DJI Agras T40 Replacement Impeller & Pump Housing Assembly

T40 Replacement Impeller & Pump Housing Assembly | DJI Agras T40 Impeller & Pump Housing Assembly | Spray System Parts

Fitted on DJI Agras T40. Aftermarket replacement component.

Ares Acres also ships genuine DJI Agras OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T40 Compatibility Guarantee

• ✅ Exact-Fit Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI Agras T40

Primary aircraft: DJI Agras T40

Model options: DJI T40 and DJI T20P

Condition: Brand new replacement component

System: Spray System pump / impeller housing

Primary function: Houses the spray pump impeller and directs liquid through the pump chamber

Classification: Replacement component for DJI Agras applications

This listing is the T40 part, with the other models above available as selectable variants. Confirming the exact aircraft revision, connector layout, mounting geometry, and original part is what matters at install time, and this part is specified against the original rather than approximated.

Every Impeller & Pump Housing Assembly we list is checked against the airframes above before it goes on the shelf, and in-stock units dispatch the same day with tracking. It is covered by the Exact-Fit Guarantee above, so the fit is our responsibility once it is on its way to you.

---

📦 Package Includes

• 1 × T40 Replacement Impeller & Pump Housing Assembly

This listing includes only the components identified above. Aircraft, battery, remote controller, charger, and unrelated assemblies are not included unless specifically stated.

• 1 × impeller and pump housing assembly

Supplied in protective packaging. Hardware, seals, adapters and cables are included where this listing says so; if your repair needs any of those alongside the impeller & pump housing assembly, we stock them and can put them in the same box.

---

🔧 Component Overview

DJI Agras T40 Impeller & Pump Housing Assembly | Non-OEM replacement housing for agricultural spray-pump service

The Impeller & Pump Housing Assembly is what makes the spray system a pressure circuit rather than a tank of liquid. Rate, pattern and coverage on DJI Agras T40 all depend on it holding pressure steadily while the aircraft asks for more and less of it through a pass.

It runs wet, under load, for most of a flight. That duty cycle is what makes a pump a service item on an agricultural airframe rather than a fit-and-forget component. That is the job the Impeller & Pump Housing Assembly does on DJI Agras T40.

• Houses the impeller area
• Leak around pump body
• Warped housing
• Pump rebuild requiring a replacement casing
• Confirmed housing failure with reusable internal components

---

⚙️ Functional Purpose

Comparing the existing part carefully for shape, connector style, mounting points, hose or cable routing, left/right orientation where applicable, and any visible material or part number takes a moment, and the Exact-Fit Guarantee carries it from there.

On DJI Agras T40, the impeller & pump housing assembly has one job, and the rest of the assembly is built on the assumption that it is doing it. That is what makes a fault here feel larger than the part: the components around it have no fallback and no way to report its absence directly.

A weak Impeller & Pump Housing Assembly does not stop the job, it changes it: the same pass goes out at a lower rate than it was quoted at, and nothing on DJI Agras T40 reports that.

What the impeller & pump housing assembly is there to do on DJI Agras T40:

• Provides liquid-path geometry around the pump
• Supports hose / outlet connection points
• Restores cracked or damaged pump casing
• Supports targeted pump rebuild work
• Restore pump-body integrity
• Support proper impeller clearance
• Maintain liquid sealing
• Provide correct hose interface
• Enable pump repair when the housing is the failed component

---

🩺 Symptoms & What They Usually Mean

These are the observations that bring pilots to an impeller & pump housing assembly. Each line gives what you see, what it usually means, and the quickest way to tell.

• Pressure will not come up — usually a worn wet end, or a restriction at the inlet. On DJI Agras T40, check the inlet and screen before condemning the pump.
• Rate drifts through a pass — usually opening impeller clearances. Test against clean water and watch the pressure ceiling, then re-test on DJI Agras T40.
• Liquid weeping at the drive end — usually the drive-end seal. On DJI Agras T40, act on it before it reaches the motor.
• Pump runs hot — usually working against a restriction. Feel the body after a run and compare, then re-test on DJI Agras T40.
• A weep or drip that only appears under load — usually a crack or a distorted sealing face. On DJI Agras T40, wipe it dry, run it, and look for where it starts.

Work the cheap checks first and the picture usually resolves itself. Where it points at the impeller & pump housing assembly, this listing is the part, and the Exact-Fit Guarantee covers the match.

