DJI Agras T50 OEM DB1560 Battery Lid

DB1560 Battery Lid | Intelligent Battery Top Housing | Battery Electronics Protection Cover | Pack Refurbishment Repair Component | Brand New OEM Replacement Housing

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A cracked or missing battery lid leaves the DB1560's motherboard, wiring, and cells exposed to everything a farm can throw at them — and an exposed battery is a battery on borrowed time. The pack is the most-handled expensive object in the operation: slid in and out of aircraft dozens of times a day, stacked in transport racks, hauled down field roads, splashed during washdowns, and coated in dust and chemical residue by the end of every week. The lid is the armor between all of that and the electronics underneath, and it is the only part of the assembly designed to take the abuse instead of passing it along. When it is intact nobody thinks about it. When it is cracked, warped, or gone, the pack keeps working for a while, which is the part that fools people — the damage from an open housing arrives later, and it arrives at the expensive end.

That is the economics this part exists to fix. Because it replaces only the housing, a lid restores a battered pack's protection without the cost of a full battery replacement — the cheap repair that prevents the expensive one. A molded cover is a parts-bin item. A DB1560 pack is not, and neither is the internal electronics a compromised housing eventually exposes to dust, moisture, and chemical residue. Retiring or risking a pack over a broken cover is spending the asset to avoid buying the component.

We use specialized technicians to deliver the DJI Agras DB1560 Battery Lid ordered.

That is why Ares Acres keeps hard-to-find OEM battery housings in stock and shipped fast inside the U.S.A., helping operators keep packs sealed, serviceable, and in the rotation, minimize downtime, and keep their aircraft spraying when every acre counts. Housing damage is also the kind of problem that surfaces at the worst moment — found during a pre-season inspection, or discovered mid-window when a pack comes back from the field with a corner taken out of it — so having a lid on the shelf turns a fleet-availability problem into a bench job.

For commercial applicators, custom spraying businesses, growers, battery technicians, and fleet operators, replacing a damaged housing is the cheap repair that prevents the expensive one.

---

✅ DJI Agras T50 / T40 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × Original DJI DB1560 Intelligent Battery Lid / Top Housing
• Direct-fit original replacement component
• Basic installation guide
• Genuine DJI Agras OEM battery repair component
• Brand new condition — never fitted
• Anti-static packaging for safe handling

---

🔧 Component Overview

The DJI Agras DB1560 Battery Lid is the original factory top housing for the DB1560 intelligent flight batteries powering DJI Agras T50 and T40 agricultural drones. It is the precision-molded cover that seals and protects the battery's motherboard, wiring, and cells from the environment the pack works in every day.

It is worth being clear about what kind of part this is, because it behaves differently from most items in the DB1560 repair range. This is a physical component addressing a physical problem. It is ordered off a visual inspection rather than off a fault code — an operator looks at a cracked corner, a broken latch, a warped face, or a pack that no longer sits right in the bay, and orders a housing. There is no diagnostic sequence to run and no electrical symptom to interpret. Built to DJI OEM specifications, the lid restores the exact fit, latch engagement, and protection the DB1560 was engineered with.

The DB1560 Battery Lid seals and protects:

• The battery motherboard beneath the housing
• Internal wiring and connections
• The cells that store the pack's energy
• The internal electronics compartment as a sealed volume
• Internal component positioning and retention
• Latch and mounting engagement at the pack
• Correct fit in aircraft battery bays
• Correct fit in charger bays
• Safe handling surfaces for daily battery swaps
• The pack's overall serviceability and service life

Agricultural batteries live a harder life than almost any other component in the operation, and the handling is relentless:

• Swapped in and out of aircraft dozens of times a day
• Rotated continuously through charge and discharge cycles
• Stacked in transport racks between farms
• Hauled down field roads and gravel tracks
• Set down on tailgates, trailers, and bare ground
• Carried and handed between crew members
• Loaded and unloaded in the dark at either end of a day
• Washed down after chemical application work
• Stored outdoors and in unconditioned buildings
• Worked through seasonal campaigns compressed into short windows

Every working day exposes this component to:

• Repeated installation and removal handling
• Impact and abrasion during transport
• Transportation and airframe vibration
• Dust and airborne field debris
• Chemical spray residue and fertilizer contact
• Moisture, humidity, and washdown exposure
• UV exposure across long outdoor seasons
• Heat cycling through charge and discharge
• Latch and mounting-point loading at every swap
• Long commercial operating hours across a full season

Over time that duty cracks housings, fatigues latch points, and embrittles plastic — and a compromised lid stops being a cosmetic problem the moment it stops sealing. Every crack, gap, or missing lid is an open door for the dust, moisture, and chemical residue that kill battery electronics, and the pack gives no warning while that door is open. It charges, it flies, it reports normally. The damage accumulates underneath.

