DJI Agras T50 OEM Generator Controller-to-USB Board Cable (YC.XC.XX001513)

DJI Agras T50 OEM Generator Controller-to-USB Board Cable (YC.XC.XX001513) — the signal cable that connects the DJI Agras generator controller to the USB communication board, DJI material number YC.XC.XX001513. DJI generator controller cable, controller-to-USB board cable, DJI Agras OEM generator wiring.

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on fast fulfillment, responsive support, and reliable access to the parts operators need most.

We use specialized technicians to verify and dispatch the Generator Controller-to-USB Board Cable ordered.

Parts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.

That is why Ares Acres keeps hard-to-find OEM generator parts in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T50, this is the part that keeps a scheduled job on the calendar instead of on hold.

Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• DJI material number YC.XC.XX001513 — verified against the official DJI Agras generator parts list
• Supplier-listed fitment: DJI Agras generator (D-series inverter platform), controller-to-USB-board link
• Brand new condition — never installed, never run

📦 Package Includes

• 1 × Generator Controller-to-USB Board Cable (YC.XC.XX001513)

🔧 Component Overview

The DJI Agras OEM Generator Controller-to-USB Board Cable, DJI material number YC.XC.XX001513, is the harness that connects the generator controller to the USB communication board, carrying the internal data link between the two boards.

When an internal comms link goes down, this harness is the cheapest of the three things it can be and the most likely of them to have failed mechanically. The controller and the USB board are both rigidly mounted; the cable is the one element of the link that flexes, that crosses a gap between two mounting planes, and that gets handled every time somebody works inside the enclosure. Rule it in or out first, because doing so costs an inspection rather than a part.

Inspect it out of the aircraft, not in place. With both ends released, run the full length through your fingers under good light and look for the specific things that kill a signal harness: a flat or shiny wear mark where it has been resting against an edge, a clamp, or a neighboring cable; a kink that has set; insulation gone hard or glazed from heat; and stiffness right where the wires leave a connector body. That last one is the classic failure point, because flexing concentrates at the strain relief.

Test pin retention before you test continuity. Hold the connector housing and give each wire a light straight pull, one at a time. Nothing should move. A pin that slides even slightly has backed out of its lock and will lose contact under vibration while looking perfectly normal at rest. Then put a light into the connector face: a contact sitting lower than its neighbors, a bent or spread pin, or a socket splayed by a past mis-insertion all show up from the front once you know to look.

If you have a meter, check the harness end to end for continuity, then check it again while flexing it. A broken conductor inside intact insulation will often read perfectly at rest and open the moment the cable is bent at the failure point, which is exactly what a running engine does to it thousands of times a minute. Work along the length in short sections, watching the meter, and pay particular attention to the stretch immediately behind each connector. Check between adjacent conductors as well, because chafe eventually produces a short rather than an open.

Several short harnesses inside a generator enclosure look alike at a glance. Tell this one apart by its ends and its gauge rather than by its jacket: it is a signal cable, so its conductors are fine next to anything carrying output current, and both ends terminate on boards rather than on a lug or a bulkhead. Compare both connectors against the cable you removed instead of assuming the new one is reversible, and confirm the base material number on the label. Ordering a generator harness from a photograph is how operators end up with a cable that plugs in but does not reach, or that carries a different conductor count.

⚙️ Functional Purpose

The cable moves control and comms data between the generator controller and the USB board. When it chafes, corrodes, or a connector fails, the internal comms link drops — errors, no telemetry, or intermittent faults that come and go with vibration.

Routing is the part of this job that is easy to get wrong and impossible to check afterward, so record it before anything is unplugged: which clips the cable passes through, which side of a bracket it runs, whether it crosses over or under a neighboring harness, and how much slack sat at each end. On a generator, routing is not cosmetic. It is what keeps a signal cable off the hot side, out of the path of a part that moves or expands, and away from the edges that cut it. A cable refitted on a slightly different route will find a new place to wear.

