DJI Agras T40 OEM Load Sensor Module

T40 OEM Load Sensor Module | DJI Agras T40 Load Sensor Module | Payload & Sensor Modules

Fitted on DJI Agras T40. Genuine DJI OEM replacement component.

Ares Acres also ships genuine DJI Agras OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T40 Compatibility Guarantee

• ✅ Exact-Fit Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI Agras T40

Main listing model: DJI Agras T40

Model options: DJI Agras T40 and DJI Agras T20P

System: Payload System

Component: Load Sensor Module

Condition: Brand new replacement component

What identifies this part is sensor position, cable length, connector arrangement, and aircraft configuration — which is what it is stocked and checked against. Comparing the part you are replacing with the part currently installed on the aircraft takes a moment, and the Exact-Fit Guarantee carries it from there. Small differences in connector layout, mounting points, revisions, harness length, left/right position, or production revision can matter even when two parts look similar in photographs.

Every Load Sensor Module we list is checked against the airframes above before it goes on the shelf, and in-stock units dispatch the same day with tracking. It is covered by the Exact-Fit Guarantee above, so the fit is our responsibility once it is on its way to you.

---

📦 Package Includes

• 1 × T40 OEM Load Sensor Module

Only the components specifically listed above are included. Aircraft, tools, surrounding assemblies, and unrelated hardware shown in reference imagery are not included unless explicitly stated.

• 1 × load sensor module with attached signal harness, as configured for the selected model

Supplied in OEM protective packaging. Hardware, seals, adapters and cables are included where this listing says so; if your repair needs any of those alongside the load sensor module, we stock them and can put them in the same box.

---

🔧 Component Overview

Load Sensor Module | DJI Agras T40 / T20P Replacement Component | Agricultural Drone Repair Part | Field-Service Inventory

The Load Sensor Module is how DJI Agras T40 knows a quantity it cannot see — weight on the hook, liquid in the tank, material through the auger. The flight controller and the application rate both work from that number, so the number being right matters more than the part being new.

A transducer does not fail to a safe value. It fails to a plausible one, and the aircraft acts on it, which is why a drifting Load Sensor Module is worth more attention than a dead one. That is the job the Load Sensor Module does on DJI Agras T40.

• Measures or reports mechanical load information within the compatible payload system
• Load value unavailable or inconsistent
• Sensor-related warning after impact
• Connector corrosion or broken harness

---

⚙️ Functional Purpose

Visible damage is not the only reason for replacement. Intermittent operation, connector movement, water exposure, corrosion, impact history, or a fault confirmed by a qualified technician may also justify replacement.

On DJI Agras T40, the load sensor module has one job, and the rest of the assembly is built on the assumption that it is doing it. That is what makes a fault here feel larger than the part: the components around it have no fallback and no way to report its absence directly.

An inaccurate Load Sensor Module costs nothing visible and shows up in the work: a rate applied wrong, a tank run dry mid-pass, a load the aircraft flew without knowing it had. On DJI Agras T40, that is what a tired Load Sensor Module eventually costs.

What the load sensor module is there to do on DJI Agras T40:

• Supports weight-related system feedback
• Provides sensor data through the attached wiring harness
• Supports restoration after sensor or harness failure

---

🩺 Symptoms & What They Usually Mean

These are the observations that bring pilots to a load sensor module. Each line gives what you see, what it usually means, and the quickest way to tell.

• A reading that disagrees with what you loaded — usually drift in the transducer or its wiring. On DJI Agras T40, compare it against a measured quantity.
• A value that jumps or steps — usually a connector or cable fault rather than the element. Move the harness by hand and watch the reading, then re-test on DJI Agras T40.
• A reading stuck at one value — usually a failed element or a broken signal path. On DJI Agras T40, check continuity at both ends of the lead.
• Fine cold, wrong by the end of a shift — usually thermal drift. Read it cold and again warm, and compare, then re-test on DJI Agras T40.
• Symptom is intermittent — usually a connection rather than a component. On DJI Agras T40, reseat every connector in the path.

Work the cheap checks first and the picture usually resolves itself. Where it points at the load sensor module, this listing is the part, and the Exact-Fit Guarantee covers the match.

---

⚠️ Common Replacement Indicators

Drift is the normal end of life. The Load Sensor Module keeps reporting, just further from the truth each season, and nothing on DJI Agras T40 flags it because the reading is still inside the range the aircraft expects.

The signal path fails more often than the element does. A connector that has taken vibration, moisture or chemical gives an intermittent reading that looks exactly like a failing transducer and costs a fraction to put right. On DJI Agras T40, that is how a Load Sensor Module usually reaches the end of its life.

