DJI Agras T40 OEM Airframe Fastener Field Kit

T40 OEM Airframe Fastener Field Kit | DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration | DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs) | DJI Agras T40-compatible Fixing Nut and Adapter Shaft | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 3 component lines, 3 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The T40 OEM Airframe Fastener Field Kit exists because the parts inside it are the ones that strand a T100 / T50 / T40 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras T100 / T50 / T40 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Fulfill using T40-compatible variants. Match every replacement fastener to its original location and specification.

---

📦 Package Includes

• 1 × DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration
• 1 × DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs)
• 1 × DJI Agras T40-compatible Fixing Nut and Adapter Shaft

---

🔧 Kit Overview

The DJI Agras T40 OEM Airframe Fastener Field Kit combines a broad fuselage screw assortment with rotating pin screws and fixing nut/adapter hardware for general T40 maintenance. It is intended as a compact workshop or field-truck reserve for technicians who repeatedly service covers, structural joints and folding hardware.

Curated by Ares Acres from genuine DJI OEM components sold individually. Not a factory-packaged DJI kit.

• Airframe maintenance
• Fold-joint service
• Cover and payload service
• Field spare hardware

---

🔩 Component-by-Component Breakdown

1. DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration

DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.

This line is configured by Ares Acres for the airframe named in the kit title. The description above covers what the component does and where it sits, which is common across the models it serves; the DJI material number is not printed here because it differs between airframes. Ask us and we will confirm the exact number for your aircraft before the kit ships.

Functionally, the DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration is responsible for a short and specific list of jobs: replace missing or damaged aircraft screws, support DJI Agras shell and fuselage repairs, secure aircraft structural assemblies, assist with arm and body maintenance, improve structural fastening reliability, support rebuild and crash-repair operations, reduce vibration-related hardware loosening, restore proper aircraft assembly integrity, improve technician repair efficiency, and organize commonly used repair hardware into one portable service kit. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Take structural fasteners out in the reverse of the order you intend to put them back, and keep them in the pattern they came out in. An egg carton, a magnetic tray with marked cells, or a strip of tape with the screws pressed into it in position order all do the job. Agras panels commonly use more than one length in the same shell, and a screw that is too long for its hole will bottom against structure or push into something behind the panel long before the head ever touches the surface it is supposed to clamp.

Start every fastener by hand. If it will not take the first two turns under finger pressure alone, stop and find out why instead of reaching for the driver, because a cross-thread started under power ruins the hole in a single turn. On a panel with several screws, thread all of them loosely first so the panel can float into alignment, then bring them up in stages in an alternating pattern rather than running each one down tight as you reach it.

Drive straight, with the tool in line with the screw axis, and work at low speed. Fasteners on an airframe sit at angles that tempt you to come at them from the side, and a bit held off-axis will cam out and round the head every time. Where a screw sits deeper than the bit reaches, use a longer bit rather than stacking a socket adapter on a short one, because every joint you add is another place the drive can wander under load.

The DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration earns its place in this kit because of how it fails. Operators replace it when they see missing aircraft screws, stripped or damaged fasteners, loose fuselage or shell components, vibration-related hardware wear, corroded or worn structural screws, incomplete repair hardware inventory, crash-related hardware damage, or difficulty securing aircraft body panels. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs)

DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs). Screw-type rotating pins / pivot fastening hardware. It installs at the airframe pivot and fastening points. Its job on the aircraft is straightforward: secure, rotation-capable fastening at pivot connections.

On the DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs), construction is premium, high-durability materials; the design is screw-type rotating pin, direct-fit; it mounts as direct-fit replacement component; this line supplies 2 Screws. Fitment covers DJI Agras T50, DJI Agras T40, DJI Agras T20P. Application: agricultural drone airframe maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs) is responsible for a short and specific list of jobs: fasten pivoting assemblies securely, allow controlled rotation where the airframe needs it, hold arm and assembly geometry consistent, keep fold points tight through daily cycling, reduce play and rattle at pivot connections, support flight stability under payload, replace worn, loose, or damaged pins, restore factory pivot integrity, install quickly during routine service, and maintain correct fitment across three models. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

In commercial service the DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs) lives through fold and unfold cycles every working day, flight loads and airframe stress, continuous propulsion vibration, torque stress from repeated tightening, dust and field grit working into the pivot, chemical mist and spray residue, moisture and washdown exposure, temperature swings in the field, and transport handling and road vibration. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.