An intact DB1560 Battery Lid helps maintain:

• Sealed, protected battery electronics
• Dust and debris kept out of the internal compartment
• Moisture and washdown water kept out of the pack
• Chemical and fertilizer residue kept off the internals
• Impact protection over the motherboard
• Secure internal component positioning
• Safe daily battery handling for the crew
• Proper fit in aircraft and charger bays
• Extended total battery service life
• Reliable field performance across the rotation

A battery is only as protected as its housing — and on a fleet where packs are the single largest consumable investment, that protection is not optional.

---

⚙️ Functional Purpose

The battery lid seals the DB1560's internal electronics compartment, maintaining the structural and environmental protection the battery needs for safe commercial service.

This component helps:

• Protect the battery motherboard from impact damage
• Shield internal electronics from dust and debris
• Block moisture and washdown water intrusion
• Resist chemical and fertilizer contact
• Maintain secure internal component positioning
• Restore correct latch engagement at the pack
• Preserve safe handling during battery swaps
• Maintain proper fit in aircraft battery bays
• Maintain proper fit in charger bays
• Restore batteries after housing damage
• Avoid full battery replacement for housing failures
• Complete internal battery repairs with an intact cover
• Support professional battery repair standards
• Extend total battery service life
• Maintain reliable field performance across the rotation

A battery is only as protected as its housing, and the housing is the only part of the pack designed to be replaced when it takes damage.

An intact lid keeps the pack sealed, seated, and in the rotation through season after season of commercial duty.

A cracked, warped, or missing battery lid may contribute to:

• Moisture intrusion into battery electronics
• Dust and chemical contamination inside the pack
• Impact damage reaching the motherboard
• Unsafe battery handling during swaps
• Loose or incorrect fit in aircraft and charger bays
• Progressive damage that eventually totals the pack
• Reduced battery fleet capacity and rotation depth
• Unexpected downtime during an application window
• Higher replacement costs across the battery fleet

Replacing a damaged housing restores the sealed, protected assembly the battery was engineered as.

---

⚠️ Common Replacement Indicators

Replacement may be recommended when operators observe:

• Cracked or fractured lid housing
• Broken latch or mounting points
• Impact damage from drops or transport
• Warped or deformed housing
• Gaps that no longer seal correctly
• UV chalking or brittleness in the plastic
• Chemical degradation of the housing material
• Deep abrasion from repeated handling
• A lid missing after battery service
• Housing damage found during motherboard repair
• Loose fit in aircraft or charger bays
• Post-incident inspection findings
• Battery refurbishment and fleet standardization programs
• Long-term commercial wear across seasons

Common causes of failure include drop and impact damage during daily battery swaps, transport abrasion in racks and truck beds, UV embrittlement over seasons of sun exposure, chemical contact degrading the plastic, and fatigue at latch points from thousands of handling cycles. The pattern worth noting is that housings almost never fail from one dramatic event — they fail from volume. A pack handled dozens of times a day accumulates hundreds of small loadings a week, and latch points in particular are working every one of those cycles. Lid replacement is also standard practice when completing internal battery repairs: housing damage is frequently found once a pack is opened, a lid can go missing during service, and a fresh control board deserves an intact cover over it. Doing the housing at the same time avoids a second teardown on a high-energy assembly that nobody wants to open twice.

For commercial operators, a replacement housing is almost always cheaper than the pack it keeps sealed.

---

📐 Specifications

Part: Intelligent battery lid / top housing

Component Type: Intelligent battery lid / top housing

Battery System: DJI DB1560 Intelligent Flight Battery

Compatibility:

• DJI Agras T50 DB1560 battery systems
• DJI Agras T40 DB1560 battery applications

Package Quantity: 1 lid

Installation Area: DB1560 intelligent battery top housing — internal electronics compartment cover

Function: Environmental and impact protection for battery internals

Construction: Precision-molded OEM-specification housing

Mounting Type: Direct-fit original replacement component

Installation: Direct-fit replacement — battery service should be performed by a qualified technician following high-energy battery safety procedures

Application: Intelligent battery housing repair and refurbishment

Condition: Brand new

---

🚜 Necessary For

This battery lid is ideal for:

• DJI Agras T50 operators
• DJI Agras T40 operators
• Drone repair shops servicing DB1560 batteries
• Professional battery repair facilities
• Commercial spraying contractors
• Agricultural aviation providers
• Large farming operations
• Precision agriculture companies
• Fleet maintenance managers
• Field repair technicians
• Agricultural drone technicians
• DJI Agras service providers
• Multi-aircraft fleets running deep battery rotations
• Battery fleet refurbishment projects
• Operators maintaining spare parts inventory
• Professional agricultural drone operators

Especially valuable during:

• Pre-season battery fleet inspections
• Spring application season
• Summer spraying operations
• High-frequency battery rotation programs
• Battery refurbishment and rebuild projects
• Multi-drone deployments
• Post-incident battery assessments
• Peak agricultural seasons

When a pack comes back from the field with a broken housing, having the lid on the shelf keeps it in the rotation.