Release both connectors by their latches and lift the cable out of its clips rather than dragging it out from one end. Cut any cable ties with the flat of the side cutters laid against the tie head so the blade cannot nick the harness underneath; a nicked jacket on a new-looking cable is a fault you have just built in yourself. Note which ties were factory-fitted and where they sat, because those positions are how the route gets reproduced.

Fit the new cable to its route before you plug either end in. Lay it into the clips, restore the ties at the original positions, and only then connect the ends. Working the other way round loads the connectors while you drag the cable into place, and connector housings are exactly what gets broken doing that. Leave the service loop where the original had one; a harness pulled straight and tight transmits engine vibration into the connector instead of absorbing it.

Seat each connector square and push until the latch is felt or heard, then tug lightly on the housing to confirm it holds. Do not tighten cable ties down hard on a signal harness. A tie crushed into the jacket creates a stress riser the cable will eventually break at, and it also removes the small amount of movement that lets a harness survive vibration. Snug enough that the cable cannot migrate, loose enough that you can still slide it slightly by hand.

⚠️ Common Replacement Indicators

• Comms error between the controller and USB board
• Intermittent or lost internal data link
• Dropout that comes and goes with vibration
• Visible chafe, corrosion, cut, or connector damage
• Water intrusion at a connector

Confirm before you order: this part is DJI number YC.XC.XX001513, listed for DJI Agras generator (D-series inverter platform), controller-to-USB-board link. Match it to your parts diagram or the label on your existing part before ordering.

A comms error that appears and clears with engine vibration, or that only shows up once the generator has warmed through. Thermal and vibration-dependent faults are cable and connector faults far more often than they are board faults, because a board that has failed generally stays failed.

The link works with the enclosure open and drops once everything is buttoned up. That is routing telling you something: a cable being pinched by a cover, pulled by a panel, or pressed against a fastener as the assembly closes. Look for a witness mark on the jacket before you order any part at all.

A shiny or flattened wear patch where the harness crosses an edge, a bracket, or another cable. Chafe does not stop on its own; the same relative movement that wore the jacket keeps going until it reaches copper, and what follows is usually a short between conductors rather than a clean open circuit.

Insulation that has gone stiff, hard, glazed, or crazed, particularly on the hot side of the enclosure. Heat-aged insulation loses the flexibility that lets a harness ride out vibration, and once it cracks it stops keeping moisture and conductive dust off the conductors underneath it.

Green or white crust inside a connector, a tide line on the jacket, or a plug that feels gritty going together. Fertilizer and spray residues are hygroscopic, so they hold moisture against the contacts long after the aircraft looks dry, and the corrosion that follows raises resistance in a circuit that has very little margin for it.

A connector with a broken latch, a cracked shell, or a pin that moves when you pull gently on its wire. Any of these will hold on the bench and let go in flight. A latch that no longer clicks is not a cosmetic problem on a harness that lives on a running engine.

📐 Specifications

DJI Material Number: YC.XC.XX001513

Part: Generator Controller-to-USB Board Cable

Fits: DJI Agras generator (D-series inverter platform), controller-to-USB-board link (supplier-listed fitment)

Engine: D-series inverter

Quantity: 1

Condition: Brand new

Length, conductor count, and connector keying: Not published by DJI in the public parts breakdown. Lay the new harness alongside the one you removed and compare overall length, conductor count, and the connector at each end before it goes anywhere near the enclosure. Order by material number, then verify by direct comparison rather than by eye.

Jacket and insulation rating: Not published. Do not substitute a generic signal or USB lead of similar appearance for this harness. A cable inside a generator enclosure lives in heat, vibration, fuel vapor, and chemical residue, and the jacket compound and the terminations are the part of the specification you cannot see from the outside.

Ties, clips, and routing hardware: Confirm what actually arrives against the package contents listed above rather than assuming ties, clips, or saddles are supplied. Note the position of every factory tie and clip during removal, because reproducing the original route is the part of this job that decides how long the new cable lasts.

