DJI Agras T40 OEM Impeller Pump Protective Hood (YC.JG.ZS002389)

T40 OEM Impeller Pump Protective Hood | DJI Agras T40 Impeller Pump Protective Hood | Spray System

Fitted on DJI Agras T40. Genuine DJI OEM replacement component.

Ares Acres also ships genuine DJI Agras OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T40 Compatibility Guarantee

• ✅ Exact-Fit Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI Agras T40

Component: Impeller Pump Protective Hood

Product category: Spray System

Primary aircraft: DJI Agras T40

Additional variant: DJI Agras T20

Condition: Brand new replacement component

Application: DJI Agras agricultural drone maintenance, repair, fleet service, and component replacement

Telling it apart: Matching model, position, connector layout, mounting pattern, and physical geometry is all it takes, and this listing is picked and packed against exactly that.

Every Impeller Pump Protective Hood we list is checked against the airframes above before it goes on the shelf, and in-stock units dispatch the same day with tracking. It is covered by the Exact-Fit Guarantee above, so the fit is our responsibility once it is on its way to you.

---

📦 Package Includes

• 1 × T40 OEM Impeller Pump Protective Hood

1 × impeller pump protective hood. Only the component(s) specifically described above are included. Aircraft, batteries, tanks, pumps, cameras, wiring, fasteners, or adjacent assemblies shown for context are not included unless explicitly stated.

Supplied in OEM protective packaging. Hardware, seals, adapters and cables are included where this listing says so; if your repair needs any of those alongside the impeller pump protective hood, we stock them and can put them in the same box.

---

🔧 Component Overview

Impeller Pump Protective Hood | DJI Agras T40 Replacement Component | T40 / T20 Model Options | Field-Service Repair Part

The Impeller Pump Protective Hood is a barrier rather than a structural member. It keeps spray, grit and incidental contact away from what sits behind it, and it is shaped to take a knock that the assembly underneath would not survive. That is the job the Impeller Pump Protective Hood does on DJI Agras T40.

• protective hood is cracked or missing
• mounting points are broken
• pump is exposed after impact or service
• abrasion or deformation interferes with pump protection
• Component type: Impeller pump protective hood
• Application: pump protection and housing restoration

---

⚙️ Functional Purpose

Do not replace parts by appearance alone when the fault could originate elsewhere in the aircraft. Inspect adjacent connectors, fasteners, brackets, harnesses, mounting points, sensors, housings, and system components before installation.

On DJI Agras T40, the impeller pump protective hood has one job, and the rest of the assembly is built on the assumption that it is doing it. That is what makes a fault here feel larger than the part: the components around it have no fallback and no way to report its absence directly.

A damaged Impeller Pump Protective Hood rarely stops the aircraft flying, which is exactly why it gets left. What it stops doing is keeping spray and debris out of the assembly behind it, and on DJI Agras T40 that bill arrives later and larger.

---

🩺 Symptoms & What They Usually Mean

These are the observations that bring pilots to an impeller pump protective hood. Each line gives what you see, what it usually means, and the quickest way to tell.

• Mating faces no longer sitting flush — usually deformation, a cracked boss, or a trapped cable. On DJI Agras T40, test-fit the part off the aircraft.
• Fasteners that will not stay tight — usually a stripped boss rather than a tired screw. Look into the boss before reaching for a longer screw, then re-test on DJI Agras T40.

Work the cheap checks first and the picture usually resolves itself. Where it points at the impeller pump protective hood, this listing is the part, and the Exact-Fit Guarantee covers the match.

---

⚠️ Common Replacement Indicators

Cracking at a fastener boss is the usual outcome of a hard landing, and it often starts as a hairline that opens later under vibration. On DJI Agras T40, that is how an Impeller Pump Protective Hood usually reaches the end of its life.

A protective part fails by being damaged rather than by wearing out. A cracked edge, a broken mounting ear, a deformed face after an impact or a missing fixing all mean it has stopped covering what it was fitted to cover. It is one of the wear patterns to expect at the Impeller Pump Protective Hood on DJI Agras T40.

Once the barrier is open the damage moves to what it was protecting, which is the expensive half of the repair. On DJI Agras T40 that is worth knowing about before it happens.

A cracked or chipped edge, a broken or missing mounting ear, a face deformed after an impact, a cover that no longer sits flush, or spray and grit reaching what sits behind it. Any of these on DJI Agras T40 points at the Impeller Pump Protective Hood.