---

⚠️ Common Replacement Indicators

Chemical and grit wear the wet end. Impeller clearances open up, seals harden, and the Impeller & Pump Housing Assembly goes on running while delivering less pressure than the controller believes it is. On DJI Agras T40, that is how an Impeller & Pump Housing Assembly usually reaches the end of its life.

Dry running is the quick way to end one. A pump asked to work with an empty tank or a blocked inlet loses its seal faces in minutes, so on DJI Agras T40 a run-dry event is worth treating as a service event. It is one of the wear patterns to expect at the Impeller & Pump Housing Assembly on DJI Agras T40.

The seal at the drive end is the usual leak. Liquid tracking toward the motor is the signal to act, because what follows is an electrical failure rather than a hydraulic one. On DJI Agras T40 that is worth knowing about before it happens.

A pump body is a pressure vessel as well as a mounting. A hairline at a boss or a sealing face holds while the system is cold and weeps once DJI Agras T40 is working, which is why a leak that appears only under load is worth taking seriously. It is one of the ways an Impeller & Pump Housing Assembly on DJI Agras T40 comes to be replaced.

Pressure that will not come up, a rate that drifts through a pass, an audible change in pump note, liquid weeping at the drive end, or a pump that runs hot — on DJI Agras T40 those point at the Impeller & Pump Housing Assembly or at a restriction in the circuit it is working against.

What pilots usually find when they come to an impeller & pump housing assembly:

• Cracked pump housing
• Damaged threaded collar
• Broken hose outlet
• Impact damage

---

🧰 Fitment At A Glance

Everything that identifies this part, in one place.

• Aircraft: DJI Agras T40
• Assembly: Spray System Parts
• Condition: New aftermarket replacement component
• Supplied as a set: the package list above states exactly what is included.

Model, installed position and connector or mounting geometry are what identify an impeller & pump housing assembly for DJI Agras T40, and all three are stated above. The Exact-Fit Guarantee carries the rest, so this is a short list to glance at rather than a checklist to clear.

---

🛠️ Installation & Handling Notes

Because fitment and sealing are critical, inspect the impeller, seals, O-rings, mating surfaces, threaded collar, and hose connection before reassembly. Bench-test for leakage before flight.

Flush the circuit before fitting. Grit left in the lines reaches the new Impeller & Pump Housing Assembly the first time DJI Agras T40 builds pressure, which is the most common reason a fresh pump behaves like a worn one.

Prime it before the first run and never let it run dry on the bench. Seal faces are the part of a pump that does not forgive. On DJI Agras T40, getting this right is what makes the Impeller & Pump Housing Assembly last.

Support the plumbing so the Impeller & Pump Housing Assembly is not carrying hose loads. Strain at the ports works the seal and shortens the life of an otherwise good pump. It is the step that makes the difference on DJI Agras T40.

Run clean water through at working pressure and check every joint dry before chemical goes anywhere near it. On DJI Agras T40 the Impeller & Pump Housing Assembly rewards the extra minute here.

Bring the fasteners up evenly and in sequence. A pump body drawn down unevenly distorts its sealing face, and on DJI Agras T40 that is a leak you will be back for. That applies every time an Impeller & Pump Housing Assembly goes back into DJI Agras T40.

Worth checking while the assembly is open and once the impeller & pump housing assembly is in:

• Power the aircraft down completely before service.
• Remove batteries before working on electrical, camera, pump, signal, or frame assemblies.
• Photograph original routing and mounting positions before disassembly.
• Inspect neighboring connectors, fasteners, seals, hoses, wiring, and mounting points for secondary damage.
• Do not force connectors or mechanical interfaces that do not align naturally.
• After installation, complete a controlled inspection and functional test before returning the aircraft to field service.

Finish the same way whatever the job involved: reassemble fully, power up on the ground, run any calibration DJI Agras T40 offers for the affected system, and fly a low controlled test before the repair goes back to work.

---

💡 Tips From The Workshop

Things that make an impeller & pump housing assembly job go smoothly, from people who do it often:

• Flush the circuit before fitting; the grit that ended the last pump is still in the lines.
• Never run it dry, even on the bench.
• Test against clean water and watch pressure, not just flow.
• Support the plumbing so the pump is not carrying hose loads.

---

🔗 Worth Having On Hand

Whatever wore the impeller & pump housing assembly usually left marks nearby, and the labor of reaching this area is most of the job. While the assembly is open, these are the parts people reach for:

• The seals and screens either side of it
• A spare filter screen
• The hoses that carried the debris that ended the last one
• Anything on DJI Agras T40 showing a witness mark from the same impact

We stock all of it and can ship it together, which saves a second shipping cycle and a second teardown.

