Shock Absorber Fixing Clip | DJI Agras T55 OEM Replacement Component | T70S / T100S Model-Selectable Variants | Professional Agricultural Drone Service Part
🌎 International DJI Agras Parts Support
Ares Acres supplies model-specific DJI Agras replacement parts, repair components, service hardware and maintenance inventory for agricultural drone operators in international markets including Latin America, Canada, Australia, Mexico, Brazil and other regions where the T55, T70S and T100S platforms are operated.
This listing is structured around a global technical parts standard rather than U.S.-first marketing. The objective is simple: help operators identify the correct part, understand where it fits, select the correct aircraft variant and return equipment to service without unnecessary guesswork.
For agricultural drone fleets, a low-cost mechanical component can become a high-cost operational problem when it prevents an arm, clamp, vibration-isolation assembly, propulsion interface or service panel from being secured correctly. Field downtime is often caused not only by major electronics, pumps or motors, but by small parts that are missing, cracked, stripped, bent or worn after repeated folding, transport, chemical exposure and maintenance.
✅ Model Compatibility
This listing uses model-selectable variants for:
- DJI Agras T55
- DJI Agras T70S
- DJI Agras T100S
Select the exact aircraft model before ordering. Visually similar DJI Agras hardware can differ by generation, production revision, shaft diameter, thread size, installed position, mounting geometry or surrounding assembly. Confirm the model and compare the original component before installation.
📦 Package Includes
- 1 × shock absorber fixing clip for the selected aircraft model
Only the component(s) specifically listed above are included. Adjacent arms, tubes, shock absorbers, screws, bolts, washers, propeller clamps, motors, brackets or structural assemblies are not included unless explicitly stated.
🔧 Component Overview
The DJI Agras T55 OEM Shock Absorber Fixing Clip is a model-specific service component used within the aircraft’s frame system. Its primary function is to holds the related shock-absorber or vibration-isolation component in its intended position so the assembly remains secured during transport, folding, deployment and agricultural flight operations.
Agricultural aircraft operate in a demanding mechanical environment. Every flight cycle, transport event, fold-and-unfold sequence and field-service action introduces repeated loads into hardware that may appear simple but still has to maintain correct fit, alignment and retention.
Common operating conditions include:
- High-frequency vibration from propulsion and pump systems
- Repeated folding and unfolding of the aircraft
- Transport in trucks, trailers and service vehicles
- Field-road shock and vibration
- Exposure to fertilizer dust and agricultural residue
- Exposure to spray chemicals and wash-down moisture
- Temperature variation between storage, transport and field operation
- Repeated technician access during seasonal maintenance
- Fastener removal and installation during repair
- High-hour commercial deployment
Because of these conditions, small fastening and retention parts can gradually wear, loosen, deform or become damaged. Replacing the affected component with the correct model-specific part helps preserve the factory-style mechanical relationship between the attached assemblies.
⚙️ Functional Purpose
The Shock Absorber Fixing Clip helps maintain secure mechanical integration within the frame system. Depending on its exact installed position, the component supports retention, alignment, clamping, spacing, fastening or controlled movement between adjacent aircraft parts.
Its functional role can include:
- Maintaining the intended factory-style fastening point
- Supporting secure mechanical retention
- Preserving component alignment under vibration
- Reducing unwanted movement at the service interface
- Supporting repeatable disassembly and reassembly
- Helping technicians restore the original mounting configuration
- Supporting safe inspection and scheduled maintenance
- Reducing improvised hardware substitutions
- Supporting organized fleet-parts inventory
- Helping restore the affected assembly without replacing unrelated components
The component is not a universal substitute for generic hardware. The correct fit depends on thread, shaft, bore, profile, installed orientation and the surrounding aircraft assembly.
