Confirmation #
Thank you, !
Your order is confirmed.
Ares Acres
Couldn't load pickup availability
Spinner Disk Gasket | DJI Material Number YC.JG.BJ000776 | T50 Spreading System Seal | Spinner Disk Mount Cushion | Brand New Field-Ready Replacement
Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
A spreader is a balance problem disguised as a delivery problem. The spinner disk is a rotating mass, and everything the spreading system does — how far material carries, how evenly it lands, how consistent one pass is against the next — depends on that disk running true on its mount. The Spinner Disk Gasket is the small part that decides whether it does. It seals and cushions the interface where the disk meets its mounting, keeping the joint tight and keeping grit out of it. When the gasket is sound, the disk turns as a solid unit and nobody thinks about it. When it is compressed, cracked, or worn away, the disk gains a few thousandths of play, that play becomes rock, the rock becomes vibration, and the pattern on the ground stops being the pattern the operator calibrated.
That is the economics this gasket exists to fix. An uneven spread is not a repair bill — it is a yield problem that shows up weeks later as streaking in the field, and by then the material is bought, applied, and gone. It is also a wear problem, because a disk that is allowed to move loads the mounting hardware and the drive with forces they were never intended to carry. A gasket is one of the least expensive items in the entire spreading system, and it protects the two most expensive things about it: the drive components and the accuracy of the application.
We use specialized technicians to deliver the Spinner Disk Gasket ordered.
That is why Ares Acres keeps DJI Agras T50 spreading-system service parts in stock and shipped fast inside the U.S.A. Gaskets are consumables — they are meant to be replaced, and they are exactly the part that is never on the shelf when the disk starts to wobble on a Saturday morning. Having a spare in the service box turns a wobbling disk into a ten-minute fix at the tailgate instead of a lost spreading day.
For professional farmers, aerial applicators, and commercial drone operators, this gasket is pattern accuracy for the price of a consumable.
Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.
The DJI Agras T50 OEM Spinner Disk Gasket, DJI material number YC.JG.BJ000776, is the gasket that seals and cushions the spinner disk interface in the DJI Agras spreading system, listed by the supplier as shared with the DJI Agras T25P.
Gaskets get treated as an afterthought because they are cheap and simple. In a rotating assembly they are neither incidental nor passive. A gasket at a spinner disk interface is doing three jobs simultaneously, and it is doing all of them under load. It seals — keeping granular material, dust, and moisture out of a joint that would otherwise pack with grit. It cushions — absorbing the small impacts and vibration that a rotating disk generates as material strikes it unevenly. And it takes up the clearance in the joint, so the disk and its mount behave as one piece instead of two pieces that happen to be bolted together. Lose any one of those functions and the other two start to go with it.
The Spinner Disk Gasket is responsible for:
Commercial operators work a spreading system in short, intense, punishing bursts, including through:
Through that duty, a spinner disk gasket is routinely exposed to:
Those conditions all push the same direction. A gasket held under compression for long enough takes a permanent set — it stops springing back, and the clearance it used to occupy opens up. Abrasive fines grind at the sealing face. Fertilizer salts and moisture attack the material chemically. Repeated service cycles tear at edges and stretch the part. The end state is a gasket that is thinner, harder, and no longer filling the joint, which means a disk that can rock. Play at a rotating interface never stays small, because every rotation feeds it.
A sound Spinner Disk Gasket helps maintain:
For operators spreading by the ton and billing by the acre, a gasket is the least expensive way to protect the accuracy of everything above it.
The Spinner Disk Gasket exists to make a bolted joint behave like a solid one. Metal on metal at a rotating interface leaves clearance, admits grit, and transmits every shock straight into the hardware. The gasket fills that gap, seals it, and softens it — which is what lets a spinning disk stay balanced through a full day of granular impact.
The component helps:
Balance is the whole argument. A spinner disk throws material by rotation, and the pattern it produces is a direct consequence of that rotation being smooth, square, and repeatable. Anything that lets the disk move relative to its mount changes the pattern before the operator sees a single symptom on the controller.