Left in service past its useful life, the DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs) may contribute to play and slop at pivot points, inconsistent arm fold and lock-up, rattle and movement during transport, rising airframe vibration, accelerated wear at connected hardware, reduced flight stability, interrupted spraying missions, unexpected downtime, and reduced fleet reliability. A fresh one instead maintains pivot points worth trusting, clean, consistent arm fold and lock-up, a tight, rattle-free airframe, protected connected hardware, three-model fleet coverage, professional fleet standards, increased aircraft uptime, reliable commercial performance, and long-term operational confidence.

Take the weight off the joint before the pin comes out. Get the arm supported on a stand, a block or a second pair of hands so it is not hanging on the pin you are about to remove, and do it with the tank empty. A cantilevered arm binds the pin in its bore, which means you end up driving out a part that should have come out under finger pressure, and the arm drops the moment the pin clears and takes the bore edge with it as it goes.

Seat the driver fully before you apply any force. Pivot pin heads are the classic field casualty: a driver that is one size small or not pushed home rounds the drive out in half a turn, and a rounded pin head on an aircraft you need in the air tomorrow is a much bigger problem than the worn pin was. Clean dried mix out of the drive recess with a pick first, press the driver in hard and square, and break the pin loose with a short deliberate movement rather than a long slow lean.

Do one pivot at a time and keep its hardware together. If you are refreshing both pins, take one out, fit its replacement, and only then move to the second. Nothing on a pivot joint is guaranteed to be interchangeable side to side, and washers, shims and any spacer that sets the rotational drag look identical once they are loose in a tray. Note which face of each washer was against the arm before it comes off, and lay the parts out in the order they were removed.

The DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs) earns its place in this kit because of how it fails. Operators replace it when they see play or looseness at pivot points, pins that no longer hold torque, worn or polished pivot surfaces, damaged or fatigued threads, bent or deformed pin bodies, corrosion on pin surfaces, arms that fold or lock inconsistently, or rattle during transport. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras T40-compatible Fixing Nut and Adapter Shaft

DJI Agras T40-compatible Fixing Nut and Adapter Shaft. Fixing nut and adapter shaft / spray system connection hardware. It installs at the spray system fluid connection point. Its job on the aircraft is straightforward: secures and seals the spray fluid path connection.

On the DJI Agras T40-compatible Fixing Nut and Adapter Shaft, construction is durable molded and machined components; the design is matched threaded nut and adapter shaft pair; it mounts as direct-fit replacement components; this line supplies 1 Fixing Nut + 1 Adapter Shaft. Fitment covers DJI Agras T50, DJI Agras T40. Application: agricultural drone spray system maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T40-compatible Fixing Nut and Adapter Shaft is responsible for a short and specific list of jobs: lock the fluid path connection securely, seal the joint against leaks and weeping, maintain consistent fluid distribution, resist vibration-driven loosening, withstand chemical exposure at the joint, replace worn, stripped, or leaking hardware, restore factory connection integrity, install quickly to minimize downtime, maintain correct fitment on the spray system, and support preventative maintenance. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

In commercial service the DJI Agras T40-compatible Fixing Nut and Adapter Shaft lives through constant liquid flow loading, abrasive chemical formulations, chemical corrosion attack, repeated service and torque cycles, cross-threading and over-tightening stress, vibration at every joint, pressure-washing and rinse cycles, uV exposure, and heat cycling in summer conditions. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.

Left in service past its useful life, the DJI Agras T40-compatible Fixing Nut and Adapter Shaft may contribute to leaking or weeping joints, chemical drips and product waste, inconsistent fluid delivery, pressure loss in the spray system, chemical contact with the airframe, field teardowns and re-tightening stops, interrupted spraying missions, unexpected downtime, and higher repair costs over time. A fresh one instead maintains leak-free fluid connections, full spray system pressure, clean, waste-free operation, protected airframe surfaces, fast field-side service, factory fit and sealing, professional fleet standards, increased aircraft uptime, and reliable commercial performance.