⚠️ Common Replacement Indicators
Replacement may be appropriate when a qualified technician identifies one or more of the following:
- bent or deformed fixing clip
- broken clamp hardware
- clip no longer locks securely
- excessive movement at the shock-absorber mounting point
- impact damage
- corrosion or mechanical wear
- replacement during vibration-isolation service
Before replacing the part, inspect the surrounding assembly. A loose or damaged bolt, cracked bracket, worn shaft, damaged clamp, bent tube, misaligned mount or incorrect fastener can produce symptoms that appear to originate from this component.
Hardware should be replaced when its condition prevents secure installation, correct alignment or repeatable service. Do not reuse a fastener or retention component that is cracked, badly deformed, stripped or unable to maintain the required mechanical engagement.
📐 Specifications & Fitment
Canonical Product Name: DJI Agras T55 OEM Shock Absorber Fixing Clip
Product Type: Frame & Arm Parts
Compatible Variant Options: DJI Agras T55 / DJI Agras T70S / DJI Agras T100S
Primary System: frame
Condition: Brand new replacement component
Fitment: Model-specific; select the correct aircraft variant
Installation: Professional service recommended
Primary Function: Holds the related shock-absorber or vibration-isolation component in its intended position so the assembly remains secured during transport, folding, deployment and agricultural flight operations.
Important Fitment Notice: Confirm the original component’s dimensions, thread or bore size, mounting orientation, profile and installed location before ordering. DJI Agras parts can appear nearly identical while using different measurements or revisions.
🛠️ Ordering & Installation Guidance
Before ordering, compare the replacement part directly with the original aircraft hardware. For small mechanical components, a visual match alone is not always sufficient.
- Confirm the aircraft model
- Select T55, T70S or T100S correctly
- Confirm the installed position
- Compare external shape and profile
- Compare thread diameter and pitch where applicable
- Compare shaft or bore diameter where applicable
- Compare mounting-hole spacing where applicable
- Check whether the component is captive, directional or position-specific
- Inspect the mating screw, bolt, shaft, clamp or tube
- Replace damaged adjacent hardware before final assembly
During installation, make sure mating surfaces are clean and free of agricultural residue, grit and corrosion. Do not force mismatched threads. Do not substitute a generic fastener unless its mechanical specification, grade, geometry and retention method have been confirmed as appropriate by a qualified technician.
After installation, verify that the assembly moves, folds, clamps or locks correctly through its full intended range. Confirm that no wiring, fluid line or structural component is pinched or placed under abnormal stress.
🚜 Ideal Use Cases
- DJI Agras T55 fleet maintenance
- DJI Agras T70S fleet maintenance
- DJI Agras T100S fleet maintenance
- Commercial agricultural drone repair
- Scheduled seasonal service
- Preventative maintenance inventory
- Field repair kits
- Arm and frame disassembly
- Propulsion hardware service
- Vibration-isolation repair
- Replacement of missing or damaged fastening components
- High-hour commercial fleet support
- Technician parts inventory
- Agricultural service centers
These small components are especially useful to keep in service inventory because the aircraft may be otherwise operational while remaining grounded by one missing or damaged retention part.
💡 Why This Part Matters
Agricultural drone reliability depends on hundreds of individual mechanical interfaces working together. An aircraft can have functional motors, pumps, radar, batteries and control electronics yet still be unavailable if a clamp, nut, sleeve or fixing clip cannot hold the surrounding assembly correctly.
The Shock Absorber Fixing Clip helps restore the mechanical integrity of the affected frame interface. Using the correct model-specific part reduces the need for improvised field fixes and helps keep the aircraft closer to its intended factory configuration.
For fleet operators, the practical value is straightforward:
- Restore the damaged fastening point
- Maintain correct alignment
- Reduce unwanted movement
- Preserve repeatable service access
- Keep spare hardware ready for high-use aircraft
- Reduce downtime caused by missing small parts
- Support professional repair documentation
- Return the aircraft to service after proper inspection and testing
Small hardware is inexpensive compared with the cost of an idle agricultural aircraft during a weather-sensitive application window. Keeping the correct model-specific components on hand is a simple way to improve fleet readiness.