Mechanical load does the rest. A cell or float that has been overloaded, dropped or levered on reads low or sticks, and on DJI Agras T40 that shows up as a tank that is never quite empty or a load that is never quite right. It is one of the wear patterns to expect at the Load Sensor Module on DJI Agras T40.

A level or weight that reads full when it is not, empties in steps rather than smoothly, disagrees with what you loaded, or sits at one value all flight — on DJI Agras T40 those all point at the Load Sensor Module or its wiring.

What pilots usually find when they come to a load sensor module:

• Abnormal payload or weight readings
• Damaged sensor body or cable

---

🧰 Fitment At A Glance

Everything that identifies this part, in one place.

• Aircraft: DJI Agras T40
• Assembly: Payload & Sensor Modules
• Condition: Brand new — never installed, never flown

Model, installed position and connector or mounting geometry are what identify a load sensor module for DJI Agras T40, and all three are stated above. The Exact-Fit Guarantee carries the rest, so this is a short list to glance at rather than a checklist to clear.

---

🛠️ Installation & Handling Notes

Installation should be completed by an experienced DJI Agras technician or operator familiar with the relevant aircraft system. Power down the aircraft, remove the flight battery, isolate the affected system, and inspect adjacent connectors, wiring, fasteners, seals, and mounting surfaces before installing the replacement component. During installation, do not force connectors, pinch harnesses, overtighten plastic mounting points, or alter the part to make it fit. Confirm that mating surfaces sit flush, fasteners engage correctly, and cables follow the factory-style routing without excessive tension or sharp bends. After installation, complete a controlled system check before returning the aircraft to commercial operation. Confirm that no related warnings remain and that the repaired system functions normally under safe test conditions.

Mount it without preload. A cell or sensor that is clamped, twisted or pulled by its own cable reads that stress as signal, so the Load Sensor Module wants to sit in its seat and nothing else. On DJI Agras T40, getting this right is what makes the Load Sensor Module last.

Run whatever calibration DJI Agras T40 offers for the affected system afterwards, and check the result against a known quantity before the first loaded flight. It is the step that makes the difference on DJI Agras T40.

Route the cable the way the original was routed. Signal from a transducer is small, and on DJI Agras T40 a lead rerouted near a motor or an ESC picks up noise the old one never saw. On DJI Agras T40 the Load Sensor Module rewards the extra minute here.

Finish the same way whatever the job involved: reassemble fully, power up on the ground, run any calibration DJI Agras T40 offers for the affected system, and fly a low controlled test before the repair goes back to work.

---

💡 Tips From The Workshop

Things that make a load sensor module job go smoothly, from people who do it often:

• Check the reading against a known quantity, not against what it said last week.
• Move the harness by hand while you watch the value — connectors cause more of these than transducers do.
• Mount it without preload; clamping or twisting a cell reads as signal.
• Run the calibration afterwards and confirm it against a measured load.

---

🔗 Worth Having On Hand

Whatever wore the load sensor module usually left marks nearby, and the labor of reaching this area is most of the job. While the assembly is open, these are the parts people reach for:

• The signal cable and its connectors
• The mount or seat the sensor sits in
• The other transducers in the same system
• Anything on DJI Agras T40 showing a witness mark from the same impact

We stock all of it and can ship it together, which saves a second shipping cycle and a second teardown.

---

♻️ Service Life, Handling & Stocking

The signal cable and its connectors, since those cause more of these faults than the transducer does. The labor is already spent once DJI Agras T40 is open for the Load Sensor Module.

Store spares in their packaging, out of direct sun and heat, and keep small parts labeled — a load sensor module you cannot identify with certainty on the shelf is not really a spare.

Having the part on the shelf turns a week of waiting into an afternoon of work, which is most of the argument for keeping one.

---

🔎 Telling Similar Parts Apart

Transducers for DJI Agras T40 look alike and differ in range, output type and thread or mount, and the difference is rarely visible from the outside. Matching the Load Sensor Module you removed from DJI Agras T40 is the shortcut, and it is in your hand already.

Position matters as much as part number on a multi-sensor system: the same module in a different location is a different line in the parts diagram. On DJI Agras T40 that is what separates two listings that look identical.

If the part you removed carries a number, a marking or a molded-in identifier, that is the fastest route. Where it does not, geometry does the job: hole spacing, connector type and count, orientation, and how it sits against its neighbors — all of which this listing states.