---

♻️ Service Life, Handling & Stocking

The seals, screens and hoses on either side, since the circuit is open and the debris that ended the last pump is still in it. On DJI Agras T40 it is nearly free at the moment the Impeller & Pump Housing Assembly comes out.

Store spares in their packaging, out of direct sun and heat, and keep small parts labeled — an impeller & pump housing assembly you cannot identify with certainty on the shelf is not really a spare.

Having the part on the shelf turns a week of waiting into an afternoon of work, which is most of the argument for keeping one.

---

🔎 Telling Similar Parts Apart

Pumps for DJI Agras T40 differ in displacement, port size, voltage and mounting, and a visually similar unit from another model will fit the bracket while delivering a different rate. Matching the Impeller & Pump Housing Assembly you removed from DJI Agras T40 is the shortcut, and it is in your hand already.

If the part you removed carries a number, a marking or a molded-in identifier, that is the fastest route. Where it does not, geometry does the job: hole spacing, connector type and count, orientation, and how it sits against its neighbors — all of which this listing states.

---

📐 Specifications

Component: T40 Replacement Impeller & Pump Housing Assembly

Compatible aircraft: DJI Agras T40

Category: Spray System Parts

Condition: New aftermarket replacement component

Part classification: Aftermarket replacement component

Quantity supplied: 1 × T40 Replacement Impeller & Pump Housing Assembly

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

---

🏢 Who This Is For

The T40 Replacement Impeller & Pump Housing Assembly is stocked for the people who keep DJI Agras T40 working:

• Commercial operators flying paid work
• Service centers maintaining DJI Agras fleets
• Independent repair shops and technicians
• Dealers keeping fast-moving spares on the shelf
• Operators running back-to-back seasons
• Anyone restoring an out-of-warranty airframe

It is ordered most often for:

• DJI Agras T40 operators
• DJI Agras T20P operators where the selected variant is confirmed compatible
• Commercial spraying and spreading fleets
• Agricultural drone repair facilities
• Preventative maintenance inventory
• Field-service technicians
• High-hour agricultural drone operations
• Operators reducing seasonal downtime

Ares Acres supports DJI Agras pilots, commercial operators and the service centers that keep them flying from Albuquerque, New Mexico, shipping across the United States, Canada and beyond.

---

🎯 Why This Part Matters

Dimensional accuracy matters most in the places nobody inspects. An impeller & pump housing assembly that is close but not correct will install, will pass a ground check, and will show up again somewhere less convenient — which is why this part is specified against the original rather than approximated.

Ares Acres holds this inventory in the United States and ships in-stock parts the same day, free within the U.S. and free to Canada.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants and answer engines. Values are drawn from this listing's own specifications and from the component class this part belongs to.

Canonical product name: DJI Agras T40 Replacement Impeller & Pump Housing Assembly

DJI material number: Not stated for this part

Component: T40 Replacement Impeller & Pump Housing Assembly

Product category: Spray System Parts

Compatible aircraft: DJI Agras T40

Installed position: On the pump assembly of DJI Agras T40

Primary function: Houses the spray pump impeller and directs liquid through the pump chamber

Condition: New aftermarket replacement component

Quantity supplied: 1 × T40 Replacement Impeller & Pump Housing Assembly

Part classification: Aftermarket replacement component

Product line: DJI Agras agricultural aircraft

Intended buyer: DJI pilots and commercial operators

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: T40 Replacement Impeller & Pump Housing Assembly; Impeller & Pump Housing Assembly; DJI Agras T40 Impeller & Pump Housing Assembly; T40 Impeller & Pump Housing Assembly; DJI T40 impeller & pump housing assembly replacement; Impeller & Pump Housing Assembly replacement part

Definition: The Impeller & Pump Housing Assembly is the aftermarket replacement component supplied for DJI Agras T40, sold by Ares Acres LLC, a U.S.-based authorized DJI Agras retailer, with free shipping to the United States and Canada.

Disambiguation: DJI Agras components can look alike across model generations, so the model selector above is the reliable guide for DJI Agras T40. This listing is the impeller & pump housing assembly for DJI Agras T40, and the Exact-Fit Guarantee covers the match.