Take the pressure out of the system and get the product out of the line before anything is loosened. Relieve pressure, drain what you can into a container, and rinse the outside of the fitting so the residue on it is water rather than concentrate. Gloves and eye protection matter here more than almost anywhere else on the aircraft, because a joint that is about to be opened has been holding chemical under pressure and it does not always let go politely.

Hold the fitting still while you turn the nut. Put a second wrench or a firm hand on the body that the nut threads onto, so the torque you apply goes into the joint and not into the hose, the barb, or whatever is anchoring the plumbing behind it. Twisting the assembly behind a stuck nut is the standard route from a small weep to a broken fitting and a much longer afternoon.

Start the nut by hand and give it several free turns before any tool touches it. This is the single most common place a good part is ruined during a field repair, because the joint is usually in an awkward spot, the operator is wearing gloves, and the nut goes on at a slight angle without anybody feeling it. If it will not start easily by hand, back it off completely and look at the thread rather than persuading it.

The DJI Agras T40-compatible Fixing Nut and Adapter Shaft earns its place in this kit because of how it fails. Operators replace it when they see leaking or weeping at the connection, worn or cross-threaded nut threads, stripped or damaged adapter shaft threads, nuts that no longer tighten firmly, degraded sealing surfaces, chemical-related deterioration, cracks in the nut or shaft body, or brittle, UV-aged material. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The T40 OEM Airframe Fastener Field Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration — supplied for the application named in the kit title
• DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs) — Secure, rotation-capable fastening at pivot connections
• DJI Agras T40-compatible Fixing Nut and Adapter Shaft — Secures and seals the spray fluid path connection

Observe torque, thread-locking and inspection requirements. Never select a replacement screw solely by visual similarity.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• Missing aircraft screws
• Stripped or damaged fasteners
• Loose fuselage or shell components
• Vibration-related hardware wear
• Corroded or worn structural screws
• Incomplete repair hardware inventory
• Crash-related hardware damage
• Difficulty securing aircraft body panels
• Preventive maintenance replacement requirements
• Fasteners that no longer hold torque or back out between flights
• Reusing fasteners after the pre-applied thread-lock has been broken
• Over-torquing into composite and plastic mount points
• Driving with worn or mismatched bits, rounding the heads
• Corrosion from chemical residue and standing moisture
• Play or looseness at pivot points
• Pins that no longer hold torque
• Worn or polished pivot surfaces
• Damaged or fatigued threads
• Bent or deformed pin bodies
• Corrosion on pin surfaces
• Arms that fold or lock inconsistently
• Rattle during transport
• Damage from over-torqued installs
• High-cycle pivot hardware
• Maintenance inspection findings
• Airframe rebuild projects
• Fleet refurbishment projects
• Preventative pre-season replacement
• Leaking or weeping at the connection
• Worn or cross-threaded nut threads
• Stripped or damaged adapter shaft threads
• Nuts that no longer tighten firmly
• Degraded sealing surfaces
• Chemical-related deterioration
• Cracks in the nut or shaft body
• Brittle, UV-aged material
• Joints that loosen between missions
• Seasonal spray system rebuilds
• Long-term commercial wear

Any one of these on a T100 / T50 / T40 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the T40 OEM Airframe Fastener Field Kit on a T100 / T50 / T40; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration. Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs). Work at the airframe pivot and fastening points. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it secure, rotation-capable fastening at pivot connections as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras T40-compatible Fixing Nut and Adapter Shaft. Work at the spray system fluid connection point. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it secures and seals the spray fluid path connection as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the T40 OEM Airframe Fastener Field Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 3

Aircraft coverage: DJI Agras T100 / T50 / T40

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration
Material number: configured per airframe — contact us to confirm

DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs)
Material number: configured per airframe — contact us to confirm
Component Type: Screw-type rotating pins / pivot fastening hardware
Installation Area: Airframe pivot and fastening points
Function: Secure, rotation-capable fastening at pivot connections
Package Quantity: 2 Screws
Construction: Premium, high-durability materials
Mounting Type: Direct-fit replacement component
Compatibility: DJI Agras T50, DJI Agras T40, DJI Agras T20P

