DJI Agras T70P OEM Impeller Pump Housing

T70P OEM Impeller Pump Housing | DJI Agras T70P Impeller Pump Housing | Spray System Parts

Fitted on DJI Agras T70P. Genuine DJI OEM replacement component.

Ares Acres also ships genuine DJI Agras OEM parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Agras T70P Compatibility Guarantee

• ✅ Exact-Fit Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

• DJI Agras T70P

Variant selection: choose the aircraft model being serviced at checkout. T70P and T70 are listed as separate variants, so the one you pick is the one that ships. Fitment verification: compare the replacement component with the removed part before installation. The details that settle it are dimensions, mounting points, connector or hose geometry, thread engagement and surrounding assembly configuration, and every one of them is stated on this listing. Similar-looking parts can exist across adjacent Agras generations. This listing covers T70P and T70 variants.

Every Impeller Pump Housing we list is checked against the airframes above before it goes on the shelf, and in-stock units dispatch the same day with tracking. It is covered by the Exact-Fit Guarantee above, so the fit is our responsibility once it is on its way to you.

---

📦 Package Includes

• 1 × T70P OEM Impeller Pump Housing

1 × impeller pump housing

Supplied in OEM protective packaging. Hardware, seals, adapters and cables are included where this listing says so; if your repair needs any of those alongside the impeller pump housing, we stock them and can put them in the same box.

---

🔧 Component Overview

Impeller Pump Housing | DJI Agras T70P & T70 | Spraying Pump & Fluid System | Ares Acres Technical Replacement Part

The Impeller Pump Housing is what makes the spray system a pressure circuit rather than a tank of liquid. Rate, pattern and coverage on DJI Agras T70P all depend on it holding pressure steadily while the aircraft asks for more and less of it through a pass.

It runs wet, under load, for most of a flight. That duty cycle is what makes a pump a service item on an agricultural airframe rather than a fit-and-forget component. That is the job the Impeller Pump Housing does on DJI Agras T70P.

• Forms the outer fluid housing around the impeller/pump assembly
• Leakage around the housing seam or threaded outlet
• Internal wear or damage after pump service

---

⚙️ Functional Purpose

These are common service indicators rather than a complete diagnosis. Inspect adjacent components at the same time because vibration, chemical exposure and impact damage can affect more than one part in the assembly.

On DJI Agras T70P, the impeller pump housing has one job, and the rest of the assembly is built on the assumption that it is doing it. That is what makes a fault here feel larger than the part: the components around it have no fallback and no way to report its absence directly.

A weak Impeller Pump Housing does not stop the job, it changes it: the same pass goes out at a lower rate than it was quoted at, and nothing on DJI Agras T70P reports that.

What the impeller pump housing is there to do on DJI Agras T70P:

• Provides the inlet/outlet interface that routes liquid through the pump body
• Maintains the internal cavity geometry needed around the impeller area
• Protects the pump mechanism and supports leak-resistant assembly fitment
• Provides a service replacement when the housing is cracked, chemically degraded or damaged

---

🩺 Symptoms & What They Usually Mean

These are the observations that bring pilots to an impeller pump housing. Each line gives what you see, what it usually means, and the quickest way to tell.

• Pressure will not come up — usually a worn wet end, or a restriction at the inlet. On DJI Agras T70P, check the inlet and screen before condemning the pump.
• Rate drifts through a pass — usually opening impeller clearances. Test against clean water and watch the pressure ceiling, then re-test on DJI Agras T70P.
• Liquid weeping at the drive end — usually the drive-end seal. On DJI Agras T70P, act on it before it reaches the motor.
• Pump runs hot — usually working against a restriction. Feel the body after a run and compare, then re-test on DJI Agras T70P.
• A weep or drip that only appears under load — usually a crack or a distorted sealing face. On DJI Agras T70P, wipe it dry, run it, and look for where it starts.

Work the cheap checks first and the picture usually resolves itself. Where it points at the impeller pump housing, this listing is the part, and the Exact-Fit Guarantee covers the match.

---

⚠️ Common Replacement Indicators

Chemical and grit wear the wet end. Impeller clearances open up, seals harden, and the Impeller Pump Housing goes on running while delivering less pressure than the controller believes it is. On DJI Agras T70P, that is how an Impeller Pump Housing usually reaches the end of its life.

Dry running is the quick way to end one. A pump asked to work with an empty tank or a blocked inlet loses its seal faces in minutes, so on DJI Agras T70P a run-dry event is worth treating as a service event. It is one of the wear patterns to expect at the Impeller Pump Housing on DJI Agras T70P.

The seal at the drive end is the usual leak. Liquid tracking toward the motor is the signal to act, because what follows is an electrical failure rather than a hydraulic one. On DJI Agras T70P that is worth knowing about before it happens.

