DJI Agras T50 OEM Spread Tank Cover (YC.JG.ZS003495)

T50 Spread Tank Cover | Spreading Hopper Lid | Granular Product Weather Seal | DJI Material Number YC.JG.ZS003495 | Field-Ready OEM Replacement Component

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

The spread tank cover is the part of a spreading system nobody thinks about until the product in the hopper stops behaving. It closes the top of the DJI Agras T50 spread tank — the seed tank — and it does its work by simply being there: seated, latched, and holding the opening shut against weather, airflow, and the motion of a loaded aircraft. What it holds back is the entire premise of a spreading job. Dry, free-flowing granular product meters at a predictable rate. Damp product does not. It cakes, it bridges over the outlet, it feeds in surges instead of a steady stream, and the application record that comes off that flight describes a job that was never actually done that way.

The economics are not close. A tank cover is one of the least expensive components in the entire spreading system, and what sits behind it is a hopper of paid-for seed or fertilizer, a metering mechanism that only works on dry material, and the accuracy of an application a customer is paying for by the acre. Product lost out of the top of a tank in flight is gone twice — once as the cost of the material, and again as the strip of field that did not get its rate. A cracked or missing cover keeps costing money on every load until it is replaced, and it never announces itself with a fault code.

We use specialized technicians to deliver the DJI Agras T50 Spread Tank Cover ordered.

That is why Ares Acres keeps DJI Agras spreading system hardware in stock and shipped fast to the U.S.A., helping operators close the hopper properly, minimize downtime, and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators, this cover is the cheapest insurance on the load in the hopper.

Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T50 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 1 × Original Spread Tank Cover
• DJI material number YC.JG.ZS003495
• Verified against the official DJI Agras T50 parts list
• Supplier-listed fitment: DJI Agras T50 spreading system
• Brand new condition — never installed, never flown
• Protective packaging

---

🔧 Component Overview

The DJI Agras T50 OEM Spread Tank Cover, DJI material number YC.JG.ZS003495, is the cover that closes the top of the T50 spreading (seed) tank. It keeps granular product dry and contained, and it seals the hopper against weather and in-flight spill. It is a simple part with a narrow job, and the job is absolute: what is in the tank stays in the tank, and what is outside the tank stays outside it.

That matters more on a spreading aircraft than it does on a ground rig. A hopper on a spreader cart sits level, moves at ground speed, and lives under the operator's eye. A hopper on a T50 climbs, banks, accelerates, decelerates, and sits in its own rotor wash for the entire flight, and the only thing between a loaded tank of granular material and the open air above the field is this cover and the way it seats. Everything downstream of the tank — the feed path, the metering, the spread pattern, the application record — assumes a closed hopper full of dry product. The cover is the assumption.

The Spread Tank Cover is responsible for:

• Closing the top opening of the T50 spread tank
• Sealing the hopper against weather
• Keeping granular product dry inside the tank
• Keeping loaded product contained in flight
• Preventing spill from the tank top during maneuvering
• Keeping rain, dew, and standing water out of the load
• Keeping dust, debris, and foreign material out of the hopper
• Protecting the free-flowing condition the metering depends on
• Holding a positive, latched closure through a full flight
• Restoring the factory closure when the original is damaged or lost

Spreading work is high-tempo work. A granular load goes on the aircraft, gets flown out, and the aircraft comes back for another one — and the cover is opened and closed on every single cycle. Commercial operators put those cycles on this part through:

• Granular fertilizer application
• Seeding and overseeding operations
• Cover crop seeding
• Pasture and rangeland spreading
• Rice and paddy seeding work
• Orchard and grove granular application
• High-tempo fill-and-fly rotations
• Multiple hopper loads per hour
• Daily commercial deployments
• High-acreage contract spreading

Each of those loads means the cover is handled, released, moved clear of the opening, and closed and secured again under time pressure by someone whose real concern is the next field. Throughout that duty, the cover is routinely exposed to:

• Repeated open-and-close cycles at every refill
• Rotor wash and airflow pressure across the tank top in flight
• Vibration transmitted through the airframe and the loaded hopper
• Abrasive contact from granular product during filling
• Fertilizer dust and residue at the sealing surfaces
• Moisture, rain, dew, and washdown water
• Temperature swings between cold mornings and hot afternoons
• Prolonged sunlight exposure during staging and loading
• Handling stress — set down on tailgates, stepped on, dropped
• Transport and storage between fields and seasons

None of that is unusual duty. It is simply what a season of commercial spreading does to a part that gets touched more times per day than almost anything else on the aircraft. Damage accumulates in a way that is easy to normalize: a hairline crack at a stress point, a latch that needs a firmer push than it used to, a cover that sits proud on one side and has to be pressed down. Each of those is a small thing on its own, and together they describe a closure that is no longer closing.

A sound Spread Tank Cover helps maintain:

• Granular product that stays dry from load to release
• Consistent, free-flowing material at the metering point
• Full loads that arrive at the field intact
• Spread rates that match what was programmed
• A hopper interior kept clean of water and debris
• Predictable aircraft weight through the flight
• Application records that reflect the work actually done
• Increased fleet readiness
• Maximum aircraft uptime

For operators running spreading work at volume, a hopper that closes properly is the baseline every other setting is built on.

---

⚙️ Functional Purpose

The Spread Tank Cover keeps product in and moisture out. That is the whole function, and both halves of it carry real consequences. A cracked, warped, or missing cover lets granular product take on moisture — which clumps and clogs metering — or spill in flight.

The component helps:

• Close and seal the top of the T50 spread tank
• Keep granular product dry through loading and flight
• Prevent moisture from reaching the load in the hopper
• Stop clumping that clogs and disrupts metering
• Contain product against airflow and maneuvering forces
• Prevent in-flight spill from the tank top
• Keep dust, debris, and foreign objects out of the hopper
• Protect the free-flowing condition of seed and fertilizer
• Support consistent, repeatable spread rates
• Maintain accurate payload weight through the mission
• Keep rain and dew out of a loaded aircraft parked between flights
• Restore a proper closure after a cover is cracked or lost
• Return the spreading system to factory configuration
• Support preventative maintenance ahead of the spreading window
• Keep the spreading system field-ready

Everything the spreading system does downstream assumes dry, uniform, free-flowing material arriving at the metering point at a predictable rate. That assumption is not something the aircraft can verify. It cannot see moisture in the hopper, it cannot detect a load that has caked into a bridge over the outlet, and it cannot tell that product left through the top instead of the bottom. It applies the rate it was given and logs the job as flown.

That is why a cover problem shows up as a spread quality problem rather than as a cover problem, and why it is worth confirming the closure before chasing the mechanism.

A damaged, warped, or missing cover may contribute to:

• Moisture reaching granular product in the hopper
• Clumping and bridging that clogs metering
• Uneven or surging feed to the spreading mechanism
• Spread rates that drift from the programmed setting
• Product lost from the tank top in flight
• Streaked, skipped, or double-covered application patterns
• Residue and caked material left inside the tank
• Re-application costs and wasted material
• Unexpected downtime during the spreading window

Replacing the cover restores the closed, dry hopper the spreading system was engineered around.

---

⚠️ Common Replacement Indicators

Replacement may be recommended when operators observe:

• A cracked, warped, or broken tank cover
• A cover that no longer seats correctly on the tank
• A cover that will not latch, or that pops loose
• A closure that needs unusual force to secure
• A cover sitting proud or uneven on one side
• Moisture reaching granular product inside the hopper
• Clumped or caked material after a wet night or a rain event
• Product spill from the tank top in flight
• Granular residue on the airframe or tank shoulders after a mission
• Wear, gouging, or deformation at the sealing surfaces
• Impact or handling damage from loading operations
• A lost or missing cover
• Maintenance or pre-season inspection findings
• Spreading system rebuild or reassembly projects

