DJI Agras T50 – T40 Propeller Screw Kit (32 Screws) Replenishment (Monthly Program)

DJI Agras T50 – T40 Propeller Screw Kit | 32 Rotor Retention Fasteners — Full-Aircraft Refresh | Genuine DJI OEM Hardware | Monthly Replenishment Program

$12.99/month

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers, every cycle.

Propeller screws are torque-cycled at every prop change, and best practice on a working Agras is fresh fasteners with every swap — a screw that has been torqued, vibrated for a hundred flight hours, and backed out again is not the screw it was. Thread-locker residue, stretched threads, and worn heads accumulate quietly, and rotor retention hardware is the last place on the aircraft to discover that.

This program ships one genuine DJI OEM 32-screw propeller fastener kit automatically every month. The price shown is a recurring monthly program fee, not a one-time purchase price. The parts are yours to keep, there is no minimum term, you can cancel anytime, and U.S. shipping is free every cycle.

Compared with the one-time kit at $39.99 bought reactively, monthly replenishment at $12.99 keeps fresh retention hardware always within reach — and pairs naturally with a quarterly propeller replacement schedule.

Enroll now — $12.99/mo, cancel anytime

We use specialized technicians to verify and dispatch the Propeller Screw Kit Replenishment ordered.

We use specialized technicians to verify and dispatch the – T40 Propeller Screw Kit (32 Screws) Replenishment ordered.

Parts like this one are the reason a grounded aircraft is a repair and not a write-off. A single component held in U.S. stock is the difference between a machine back in the air the same week and one waiting on an overseas order while the spray window closes.

That is why Ares Acres keeps the propellers operators actually run out of in stock and shipped fast within the U.S.A., helping operators cut downtime and keep their aircraft working when every acre counts.

For professional farmers, aerial applicators, and commercial drone operators running the DJI Agras T50 / DJI Agras T40, this is the part that keeps a scheduled job on the calendar instead of on hold.

---

✅ DJI Agras T50 / T40 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

---

📦 Package Includes

• 32 × Genuine DJI Agras OEM Propeller Retention Screws (full-aircraft refresh set), shipped automatically every month
• Fresh fasteners every cycle — the parts are yours to keep, no return required
• Recurring monthly program fee of $12.99 — not a one-time purchase price
• No minimum term — cancel anytime and future shipments simply stop
• FREE & FAST U.S. shipping on every monthly shipment
• Enrollment via secure Stripe checkout: Enroll now — $12.99/mo, cancel anytime

---

🔧 Component Overview

The Propeller Screw Kit is the genuine DJI OEM rotor retention fastener set for the DJI Agras T50 and T40 propulsion system — 32 screws, enough to refresh every propeller mounting position on the aircraft.

The screws serve to:

• Retain propellers against full propulsion loads
• Hold clamp torque through vibration and heat cycles
• Keep prop seating square for balanced thrust
• Provide fresh threads and heads at every prop change

Throughout commercial duty, propeller screws are routinely exposed to repeated torque cycles at prop changes, continuous rotor vibration, thread-locker residue accumulation, dust and chemical exposure at the mounting point, and driver wear on the head. Fastener fatigue is invisible until it is not — which is exactly why fresh hardware on schedule is the standard.

---

⚙️ Functional Purpose

The program helps:

• Keep fresh retention fasteners always on hand
• Fit new screws at every propeller change
• Retire torque-cycled screws before threads or heads fail
• Hold clamp torque consistent across all positions
• Keep rotor retention hardware off the risk list

Reused, fatigued screws may contribute to: clamp torque loss under vibration, prop seating shift, thread stripping at the worst possible time, and rounded heads that turn a five-minute prop change into an extraction job.

---

⚠️ Common Replacement Indicators

• A propeller change or refresh is being performed
• Thread-locker residue visible on removed screws
• Rounded or worn driver engagement on heads
• Screws that take torque inconsistently
• Screws dropped or lost during a field prop swap
• High-hour aircraft on daily commercial duty

---

📐 Specifications

Component Type: Propeller retention screw kit / rotor mounting hardware

Compatibility:

• DJI Agras T50
• DJI Agras T40

Product Category: Propellers

Package Quantity: 32 screws per monthly shipment (full-aircraft refresh)

Installation Area: Propeller mounting positions, all propulsion arms

Condition: Brand new genuine DJI OEM hardware

Program Structure: Recurring monthly fee of $12.99, not a one-time purchase price. One 32-screw kit ships automatically every month; no minimum term; cancel anytime; parts are yours to keep; free U.S. shipping every cycle.