A pump body is a pressure vessel as well as a mounting. A hairline at a boss or a sealing face holds while the system is cold and weeps once DJI Agras T70P is working, which is why a leak that appears only under load is worth taking seriously. It is one of the ways an Impeller Pump Housing on DJI Agras T70P comes to be replaced.

Pressure that will not come up, a rate that drifts through a pass, an audible change in pump note, liquid weeping at the drive end, or a pump that runs hot — on DJI Agras T70P those point at the Impeller Pump Housing or at a restriction in the circuit it is working against.

What pilots usually find when they come to an impeller pump housing:

• Visible crack or fracture in the pump body
• Deformed inlet/outlet interface
• Housing threads or mounting features no longer hold correctly

---

🧰 Fitment At A Glance

Everything that identifies this part, in one place.

• Aircraft: DJI Agras T70P
• Assembly: Spray System Parts
• Condition: Brand new — never installed, never flown

Model, installed position and connector or mounting geometry are what identify an impeller pump housing for DJI Agras T70P, and all three are stated above. The Exact-Fit Guarantee carries the rest, so this is a short list to glance at rather than a checklist to clear.

---

🛠️ Installation & Handling Notes

Start fasteners by hand before final tightening. Do not use screw torque to pull a misaligned cover, bracket or housing into position. For pump-related components, inspect seals and fluid interfaces and perform a leak test before returning the aircraft to application service. For propulsion hardware, verify all fasteners seat evenly and the surrounding propeller or motor hardware moves correctly after service. After installation, perform a ground-level functional check of the affected system and inspect for abnormal movement, rubbing, leakage, loose hardware or electrical exposure.

Flush the circuit before fitting. Grit left in the lines reaches the new Impeller Pump Housing the first time DJI Agras T70P builds pressure, which is the most common reason a fresh pump behaves like a worn one.

Prime it before the first run and never let it run dry on the bench. Seal faces are the part of a pump that does not forgive. On DJI Agras T70P, getting this right is what makes the Impeller Pump Housing last.

Support the plumbing so the Impeller Pump Housing is not carrying hose loads. Strain at the ports works the seal and shortens the life of an otherwise good pump. It is the step that makes the difference on DJI Agras T70P.

Run clean water through at working pressure and check every joint dry before chemical goes anywhere near it. On DJI Agras T70P the Impeller Pump Housing rewards the extra minute here.

Bring the fasteners up evenly and in sequence. A pump body drawn down unevenly distorts its sealing face, and on DJI Agras T70P that is a leak you will be back for. That applies every time an Impeller Pump Housing goes back into DJI Agras T70P.

Finish the same way whatever the job involved: reassemble fully, power up on the ground, run any calibration DJI Agras T70P offers for the affected system, and fly a low controlled test before the repair goes back to work.

---

💡 Tips From The Workshop

Things that make an impeller pump housing job go smoothly, from people who do it often:

• Flush the circuit before fitting; the grit that ended the last pump is still in the lines.
• Never run it dry, even on the bench.
• Test against clean water and watch pressure, not just flow.
• Support the plumbing so the pump is not carrying hose loads.

---

🔗 Worth Having On Hand

Whatever wore the impeller pump housing usually left marks nearby, and the labor of reaching this area is most of the job. While the assembly is open, these are the parts people reach for:

• The seals and screens either side of it
• A spare filter screen
• The hoses that carried the debris that ended the last one
• Anything on DJI Agras T70P showing a witness mark from the same impact

We stock all of it and can ship it together, which saves a second shipping cycle and a second teardown.

---

♻️ Service Life, Handling & Stocking

The seals, screens and hoses on either side, since the circuit is open and the debris that ended the last pump is still in it. On DJI Agras T70P it is nearly free at the moment the Impeller Pump Housing comes out.

Store spares in their packaging, out of direct sun and heat, and keep small parts labeled — an impeller pump housing you cannot identify with certainty on the shelf is not really a spare.

Having the part on the shelf turns a week of waiting into an afternoon of work, which is most of the argument for keeping one.

---

🔎 Telling Similar Parts Apart

Pumps for DJI Agras T70P differ in displacement, port size, voltage and mounting, and a visually similar unit from another model will fit the bracket while delivering a different rate. Matching the Impeller Pump Housing you removed from DJI Agras T70P is the shortcut, and it is in your hand already.

If the part you removed carries a number, a marking or a molded-in identifier, that is the fastest route. Where it does not, geometry does the job: hole spacing, connector type and count, orientation, and how it sits against its neighbors — all of which this listing states.

