DJI Agras T50 OEM Spray Line Service Kit

T50 OEM Spray Line Service Kit | DJI Agras T50 OEM Pipe Nut Set (10 Pcs) | DJI Agras T50 OEM Pipe Nut Wrench | DJI Agras T50 OEM Fixing Nut and Adapter Shaft | DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 4 component lines, 4 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The T50 OEM Spray Line Service Kit exists because the parts inside it are the ones that strand a T50 in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras T50 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Configured for DJI Agras T50. Verify fitting locations and model fitment before installation.

---

📦 Package Includes

• 1 × DJI Agras T50 OEM Pipe Nut Set (10 Pcs)
• 1 × DJI Agras T50 OEM Pipe Nut Wrench
• 1 × DJI Agras T50 OEM Fixing Nut and Adapter Shaft
• 1 × DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085)

---

🔧 Kit Overview

The DJI Agras T50 OEM Spray Line Service Kit combines commonly handled plumbing hardware with the correct pipe-nut wrench and tank inlet filtration. It is built for spray-system service where fittings must be removed, replaced and reassembled without improvising tools or overlooking contamination control.

This Ares Acres curated kit uses genuine DJI OEM components and DJI Agras service tooling sold individually. It is not a factory-packaged DJI kit.

• Spray hose/fitting service
• Damaged pipe nut replacement
• Tank inlet maintenance
• Field-service spare inventory

---

🔩 Component-by-Component Breakdown

1. DJI Agras T50 OEM Pipe Nut (10 Pcs)

DJI Agras T50 OEM Pipe Nut (10 Pcs). Pipe nuts / spray line connection hardware. It installs at the spray system line and hose connections. Its job on the aircraft is straightforward: secures and seals liquid path connections.

On the DJI Agras T50 OEM Pipe Nut (10 Pcs), construction is durable, high-grade materials for chemical duty; the design is threaded connection nut, direct-fit; it mounts as direct-fit OEM replacement components; this line supplies 10 Pipe Nuts. Fitment covers DJI Agras T50, DJI Agras T40. Application: agricultural drone spray system maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T50 OEM Pipe Nut (10 Pcs) is responsible for a short and specific list of jobs: fasten spray line and hose connections securely, keep joints sealed under operating pressure, hold connections tight through flight vibration, prevent leaks and chemical weeping at joints, support fast line service and reconfiguration, replace worn, stripped, or cross-threaded nuts, restore factory-tight connections, stock the field kit with 10 fresh spares, install quickly by hand during service, and maintain correct fitment across both models. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

In commercial service the DJI Agras T50 OEM Pipe Nut (10 Pcs) lives through repeated tightening and loosening cycles, pressure cycling at every spray run, continuous chemical contact, constant airframe vibration, grit and debris in the threads, over-tightening stress from gloved hands, cross-threading during hurried field service, moisture and washdown exposure, and uV exposure across long seasons. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.

Left in service past its useful life, the DJI Agras T50 OEM Pipe Nut (10 Pcs) may contribute to leaking or weeping line connections, chemical drips and waste, pressure loss in the spray system, lines working loose under vibration, stripped joints that won't seal, field teardowns to chase leaks, interrupted spraying missions, unexpected downtime, and reduced fleet reliability. A fresh one instead maintains joints worth pressurizing, a liquid path that stays sealed all day, fast, confident line service, a stocked field kit all season, two-model fleet coverage, professional fleet standards, increased aircraft uptime, reliable commercial performance, and long-term operational confidence.

Depressurize before anything comes apart. Stop the pump, let the system bleed down, and open a low point or trigger a nozzle to release whatever is still trapped in the line. A spray system that has just been running holds pressure after the pump stops, and a nut cracked loose against that pressure puts concentrate on whatever is in front of it. Wear the same protection you wear mixing product, and set a catch tray or a rag under the joint, because even a drained line holds chemical in its low spots.

Support the fitting, not just the nut. Every one of these joints threads onto something anchored to a pump port, a manifold, a filter body, or a molded spigot in the airframe, and every bit of effort you put into the nut is carried by that anchor. Hold the fitting steady with your other hand or a second wrench so the load stays in the joint instead of twisting a port or cracking a plastic boss. Breaking the thing the nut screws onto turns a consumable replacement into a component replacement and a much longer day.