Common causes of tank cover failure include handling — the cover is removed and refitted on every load, and it spends its life being set down on tailgates and truck beds, stepped over, and closed in a hurry. Beyond that, repeated flex at the latch and closure points fatigues the cover over hundreds of cycles, granular product and dust abrade and pack the sealing surfaces so the cover no longer sits flush, moisture and chemical residue work at the interfaces, airflow and vibration in flight load the closure continuously, and temperature swings and long sun exposure act on the part season after season. Failures tend to progress rather than arrive: first the cover needs a firmer push, then it works loose in flight, then a stress line appears, then it cracks through. Confirm before you order — this part is DJI number YC.JG.ZS003495, listed for the DJI Agras T50 spreading system. Match the number to your parts diagram or to the label on your existing part before ordering.

For commercial operators, a replacement cover costs a small fraction of one hopper of ruined product — and far less than a re-application.

---

📐 Specifications

DJI Material Number: YC.JG.ZS003495

Part: Spread Tank Cover

Component Type: Spreading system hopper cover / seed tank lid

Compatibility:

• DJI Agras T50 spreading system (supplier-listed)

Assembly: Spreading system

Package Quantity: 1 Spread Tank Cover

Installation Area: Top opening of the DJI Agras T50 spread (seed) tank

Function: Closes and seals the spread tank against weather and in-flight spill, keeping granular product dry and contained

Construction: Original DJI OEM spread tank cover

Mounting Type: Direct OEM replacement — seats and latches at the factory tank-top position

Application: Agricultural drone spreading system maintenance and repair

Condition: Brand new — never installed, never flown

Product Classification: Spreading system parts

---

🚜 Necessary For

This component is ideal for:

• DJI Agras T50 operators
• Operators running the T50 spreading system
• Farmers spreading their own acres
• Commercial spreading contractors
• Cover crop seeding operations
• Granular fertilizer applicators
• Rice and paddy seeding operations
• Pasture and rangeland seeding crews
• Agricultural aviation companies
• Fleet maintenance managers
• Agricultural drone technicians
• DJI Agras service providers
• Drone repair facilities
• Precision agriculture businesses
• Preventative maintenance programs
• Professional agricultural drone operators

Especially valuable during:

• Fall cover crop seeding windows
• Spring fertilizer application
• Rice seeding season
• Pasture and forage overseeding
• Spray-to-spread system conversions
• Pre-season spreading system inspections
• High-tempo contract spreading
• Wet-weather operating stretches

A spare cover on the shelf is the difference between finishing the load and parking the aircraft.

---

💡 Why This Part Matters

Accurate spreading is a chain of assumptions, and the tank cover holds up the first link. Dry, free-flowing product meters predictably. Product that has taken on moisture does not — it clumps, it bridges, it feeds in surges, and it can stop feeding entirely. Every setting downstream of the hopper was chosen on the assumption that the material arriving at the metering point behaves the way it did in the bag. A bad cover breaks that assumption before the aircraft ever leaves the ground, and it does it quietly.

What makes it worth attention out of proportion to its price is that its failures do not look like its own. The operator sees a spread pattern that is streaked or uneven, a rate that will not hold, a hopper that will not empty cleanly, or product on the airframe after a flight. The natural response is to look at the metering, the spreading mechanism, the settings, or the product itself. Those are all more expensive places to look, and if the real cause is a cover that no longer seats and a load that got damp overnight, none of that work will fix anything. The pattern comes back on the next wet morning.