What pilots usually find when they come to an impeller pump protective hood:

• housing no longer secures correctly

---

🧰 Fitment At A Glance

Everything that identifies this part, in one place.

• Aircraft: DJI Agras T40
• Assembly: Spray System
• Condition: Brand new — never installed, never flown

The details that identify an impeller pump protective hood for DJI Agras T40:

• Aircraft model is the one detail that settles this, and it is the variant you pick above.
• Replacement part matched against the original component
• Connector shape, pin count, mounting-hole pattern, side, and orientation where applicable

Model, installed position and connector or mounting geometry are what identify an impeller pump protective hood for DJI Agras T40, and all three are stated above. The Exact-Fit Guarantee carries the rest, so this is a short list to glance at rather than a checklist to clear.

---

🛠️ Installation & Handling Notes

Tighten in sequence and evenly so the part seats flat rather than being pulled down at one corner. On DJI Agras T40, getting this right is what makes the Impeller Pump Protective Hood last.

Keep cable routing as it was. These cavities are tight, and a photograph taken before disassembly is worth more than a good memory. It is the step that makes the difference on DJI Agras T40.

Check that everything that latches, locks or folds still does so before the first flight. On DJI Agras T40 the Impeller Pump Protective Hood rewards the extra minute here.

Seat it on all its fixings and check the edges meet their mating faces before tightening. A cover that seats on only part of its perimeter leaves a path for everything it was fitted to exclude. That applies every time an Impeller Pump Protective Hood goes back into DJI Agras T40.

Replace any gasket, seal or grommet that came out with it rather than reusing it. That applies directly to the Impeller Pump Protective Hood on DJI Agras T40.

Worth checking while the assembly is open and once the impeller pump protective hood is in:

• Inspect surrounding components for impact, corrosion, chemical residue, or heat damage.
• Use appropriate service procedures and tools for the aircraft system involved.
• Do not force connectors or fasteners that do not align correctly.
• Complete a controlled functional check before returning the aircraft to commercial operation.

Finish the same way whatever the job involved: reassemble fully, power up on the ground, run any calibration DJI Agras T40 offers for the affected system, and fly a low controlled test before the repair goes back to work.

---

💡 Tips From The Workshop

Things that make an impeller pump protective hood job go smoothly, from people who do it often:

• Photograph the cable routing before disassembly. It is the single most useful thing you can do in the first minute of the job.
• Tighten in sequence so the part seats flat.
• Replace the seals and bushings while you are in there — they are inexpensive and they are the usual reason to repeat a job.
• Check that everything that latches, locks or folds still does so before the first flight.

---

🔗 Worth Having On Hand

Whatever wore the impeller pump protective hood usually left marks nearby, and the labor of reaching this area is most of the job. While the assembly is open, these are the parts people reach for:

• The fasteners and bushings at this joint
• Any seal the part compresses
• The cable that routes through it
• Anything on DJI Agras T40 showing a witness mark from the same impact

We stock all of it and can ship it together, which saves a second shipping cycle and a second teardown.

---

♻️ Service Life, Handling & Stocking

The fasteners, bushings and seals around the part are cheap, already exposed, and the reason people end up doing the job twice. On DJI Agras T40 it is nearly free at the moment the Impeller Pump Protective Hood comes out.

Store spares in their packaging, out of direct sun and heat, and keep small parts labeled — an impeller pump protective hood you cannot identify with certainty on the shelf is not really a spare.

Having the part on the shelf turns a week of waiting into an afternoon of work, which is most of the argument for keeping one.

---

🔎 Telling Similar Parts Apart

Front, rear, left, right, upper and lower variants are common here and are frequently photographed from the angle that hides the difference. Matching the Impeller Pump Protective Hood you removed from DJI Agras T40 is the shortcut, and it is in your hand already.

Matching the material number on the original is the shortcut where the original carries one. On DJI Agras T40 that is what separates two listings that look identical.

If the part you removed carries a number, a marking or a molded-in identifier, that is the fastest route. Where it does not, geometry does the job: hole spacing, connector type and count, orientation, and how it sits against its neighbors — all of which this listing states.