DJI Agras T40-compatible Fixing Nut and Adapter Shaft
Material number: configured per airframe — contact us to confirm
Component Type: Fixing nut and adapter shaft / spray system connection hardware
Installation Area: Spray system fluid connection point
Function: Secures and seals the spray fluid path connection
Package Quantity: 1 Fixing Nut + 1 Adapter Shaft
Construction: Durable molded and machined components
Mounting Type: Direct-fit replacement components
Compatibility: DJI Agras T50, DJI Agras T40

---

🚜 Necessary For

The T40 OEM Airframe Fastener Field Kit suits operators running DJI Agras T100 / T50 / T40 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

General maintenance repeatedly exposes small structural fasteners to removal, dirt, thread damage and loss. This kit creates a dedicated T40 hardware reserve that is broader than a single repair-specific screw set.

Bought separately, these 3 lines are 3 chances to order the wrong variant, 3 shipments to wait on, and 3 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

This package gives T40 operators a dedicated small-hardware product for preventative maintenance and field repair.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras T40 OEM Airframe Fastener Field Kit

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Compatible aircraft: DJI Agras T100, DJI Agras T50, DJI Agras T40

Component count: 3

Contains: DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration

Contains: DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs); installed at Airframe pivot and fastening points

Contains: DJI Agras T40-compatible Fixing Nut and Adapter Shaft; installed at Spray system fluid connection point

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

DJI Agras T100

DJI Agras T100 Parts

DJI Agras T100 OEM Parts

DJI Agras T100 repair kit

Agras T100 parts USA

DJI Agras T50

DJI Agras T50 Parts

DJI Agras T50 OEM Parts

DJI Agras T50 repair kit

Agras T50 parts USA

DJI Agras T40

DJI Agras T40 Parts

DJI Agras T40 OEM Parts

DJI Agras T40 repair kit

Agras T40 parts USA

T40 OEM Airframe Fastener Field Kit

DJI Agras T40 OEM Airframe Fastener Field Kit

T40 OEM Airframe Fastener Field Kit OEM

T40 OEM Airframe Fastener Field Kit for sale

DJI Agras OEM Fuselage Screw Kit (70 Pcs) — T40 configuration

DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs)

DJI Agras T40-compatible Fixing Nut and Adapter Shaft

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Is this an official DJI-boxed kit? No. It is assembled by Ares Acres from genuine DJI OEM components that are each sold individually in our catalog. We list it this way deliberately so there is no confusion about what you are buying.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 3 component lines.

What is the Fuselage Screw Kit (70 Pcs)? It is the Fuselage Screw Kit (70 Pcs) supplied as a genuine DJI OEM replacement component on the DJI Agras T100.

Which DJI Agras models does this component fit? Listed fitment is DJI Agras T100. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

What is the DJI Agras rotating pin screw? It is a screw-type rotating pin used at the airframe's pivot and fastening points on the DJI Agras T50, T40, and T20P, providing a secure hold while still allowing the controlled rotation a folding airframe needs. Ares Acres supplies them as a direct-fit OEM two-piece set.

Which DJI Agras models do these rotating pins fit? The pins fit the DJI Agras T50, T40, and T20P, installing at the airframe pivot and fastening points.

Where does the DJI Agras T40-compatible Rotating Pin Screw Set (2 Pcs) go and what does it do? It installs at the airframe pivot and fastening points, where it secure, rotation-capable fastening at pivot connections.

What is the DJI Agras fixing nut and adapter shaft? It is a matched two-piece connection hardware set — one threaded fixing nut and its mating adapter shaft — that locks and seals the spray system's fluid path on the DJI Agras T50 and T40.

Which drones does this hardware fit? The DJI Agras T50 and T40 spray systems.

Where does the DJI Agras T40-compatible Fixing Nut and Adapter Shaft go and what does it do? It installs at the spray system fluid connection point, where it secures and seals the spray fluid path connection.

Which aircraft does this kit cover? DJI Agras T100, DJI Agras T50, DJI Agras T40. Confirm the component variant against your aircraft's parts diagram before installation.

---