holder, or a loose nozzle blamed on the tip

Service interval: None published

Service adjustability: None

Classification: Spray system component, new

Also searched as: T30 nozzle holder; T10 nozzle holder; T30 nozzle retainer; T30 nozzle frame; Agras T30 nozzle seat; DJI T10 sprinkler holder

Disambiguation: Not the T16 Y-shaped nozzle holder, not a nozzle, not a sealing ring or connector nut, not a nozzle clip, not a spray bar

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Agras T30 spray nozzle holder 8 pcs

DJI T30 nozzle holder

DJI T10 nozzle holder

T30 nozzle retainer

T30 nozzle holder pack

Agras T10 spray nozzle holder

T30 nozzle frame

T30 nozzle seat

DJI T30 sprinkler holder

T30 loose nozzle fix

T10 nozzle crooked

T30 cracked nozzle holder

Agras T30 T10 nozzle parts

DJI Agras T30 Spray Nozzle Holder

Agras T30 Spray Nozzle Holder

DJI Agras T30 OEM Spray Nozzle Holder

Agras T30 spray nozzle holder replacement

DJI Agras T30 parts

DJI Agras T30 replacement parts

DJI Agras T10 Spray Nozzle Holder

DJI Agras T10 OEM Spray Nozzle Holder

Agras T10 spray nozzle holder replacement

DJI Agras T10 parts

DJI Agras T10 replacement parts

DJI Agras T30 spray system parts

DJI Agras nozzle parts

DJI Agras Parts

authorized DJI Agras retailer

DJI Agras T30 Spray Nozzle Holder Canada

DJI Agras T30 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T30 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T30 spray nozzle holder? A small black moulded frame that seats a spray nozzle at its position on the T30 or T10 spray system and keeps it located and square. This pack holds eight.

Which aircraft does it fit? It is identified for the DJI Agras T30 and T10. Choose the variant for the aircraft you fly; both are the same pack of eight.

Is it the same as the T16 nozzle holder? No. The T16 holder is a Y-shaped moulding with two arms and clamp ends, listed separately as the DJI Agras T16 OEM Spray Nozzle Holder. These are small rounded frames for the T30 and T10.

Does it fit the T20, T40 or T50? It is identified only for the T30 and T10. Do not fit it to another Agras aircraft on the strength of a similar shape.

How many holders are in the pack? Eight. Use what you need and keep the rest in the field kit as spares.

Are nozzles included? No. The holders come on their own. Move the nozzle, tip, filter, sealing ring and nut across from the old position, or replace damaged ones separately.

How do I know my old part is this holder? Lay it beside the product images. A rounded-rectangular frame with a raised shoulder along one long side and a small step at the centre of the other side is this part. If your part has arms or a stem, it is a different holder.

One nozzle rocks when I touch it. Is it the holder? Very likely, if its neighbours are firm. Remove the nozzle, take the holder out and flex it gently. A crack that is invisible at rest often opens when the frame is flexed.

One nozzle weeps at the joint. Will a new holder fix it? Usually not. Weeping at the joint is a sealing ring or connector nut. Check those first, and replace the holder only if it is cracked or chipped.

Can I glue a cracked holder? Not as a repair. A glued frame can look whole and still let the nozzle shift under vibration. Replace it.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Photograph your old holder face on and from the side and send it to us if you want that confirmed.

Which way round does it go? The same way as the one you removed. Photograph the holder in place before you take it out, and fit the new one with the shoulder on the same side.

Is there anything to adjust? No. The holder is a single moulding. It is whole and at its shape or it is not, and there is no app setting that compensates for a cracked one.

Can I fly with a holder missing? It is not a good idea. Without its holder a nozzle can shift, turn or work loose under vibration and spray pressure. Fit a holder from the pack first.

Can I fit it myself? Yes. Flush and drain the spray system, remove the nozzle, swap the holder the same way round, refit the nozzle, then rock it by hand and run clean water through it on the ground.

Is there a service interval? No. Replace a holder when it is cracked, chipped, distorted or missing. Touch each nozzle on the pre-flight walk-around; a loose one is felt before it is seen.