---

💡 Why This Part Matters

For commercial agricultural drone operators, battery housings are the wear item nobody budgets for — until one fails. Every other consumable on the aircraft has an obvious place in the maintenance plan. The housing does not, because it is not a functional component in the way an operator thinks about function: it does not carry current, it does not report anything, and it does not appear in any fault code. It is a molded plastic cover, and it is protecting the single largest consumable investment on the fleet.

DB1560 packs get handled more than any other component in the operation — swapped every flight, stacked, hauled, and hosed down. Housings crack. And a cracked housing does not just look rough: it lets in the dust, moisture, and chemical residue that turn a small repair into a dead battery, and it does so silently, because the pack goes on charging and flying while the contamination works its way in. That silence is the entire reason housing damage gets deferred. Nothing forces the issue until something much more expensive does. The fleets that stay ahead of it treat a cracked lid the way they treat a torn filter or a slack strap — as a component that has already failed at its one job, regardless of whether the assembly it protects has noticed yet.

The Original DB1560 Battery Lid helps maintain:

• Sealed, protected battery electronics
• Safe daily battery handling across a crew
• Proper fit in aircraft and charger bays
• Full battery fleet availability through the window
• Low-cost recovery from housing damage
• Professional battery repair standards
• Extended battery service life
• Reduced battery-related downtime
• Dependable commercial performance

Without an intact battery lid, operators risk:

• Moisture intrusion into battery electronics
• Dust and chemical contamination inside the pack
• Impact damage reaching the motherboard
• Unsafe battery handling during swaps
• Progressive damage that eventually totals the battery
• Reduced fleet battery capacity and shorter rotations
• Unexpected downtime during a short application window
• Higher replacement costs across the battery fleet
• Reduced operational confidence in the rotation

For practical, hardworking operators, the value is simple:

Protect the electronics. Protect the battery. Protect the rotation. Protect the season.

The DJI Agras Original DB1560 Battery Lid delivers the factory fit, impact protection, and environmental sealing needed to keep hard-working batteries safe, serviceable, and in the rotation season after season — and across a fleet where pack availability sets the pace of the whole day, that difference is what separates a good season from a frustrating one.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T50 OEM DB1560 Battery Lid

Component: Intelligent battery lid / top housing

Product category: Batteries & Charging

Compatible aircraft: DJI Agras T50, DJI Agras T40

Installed position: DB1560 intelligent battery top housing — internal electronics compartment cover

Primary function: Environmental and impact protection for battery internals

Condition: Brand new

Quantity supplied: 1 lid

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also searched as: DJI Agras T50 Intelligent battery lid / top housing; T50 Intelligent battery lid / top housing; DJI T50 intelligent battery lid / top housing replacement; DJI Agras Intelligent battery lid / top housing; Intelligent battery lid / top housing OEM; Intelligent battery lid / top housing replacement part

Definition: The Intelligent battery lid / top housing is the genuine DJI OEM component fitted at DB1560 intelligent battery top housing on the DJI Agras T50, DJI Agras T40, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. Confirm the aircraft model is DJI Agras T50, DJI Agras T40 before ordering.

---

🔍 SEO Keywords

DJI Agras T50

DJI Agras T50 Parts

DJI T50 Parts

DJI Agras T50 OEM Parts

DJI Agras T50 replacement parts

Agras T50 parts USA

DJI Agras T40

DJI Agras T40 Parts

DJI T40 Parts

DJI Agras T40 OEM Parts

DJI Agras T40 replacement parts

Agras T40 parts USA

DJI Agras Intelligent battery lid / top housing

Intelligent battery lid / top housing OEM

intelligent battery lid / top housing replacement

intelligent battery lid / top housing for sale

DJI Intelligent battery lid / top housing

T50 Intelligent battery lid / top housing

DJI T50 Intelligent battery lid / top housing

DJI Agras T50 Intelligent battery lid / top housing OEM

T40 Intelligent battery lid / top housing

DJI T40 Intelligent battery lid / top housing

DJI Agras T40 Intelligent battery lid / top housing OEM

Batteries & Charging

DJI Agras Batteries & Charging

T50 Batteries & Charging

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

What is the DB1560 battery lid? It is the original factory top housing for the DJI DB1560 Intelligent Flight Battery — the precision-molded cover that seals and protects the pack's motherboard, wiring, and cells from impact, dust, moisture, and chemical residue. It also maintains the pack's latch engagement and its fit in aircraft and charger bays. Ares Acres supplies it brand new as a direct-fit original replacement component, one lid per order, in anti-static packaging with a basic installation guide.