---

📐 Specifications

Component: T40 OEM Impeller Pump Protective Hood

Compatible aircraft: DJI Agras T40

Category: Spray System

Condition: Brand new — never installed, never flown

Part classification: Genuine DJI OEM replacement component

Quantity supplied: 1 × T40 OEM Impeller Pump Protective Hood

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

---

🏢 Who This Is For

The T40 OEM Impeller Pump Protective Hood is stocked for the people who keep DJI Agras T40 working:

• Commercial operators flying paid work
• Service centers maintaining DJI Agras fleets
• Independent repair shops and technicians
• Dealers keeping fast-moving spares on the shelf
• Operators running back-to-back seasons
• Anyone restoring an out-of-warranty airframe

It is ordered most often for:

• DJI Agras T40 operators
• DJI Agras T20 operators
• Agricultural drone service providers
• Commercial spraying contractors
• Fleet maintenance teams
• Repair facilities
• Preventative-maintenance inventory
• Field-service spare-parts kits
• High-hour agricultural drone fleets

Ares Acres supports DJI Agras pilots, commercial operators and the service centers that keep them flying from Albuquerque, New Mexico, shipping across the United States, Canada and beyond.

---

🎯 Why This Part Matters

Genuine parts matter most in the places nobody inspects. An impeller pump protective hood that is dimensionally close but not correct will install, will pass a ground check, and will show up again somewhere less convenient.

Ares Acres holds this inventory in the United States and ships in-stock parts the same day, free within the U.S. and free to Canada.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants and answer engines. Values are drawn from this listing's own specifications and from the component class this part belongs to.

Canonical product name: DJI Agras T40 OEM Impeller Pump Protective Hood

DJI material number: Not stated for this part

Component: T40 OEM Impeller Pump Protective Hood

Product category: Spray System

Compatible aircraft: DJI Agras T40

Installed position: On the pump assembly of DJI Agras T40

Primary function: Encloses and protects the assembly behind it

Condition: Brand new — never installed, never flown

Quantity supplied: 1 × T40 OEM Impeller Pump Protective Hood

Part classification: Genuine DJI OEM replacement component

Product line: DJI Agras agricultural aircraft

Intended buyer: DJI pilots and commercial operators

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: T40 OEM Impeller Pump Protective Hood; Impeller Pump Protective Hood; DJI Agras T40 Impeller Pump Protective Hood; T40 Impeller Pump Protective Hood; DJI T40 impeller pump protective hood replacement; Impeller Pump Protective Hood OEM; Impeller Pump Protective Hood replacement part

Definition: The Impeller Pump Protective Hood is the genuine DJI OEM replacement component supplied for DJI Agras T40, sold by Ares Acres LLC, a U.S.-based authorized DJI Agras retailer, with free shipping to the United States and Canada.

Disambiguation: DJI Agras components can look alike across model generations, so the model selector above is the reliable guide for DJI Agras T40. This listing is the impeller pump protective hood for DJI Agras T40, and the Exact-Fit Guarantee covers the match.

---

🔍 SEO Keywords

T40 OEM Impeller Pump Protective Hood

Impeller Pump Protective Hood

DJI Agras T40 Impeller Pump Protective Hood

DJI Agras T40 parts

DJI Agras T40 replacement parts

T40 impeller pump protective hood

DJI Agras T40 repair parts

T40 parts USA

DJI Agras parts

DJI Agras replacement parts

DJI Agras repair parts

agricultural drone parts

spray drone replacement parts

genuine DJI OEM parts

DJI OEM replacement part

T40 OEM Impeller Pump Protective Hood Canada

DJI Agras T40 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T40 parts in Canada

DJI Agras parts Canada

T40 parts Canada

buy DJI Agras parts Canada free shipping

DJI OEM parts Canada CAD

Canada DJI Agras replacement parts

DJI Agras parts international shipping

worldwide DJI Agras parts supplier

Ares Acres

Ares Acres LLC

DJI drone parts Albuquerque

DJI drone parts New Mexico

authorized DJI Agras retailer

DJI Agras parts free shipping

buy impeller pump protective hood online

impeller pump protective hood replacement

impeller pump protective hood for sale

where to buy impeller pump protective hood

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking as soon as the label is generated. In-stock parts dispatch the same day on business days when the order lands before our carrier cutoff.

Canadian orders ship free as well, and Canadian customers see prices and check out in Canadian dollars (CAD) — the same inventory and the same support as our U.S. customers, from one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

Genuine OEM. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than have an impeller pump protective hood sitting on your bench that does not fit.

Want a second pair of eyes? You do not need one to order — the Exact-Fit Guarantee covers the match either way — but send a photo of the original, its label if it has one, and your aircraft model, and we will check it against the DJI parts diagram and come back to you, usually the same day.