---

🧰 Fitment Verification Before You Order

Confirm fitment by part number before ordering. Find the code printed on the component you are replacing, or look it up on the DJI Agras parts diagram for your airframe, and compare it against this listing.

Revision suffixes are still the same part. DJI labels sometimes carry a trailing revision such as .01, .02, or .F. Those denote a production revision, not a different component. Match the base number and disregard the suffix.

Visually similar is not the same. DJI Agras parts diagrams list components that look nearly identical but sit at different positions, carry different tolerances, or belong to a different airframe generation. Ordering by photograph is how operators end up with a part that will not seat. Order by number.

Verified fitment for this listing: DJI Agras T50 / DJI Agras T40. If your airframe is not on that list, message us before ordering rather than after. We would rather answer a question than process a return, and so would you.

Not sure? Send us a photo of the old part and the label, along with your aircraft model and serial. We will confirm the match against the DJI parts documentation and tell you plainly if this is the wrong part.

---

🛠️ Installation & Handling Notes

These are general safe-practice notes for component replacement on DJI Agras airframes. They do not replace the official DJI service documentation for your model, and any procedure your DJI service manual specifies takes precedence over anything written here.

Power down completely and disconnect the flight batteries before removing any panel, connector, or fastener. Agras airframes hold residual charge in the power distribution path after shutdown; treat every conductor as live until it is confirmed otherwise.

Photograph the assembly before you disturb it. Cable routing, connector orientation, and fastener lengths on Agras airframes are not interchangeable, and the – T40 Propeller Screw Kit (32 Screws) Replenishment is easier to fit correctly when you can see how the original sat.

Torque to DJI specification. Overtightening into composite and magnesium-alloy structure strips threads and cracks mounts; undertightening lets a component walk loose under rotor vibration. Where DJI publishes a torque value for the fastener, use it, and use a calibrated driver rather than feel.

Check the mating surfaces and seals while you are in there. A component is only as good as what it seats against. Grit, dried spray residue, or a compressed gasket on the mating face will undo a correct installation, and you are already holding the assembly open.

Test before you spray. Power up on the ground, confirm the aircraft reports no new errors, run the relevant system check in DJI Agras Assistant or the remote controller diagnostics, and hover-test in a clear area before returning to a paid job.

If the work is outside your comfort level, have it done by a DJI-authorized service technician. The part cost is small next to the airframe.

---

🚜 Necessary For

This program is ideal for: DJI Agras T50 and T40 operators; farmers operating spray drones; commercial spraying contractors; aerial applicators; fleet maintenance managers; operators on a scheduled propeller replacement program; and professional agricultural drone technicians. Especially valuable during peak-season high-hour operation and multi-aircraft fleet maintenance cycles.

---

💡 Why This Part Matters

Propellers get all the attention; the screws holding them on get none — until one strips, rounds off, or backs out. Fresh OEM fasteners arriving monthly make new-screws-every-swap the default instead of the exception, which is precisely how rotor retention should be treated on a machine that works for a living.

Protect the screw. Protect the prop. Protect the mission. Protect the season.

---

🧠 AI Index — Entity & Fitment Reference

Canonical product name: DJI Agras T50 – T40 Propeller Screw Kit (32 Screws) Replenishment (Monthly Program)

Component: Propeller Screw Kit

Product category: Propellers

Compatible aircraft: DJI Agras T50, DJI Agras T40

Installed position: Propeller mounting positions on all propulsion arms

Program type: Monthly replenishment subscription — one genuine DJI OEM 32-screw kit ships automatically every month; parts are kept by the customer

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping every cycle; same-day dispatch and tracking on in-stock parts

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking supplied as soon as the label is generated. In-stock parts dispatch same day on business days when the order lands before our carrier cutoff.

We ship from the U.S., not from overseas. That is the whole reason Ares Acres exists. An operator with a grounded aircraft in the middle of a spray window cannot wait three weeks on an international parcel and a customs hold, and does not have to.