Slide the nut onto the hose before the hose goes onto the spigot. It is the most common mistake on the whole job. Where the nut has to be captive on the hose end it cannot be fitted afterward, so the joint gets built, tightened, tested, and then taken apart again with the fresh nut still sitting on the bench where it was left. Check that the nut is on the hose and facing the right way around before the hose is pushed home, every single time.

The DJI Agras T50 OEM Pipe Nut (10 Pcs) earns its place in this kit because of how it fails. Operators replace it when they see leaking or weeping at line connections, worn, stripped, or crossed threads, nuts that no longer tighten firmly, cracked or deformed nut bodies, degraded sealing faces, chemical-attacked or brittle material, grit-packed threads that won't clean, or nuts seized onto fittings. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras T50 OEM Pipe Nut Wrench

DJI Agras T50 OEM Pipe Nut Wrench. Pipe nut service wrench / spray system fitting tool. Its job on the aircraft is straightforward: loosens and tightens spray system pipe nuts without damaging molded fittings.

On the DJI Agras T50 OEM Pipe Nut Wrench, construction is molded OEM service tool; the design is double-ended molded wrench; this line supplies 1 Piece. Fitment covers DJI Agras T50, DJI Agras T40. Application: agricultural drone spray system maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T50 OEM Pipe Nut Wrench is responsible for a short and specific list of jobs: loosen and tighten spray system pipe nuts, seat fittings to proper snugness, protect molded nuts from tool damage, prevent rounded and crushed nut flats, prevent cracked fitting collars, stop leaks caused by under-tightened fittings, avoid over-tightening damage, speed up nozzle and filter service, simplify hose replacement, and support field repairs away from the shop. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

In commercial service the DJI Agras T50 OEM Pipe Nut Wrench lives through repeated loosening and re-tightening, improvised tools and metal pliers, over-tightening by hand, chemical exposure that hardens plastic, uV aging in the field, vibration loosening between services, cross-threading from poor grip, and cold-weather brittleness. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.

Left in service past its useful life, the DJI Agras T50 OEM Pipe Nut Wrench may contribute to rounded-off pipe nuts, cracked fitting collars, marred and weakened plastic, under-tightened, leaking connections, over-tightened, stressed fittings, cross-threaded nuts, stripped plumbing hardware, slow, frustrating field service, and unnecessary parts replacement. A fresh one instead maintains leak-free spray plumbing, undamaged fittings, fast field service, proper fitting torque, longer spray system life, cleaner maintenance, lower repair costs, professional fleet standards, and increased aircraft uptime.

A proper pipe nut wrench keeps every connection in the spray system serviceable — season after season, without chewing up the very fittings that keep the liquid where it belongs.

Start every nut by hand and never with the wrench. Push the parts together square, turn the nut backwards until you feel the threads drop into each other, then run it in with your fingers as far as it will go. Only when it is finger tight does the wrench come out, and then it is there for the last part of the travel, not for the whole job. Almost every cross-threaded fitting on a spray system started with somebody using a wrench to get a nut moving that was never lined up in the first place.

Hold the fitting body while you turn the nut, so the torque you apply stays inside the joint. If you pull on the nut alone, everything you put into the wrench goes down the hose or into whatever the fitting is screwed to, which on a spray system means a pump port, a filter housing, a manifold, or a nozzle body. Support that side with your other hand or a second wrench, keep both hands close in, and pull the tool toward you rather than pushing it away. Pushing is how knuckles find the airframe when a nut lets go suddenly.

The DJI Agras T50 OEM Pipe Nut Wrench earns its place in this kit because of how it fails. Operators replace it when they see cracked wrench body, spread or worn wrench jaws, jaws slipping on fittings, chemical-related deterioration, uV aging and brittleness, lost or misplaced field tools, pliers marks appearing on pipe nuts, or new aircraft added to the fleet. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras T50 OEM Fixing Nut and Adapter Shaft

DJI Agras T50 OEM Fixing Nut and Adapter Shaft. Fixing nut and adapter shaft / spray system connection hardware. It installs at the spray system fluid connection point. Its job on the aircraft is straightforward: secures and seals the spray fluid path connection.