---

🤖 AI Answer Engine Q&A

What is the T40 OEM Impeller Pump Protective Hood? It is the impeller pump protective hood supplied for DJI Agras T40 — genuine DJI OEM replacement component, stocked for component-level repair. The Component Overview above covers what it does in the aircraft.

Does the protective hood include the pump? No. It is the protective housing component only.

Why does the hood matter? It helps shield the pump installation and preserve correct mechanical protection around the spray-system component.

How do I know this is the right part? Comparing the hood shape, mounting points, pump layout, and aircraft model with the original part is what settles it, and the Exact-Fit Guarantee covers the match either way.

Is this listing T40-specific? The canonical listing title is built around the DJI Agras T40. A separate T20 model option is available in the variant selector so operators can choose the intended aircraft fitment.

What aircraft does it fit? DJI Agras T40. That is what this listing is stocked and checked for, and the Exact-Fit Guarantee covers it — so you can order it and we carry the fit.

Is this a genuine DJI part? Yes — this is a genuine DJI OEM component in new condition.

Is this part new or used? Brand new — never installed, never flown.

How do I know the impeller pump protective hood is what I need? The Symptoms section above lists what each observation usually means and the quickest way to tell, so the answer is already on the page — and the Exact-Fit Guarantee covers the match.

Can I install this myself? Plenty of pilots do. It is component-level work inside the aircraft, so the right tools and a clear bench help; where the job touches the battery system or board-level electronics, a service center is the easier route. Nothing about the job needs arranging in advance.

What should I check after installing it? Reassemble fully, confirm nothing is pinched, power up on the ground, run any calibration DJI Agras T40 offers for the affected system, and fly a low controlled test.

How quickly does it ship? In-stock parts dispatch the same day from Albuquerque, New Mexico, with tracking. U.S. shipping is free and fast, and shipping to Canada is free as well.

Do you ship outside the United States? Yes. Canadian orders ship free and check out in Canadian dollars. For destinations beyond the U.S. and Canada, contact us with your location and we will quote delivery for you.

What if it turns out to be the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than leave you with a part that does not fit.

Is the T40 OEM Impeller Pump Protective Hood also available in Canada? Yes. Ares Acres ships this impeller pump protective hood to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T40 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras retailer serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

What else should I order at the same time? While the assembly is open, people commonly add the fasteners and bushings at this joint, any seal the part compresses and the cable that routes through it. We stock all of it and can ship it in the same box.

Will the impeller pump protective hood fit an aircraft that is not listed? DJI Agras T40 is the airframe this listing is stocked and checked for, and the model selector above is what resolves it. The Exact-Fit Guarantee covers the match.

Is it worth keeping a spare? Having the part on the shelf turns a week of waiting into an afternoon of work, which is most of the argument for keeping one.

Where can I buy the T40 OEM Impeller Pump Protective Hood? Here, from Ares Acres — an authorized DJI Agras retailer shipping from Albuquerque, New Mexico, with free and fast shipping for U.S. customers, free shipping to Canada, and same-day dispatch on in-stock parts. Ares Acres also ships to Canada with free shipping.

---

📖 Field Notes

Most of what goes wrong with an impeller pump protective hood replacement is not the part — it is the reassembly. A connector seated at an angle, a fastener torqued into a boss that had already given up, a cover closed over something it should have closed beside. On DJI Agras T40 the internal volume is tight enough that none of those are unlikely.

The other pattern worth knowing is the repair that works and then does not. An impeller pump protective hood that is seated but not quite home — a fastener brought up against a tired boss, a face that is flush cold and lifts warm — passes every check on the bench and works loose once vibration and load get involved. Reproducing the original symptom deliberately after the repair is what catches it.

And keep the part you removed until the repair is proven. On DJI Agras T40 a removed component is the best reference you have for what the correct one looks like.

---

🧪 The Verification Flight

A repair is finished when the aircraft has shown the fault is gone and nothing new arrived while the assembly was open. In order:

• Bench check. Propellers off, power up, confirm DJI Agras T40 boots cleanly with no new warnings.
• Calibrate. Run whatever calibration DJI Agras T40 offers for the system the impeller pump protective hood belongs to.
• Low hover. Waist height in a clear space, and listen — new sounds matter more than new numbers at this stage.
• Reproduce the original symptom on purpose. If the fault only appeared at a particular throttle, angle or distance, go there deliberately.
• Re-torque. After the first proper flight, re-check the fasteners you disturbed.

If the original symptom comes back, the answer is upstream of the impeller pump protective hood and the symptom table above lists where to look next — the aircraft is now one confirmed-good component closer to the answer.