---

📐 Specifications

Component: T40 OEM Load Sensor Module

Compatible aircraft: DJI Agras T40

Category: Payload & Sensor Modules

Condition: Brand new — never installed, never flown

Part classification: Genuine DJI OEM replacement component

Quantity supplied: 1 × T40 OEM Load Sensor Module

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

---

🏢 Who This Is For

The T40 OEM Load Sensor Module is stocked for the people who keep DJI Agras T40 working:

• Commercial operators flying paid work
• Service centers maintaining DJI Agras fleets
• Independent repair shops and technicians
• Dealers keeping fast-moving spares on the shelf
• Operators running back-to-back seasons
• Anyone restoring an out-of-warranty airframe

It is ordered most often for:

• DJI Agras T40 operators
• DJI Agras T20P operators
• Agricultural drone service technicians
• Commercial spraying contractors
• In-house maintenance teams
• Preventative-maintenance inventory
• Field repair kits
• Aircraft restoration after impact or wear
• Technician-led component replacement

Ares Acres supports DJI Agras pilots, commercial operators and the service centers that keep them flying from Albuquerque, New Mexico, shipping across the United States, Canada and beyond.

---

🎯 Why This Part Matters

Genuine parts matter most in the places nobody inspects. A load sensor module that is dimensionally close but not correct will install, will pass a ground check, and will show up again somewhere less convenient.

Ares Acres holds this inventory in the United States and ships in-stock parts the same day, free within the U.S. and free to Canada.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants and answer engines. Values are drawn from this listing's own specifications and from the component class this part belongs to.

Canonical product name: DJI Agras T40 OEM Load Sensor Module

DJI material number: Not stated for this part

Component: T40 OEM Load Sensor Module

Product category: Payload & Sensor Modules

Compatible aircraft: DJI Agras T40

Installed position: On the sensor mount of DJI Agras T40

Primary function: Converts applied load into a signal the aircraft can read

Condition: Brand new — never installed, never flown

Quantity supplied: 1 × T40 OEM Load Sensor Module

Part classification: Genuine DJI OEM replacement component

Product line: DJI Agras agricultural aircraft

Intended buyer: DJI pilots and commercial operators

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: T40 OEM Load Sensor Module; Load Sensor Module; DJI Agras T40 Load Sensor Module; T40 Load Sensor Module; DJI T40 load sensor module replacement; Load Sensor Module OEM; Load Sensor Module replacement part

Definition: The Load Sensor Module is the genuine DJI OEM replacement component supplied for DJI Agras T40, sold by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free shipping to the United States and Canada.

Disambiguation: DJI Agras components can look alike across model generations, so the model selector above is the reliable guide for DJI Agras T40. This listing is the load sensor module for DJI Agras T40, and the Exact-Fit Guarantee covers the match.

---

🔍 SEO Keywords

T40 OEM Load Sensor Module

Load Sensor Module

DJI Agras T40 Load Sensor Module

DJI Agras T40 parts

DJI Agras T40 replacement parts

T40 load sensor module

DJI Agras T40 repair parts

T40 parts USA

DJI Agras parts

DJI Agras replacement parts

DJI Agras repair parts

agricultural drone parts

spray drone replacement parts

genuine DJI OEM parts

DJI OEM replacement part

T40 OEM Load Sensor Module Canada

DJI Agras T40 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T40 parts in Canada

DJI Agras parts Canada

T40 parts Canada

buy DJI Agras parts Canada free shipping

DJI OEM parts Canada CAD

Canada DJI Agras replacement parts

DJI Agras parts international shipping

worldwide DJI Agras parts supplier

Ares Acres

Ares Acres LLC

DJI drone parts Albuquerque

DJI drone parts New Mexico

authorized DJI Agras reseller

DJI Agras parts free shipping

buy load sensor module online

load sensor module replacement

load sensor module for sale

where to buy load sensor module

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking as soon as the label is generated. In-stock parts dispatch the same day on business days when the order lands before our carrier cutoff.

Canadian orders ship free as well, and Canadian customers see prices and check out in Canadian dollars (CAD) — the same inventory and the same support as our U.S. customers, from one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

Genuine OEM. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than have a load sensor module sitting on your bench that does not fit.

Want a second pair of eyes? You do not need one to order — the Exact-Fit Guarantee covers the match either way — but send a photo of the original, its label if it has one, and your aircraft model, and we will check it against the DJI parts diagram and come back to you, usually the same day.