On the DJI Agras T50 OEM Fixing Nut and Adapter Shaft, construction is durable molded and machined components; the design is matched threaded nut and adapter shaft pair; it mounts as direct-fit replacement components; this line supplies 1 Fixing Nut + 1 Adapter Shaft. Fitment covers DJI Agras T50, DJI Agras T40. Application: agricultural drone spray system maintenance. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T50 OEM Fixing Nut and Adapter Shaft is responsible for a short and specific list of jobs: lock the fluid path connection securely, seal the joint against leaks and weeping, maintain consistent fluid distribution, resist vibration-driven loosening, withstand chemical exposure at the joint, replace worn, stripped, or leaking hardware, restore factory connection integrity, install quickly to minimize downtime, maintain correct fitment on the spray system, and support preventative maintenance. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

In commercial service the DJI Agras T50 OEM Fixing Nut and Adapter Shaft lives through constant liquid flow loading, abrasive chemical formulations, chemical corrosion attack, repeated service and torque cycles, cross-threading and over-tightening stress, vibration at every joint, pressure-washing and rinse cycles, uV exposure, and heat cycling in summer conditions. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.

Left in service past its useful life, the DJI Agras T50 OEM Fixing Nut and Adapter Shaft may contribute to leaking or weeping joints, chemical drips and product waste, inconsistent fluid delivery, pressure loss in the spray system, chemical contact with the airframe, field teardowns and re-tightening stops, interrupted spraying missions, unexpected downtime, and higher repair costs over time. A fresh one instead maintains leak-free fluid connections, full spray system pressure, clean, waste-free operation, protected airframe surfaces, fast field-side service, factory fit and sealing, professional fleet standards, increased aircraft uptime, and reliable commercial performance.

Take the pressure out of the system and get the product out of the line before anything is loosened. Relieve pressure, drain what you can into a container, and rinse the outside of the fitting so the residue on it is water rather than concentrate. Gloves and eye protection matter here more than almost anywhere else on the aircraft, because a joint that is about to be opened has been holding chemical under pressure and it does not always let go politely.

Hold the fitting still while you turn the nut. Put a second wrench or a firm hand on the body that the nut threads onto, so the torque you apply goes into the joint and not into the hose, the barb, or whatever is anchoring the plumbing behind it. Twisting the assembly behind a stuck nut is the standard route from a small weep to a broken fitting and a much longer afternoon.

Start the nut by hand and give it several free turns before any tool touches it. This is the single most common place a good part is ruined during a field repair, because the joint is usually in an awkward spot, the operator is wearing gloves, and the nut goes on at a slight angle without anybody feeling it. If it will not start easily by hand, back it off completely and look at the thread rather than persuading it.

The DJI Agras T50 OEM Fixing Nut and Adapter Shaft earns its place in this kit because of how it fails. Operators replace it when they see leaking or weeping at the connection, worn or cross-threaded nut threads, stripped or damaged adapter shaft threads, nuts that no longer tighten firmly, degraded sealing surfaces, chemical-related deterioration, cracks in the nut or shaft body, or brittle, UV-aged material. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

4. DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085)

DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) — DJI material number YC.JG.ZS001085. Spray tank inlet filter / fill filtration screen. It installs at the spray tank fill inlet. Its job on the aircraft is straightforward: screens debris and impurities from liquid entering the tank.

On the DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085), construction is chemical-resistant materials; the design is filtration screen with easy-clean, tool-free service; it mounts as direct-fit replacement component; this line supplies 1 Filter. Fitment covers DJI Agras T50, DJI Agras T40, DJI Agras T30, DJI Agras T25, DJI Agras T25P, DJI Agras T20P, DJI Agras T10. Application: agricultural drone spray system filtration. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) is responsible for a short and specific list of jobs: catch debris before it enters the system, screen undissolved product and powder clumps at the fill, keep field-water sediment out of the tank, protect pumps from abrasive particles, protect valves from jamming on trapped debris, protect flow meters and measurement accuracy, prevent nozzle and spray disc clogging, maintain clean, consistent flow through the fluid path, withstand repeated chemical contact, and clean easily between fills without tools. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

In commercial service the DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) lives through debris-laden field-side fills, undissolved product and powder clumps, blowing dust at the fill point, variable water source sediment from wells, ponds, and nurse tanks, concentrated chemical contact before dilution, fertilizer residue buildup between fills, repeated cleaning and rinse cycles, uV exposure at the open tank mouth, and handling wear every time the filter comes out and goes back. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.