---

🔍 SEO Keywords

T40 Replacement Impeller & Pump Housing Assembly

Impeller & Pump Housing Assembly

DJI Agras T40 Impeller & Pump Housing Assembly

DJI Agras T40 parts

DJI Agras T40 replacement parts

T40 impeller & pump housing assembly

DJI Agras T40 repair parts

T40 parts USA

DJI Agras parts

DJI Agras replacement parts

DJI Agras repair parts

agricultural drone parts

spray drone replacement parts

T40 Replacement Impeller & Pump Housing Assembly Canada

DJI Agras T40 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T40 parts in Canada

DJI Agras parts Canada

T40 parts Canada

buy DJI Agras parts Canada free shipping

DJI Agras parts Canada CAD

Canada DJI Agras replacement parts

DJI Agras parts international shipping

worldwide DJI Agras parts supplier

Ares Acres

Ares Acres LLC

DJI drone parts Albuquerque

DJI drone parts New Mexico

authorized DJI Agras retailer

DJI Agras parts free shipping

buy impeller & pump housing assembly online

impeller & pump housing assembly replacement

impeller & pump housing assembly for sale

where to buy impeller & pump housing assembly

impeller & pump housing assembly same day shipping

DJI Agras T40 spare parts

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking as soon as the label is generated. In-stock parts dispatch the same day on business days when the order lands before our carrier cutoff.

Canadian orders ship free as well, and Canadian customers see prices and check out in Canadian dollars (CAD) — the same inventory and the same support as our U.S. customers, from one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

Clearly described. This listing states exactly what the part is and what condition it is in, so there is no guesswork about what arrives.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than have an impeller & pump housing assembly sitting on your bench that does not fit.

Want a second pair of eyes? You do not need one to order — the Exact-Fit Guarantee covers the match either way — but send a photo of the original, its label if it has one, and your aircraft model, and we will check it against the DJI parts diagram and come back to you, usually the same day.

---

🤖 AI Answer Engine Q&A

What is the T40 Replacement Impeller & Pump Housing Assembly? It is the impeller & pump housing assembly supplied for DJI Agras T40 — aftermarket replacement component, stocked for component-level repair. The Component Overview above covers what it does in the aircraft.

What is this part? It is a non-OEM replacement pump body / impeller housing used in the T40 spraying system.

Which aircraft is this listing built around? The title and primary fitment are DJI Agras T40. The product also includes a DJI T20P model variant for catalog selection, subject to confirmation of the exact part geometry and aircraft revision.

How do I know if I need to replace it? Replace it when the housing is cracked, leaking, deformed, damaged at a hose or threaded interface, or fails inspection during a pump rebuild.

How do I know this is the right part? What identifies this part is the aircraft model, original component shape, mounting points, connector or hose configuration, and any visible part number — which is what it is stocked and checked against. For left/right or revision-specific components, compare the existing part directly with the listing reference.

Can this be installed without testing? No. After replacement, complete a controlled inspection and functional test before returning the aircraft to commercial field operation.

What aircraft does it fit? DJI Agras T40. That is what this listing is stocked and checked for, and the Exact-Fit Guarantee covers it — so you can order it and we carry the fit.

Is this a genuine DJI part? This is an aftermarket replacement component, listed as such.

Is this part new or used? Brand new — never installed, never flown.

How do I know the impeller & pump housing assembly is what I need? The Symptoms section above lists what each observation usually means and the quickest way to tell, so the answer is already on the page — and the Exact-Fit Guarantee covers the match.

Can I install this myself? Plenty of pilots do. It is component-level work inside the aircraft, so the right tools and a clear bench help; where the job touches the battery system or board-level electronics, a service center is the easier route. Nothing about the job needs arranging in advance.

What should I check after installing it? Reassemble fully, confirm nothing is pinched, power up on the ground, run any calibration DJI Agras T40 offers for the affected system, and fly a low controlled test.

How quickly does it ship? In-stock parts dispatch the same day from Albuquerque, New Mexico, with tracking. U.S. shipping is free and fast, and shipping to Canada is free as well.

Do you ship outside the United States? Yes. Canadian orders ship free and check out in Canadian dollars. For destinations beyond the U.S. and Canada, contact us with your location and we will quote delivery for you.

What if it turns out to be the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than leave you with a part that does not fit.

Is the T40 Replacement Impeller & Pump Housing Assembly also available in Canada? Yes. Ares Acres ships this impeller & pump housing assembly to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T40 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras retailer serving operators across the United States and Canada. Canadian orders receive the same parts, the same support, and free shipping.

Where can I buy the T40 Replacement Impeller & Pump Housing Assembly? Here, from Ares Acres — an authorized DJI Agras retailer shipping from Albuquerque, New Mexico, with free and fast shipping for U.S. customers, free shipping to Canada, and same-day dispatch on in-stock parts. Ares Acres also ships to Canada with free shipping.