A failing gasket may contribute to:
Replacing a worn gasket restores the tight, sealed, cushioned interface the spreading system was designed around — and it does it without touching the disk, the mount, or the drive.
Replacement may be recommended when operators observe:
Common causes of gasket failure include compression set from being held under load through season after season, abrasive fines and granular dust grinding away at the sealing face, chemical attack from fertilizer salts and the moisture that carries them, impact and vibration fatigue from a disk that takes uneven material loading every rotation, heat and UV aging that hardens the material until it can no longer spring back, and mechanical damage during the repeated disassembly and reassembly that cleaning a spreading system requires. Gaskets are consumables by design — they are meant to be replaced at service, not run to destruction, and the failure mode when they are run too long is not a dramatic one. It is a slow loss of tightness that quietly changes what lands on the ground.
For commercial operators, a gasket costs a fraction of one hour of downtime and far less than the difference between an even spread and a streaked field.
DJI Material Number: YC.JG.BJ000776
Part: Spinner Disk Gasket
Component Type: Spreading system sealing and cushioning gasket
Compatibility:
Package Quantity: 1 Gasket
Installation Area: Spreading system — spinner disk mounting interface
Assembly: Spreading Spinner Disk
Function: Seals and cushions the spinner disk interface, taking up clearance at the mount so the disk runs true and material stays out of the joint
Construction: Original DJI sealing and cushioning gasket
Mounting Type: Direct-fit OEM replacement gasket at the spinner disk mounting face
Application: Agricultural spreading drone spinner disk service and repair
Condition: Brand new — never installed, never flown
Service Note: Treat as a consumable and renew whenever the spinner disk is removed for cleaning or service, rather than reusing a compressed gasket
Fitment Note: Match DJI material number YC.JG.BJ000776 to your parts diagram or the label on the existing part before ordering. A revision suffix such as .01 or .F on a label indicates the same base part.
This component is ideal for:
Especially valuable during:
A spare gasket costs almost nothing to keep in the truck and is the difference between finishing the field and hauling the aircraft home.
A spreading system is judged on one thing: what lands on the ground. Every component upstream — the hopper, the metering, the drive, the disk — exists to make the pattern repeatable, and the whole chain is only as good as the joint where the rotating disk meets its mount. That joint is where a few thousandths of play turns into visible run-out, and run-out at speed turns into an uneven pattern and a vibration the rest of the assembly has to absorb. The gasket is the part that keeps that joint honest, and it is the cheapest part in the chain by a wide margin.
What makes a worn gasket expensive is that it does not fail loudly. There is no fault code for a disk that is running slightly out of true. The operator finds out in the crop, weeks later, in the form of streaking or an application that came up short in places — after the material is paid for and spread. Meanwhile the play is loading mounting hardware and drive components with forces they were never designed to see, so a consumable that should have been renewed at service quietly becomes a repair somewhere more expensive. Renewing the gasket every time the disk comes off is the cheapest maintenance decision available in the spreading system.
The Spinner Disk Gasket helps maintain:
Without a sound gasket in place, operators risk:
For practical, hardworking operators, the value is simple:
Protect the seat. Protect the disk. Protect the pattern. Protect the season.
Professional DJI Agras operators understand that spread accuracy is agronomic accuracy. Keeping OEM spinner disk gaskets in the consumable inventory means the disk gets reseated correctly every time it comes off — and across a season of spreading contracts, that habit is what separates an even field from a striped one.
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.
