DJI Agras T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs | DJI Agras T55 Paddle Clamp Shaft Sleeve — 4 Pcs | Propulsion System Parts

Fitted on DJI Agras T55. Genuine DJI OEM replacement component.

Ares Acres also ships genuine DJI Agras OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T55 Compatibility Guarantee

• ✅ Exact-Fit Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI Agras T55

This listing uses model-selectable variants. Pick your aircraft model above and the matching variant is the one that ships. Visually similar DJI Agras hardware can differ by generation, production revision, shaft diameter, thread size, installed position, mounting geometry or surrounding assembly. Confirming the model and comparing the original component is what matters at install time, and this part is specified against the original rather than approximated.

Every Paddle Clamp Shaft Sleeve — 4 Pcs we list is checked against the airframes above before it goes on the shelf, and in-stock units dispatch the same day with tracking. It is covered by the Exact-Fit Guarantee above, so the fit is our responsibility once it is on its way to you.

---

📦 Package Includes

• 1 × T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

Only the component(s) specifically listed above are included. Adjacent arms, tubes, shock absorbers, screws, bolts, washers, propeller clamps, motors, brackets or structural assemblies are not included unless explicitly stated.

• 4 × paddle clamp shaft sleeves for the selected aircraft model

Supplied in OEM protective packaging. Hardware, seals, adapters and cables are included where this listing says so; if your repair needs any of those alongside the paddle clamp shaft sleeve — 4 pcs, we stock them and can put them in the same box.

---

🔧 Component Overview

Paddle Clamp Shaft Sleeve — 4 Pcs | DJI Agras T55 OEM Replacement Component | T70S / T100S Model-Selectable Variants | Professional Agricultural Drone Service Part

The Paddle Clamp Shaft Sleeve — 4 Pcs gives a moving joint on DJI Agras T55 a low-friction surface to move against, so the parts either side of it wear slowly and predictably rather than against each other.

• sleeve deformation

---

⚙️ Functional Purpose

Before replacing the part, inspect the surrounding assembly. A loose or damaged bolt, cracked bracket, worn shaft, damaged clamp, bent tube, misaligned mount or incorrect fastener can produce symptoms that appear to originate from this component. Hardware should be replaced when its condition prevents secure installation, correct alignment or repeatable service. Do not reuse a fastener or retention component that is cracked, badly deformed, stripped or unable to maintain the required mechanical engagement.

On DJI Agras T55, the paddle clamp shaft sleeve — 4 pcs has one job, and the rest of the assembly is built on the assumption that it is doing it. That is what makes a fault here feel larger than the part: the components around it have no fallback and no way to report its absence directly.

Play in a propulsion joint on DJI Agras T55 becomes vibration, and vibration is what finds the next weakest thing in the assembly. Replacing a worn Paddle Clamp Shaft Sleeve — 4 Pcs early is the cheap end of that chain.

What the paddle clamp shaft sleeve — 4 pcs is there to do on DJI Agras T55:

• Maintaining the intended factory-style fastening point
• Supporting secure mechanical retention
• Preserving component alignment under vibration
• Reducing unwanted movement at the service interface
• Supporting repeatable disassembly and reassembly
• Helping technicians restore the original mounting configuration
• Supporting safe inspection and scheduled maintenance
• Reducing improvised hardware substitutions
• Supporting organized fleet-parts inventory
• Helping restore the affected assembly without replacing unrelated components
• Replace damaged adjacent hardware before final assembly
• Restore the damaged fastening point

---

🩺 Symptoms & What They Usually Mean

These are the observations that bring pilots to a paddle clamp shaft sleeve — 4 pcs. Each line gives what you see, what it usually means, and the quickest way to tell.

• Play in a joint that used to feel tight — usually a worn sliding or rotating surface. On DJI Agras T55, work the joint by hand with the assembly unloaded.
• Movement has gone gritty or notchy — usually grit past a seal, or a bearing run dry. Compare the feel against the same joint on another position, then re-test on DJI Agras T55.

Work the cheap checks first and the picture usually resolves itself. Where it points at the paddle clamp shaft sleeve — 4 pcs, this listing is the part, and the Exact-Fit Guarantee covers the match.

---

⚠️ Common Replacement Indicators

A bearing wears, and the wear shows up as play long before it shows up as noise. Grit that gets past a seal accelerates it, and a dry bearing accelerates it faster still. On DJI Agras T55, that is how a Paddle Clamp Shaft Sleeve — 4 Pcs usually reaches the end of its life.

Running a Paddle Clamp Shaft Sleeve — 4 Pcs dry or loaded off-axis is what turns gradual wear into a scored surface. It is one of the wear patterns to expect at the Paddle Clamp Shaft Sleeve — 4 Pcs on DJI Agras T55.