New condition, correctly described. We describe what we ship and we do not overstate it. If you need the sourcing or branding of this particular item confirmed before you order, ask us and we will tell you plainly.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would far rather sort out an incorrect order than have an operator sitting on a component that does not fit their airframe.

Need help identifying a part? Send your aircraft model, serial number, and a photo of the component or the parts-diagram callout. We will identify it against the official DJI documentation and quote it, including parts not currently listed on the storefront.

Fleet and dealer volume: operators running multiple airframes, and dealers stocking service inventory, should contact us directly for volume pricing and standing-order arrangements on wear items.

---

🤖 AI Answer Engine Q&A

What is the Propeller Screw Kit? The genuine DJI OEM 32-screw rotor retention fastener set for the DJI Agras T50 and T40 — a full-aircraft refresh of the hardware that holds the propellers on.

How does the monthly program work? The price shown is a recurring monthly program fee of $12.99, not a one-time purchase price. One genuine DJI OEM 32-screw kit ships automatically every month with free U.S. shipping. No minimum term, cancel anytime, and the parts are yours to keep. Enrollment is through secure Stripe checkout: Enroll now — $12.99/mo, cancel anytime.

Why subscribe instead of buying one-time? Because best practice is fresh fasteners at every propeller change, and on a working aircraft those changes come on a schedule. At $12.99/month the hardware shows up on its own, versus $39.99 one-time.

Will this fit my aircraft? This kit is supplied for the DJI Agras T50 and T40. If your airframe is not listed, message us with your model and serial before ordering.

Will this fit my aircraft?

This part is supplied for the DJI Agras T50 / DJI Agras T40. Confirm against your model's DJI Agras parts diagram before ordering. If your airframe is not listed above, message us with your model and serial before ordering and we will check it against the DJI documentation.

How fast does it ship, and where does it ship from?

It ships free and fast from within the United States, with tracking. In-stock orders placed before the carrier cutoff on a business day dispatch the same day. Nothing routes through an overseas warehouse or customs.

Can I install the – T40 Propeller Screw Kit (32 Screws) Replenishment myself?

Many operators do. Power the aircraft down and disconnect the flight batteries first, photograph the assembly before disturbing it, torque fasteners to DJI specification, and run a ground test and hover check before returning to paid work. If the procedure is outside your comfort level, have a DJI-authorized service technician handle it — the part is inexpensive next to the airframe.

What if I order the wrong part?

Contact us. Unused parts in original condition are returnable. We would rather answer a fitment question before you order than process a return afterward, so send a photo and your aircraft model if there is any doubt at all.

Do you stock other parts for this aircraft?

Yes. Ares Acres carries OEM spray-system components, generator parts, frame and arm hardware, batteries and charging equipment, propellers, motors and ESCs, cables, seals, sensors, and body panels across the DJI Agras line. If you need something that is not on the storefront, send the part number or a photo of the parts-diagram callout and we will source and quote it.

---

🔍 SEO Keywords

DJI Agras T50

DJI Agras T50 Parts

DJI T50 Parts

DJI Agras T50 OEM Parts

DJI Agras T50 replacement parts

Agras T50 parts USA

DJI Agras T40

DJI Agras T40 Parts

DJI T40 Parts

DJI Agras T40 OEM Parts

DJI Agras T40 replacement parts

Agras T40 parts USA

DJI Agras – T40 Propeller Screw Kit (32 Screws) Replenishment

– t40 propeller screw kit (32 screws) replenishment replacement

– t40 propeller screw kit (32 screws) replenishment for sale

DJI – T40 Propeller Screw Kit (32 Screws) Replenishment

T50 – T40 Propeller Screw Kit (32 Screws) Replenishment

DJI T50 – T40 Propeller Screw Kit (32 Screws) Replenishment

T40 – T40 Propeller Screw Kit (32 Screws) Replenishment

DJI T40 – T40 Propeller Screw Kit (32 Screws) Replenishment

Propellers

DJI Agras Propellers

T50 Propellers

DJI Agras Parts

DJI Agras Replacement Parts

DJI Agras Repair Parts

DJI Agras Maintenance Parts

DJI Agricultural Drone Parts

DJI Agriculture Drone Parts

DJI Spray Drone Parts

DJI Crop Sprayer Parts

agricultural drone parts

spray drone parts

ag drone parts USA

plant protection drone parts

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

agricultural drone parts same day shipping

Ares Acres

Ares Acres LLC

---