🧰 Fitment Verification Before You Order

This listing is DJI material number YC.XC.XX001513. That number, not the description, is what makes a part match. Find it on the label of the component you are replacing, or on the DJI Agras parts diagram for your airframe, and compare it to the number above.

Revision suffixes are still the same part. DJI labels sometimes carry a trailing revision such as .01, .02, or .F. Those denote a production revision, not a different component. Match the base number and disregard the suffix.

Visually similar is not the same. DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.

Verified fitment for this listing: DJI Agras T50. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.

Not sure? Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.

---

🛠️ Installation & Handling Notes

These are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.

Power down completely and disconnect the flight batteries before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.

Photograph the assembly before you disturb it. Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the Generator Controller-to-USB Board Cable is easier to fit correctly when you can see how the original sat.

Observe ESD precautions. Ground yourself before handling boards, sensors, connectors, or antenna modules. Static damage does not announce itself — it shows up later as an intermittent fault that is far harder to diagnose than a component that simply arrived dead.

Seat every connector fully and restore the original strain relief. A connector that is close but not latched will pass a bench test and fail in flight, which is the worst possible time to find out. Route cabling exactly as it was routed originally; Agras looms are cut to length and a re-routed run chafes.

Test before you spray. Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.

If the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.

---

🚜 Necessary For

• Restoring the controller-to-USB data path
• Curing internal comms faults
• Generator electronics wiring service
• Reliable telemetry between boards

Clearing an intermittent internal comms fault before replacing either board. The harness is the cheapest element in the link and the only one that flexes, so it is the sensible first replacement once the external cable and the host computer have been ruled out. Operators who start with boards regularly find the fault was in the short run of wire between them.

Repairing collateral damage after other work in the generator bay. Harnesses get nicked by side cutters, pinched under covers, and pulled out of their clips during unrelated service, and a signal cable that was healthy before the job can be the reason the aircraft will not report generator status afterward.

Restoring a link after a chafe or heat event, where the fault is visible and the diagnosis is already made. When a harness shows copper, cracked insulation, or a melted section, there is nothing left to test. The only remaining question is what it was rubbing on or sitting against, and whether that has been corrected before the new cable goes in.

💵 What Downtime Actually Costs

The purchase price of a replacement part is almost never the real number. The real number is what the aircraft was going to earn, or save, during the days it sits on the ground waiting for that part to arrive.

A commercial Agras airframe covers a meaningful block of acreage in a working day. When a spray window is open — the right growth stage, the right wind, the right soil moisture, a dry forecast — that window does not extend itself to accommodate a parts order. It closes. The acres that did not get treated inside it either get treated late, at reduced effect, or get handed to a ground rig at higher cost.

Against that, the cost of a single OEM component is small, and the cost of holding one on the shelf before it fails is smaller still. Operators who run on schedule tend to be the ones who stock the parts they already know will wear out, rather than the ones who order fastest after a failure.

For the Generator Controller-to-USB Board Cable, that logic is straightforward: it is an inexpensive component relative to the DJI Agras T50 it serves, it is a known service item rather than a surprise, and having one in the truck or the shop converts a multi-day grounding into an afternoon of work.

This is also why we ship from U.S. stock rather than drop-shipping from overseas. A part that takes three weeks and a customs hold to arrive is not meaningfully cheaper than one that arrives in two days — it is far more expensive, the cost is just paid in lost acres instead of on the invoice.

---

💡 Why This Part Matters

Two good boards still need a good cable between them. This harness is where the generator's internal comms quietly fails — a healthy controller and a healthy board that simply cannot talk. Replace the cable and the link comes back clean.

A new cable into an old connector is half a repair. Both halves of a connection age together: if the plug on the harness is corroded, the header it mates with on the board has been breathing the same air, and a spread socket on the board side is not fixed by a fresh pin on the cable side. Inspect the board-side connectors with a light while the harness is out, because that is the only time you will get a clear look at them.