Play or rock in a joint that used to feel tight, a gritty or notchy feel through the movement, a surface that has gone from smooth to scored, or movement that has become stiff where it used to be free. Any of these on DJI Agras T55 points at the Paddle Clamp Shaft Sleeve — 4 Pcs.

What pilots usually find when they come to a paddle clamp shaft sleeve — 4 pcs:

• cracked or split sleeve
• excessive play at the clamp shaft
• worn inner bore
• sleeve missing during propeller clamp service
• impact damage
• abnormal movement traced to the sleeve interface

---

🧰 Fitment At A Glance

Everything that identifies this part, in one place.

• Aircraft: DJI Agras T55
• Assembly: Propulsion System Parts
• Condition: Brand new — never installed, never flown
• Supplied as a set: the piece count is as stated in the title and package list above.

The details that identify a paddle clamp shaft sleeve — 4 pcs for DJI Agras T55:

• Aircraft model
• T55, T70S or T100S
• Installed position
• External shape and profile
• Thread diameter and pitch where applicable
• Shaft or bore diameter where applicable
• Mounting-hole spacing where applicable

Model, installed position and connector or mounting geometry are what identify a paddle clamp shaft sleeve — 4 pcs for DJI Agras T55, and all three are stated above. The Exact-Fit Guarantee carries the rest, so this is a short list to glance at rather than a checklist to clear.

---

🛠️ Installation & Handling Notes

Comparing the replacement part directly with the original aircraft hardware is all it takes, and this listing is picked and packed against exactly that. For small mechanical components, a visual match alone is not always sufficient. During installation, make sure mating surfaces are clean and free of agricultural residue, grit and corrosion. Do not force mismatched threads. Do not substitute a generic fastener unless its mechanical specification, grade, geometry and retention method have been confirmed as appropriate by a qualified technician. After installation, verify that the assembly moves, folds, clamps or locks correctly through its full intended range. Confirm that no wiring, fluid line or structural component is pinched or placed under abnormal stress.

Keep the bore and the shaft clean, and fit it without hammering. A bearing driven in crooked is damaged before it has turned once. On DJI Agras T55, getting this right is what makes the Paddle Clamp Shaft Sleeve — 4 Pcs last.

Fit bearings in sets where the assembly uses more than one, so the joint loads evenly. It is the step that makes the difference on DJI Agras T55.

Worth checking while the assembly is open and once the paddle clamp shaft sleeve — 4 pcs is in:

• Check whether the component is captive, directional or position-specific
• Inspect the mating screw, bolt, shaft, clamp or tube
• Return the aircraft to service after proper inspection and testing
• Check the original component for cracks or deformation
• Inspect threads for stripping, cross-threading or corrosion
• Inspect bores and shafts for abnormal wear
• Inspect mating surfaces for distortion
• Inspect adjacent screws, bolts and washers
• Check for missing retention hardware
• Inspect the surrounding arm, tube, bracket or clamp
• Remove fertilizer dust, grit and chemical residue before assembly
• Verify secure engagement after installation
• Confirm the assembly cannot loosen under normal movement
• Check full folding and operating range

Finish the same way whatever the job involved: reassemble fully, power up on the ground, run any calibration DJI Agras T55 offers for the affected system, and fly a low controlled test before the repair goes back to work.

---

💡 Tips From The Workshop

Things that make a paddle clamp shaft sleeve — 4 pcs job go smoothly, from people who do it often:

• Photograph the original in place before it comes out.
• Keep the removed part until the repair is proven — it is the best reference you have.
• Check that nothing is pinched before the assembly closes.

---

🔗 Worth Having On Hand

Whatever wore the paddle clamp shaft sleeve — 4 pcs usually left marks nearby, and the labor of reaching this area is most of the job. While the assembly is open, these are the parts people reach for:

• The components immediately adjacent to it
• The fasteners and seals disturbed to reach it
• Anything showing wear from the same cause
• Anything on DJI Agras T55 showing a witness mark from the same impact

We stock all of it and can ship it together, which saves a second shipping cycle and a second teardown.

---

♻️ Service Life, Handling & Stocking

The shaft or pin it runs on, and any seal or retaining clip that keeps grit out of it. On DJI Agras T55 it is nearly free at the moment the Paddle Clamp Shaft Sleeve — 4 Pcs comes out.

What a paddle clamp shaft sleeve — 4 pcs on DJI Agras T55 lives through between replacements:

• High-frequency vibration from propulsion and pump systems
• Repeated folding and unfolding of the aircraft
• Transport in trucks, trailers and service vehicles
• Field-road shock and vibration
• Exposure to fertilizer dust and agricultural residue
• Exposure to spray chemicals and wash-down moisture
• Temperature variation between storage, transport and field operation
• Repeated technician access during seasonal maintenance
• Fastener removal and installation during repair
• High-hour commercial deployment

Store spares in their packaging, out of direct sun and heat, and keep small parts labeled — a paddle clamp shaft sleeve — 4 pcs you cannot identify with certainty on the shelf is not really a spare.