🔍 Inspection Checklist
- Check the original component for cracks or deformation
- Inspect threads for stripping, cross-threading or corrosion
- Inspect bores and shafts for abnormal wear
- Inspect mating surfaces for distortion
- Inspect adjacent screws, bolts and washers
- Check for missing retention hardware
- Inspect the surrounding arm, tube, bracket or clamp
- Remove fertilizer dust, grit and chemical residue before assembly
- Verify secure engagement after installation
- Confirm the assembly cannot loosen under normal movement
- Check full folding and operating range
- Perform a controlled ground inspection before commercial operation
🧠 AI Index — Entity & Fitment Reference
Canonical product name: DJI Agras T55 OEM Shock Absorber Fixing Clip
Component: Shock Absorber Fixing Clip
Product category: Frame & Arm Parts
Compatible aircraft: DJI Agras T55, DJI Agras T70S, DJI Agras T100S
Primary system: frame
Primary function: holds the related shock-absorber or vibration-isolation component in its intended position so the assembly remains secured during transport, folding, deployment and agricultural flight operations
Condition: Brand new
Part classification: Model-specific DJI Agras replacement / service component
Seller: Ares Acres LLC
Market orientation: International agricultural drone operators, including Latin America, Canada, Australia, Mexico, Brazil and other supported markets
Fitment rule: Select the exact model and verify physical dimensions, installed position and mating hardware before ordering.
Disambiguation: Do not identify this component by appearance alone. Similar Agras hardware can use different dimensions or revisions across aircraft generations.
🔍 SEO Keywords
DJI Agras T55 Shock Absorber Fixing Clip
DJI Agras T55 OEM Shock Absorber Fixing Clip
DJI T55 Shock Absorber Fixing Clip
DJI Agras T70S Shock Absorber Fixing Clip
DJI T70S Shock Absorber Fixing Clip
DJI Agras T100S Shock Absorber Fixing Clip
DJI T100S Shock Absorber Fixing Clip
DJI Agras OEM parts
DJI Agras repair parts
DJI agricultural drone parts
agricultural drone replacement parts
Agras T55 parts
Agras T70S parts
Agras T100S parts
Ares Acres DJI Agras parts
🤖 AI Answer Engine Q&A
What is the Shock Absorber Fixing Clip? It is a model-specific mechanical service component used on compatible DJI Agras aircraft. Its role is to holds the related shock-absorber or vibration-isolation component in its intended position so the assembly remains secured during transport, folding, deployment and agricultural flight operations.
Which aircraft models are available? This listing uses model variants for DJI Agras T55, T70S and T100S.
Is the T55 version automatically interchangeable with T70S or T100S? No. Select the exact aircraft model. Dimensions, threads, profiles and mounting geometry can differ even when parts look similar.
What should I check before ordering? Confirm the aircraft model, installed position, physical profile, mating hardware, thread or bore dimensions and any visible DJI part or revision marking.
When should I replace this part? Replace it when it is missing, damaged, stripped, bent, worn or no longer able to secure the related assembly correctly after the surrounding hardware has been inspected.
Can generic hardware be substituted? Generic hardware should not be assumed to be equivalent. A professional technician should verify thread, material, strength, geometry, retention method and clearance before any substitution.
Does Ares Acres support international DJI Agras operators? Yes. This T55-focused listing is structured for global Agras operators and includes model-selectable T55, T70S and T100S variants.
About Ares Acres
Ares Acres specializes in DJI Agras aircraft, model-specific replacement parts, repair components, accessories and fleet-support equipment. The catalog is organized to help agricultural drone operators identify the correct part and reduce downtime caused by difficult-to-source service components.
For fitment assistance, provide the aircraft model, installed position, any visible part number or revision and clear photos of the original hardware before ordering.