Left in service past its useful life, the DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) may contribute to debris circulating through the entire system, clogged nozzles and spray discs, jammed valves and stuck components, abrasive wear inside pumps, slow, choking tank fills that stretch every turnaround, uneven spray delivery across the boom, interrupted spraying missions, unexpected downtime during an application window, and reduced fleet reliability when timing matters most. A fresh one instead maintains a clean fluid path from tank mouth to nozzle, protected pumps, valves, meters, and nozzles, clog-free spraying days through the window, one-spare-fits-all coverage across a mixed fleet, fast, tool-free filter service between fills, professional fleet standards, increased aircraft uptime, reliable commercial performance, and long-term operational confidence.

The Spray Tank Inlet Filter is designed to screen debris and impurities from liquid entering the DJI Agras spray tank, placing a serviceable, replaceable barrier at the exact point where contamination would otherwise enter the aircraft.

Everything downstream is only as clean as what the inlet lets through — and no amount of care further along the line recovers what was admitted at the tank mouth.

The DJI Agras Original Spray Tank Inlet Filter (YC.JG.ZS001085) is the tank-fill filtration screen that sits at the spray tank inlet and screens dust, dirt, and impurities out of every gallon that enters the system. It is the first component any liquid meets on its way into the aircraft, and it is the only one positioned to stop contamination before contamination becomes a problem somewhere else.

The DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) earns its place in this kit because of how it fails. Operators replace it when they see torn or holed filter mesh, stubborn clogging that cleaning will not clear, deformed or collapsed filter body, chemical-hardened or brittle screen material, debris found downstream of the filter, slow fills through fouled mesh, discolored or visibly degraded screen material, or repeated nozzle clogs traced back upstream. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The T50 OEM Spray Line Service Kit is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras T50 OEM Pipe Nut (10 Pcs) — Secures and seals liquid path connections
• DJI Agras T50 OEM Pipe Nut Wrench — Loosens and tightens spray system pipe nuts without damaging molded fittings
• DJI Agras T50 OEM Fixing Nut and Adapter Shaft — Secures and seals the spray fluid path connection
• DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) — Screens debris and impurities from liquid entering the tank

Flush and depressurize the liquid system before service. Inspect seals and threads and avoid overtightening plastic fittings.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• Leaking or weeping at line connections
• Worn, stripped, or crossed threads
• Nuts that no longer tighten firmly
• Cracked or deformed nut bodies
• Degraded sealing faces
• Chemical-attacked or brittle material
• Grit-packed threads that won't clean
• Nuts seized onto fittings
• Connections loosening between services
• High-cycle connection hardware
• Maintenance inspection findings
• Spray system rebuild projects
• Fleet refurbishment projects
• Preventative pre-season replacement
• Cracked wrench body
• Spread or worn wrench jaws
• Jaws slipping on fittings
• Chemical-related deterioration
• UV aging and brittleness
• Lost or misplaced field tools
• Pliers marks appearing on pipe nuts
• New aircraft added to the fleet
• Building out additional field kits
• Equipping service trucks and trailers
• Seasonal toolkit restocking
• Preventative maintenance programs
• Leaking or weeping at the connection
• Worn or cross-threaded nut threads
• Stripped or damaged adapter shaft threads
• Degraded sealing surfaces
• Cracks in the nut or shaft body
• Brittle, UV-aged material
• Joints that loosen between missions
• Seasonal spray system rebuilds
• Long-term commercial wear
• Torn or holed filter mesh
• Stubborn clogging that cleaning will not clear
• Deformed or collapsed filter body
• Chemical-hardened or brittle screen material
• Debris found downstream of the filter

Any one of these on a T50 is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the T50 OEM Spray Line Service Kit on a T50; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras T50 OEM Pipe Nut (10 Pcs). Work at the spray system line and hose connections. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it secures and seals liquid path connections as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras T50 OEM Pipe Nut Wrench. Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Once fitted, confirm that it loosens and tightens spray system pipe nuts without damaging molded fittings as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras T50 OEM Fixing Nut and Adapter Shaft. Work at the spray system fluid connection point. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it secures and seals the spray fluid path connection as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 4 — DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085). Work at the spray tank fill inlet. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it screens debris and impurities from liquid entering the tank as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the T50 OEM Spray Line Service Kit, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 4