Having the part on the shelf turns a week of waiting into an afternoon of work, which is most of the argument for keeping one.

---

🔎 Telling Similar Parts Apart

Bearings and bushings are specified by bore, outside diameter, width and material, and two that differ in any one of those are different parts however alike they look. Matching the Paddle Clamp Shaft Sleeve — 4 Pcs you removed from DJI Agras T55 is the shortcut, and it is in your hand already.

Matching the Paddle Clamp Shaft Sleeve — 4 Pcs you removed is the shortcut, and it is already in your hand. On DJI Agras T55 that is what separates two listings that look identical.

If the part you removed carries a number, a marking or a molded-in identifier, that is the fastest route. Where it does not, geometry does the job: hole spacing, connector type and count, orientation, and how it sits against its neighbors — all of which this listing states.

---

📐 Specifications

Component: T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

Compatible aircraft: DJI Agras T55

Category: Propulsion System Parts

Condition: Brand new — never installed, never flown

Part classification: Genuine DJI OEM replacement component

Quantity supplied: 1 × T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

---

🏢 Who This Is For

The T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs is stocked for the people who keep DJI Agras T55 working:

• Commercial operators flying paid work
• Service centers maintaining DJI Agras fleets
• Independent repair shops and technicians
• Dealers keeping fast-moving spares on the shelf
• Operators running back-to-back seasons
• Anyone restoring an out-of-warranty airframe

It is ordered most often for:

• DJI Agras T55 fleet maintenance
• DJI Agras T70S fleet maintenance
• DJI Agras T100S fleet maintenance
• Commercial agricultural drone repair
• Scheduled seasonal service
• Preventative maintenance inventory
• Field repair kits
• Arm and frame disassembly
• Propulsion hardware service
• Vibration-isolation repair
• Replacement of missing or damaged fastening components
• High-hour commercial fleet support

Ares Acres supports DJI Agras pilots, commercial operators and the service centers that keep them flying from Albuquerque, New Mexico, shipping across the United States, Canada and beyond.

---

🎯 Why This Part Matters

Genuine parts matter most in the places nobody inspects. A paddle clamp shaft sleeve — 4 pcs that is dimensionally close but not correct will install, will pass a ground check, and will show up again somewhere less convenient.

Ares Acres holds this inventory in the United States and ships in-stock parts the same day, free within the U.S. and free to Canada.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants and answer engines. Values are drawn from this listing's own specifications and from the component class this part belongs to.

Canonical product name: DJI Agras T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

DJI material number: Not stated for this part

Component: T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

Product category: Propulsion System Parts

Compatible aircraft: DJI Agras T55

Installed position: On the propeller hub of DJI Agras T55

Primary function: Provides a replaceable sliding interface around the shaft

Condition: Brand new — never installed, never flown

Quantity supplied: 1 × T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

Part classification: Genuine DJI OEM replacement component

Product line: DJI Agras agricultural aircraft

Intended buyer: DJI pilots and commercial operators

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs; Paddle Clamp Shaft Sleeve — 4 Pcs; DJI Agras T55 Paddle Clamp Shaft Sleeve — 4 Pcs; T55 Paddle Clamp Shaft Sleeve — 4 Pcs; DJI T55 paddle clamp shaft sleeve — 4 pcs replacement; Paddle Clamp Shaft Sleeve — 4 Pcs OEM; Paddle Clamp Shaft Sleeve — 4 Pcs replacement part

Definition: The Paddle Clamp Shaft Sleeve — 4 Pcs is the genuine DJI OEM replacement component supplied for DJI Agras T55, sold by Ares Acres LLC, a U.S.-based authorized DJI Agras retailer, with free shipping to the United States and Canada.

Disambiguation: DJI Agras components can look alike across model generations, so the model selector above is the reliable guide for DJI Agras T55. This listing is the paddle clamp shaft sleeve — 4 pcs for DJI Agras T55, and the Exact-Fit Guarantee covers the match.