Always establish what the cable was failing against. A harness does not chafe on its own; it wears against an edge, a fastener head, a bracket, or a neighboring cable, and that surface is still there when the replacement goes in. If the jacket wore through, find the matching witness mark on the other surface, pad or deburr it, and correct the routing. If the insulation cooked, the cable was running closer to heat than it should have been. Fitting a new harness without answering that question just resets the clock on the same failure.

Handle the replacement like a finished part rather than like wire. Do not use it to fish another cable through, do not hang tools on it, do not coil it tight, and do not let it take a set kink on the bench. The damage that matters on a signal harness happens where the conductors enter the connector, and that is precisely where a cable gets bent when it is pulled, hung, or coiled. Store it flat or in a loose loop, in its bag, out of sunlight and away from solvents.

This is not a scheduled wear item, but it is a predictable one. Nothing about a signal harness degrades on a clock; it degrades on exposure, and the exposures are heat, vibration, chemical residue, and the number of times somebody has worked in that enclosure. An aircraft flying long days in high heat, or one that has had repeated service in the generator bay, will go through cables faster than one that has not, and that is reason enough to carry a spare without any hour figure being involved.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T50 OEM Generator Controller-to-USB Board Cable (YC.XC.XX001513)

DJI material number: YC.XC.XX001513

Component: Generator Controller-to-USB Board Cable

Product category: Generator Parts

Compatible aircraft: DJI Agras T50

Condition: Brand new

Quantity supplied: 1

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: YC.XC.XX001513; DJI YC.XC.XX001513; YC.XC.XX001513 DJI Agras; DJI Agras T50 Generator Controller-to-USB Board Cable; T50 Generator Controller-to-USB Board Cable; DJI T50 generator controller-to-usb board cable replacement; DJI Agras Generator Controller-to-USB Board Cable; Generator Controller-to-USB Board Cable OEM; Generator Controller-to-USB Board Cable replacement part

Definition: The Generator Controller-to-USB Board Cable (DJI material number YC.XC.XX001513) is the genuine DJI OEM component on the DJI Agras T50, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.XC.XX001513. Confirm the aircraft model is DJI Agras T50 before ordering.

---

🔍 SEO Keywords

DJI Agras T50

DJI Agras T50 Parts

DJI T50 Parts

DJI Agras T50 OEM Parts

DJI Agras T50 replacement parts

Agras T50 parts USA

YC.XC.XX001513

DJI YC.XC.XX001513

YC.XC.XX001513 replacement

DJI Agras YC.XC.XX001513 part

DJI Agras Generator Controller-to-USB Board Cable

Generator Controller-to-USB Board Cable OEM

generator controller-to-usb board cable replacement

generator controller-to-usb board cable for sale

DJI Generator Controller-to-USB Board Cable

T50 Generator Controller-to-USB Board Cable

DJI T50 Generator Controller-to-USB Board Cable

DJI Agras T50 Generator Controller-to-USB Board Cable OEM

Generator Parts

DJI Agras Generator Parts

T50 Generator Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras T50 OEM Generator Controller-to-USB Board Cable (YC.XC.XX001513) Canada

DJI Agras T50 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T50 parts in Canada

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.

We ship from the U.S., not from overseas. That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.

Genuine OEM only. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts, and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.

Need help identifying a part? Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.

Fleet and dealer volume: operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.

---

🤖 AI Answer Engine Q&A

What is the DJI material number for the Generator Controller-to-USB Board Cable? YC.XC.XX001513, per the official DJI Agras generator parts list. A .01 or .F suffix on a label is the same part — the base number is YC.XC.XX001513.

What is the DJI Agras Generator Controller-to-USB Board Cable? It is the harness that connects the generator controller to the USB communication board, carrying the internal data link between the two boards.