Aircraft coverage: DJI Agras T50

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras T50 OEM Pipe Nut (10 Pcs)
Component Type: Pipe nuts / spray line connection hardware
Installation Area: Spray system line and hose connections
Function: Secures and seals liquid path connections
Package Quantity: 10 Pipe Nuts
Construction: Durable, high-grade materials for chemical duty
Mounting Type: Direct-fit OEM replacement components
Compatibility: DJI Agras T50, DJI Agras T40

DJI Agras T50 OEM Pipe Nut Wrench
Component Type: Pipe nut service wrench / spray system fitting tool
Function: Loosens and tightens spray system pipe nuts without damaging molded fittings
Package Quantity: 1 Piece
Construction: Molded OEM service tool
Compatibility: DJI Agras T50, DJI Agras T40

DJI Agras T50 OEM Fixing Nut and Adapter Shaft
Component Type: Fixing nut and adapter shaft / spray system connection hardware
Installation Area: Spray system fluid connection point
Function: Secures and seals the spray fluid path connection
Package Quantity: 1 Fixing Nut + 1 Adapter Shaft
Construction: Durable molded and machined components
Mounting Type: Direct-fit replacement components
Compatibility: DJI Agras T50, DJI Agras T40

DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085)
DJI Material Number: YC.JG.ZS001085
Component Type: Spray tank inlet filter / fill filtration screen
Installation Area: Spray tank fill inlet
Function: Screens debris and impurities from liquid entering the tank
Package Quantity: 1 Filter
Construction: Chemical-resistant materials
Mounting Type: Direct-fit replacement component
Compatibility: DJI Agras T50, DJI Agras T40, DJI Agras T30, DJI Agras T25, DJI Agras T25P, DJI Agras T20P, DJI Agras T10

---

🚜 Necessary For

The T50 OEM Spray Line Service Kit suits operators running DJI Agras T50 airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

The wrench provides the service method, while the pipe nuts and adapter hardware are the replaceable fittings technicians encounter during plumbing work. The inlet filter adds contamination protection when the liquid-delivery system is being opened and inspected.

Bought separately, these 4 lines are 4 chances to order the wrong variant, 4 shipments to wait on, and 4 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

This kit pairs service tooling with the exact class of hardware it is intended to maintain, turning a group of small catalog items into a coherent repair product.

---

🧩 What This Kit Does Not Include

A kit is defined as much by its edges as by its contents. The T50 OEM Spray Line Service Kit covers the components listed above and nothing else. If your repair reaches past them, these are the adjacent T50 parts we stock separately — listed here so the second order does not become a second week of downtime:

• DJI Agras T50 Spray Tank Inlet Filter Replenishment (Monthly Program) (YC.JG.ZS001085) — YC.JG.ZS001085
• DJI Agras T50 OEM Fixing Nut and Adapter Shaft Set (10 Pcs)
• DJI Agras T50 OEM Spray Tank Filter (50 Holes) (YC.JG.ZS002429) — YC.JG.ZS002429
• DJI Agras T50 OEM Complete 40L Water Tank / Spray Tank System Assembly
• DJI Agras T50 OEM Spray Tank Cap (2 Pcs) (YC.JG.ZS002251) — YC.JG.ZS002251
• DJI Agras T50 OEM Spray Tank Cap Sealing Ring (2 Rings) (YC.JG.MY000679) — YC.JG.MY000679
• DJI Agras T50 OEM Spray Tank Liquid Level Meter and Nut (BC.AG.SS000471) — BC.AG.SS000471
• DJI Agras T50 OEM Y-Tee Spray Tank (YC.JG.ZS002232) — YC.JG.ZS002232
• DJI Agras T50 Spray Tank Cap Sealing Ring (2 Rings) Replacement (Quarterly Program) (YC.JG.MY000679) — YC.JG.MY000679

None of the above is included in this kit. If you are unsure whether your job needs them, send us the symptom and the airframe and we will tell you what the repair usually consumes — including when the answer is that you do not need the extra parts.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras T50 OEM Spray Line Service Kit