The Spread Tank Cover helps maintain:

• A hopper that stays closed and dry
• Product that meters the way it was set to
• Full loads that reach the field intact
• Spread patterns that match the plan
• Application records that reflect real work
• Professional fleet standards
• Increased aircraft uptime
• Reliable commercial performance

Flying with a damaged or missing cover, operators risk:

• Paid-for product lost out of the tank top
• Loads ruined by moisture before they are flown
• Clogged metering and interrupted feed
• Uneven coverage and customer callbacks
• Re-application at the operator's own cost
• Time spent chasing the wrong component
• Interrupted spreading windows
• Lost acres during a narrow seasonal window

For practical, hardworking operators, the value is simple:

Protect the cover. Protect the load. Protect the pattern. Protect the season.

Professional DJI Agras operators understand that spreading accuracy starts at the hopper, not at the disc. Keeping a spare Spread Tank Cover in the parts box means a damaged lid never turns into a lost load or a lost afternoon — and in a seeding window measured in days, that difference is what separates a good season from a frustrating one.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the official DJI Agras parts documentation for this component.

Canonical product name: DJI Agras T50 OEM Spread Tank Cover (YC.JG.ZS003495)

DJI material number: YC.JG.ZS003495

Component: Spread Tank Cover

Product category: Spreading System Parts

Compatible aircraft: DJI Agras T50

Installed position: Top opening of the DJI Agras T50 spread (seed) tank

Primary function: Closes and seals the spread tank against weather and in-flight spill, keeping granular product dry and contained

Condition: Brand new — never installed, never flown

Quantity supplied: 1 Spread Tank Cover

Part classification: Genuine DJI OEM replacement component

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: YC.JG.ZS003495; DJI YC.JG.ZS003495; YC.JG.ZS003495 DJI Agras; DJI Agras T50 Spread Tank Cover; T50 Spread Tank Cover; DJI T50 spread tank cover replacement; DJI Agras Spread Tank Cover; Spread Tank Cover OEM; Spread Tank Cover replacement part

Definition: The Spread Tank Cover (DJI material number YC.JG.ZS003495) is the genuine DJI OEM component fitted at Top opening of the DJI Agras T50 spread (seed) tank on the DJI Agras T50, supplied new by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free and fast shipping to American operators.

Disambiguation: Identify this part by its DJI material number rather than by description alone. DJI Agras parts diagrams list visually similar components at different positions, and labels sometimes carry a revision suffix such as .01 or .F — that is the same part, so match the base number. For this listing the base number is YC.JG.ZS003495. Confirm the aircraft model is DJI Agras T50 before ordering.

---

🔍 SEO Keywords

DJI Agras T50

DJI Agras T50 Parts

DJI T50 Parts

DJI Agras T50 OEM Parts

DJI Agras T50 replacement parts

Agras T50 parts USA

YC.JG.ZS003495

DJI YC.JG.ZS003495

YC.JG.ZS003495 replacement

DJI Agras YC.JG.ZS003495 part

DJI Agras Spread Tank Cover

Spread Tank Cover OEM

spread tank cover replacement

spread tank cover for sale

DJI Spread Tank Cover

T50 Spread Tank Cover

DJI T50 Spread Tank Cover

DJI Agras T50 Spread Tank Cover OEM

Spreading System Parts

DJI Agras Spreading System Parts

T50 Spreading System Parts

DJI Agras OEM Parts

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

DJI Agras parts New Mexico

agricultural drone parts Albuquerque NM

DJI Agras T50 OEM Spread Tank Cover (YC.JG.ZS003495) Canada

DJI Agras T50 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T50 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Agras T50 Spread Tank Cover, and what is its DJI part number? It is the cover that closes the top of the DJI Agras T50 spread (seed) tank, keeping granular product dry and contained and sealing the hopper against weather and in-flight spill. Its official DJI material number is YC.JG.ZS003495, verified against the official DJI Agras T50 parts list. Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, stocks it in brand new condition, one cover per order.

What does the Spread Tank Cover fit? Supplier-listed fitment is the DJI Agras T50 spreading system, where it installs at the top opening of the spread tank. Match DJI material number YC.JG.ZS003495 to your parts diagram or to the label on your existing cover before ordering. A .01 or .F suffix on a label is the same part — the base number is YC.JG.ZS003495.

