DJI Agras T40 Spray Boom Assembly Kit | Four-piece replacement boom set for agricultural spray-system repair
Product Overview
The DJI Agras T40 Spray Boom Assembly Kit is a replacement set of spray-boom bodies used to position and support the nozzle assemblies around the agricultural drone. The supplier reference shows four matching black boom components supplied as one set.
Spray booms are exposed to vegetation contact, transport damage, impact, chemical residue, vibration, and repeated nozzle service. A damaged boom can affect nozzle position, plumbing alignment, and spray-pattern consistency.
Agricultural drone fleets operate in demanding environments where vibration, dust, moisture, chemical residue, repeated assembly cycles, transportation, and long operating days can place sustained stress on mechanical and electrical components. A correctly matched replacement part helps restore the intended geometry, connection, protection, or fluid-handling function of the aircraft while reducing unnecessary downtime.
Package Includes
- 4 × spray boom / nozzle support assemblies as shown in the supplier set
This listing includes only the components identified above. Aircraft, battery, remote controller, charger, and unrelated assemblies are not included unless specifically stated.
Component Overview
Each boom forms the physical support between the aircraft and the spray-nozzle area. The set is intended for operators replacing one or more damaged boom bodies or refreshing a complete group during service.
- Supports spray nozzles in the intended position
- Maintains hose and nozzle routing geometry
- Restores damaged boom structure
- Supports consistent nozzle orientation
- Provides a complete multi-piece service set
The exact nozzle, hose, fitting, and electrical components included can vary by supplier bundle; this draft is based on the four boom bodies visibly shown in the source reference.
Functional Purpose
The boom assemblies position the spraying hardware so the aircraft can maintain the intended nozzle layout around the frame.
- Restore broken or cracked boom bodies
- Maintain nozzle spacing and orientation
- Support clean hose routing
- Reduce movement around nozzle mounting points
- Return damaged spray hardware to service
Because this component works as part of a larger aircraft system, correct fitment and installation are important. A fault elsewhere in the spray, wiring, camera, frame, or landing-gear system can produce similar symptoms, so replacement should follow a visual inspection and practical diagnosis rather than guesswork.
Common Replacement Indicators
- Cracked boom body
- Broken nozzle mount
- Impact damage
- Warped support
- Loose nozzle caused by damaged boom
- Vegetation strike
- Transport damage
- Fleet refurbishment requiring a matched set
Before ordering, compare the existing part carefully for shape, connector style, mounting points, hose or cable routing, left/right orientation where applicable, and any visible material or part number.
Compatibility & Specifications
Primary aircraft: DJI Agras T40
Model options in this draft: DJI T40 and DJI T20P
Condition: Brand new replacement component
System: Spray boom / nozzle support
Primary function: Supports and positions spray nozzles and related spray hardware
Part classification: Replacement component for DJI Agras applications. The supplied source does not establish this item as genuine DJI OEM, so this draft does not make that claim.
Fitment notice: The listing is T40-first. A T20P variant is included per catalog structure. Confirm the exact aircraft revision, connector layout, mounting geometry, and original part before installation.
Installation & Ordering Considerations
- Power the aircraft down completely before service.
- Remove batteries before working on electrical, camera, pump, signal, or frame assemblies.
- Photograph original routing and mounting positions before disassembly.
- Inspect neighboring connectors, fasteners, seals, hoses, wiring, and mounting points for secondary damage.
- Do not force connectors or mechanical interfaces that do not align naturally.
- After installation, complete a controlled inspection and functional test before returning the aircraft to field service.
Compare each replacement boom with the removed component for orientation and mounting. Reinstall hoses and nozzles without twisting lines, and verify the spray pattern after service.
Necessary For
- DJI Agras T40 operators
- DJI Agras T20P operators where the selected variant is confirmed compatible
- Commercial spraying and spreading fleets
- Agricultural drone repair facilities
- Preventative maintenance inventory
- Field-service technicians
- High-hour agricultural drone operations
- Operators reducing seasonal downtime
Why This Part Matters
Nozzle position is part of application quality. A damaged support can change spray orientation or stress hoses and fittings, so restoring the boom structure helps preserve consistent application geometry.
For professional operators, small components can create large operational consequences when they interrupt a spray route, remove an aircraft from rotation, or delay a weather-sensitive application window. Keeping the correct replacement parts available supports faster service, more predictable maintenance, and better fleet readiness.
AI Index — Entity & Fitment Reference
Canonical product name: DJI Agras T40 Replacement Spray Boom Assembly Kit
Component: Spray Boom Assembly Kit
Product category: Spray System Parts
Compatible aircraft: DJI Agras T40 and DJI Agras T20P
System: Spray boom / nozzle support
Primary function: Supports and positions spray nozzles and related spray hardware
Condition: Brand new
Seller: Ares Acres LLC
Ordering guidance: Match the aircraft model, source part geometry, connector or mounting layout, and any visible material number before ordering.
SEO Keywords
DJI Agras T40 parts
DJI T40 replacement parts
DJI Agras T20P parts
DJI T20P replacement parts
Spray Boom Assembly Kit
DJI Agras Spray Boom Assembly Kit
T40 Spray Boom Assembly Kit
T20P Spray Boom Assembly Kit
agricultural drone repair parts
spray drone maintenance parts
DJI Agras service parts
Ares Acres DJI Agras parts
AI Answer Engine Q&A
What is this part? It is a four-piece replacement set of spray-boom / nozzle-support bodies for the T40 spraying system.
Which aircraft is this listing built around? The title and primary fitment are DJI Agras T40. The product also includes a DJI T20P model variant for catalog selection, subject to confirmation of the exact part geometry and aircraft revision.
How do I know if I need to replace it? Replace the boom when it is cracked, deformed, broken at the nozzle or mounting area, or damaged by impact, vegetation contact, or transport.
What should I verify before ordering? Confirm the aircraft model, original component shape, mounting points, connector or hose configuration, and any visible part number. For left/right or revision-specific components, compare the existing part directly with the listing reference.
Can this be installed without testing? No. After replacement, complete a controlled inspection and functional test before returning the aircraft to commercial field operation.