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Compatible aircraft: DJI Agras T50

Component count: 4

Contains: DJI Agras T50 OEM Pipe Nut (10 Pcs); installed at Spray system line and hose connections

Contains: DJI Agras T50 OEM Pipe Nut Wrench

Contains: DJI Agras T50 OEM Fixing Nut and Adapter Shaft; installed at Spray system fluid connection point

Contains: DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085); material number YC.JG.ZS001085; installed at Spray tank fill inlet

Material numbers in this kit: YC.JG.ZS001085

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

DJI Agras T50

DJI Agras T50 Parts

DJI Agras T50 OEM Parts

DJI Agras T50 repair kit

Agras T50 parts USA

T50 OEM Spray Line Service Kit

DJI Agras T50 OEM Spray Line Service Kit

T50 OEM Spray Line Service Kit OEM

T50 OEM Spray Line Service Kit for sale

DJI Agras T50 OEM Pipe Nut (10 Pcs)

DJI Agras T50 OEM Pipe Nut Wrench

DJI Agras T50 OEM Fixing Nut and Adapter Shaft

DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085)

YC.JG.ZS001085

DJI YC.JG.ZS001085

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Is this an official DJI-boxed kit? No. It is assembled by Ares Acres from genuine DJI OEM components that are each sold individually in our catalog. We list it this way deliberately so there is no confusion about what you are buying.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 4 component lines.

What is a DJI Agras pipe nut? It is the threaded nut that secures and seals a spray line connection in the liquid path of the DJI Agras T50 and T40. Ares Acres supplies it as a 10-piece OEM replacement pack, because a spray system has many joints and they are serviced together rather than one at a time.

Which DJI Agras models do these pipe nuts fit? The listing's specifications state fitment for the DJI Agras T50 and the DJI Agras T40, so one pack covers both airframes in a mixed fleet.

Where does the DJI Agras T50 OEM Pipe Nut (10 Pcs) go and what does it do? It installs at the spray system line and hose connections, where it secures and seals liquid path connections.

What is the DJI Agras T50 OEM Pipe Nut Wrench? It is a double-ended molded service wrench shaped to fit the water pipe nuts on the DJI Agras spray system, giving operators proper leverage on plumbing fittings without damaging them.

Which aircraft is this wrench for? Per the listing's specifications, it services the spray system pipe nuts of the DJI Agras T50 and DJI Agras T40.

What is the DJI Agras fixing nut and adapter shaft? It is a matched two-piece connection hardware set — one threaded fixing nut and its mating adapter shaft — that locks and seals the spray system's fluid path on the DJI Agras T50 and T40.

Which drones does this hardware fit? The DJI Agras T50 and T40 spray systems.

Where does the DJI Agras T50 OEM Fixing Nut and Adapter Shaft go and what does it do? It installs at the spray system fluid connection point, where it secures and seals the spray fluid path connection.

What is the DJI part number for the DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) in this kit? YC.JG.ZS001085. A revision suffix such as .01 or .F on your old part's label marks a manufacturing revision, not a different part — match the base number.

What is the DJI Agras spray tank inlet filter? It is the filtration screen that sits at the spray tank fill inlet and screens dust, dirt, and impurities out of every gallon entering the system, protecting the pumps, valves, meters, and nozzles downstream. Its DJI material number is YC.JG.ZS001085. Ares Acres supplies it brand new as a direct-fit OEM replacement component, one filter per order, with easy-clean tool-free service and chemical-resistant construction.

What does it fit, and what is the DJI material number? The DJI material number is YC.JG.ZS001085, and listed compatibility covers seven DJI Agras models: the T50, T40, T30, T25, T25P, T20P, and T10. Order against the material number rather than against the model name alone — that is what confirms you have the right screen. If the label on your old part shows a revision suffix such as .01 or .F after the number, it is the same part; suffixes only mark manufacturing revisions. Because one filter covers seven airframes, a single spare serves a mixed-model fleet.

Where does the DJI Agras T50 OEM Spray Tank Inlet Filter (YC.JG.ZS001085) go and what does it do? It installs at the spray tank fill inlet, where it screens debris and impurities from liquid entering the tank.

Which aircraft does this kit cover? DJI Agras T50. Confirm the component variant against your aircraft's parts diagram before installation.

---