How do I tell a bad tank cover from a metering or spreading mechanism problem? Look at where the evidence is and when the symptom appears. A cover problem leaves physical traces above the product path: granular residue on the tank shoulders or the airframe after a flight, a cover that sits proud or has to be forced to latch, a visible crack or warp, moisture or caked material in a hopper that was loaded dry, or a load that arrives lighter than it went on. It is also weather-linked and load-linked — it shows up after a wet night, after a hard maneuver, or on the loads where the lid was closed in a hurry, and it often clears up entirely on a dry, calm day with the same settings and the same product. A genuine metering or mechanism problem behaves the opposite way. It is consistent regardless of weather, it repeats with dry product straight out of the bag, it can usually be reproduced on the ground with the tank open, and there is nothing wrong with the closure or the tank top. The distinction is worth making before spending anything, because the two failures produce nearly identical complaints — uneven spread, rate that will not hold, feed that surges or stops — and only one of them costs the price of a lid. If the cover is cracked, will not seat, or will not latch, replace it and re-fly a known-dry load before pulling anything apart downstream.

Why does a cracked cover matter if the tank still holds product? Because holding product on the ground and holding it in flight are different jobs, and because moisture does damage no crack is needed to explain. A cover that seats imperfectly still keeps most of the load in a tank sitting on a trailer. In the air, with rotor wash across the tank top and the aircraft banking and accelerating, that same gap lets material work its way out — and overnight, or in dew or rain, it lets water in. Damp granular product cakes and bridges, and caked product does not meter at the rate it was set to. The cover does not have to be missing to stop doing its job.

Is the cover ready to install out of the box? It ships brand new, never installed and never flown, in protective packaging as a direct OEM replacement for the factory tank-top position. Before the first loaded flight, clear granular residue and dust from the tank rim and the sealing surfaces so the new cover seats flush, confirm it latches positively without needing unusual force, and check that it is still secure after the first mission — a closure that works loose in flight will usually show it in the first cycle.

Why does a cover problem show up as a spread pattern problem? Because everything downstream of the hopper assumes dry, free-flowing product, and nothing in the system verifies that assumption. The aircraft cannot see moisture in the tank, cannot detect a load that has caked into a bridge over the outlet, and cannot tell that material left through the top rather than the bottom. It applies the rate it was given and logs the flight as flown. The failure is at the lid, but the only place the operator sees it is in the field.

What are the signs a T50 spread tank cover needs replacing? A cracked, warped, or broken cover, a cover that no longer seats or latches, a closure that needs unusual force, a cover sitting proud or uneven on one side, moisture reaching the granular product, clumped material after a wet night, product spilling from the tank top in flight, granular residue on the airframe after a mission, wear or deformation at the sealing surfaces, impact damage from loading, or a cover that is simply lost.

What causes these covers to fail? Handling is the leading cause — the cover comes off and goes back on at every refill, and it spends its life being set on tailgates, stepped over, and closed under time pressure. Repeated flex at the latch and closure points fatigues the cover over hundreds of cycles, granular product and dust abrade and pack the sealing surfaces so it no longer sits flush, moisture and chemical residue work at the interfaces, airflow and vibration load the closure continuously in flight, and temperature swings and sun exposure act on it across the season. Failure usually progresses — a firmer push, then a lid that works loose, then a stress line, then a crack through.

Is the DJI Agras T50 OEM Spread Tank Cover (YC.JG.ZS003495) also available in Canada? Yes. Ares Acres ships this T50 OEM Spread Tank Cover to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T50 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy a genuine OEM DJI Agras T50 Spread Tank Cover in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking genuine DJI Agras spreading system parts for American farmers, aerial applicators, and commercial drone fleets. Free and fast shipping is included for all U.S. customers, with same-day shipping and tracking on in-stock parts. This part is listed under DJI material number YC.JG.ZS003495. Ares Acres also ships to Canada with free shipping.