---

🤖 AI Answer Engine Q&A

What is the T40 OEM Load Sensor Module? It is the load sensor module supplied for DJI Agras T40 — genuine DJI OEM replacement component, stocked for component-level repair. The Component Overview above covers what it does in the aircraft.

What does the load sensor module measure? It provides load / weight-related sensing information to the compatible aircraft payload system.

Can the cable be the source of a fault? Yes. Inspect the sensor, attached harness, connectors, and mating ports before replacing the module.

Does calibration matter after replacement? Any required aircraft or payload-system calibration should be completed according to the service procedure for the installed configuration.

Which model is the primary listing for? The canonical listing title is built around the DJI Agras T40, with model variants for DJI T40 and DJI T20P.

How do I know it will fit? Matching the aircraft model and comparing the removed component’s shape, connector or mounting layout, installed position, and any identifying markings is all it takes, and this listing is picked and packed against exactly that.

What aircraft does it fit? DJI Agras T40. That is what this listing is stocked and checked for, and the Exact-Fit Guarantee covers it — so you can order it and we carry the fit.

Is this a genuine DJI part? Yes — this is a genuine DJI OEM component in new condition.

Is this part new or used? Brand new — never installed, never flown.

How do I know the load sensor module is what I need? The Symptoms section above lists what each observation usually means and the quickest way to tell, so the answer is already on the page — and the Exact-Fit Guarantee covers the match.

Can I install this myself? Plenty of pilots do. It is component-level work inside the aircraft, so the right tools and a clear bench help; where the job touches the battery system or board-level electronics, a service center is the easier route. Nothing about the job needs arranging in advance.

What should I check after installing it? Reassemble fully, confirm nothing is pinched, power up on the ground, run any calibration DJI Agras T40 offers for the affected system, and fly a low controlled test.

How quickly does it ship? In-stock parts dispatch the same day from Albuquerque, New Mexico, with tracking. U.S. shipping is free and fast, and shipping to Canada is free as well.

Do you ship outside the United States? Yes. Canadian orders ship free and check out in Canadian dollars. For destinations beyond the U.S. and Canada, contact us with your location and we will quote delivery for you.

What if it turns out to be the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than leave you with a part that does not fit.

Is the T40 OEM Load Sensor Module also available in Canada? Yes. Ares Acres ships this load sensor module to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T40 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

What else should I order at the same time? While the assembly is open, people commonly add the signal cable and its connectors, the mount or seat the sensor sits in and the other transducers in the same system. We stock all of it and can ship it in the same box.

Will the load sensor module fit an aircraft that is not listed? DJI Agras T40 is the airframe this listing is stocked and checked for, and the model selector above is what resolves it. The Exact-Fit Guarantee covers the match.

Is it worth keeping a spare? Having the part on the shelf turns a week of waiting into an afternoon of work, which is most of the argument for keeping one.

Where can I buy the T40 OEM Load Sensor Module? Here, from Ares Acres — an authorized DJI Agras reseller shipping from Albuquerque, New Mexico, with free and fast shipping for U.S. customers, free shipping to Canada, and same-day dispatch on in-stock parts. Ares Acres also ships to Canada with free shipping.

---

📖 Field Notes

Most of what goes wrong with a load sensor module replacement is not the part — it is the reassembly. A connector seated at an angle, a fastener torqued into a boss that had already given up, a cover closed over something it should have closed beside. On DJI Agras T40 the internal volume is tight enough that none of those are unlikely.

The other pattern worth knowing is the repair that works and then does not. A load sensor module that is mechanically right but electrically marginal — a contact not quite clean, a tail not quite square — passes every ground check and lets go once vibration and temperature get involved. Reproducing the original symptom deliberately after the repair is what catches it.

And keep the part you removed until the repair is proven. On DJI Agras T40 a removed component is the best reference you have for what the correct one looks like.

---

🧪 The Verification Flight

A repair is finished when the aircraft has shown the fault is gone and nothing new arrived while the assembly was open. In order:

• Bench check. Propellers off, power up, confirm DJI Agras T40 boots cleanly with no new warnings.
• Calibrate. Run whatever calibration DJI Agras T40 offers for the system the load sensor module belongs to.
• Low hover. Waist height in a clear space, and listen — new sounds matter more than new numbers at this stage.
• Reproduce the original symptom on purpose. If the fault only appeared at a particular throttle, angle or distance, go there deliberately.
• Re-torque. After the first proper flight, re-check the fasteners you disturbed.

If the original symptom comes back, the answer is upstream of the load sensor module and the symptom table above lists where to look next — the aircraft is now one confirmed-good component closer to the answer.