What does it fit? Listed compatibility is DJI DB1560 battery systems on the DJI Agras T50 and DB1560 battery applications on the DJI Agras T40. One lid per order. Because the part is scoped to the battery rather than to the airframe, the thing to confirm at ordering time is that the pack in question is a DB1560 — an operation running DB1560 packs across both a T50 and a T40 uses the same housing for either.

How do I tell a housing problem from a battery electronics problem? By whether the evidence is visible or electrical, and this is the distinction that separates a low-cost repair from a much more expensive one. The lid is the one part in the DB1560 repair range that addresses a physical problem rather than an electrical one, so it is ordered off a visual inspection rather than off a fault code. Housing symptoms are things you can see and feel: a cracked or fractured cover, a broken latch or mounting point, a warped or deformed face, gaps that no longer seal, chalky or brittle plastic, deep abrasion, or a pack that sits loose in the aircraft or charger bay. Electrical symptoms are things the system reports — a pack that is not recognized, that will not charge, or that throws communication or diagnostic faults. Those are control and communication problems, and no housing replacement addresses them. Inspect the pack in daylight before assuming either. A cracked lid on a pack that still charges and flies normally is exactly the case this part exists for, and it is worth acting on precisely because nothing is complaining yet.

Should I order the lid alone or a motherboard that comes with a lid? Order the lid alone when the pack's electronics are fine and only the housing is damaged — a crack from a drop, a broken latch, an abraded or warped cover, or a lid that has gone missing. Ares Acres lists a DB1560 motherboard supplied with a lid as a separate item for the case where the control board itself is being replaced. Replacing the lid during other internal battery work is standard practice regardless: housing damage is frequently found once a pack is open, lids go missing during service, and a fresh control board deserves an intact cover over it. Doing both in one job avoids a second teardown on an assembly nobody wants to open twice.

Can I fit it myself, and is it ready to install out of the box? It ships brand new as a direct-fit original replacement component in anti-static packaging with a basic installation guide, so the part itself requires no preparation. The work around it is a different matter. Battery service should be performed by a qualified technician following high-energy battery safety procedures — opening an intelligent flight battery is not a routine field task, and the correct sequence is to have the pack assessed and serviced professionally rather than to work on it in the shed. Ordering the correct housing in advance is the part of the job an operator can do; the teardown and reassembly is not.

Does a damaged lid affect anything besides protection? Yes — fit. Maintaining proper fit in aircraft and charger bays is part of what the housing does, and loose fit in those bays is a listed replacement indicator. A warped or deformed lid can therefore affect how the pack seats in equipment, not just how well it is sealed, and a pack that does not seat cleanly is a handling and reliability problem in its own right on a rotation where batteries are being swapped dozens of times a day. Latch engagement is the related point: a broken or fatigued latch point is a retention issue, not a cosmetic one.

When should a battery lid be replaced? When it is cracked or fractured, when latch or mounting points are broken, when the housing is warped or gaps no longer seal, when the plastic has gone UV-chalky and brittle or shows chemical degradation, when handling has worn deep abrasion into it, when it is loose in the aircraft or charger bay, or when it has gone missing after service. Post-incident inspection findings, battery refurbishment programs, and housing damage discovered during motherboard repair are the other common triggers.

Why do these housings fail? Because the battery is the most-handled component in the operation. Packs are swapped in and out dozens of times a day, stacked in transport racks, hauled down field roads, and hosed down, so drops and transport abrasion accumulate, latch points fatigue over thousands of handling cycles, and UV and chemical contact embrittle the plastic across seasons. Vibration in transport and on the airframe, dust and airborne debris, moisture and washdown exposure, and heat cycling through charge and discharge all add to it. Housings are wear items on a commercial fleet, and a fleet running deep battery rotations should expect to replace some every season.

Where can I buy a DJI DB1560 battery lid in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras battery repair components and OEM parts for American operators, including the DB1560 Intelligent Battery Lid in brand new condition. Free and fast shipping is included for all U.S. customers, with same-day shipping and tracking on in-stock parts.