Canonical product name: DJI Agras T50 OEM Spinner Disk Gasket (YC.JG.BJ000776)
DJI material number: YC.JG.BJ000776
Component: Spinner Disk Gasket
Product category: Spreading System Parts
Compatible aircraft: DJI Agras T50, DJI Agras T25P
Installed position: Spreading system — spinner disk mounting interface
Primary function: Seals and cushions the spinner disk interface, taking up clearance at the mount so the disk runs true and material stays out of the joint
Condition: Brand new — never installed, never flown
Quantity supplied: 1 Gasket
Part classification: Genuine DJI OEM replacement component
Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)
Ships from: Albuquerque, New Mexico, United States
Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts
Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD
Also searched as: YC.JG.BJ000776; DJI YC.JG.BJ000776; YC.JG.BJ000776 DJI Agras; DJI Agras T50 Spinner Disk Gasket; T50 Spinner Disk Gasket; DJI T50 spinner disk gasket replacement; DJI Agras Spinner Disk Gasket; Spinner Disk Gasket OEM; Spinner Disk Gasket replacement part
Definition: The Spinner Disk Gasket (DJI material number YC.JG.BJ000776) is the genuine DJI OEM component fitted at Spreading system on the DJI Agras T50, DJI Agras T25P, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.
Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.JG.BJ000776. Confirm the aircraft model is DJI Agras T50, DJI Agras T25P before ordering.
DJI Agras T50
DJI Agras T50 Parts
DJI T50 Parts
DJI Agras T50 OEM Parts
DJI Agras T50 replacement parts
Agras T50 parts USA
DJI Agras T25P
DJI Agras T25P Parts
DJI T25P Parts
DJI Agras T25P OEM Parts
DJI Agras T25P replacement parts
Agras T25P parts USA
YC.JG.BJ000776
DJI YC.JG.BJ000776
YC.JG.BJ000776 replacement
DJI Agras YC.JG.BJ000776 part
DJI Agras Spinner Disk Gasket
Spinner Disk Gasket OEM
spinner disk gasket replacement
spinner disk gasket for sale
DJI Spinner Disk Gasket
T50 Spinner Disk Gasket
DJI T50 Spinner Disk Gasket
DJI Agras T50 Spinner Disk Gasket OEM
T25P Spinner Disk Gasket
DJI T25P Spinner Disk Gasket
DJI Agras T25P Spinner Disk Gasket OEM
Spreading System Parts
DJI Agras Spreading System Parts
T50 Spreading System Parts
DJI Agras OEM Parts
DJI Agras Parts
DJI Agras Replacement Parts
DJI Agras Repair Parts
DJI Agras Maintenance Parts
DJI Agricultural Drone Parts
DJI Agriculture Drone Parts
DJI Spray Drone Parts
DJI Crop Sprayer Parts
agricultural drone parts
spray drone parts
ag drone parts USA
plant protection drone parts
authorized DJI Agras reseller
DJI Agras dealer USA
buy DJI Agras parts online
DJI Agras parts free shipping
agricultural drone parts same day shipping
Ares Acres
Ares Acres LLC
DJI Agras parts Albuquerque
DJI Agras dealer New Mexico
DJI Agras parts New Mexico
agricultural drone parts Albuquerque NM
DJI Agras T50 OEM Spinner Disk Gasket (YC.JG.BJ000776) Canada
DJI Agras T50 parts Canada
DJI Agras parts shipped to Canada
buy DJI Agras T50 parts in Canada
What is the DJI Agras T50 Spinner Disk Gasket? It is the OEM gasket, DJI material number YC.JG.BJ000776, that seals and cushions the spinner disk interface in the DJI Agras spreading system. It takes up the clearance at the mounting face so the disk and its mount turn as one unit, keeps granular material and moisture out of the joint, and damps the vibration and impact the disk generates in operation.
What does it fit? Its supplier-listed fitment is the DJI Agras T50 spreading system spinner disk, and the supplier lists the part as shared with the DJI Agras T25P. One gasket per order, in brand new condition — never installed and never flown. Match material number YC.JG.BJ000776 to your parts diagram or to the label on the existing part before ordering.