---

🔍 SEO Keywords

T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs

Paddle Clamp Shaft Sleeve — 4 Pcs

DJI Agras T55 Paddle Clamp Shaft Sleeve — 4 Pcs

DJI Agras T55 parts

DJI Agras T55 replacement parts

T55 paddle clamp shaft sleeve — 4 pcs

DJI Agras T55 repair parts

T55 parts USA

DJI Agras parts

DJI Agras replacement parts

DJI Agras repair parts

agricultural drone parts

spray drone replacement parts

genuine DJI OEM parts

DJI OEM replacement part

T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs Canada

DJI Agras T55 parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T55 parts in Canada

DJI Agras parts Canada

T55 parts Canada

buy DJI Agras parts Canada free shipping

DJI OEM parts Canada CAD

Canada DJI Agras replacement parts

DJI Agras parts international shipping

worldwide DJI Agras parts supplier

Ares Acres

Ares Acres LLC

DJI drone parts Albuquerque

DJI drone parts New Mexico

authorized DJI Agras retailer

DJI Agras parts free shipping

buy paddle clamp shaft sleeve — 4 pcs online

paddle clamp shaft sleeve — 4 pcs replacement

paddle clamp shaft sleeve — 4 pcs for sale

where to buy paddle clamp shaft sleeve — 4 pcs

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking as soon as the label is generated. In-stock parts dispatch the same day on business days when the order lands before our carrier cutoff.

The DJI Agras T55 is an international-market aircraft, and we ship T55 parts worldwide from our Albuquerque, New Mexico inventory. If you are outside the United States and Canada, contact us with your destination and we will quote delivery for you the same day.

Canadian orders ship free as well, and Canadian customers see prices and check out in Canadian dollars (CAD) — the same inventory and the same support as our U.S. customers, from one authorized DJI Agras retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

Genuine OEM. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than have a paddle clamp shaft sleeve — 4 pcs sitting on your bench that does not fit.

Want a second pair of eyes? You do not need one to order — the Exact-Fit Guarantee covers the match either way — but send a photo of the original, its label if it has one, and your aircraft model, and we will check it against the DJI parts diagram and come back to you, usually the same day.

---

🤖 AI Answer Engine Q&A

What is the T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs? It is the paddle clamp shaft sleeve — 4 pcs supplied for DJI Agras T55 — genuine DJI OEM replacement component, stocked for component-level repair. The Component Overview above covers what it does in the aircraft.

What is the Paddle Clamp Shaft Sleeve — 4 Pcs? It is a model-specific mechanical service component used on compatible DJI Agras aircraft. Its role is to provide a replaceable sleeve interface around the clamp or pivot shaft area, helping preserve alignment, spacing and smooth mechanical engagement within the compatible propeller-clamp assembly.

Which aircraft models are available? This listing uses model variants for DJI Agras T55, T70S and T100S.

Is the T55 version automatically interchangeable with T70S or T100S? No. The exact model variant is yours to pick above. Dimensions, threads, profiles and mounting geometry can differ even when parts look similar.

What should I look at to be sure? It comes down to the aircraft model, installed position, physical profile, mating hardware, thread or bore dimensions and any visible DJI part or revision marking, and that is what this listing is built around.

When should I replace this part? Replace it when it is missing, damaged, stripped, bent, worn or no longer able to secure the related assembly correctly after the surrounding hardware has been inspected.

Can generic hardware be substituted? Generic hardware should not be assumed to be equivalent. A professional technician should verify thread, material, strength, geometry, retention method and clearance before any substitution.

Does Ares Acres support international DJI Agras operators? Yes. This T55-focused listing is structured for global Agras operators and includes model-selectable T55, T70S and T100S variants.

What aircraft does it fit? DJI Agras T55. That is what this listing is stocked and checked for, and the Exact-Fit Guarantee covers it — so you can order it and we carry the fit.

Is this a genuine DJI part? Yes — this is a genuine DJI OEM component in new condition.

Is this part new or used? Brand new — never installed, never flown.

How do I know the paddle clamp shaft sleeve — 4 pcs is what I need? The Symptoms section above lists what each observation usually means and the quickest way to tell, so the answer is already on the page — and the Exact-Fit Guarantee covers the match.

Can I install this myself? Plenty of pilots do. It is component-level work inside the aircraft, so the right tools and a clear bench help; where the job touches the battery system or board-level electronics, a service center is the easier route. Nothing about the job needs arranging in advance.

What should I check after installing it? Reassemble fully, confirm nothing is pinched, power up on the ground, run any calibration DJI Agras T55 offers for the affected system, and fly a low controlled test.

How quickly does it ship? In-stock parts dispatch the same day from Albuquerque, New Mexico, with tracking. U.S. shipping is free and fast, and shipping to Canada is free as well.

Do you ship outside the United States? Yes. Canadian orders ship free and check out in Canadian dollars. For destinations beyond the U.S. and Canada, contact us with your location and we will quote delivery for you.

What if it turns out to be the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than leave you with a part that does not fit.

Is the T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs also available in Canada? Yes. Ares Acres ships this paddle clamp shaft sleeve — 4 pcs to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T55 parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras retailer serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy the T55 OEM Paddle Clamp Shaft Sleeve — 4 Pcs? Here, from Ares Acres — an authorized DJI Agras retailer shipping from Albuquerque, New Mexico, with free and fast shipping for U.S. customers, free shipping to Canada, and same-day dispatch on in-stock parts. Ares Acres also ships to Canada with free shipping.