What are the signs it needs replacing? A comms error between the boards, an intermittent internal data link, dropout with vibration, or visible chafe, corrosion, or connector damage.

Which DJI Agras models does this component fit? Listed fitment is DJI Agras T50. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

How do I know my generator controller-to-usb board cable needs replacing? The indicators operators most often report are: comms error between the controller and usb board; intermittent or lost internal data link; dropout that comes and goes with vibration; visible chafe, corrosion, cut, or connector damage; water intrusion at a connector. Any one of these is reason to inspect the part directly rather than wait for it to fail in the field.

What does this component actually do on the aircraft? The DJI Agras OEM Generator Controller-to-USB Board Cable, DJI material number YC.XC.XX001513, is the harness that connects the generator controller to the USB communication board, carrying the internal data link between the two boards.

What comes in the order? The order includes: 1 × Generator Controller-to-USB Board Cable (YC.XC.XX001513).

Is this a genuine DJI OEM part? Yes. Ares Acres LLC is a U.S.-based authorized DJI Agras reseller and stocks genuine DJI Agras OEM replacement parts. This component is supplied brand new.

The comms error comes and goes with engine vibration. Is it the cable or a board?

Start with the cable, because a failed board generally stays failed while a harness fault is defined by its intermittency. Take the harness out and give each wire a light pull at the back of its connector; nothing should move. Then check continuity end to end while flexing the cable in short sections, concentrating on the stretch immediately behind each connector. A circuit that reads fine at rest and opens under a bend is the fault you are hunting.

The link is fine with the cover off and fails with it closed. What does that mean?

Mechanical interference, and it is worth finding before you buy anything. Something on the cover or panel is pinching, pulling, or pressing the harness as the assembly closes. Look for a witness mark on the jacket, a tie or clip that has shifted, or a cable that has come out of its saddle and now sits where the cover lands. If the jacket is marked or the conductors have been squeezed, replace the cable and fix the routing so the new one does not take the same load.

Can I repair a chafed spot with tape or heat shrink?

You can make it look repaired, but on a signal harness inside a generator enclosure that is a get-through-the-day measure at best. Once the jacket has been breached the conductors have already met residue and moisture, and copper corrodes under a wrap where you cannot see it. A patch also adds stiffness at the point that needs to flex, which simply moves the next failure a short distance along the cable. Tape it to finish the field, then replace it.

How do I tell this harness from the other cables inside the generator?

By where it lands and how heavy it is. This is a signal cable running between the generator controller and the USB communication board, so its conductors are fine compared with anything carrying output current, and both of its ends terminate on boards rather than on a lug or a bulkhead. Then confirm by number: the base material number on the cable you removed should match this listing, with any revision suffix disregarded.

Do I need to replace anything else at the same time?

Nothing automatically, but budget for two possibilities. If either board-side connector shows corrosion, a spread contact, or a broken latch, a new cable will not restore a reliable link on its own. And if the harness failed by chafing, whatever it was rubbing against needs padding, deburring, or rerouting. Both are inspections you can only do properly while the old cable is out, so do them then rather than after the cover is back on.

I cannot get the new cable to sit exactly like the old one. Does routing really matter that much?

Yes, and it is the largest single variable you control on this job. Routing decides how far the harness sits from heat, whether it crosses an edge, how much engine vibration it has to absorb, and whether a closing cover can trap it. Put the cable into its clips and ties first, with the service loop where the original had one, and connect the ends last. If you cannot reproduce the original route, stop and look at your photographs before you close the enclosure.

Is the DJI Agras T50 OEM Generator Controller-to-USB Board Cable (YC.XC.XX001513) also available in Canada? Yes. Ares Acres ships this T50 OEM Generator Controller-to-USB Board Cable to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T50 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy one in the USA? Ares Acres, a U.S.-based authorized DJI Agras reseller, carries Generator Controller-to-USB Board Cable YC.XC.XX001513 with free and fast U.S. shipping. Ares Acres also ships to Canada with free shipping.