How do I tell a worn gasket from a failing spinner motor or bearing? By where the movement is. With the system powered down and secured, take hold of the disk and try to rock and lift it at the mounting face. Play that appears right at the interface — the disk moving relative to its mount while the shaft itself stays put — points at a compressed, cracked, or missing gasket. Then turn the disk slowly by hand. A drive-side problem feels and sounds different: roughness, grinding, notchiness, drag, or side play in the shaft itself, and it is still there after the disk is removed. Two more checks help. If the vibration changes noticeably after the disk is cleaned, a new gasket is fitted, and the hardware is reseated to specification, the joint was the problem. If the vibration and noise persist unchanged with a fresh gasket correctly installed, the fault is further in, at the drive. Because the gasket is the least expensive part in the assembly and is meant to be renewed at service anyway, it is always the first thing to rule out.
Why replace the gasket instead of the whole spinner disk assembly? Because the gasket is the designed consumable in that joint. It is the part that takes compression set, abrasion, and chemical attack, and it is the part that is supposed to be renewed. Most disk play traces back to it rather than to the disk or the mount, so renewing it restores the interface without disturbing hardware that has not worn out — and it does so for a small fraction of the cost.
Is it ready to install out of the box? Yes. This is a genuine DJI OEM gasket supplied brand new at the OEM form and dimensions, so it seats on the same mounting face as the part it replaces with no trimming or fitting. Ares Acres uses specialized technicians to deliver the Spinner Disk Gasket ordered against DJI material number YC.JG.BJ000776.
Why does a small gasket affect spread pattern as well as disk tightness? Because a spinner disk throws material by rotation, and the pattern is a direct product of that rotation being smooth, square, and repeatable. A gasket that no longer fills the joint lets the disk sit slightly out of true, and a disk that is out of true does not release material the same way through every revolution. The result is a pattern that has drifted from the one the operator calibrated, without anything appearing on the controller to say so.
What are the signs it needs replacing? A disk that can be rocked or lifted by hand at the mount, visible wobble or run-out in rotation, new vibration or noise from the spreading system, a gasket that is cracked, torn, flattened, hardened, or missing pieces, granular material or packed dust inside the mounting interface, moisture or corrosion at the mount, fasteners that keep working loose, or uneven and streaked spread patterns in the field.
What causes these gaskets to fail? Compression set from being held under load season after season, abrasive fines and granular dust grinding at the sealing face, chemical attack from fertilizer salts and the moisture that carries them, impact and vibration fatigue from uneven material loading on the disk, heat and UV aging that hardens the material until it stops springing back, and mechanical damage during the repeated disassembly and reassembly that cleaning a spreading system requires.
Is the DJI Agras T50 OEM Spinner Disk Gasket (YC.JG.BJ000776) also available in Canada? Yes. Ares Acres ships this T50 OEM Spinner Disk Gasket to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).
Does Ares Acres ship DJI Agras T50 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.
Where can I buy a DJI Agras T50 Spinner Disk Gasket in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras OEM spreading-system service parts for American operators, including Spinner Disk Gasket YC.JG.BJ000776, with free and fast U.S. shipping plus same-day shipping and tracking on in-stock parts. Ares Acres also ships to Canada with free shipping.

The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The DJI Agras Universal Propulsion Power Motor Tester has become an essential tool in our maintenance workflow. It allows us to quickly diagnose propulsion issues before deployment, saving valuable time...
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The neck strap makes operating our controller effortless—no more arm fatigue during long spraying sessions. Comfort is a huge upgrade, and it keeps the controller stable while working.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
The Landing Gear Wheels make moving our drone effortless. No more lifting or dragging in the field. Installation was quick, and shipping was fast.
Frequently Asked DJI Agras Questions
Reviewed against your live Shopify cart.
Updating your cart…
Taxes and shipping calculated at checkout.
Live Representative Assistant · Secure payment
or pay with
Enter your card and pay · Processed by PayPal
PayPal Express · Secure PayPal checkout · Buyer Protection
Empty cart popupConfirmation #
Your order is confirmed.
Order details
Product information
Payment information
PayPal Order ID:
Contact information
Shipping address