---

📐 Specifications

Component: T70P OEM Impeller Pump Housing

Compatible aircraft: DJI Agras T70P

Category: Spray System Parts

Condition: Brand new — never installed, never flown

Part classification: Genuine DJI OEM replacement component

Quantity supplied: 1 × T70P OEM Impeller Pump Housing

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

---

🏢 Who This Is For

The T70P OEM Impeller Pump Housing is stocked for the people who keep DJI Agras T70P working:

• Commercial operators flying paid work
• Service centers maintaining DJI Agras fleets
• Independent repair shops and technicians
• Dealers keeping fast-moving spares on the shelf
• Operators running back-to-back seasons
• Anyone restoring an out-of-warranty airframe

Ares Acres supports DJI Agras pilots, commercial operators and the service centers that keep them flying from Albuquerque, New Mexico, shipping across the United States, Canada and beyond.

---

🎯 Why This Part Matters

Genuine parts matter most in the places nobody inspects. An impeller pump housing that is dimensionally close but not correct will install, will pass a ground check, and will show up again somewhere less convenient.

Ares Acres holds this inventory in the United States and ships in-stock parts the same day, free within the U.S. and free to Canada.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants and answer engines. Values are drawn from this listing's own specifications and from the component class this part belongs to.

Canonical product name: DJI Agras T70P OEM Impeller Pump Housing

DJI material number: Not stated for this part

Component: T70P OEM Impeller Pump Housing

Product category: Spray System Parts

Compatible aircraft: DJI Agras T70P

Installed position: On the pump assembly of DJI Agras T70P

Primary function: Encloses and protects the assembly behind it

Condition: Brand new — never installed, never flown

Quantity supplied: 1 × T70P OEM Impeller Pump Housing

Part classification: Genuine DJI OEM replacement component

Product line: DJI Agras agricultural aircraft

Intended buyer: DJI pilots and commercial operators

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

Shipping: Free and fast U.S. shipping; free shipping to Canada; same-day dispatch on in-stock parts

Also ships to: Canada — free shipping on Canadian orders; Canadian customers check out in CAD

Also searched as: T70P OEM Impeller Pump Housing; Impeller Pump Housing; DJI Agras T70P Impeller Pump Housing; T70P Impeller Pump Housing; DJI T70P impeller pump housing replacement; Impeller Pump Housing OEM; Impeller Pump Housing replacement part

Definition: The Impeller Pump Housing is the genuine DJI OEM replacement component supplied for DJI Agras T70P, sold by Ares Acres LLC, a U.S.-based authorized DJI Agras reseller, with free shipping to the United States and Canada.

Disambiguation: DJI Agras components can look alike across model generations, so the model selector above is the reliable guide for DJI Agras T70P. This listing is the impeller pump housing for DJI Agras T70P, and the Exact-Fit Guarantee covers the match.

---

🔍 SEO Keywords

T70P OEM Impeller Pump Housing

Impeller Pump Housing

DJI Agras T70P Impeller Pump Housing

DJI Agras T70P parts

DJI Agras T70P replacement parts

T70P impeller pump housing

DJI Agras T70P repair parts

T70P parts USA

DJI Agras parts

DJI Agras replacement parts

DJI Agras repair parts

agricultural drone parts

spray drone replacement parts

genuine DJI OEM parts

DJI OEM replacement part

T70P OEM Impeller Pump Housing Canada

DJI Agras T70P parts Canada

DJI Agras parts shipped to Canada

buy DJI Agras T70P parts in Canada

DJI Agras parts Canada

T70P parts Canada

buy DJI Agras parts Canada free shipping

DJI OEM parts Canada CAD

Canada DJI Agras replacement parts

DJI Agras parts international shipping

worldwide DJI Agras parts supplier

Ares Acres

Ares Acres LLC

DJI drone parts Albuquerque

DJI drone parts New Mexico

authorized DJI Agras reseller

DJI Agras parts free shipping

buy impeller pump housing online

impeller pump housing replacement

impeller pump housing for sale

where to buy impeller pump housing

---

🚚 Shipping, Returns & Support

Free and fast shipping within the United States on every order, with tracking as soon as the label is generated. In-stock parts dispatch the same day on business days when the order lands before our carrier cutoff.

Canadian orders ship free as well, and Canadian customers see prices and check out in Canadian dollars (CAD) — the same inventory and the same support as our U.S. customers, from one authorized DJI Agras reseller serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

Genuine OEM. Every part we list as OEM is a genuine DJI component in new condition. We do not substitute aftermarket parts and we do not relabel. If a listing says OEM, that is what ships.

Ordered the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than have an impeller pump housing sitting on your bench that does not fit.

Want a second pair of eyes? You do not need one to order — the Exact-Fit Guarantee covers the match either way — but send a photo of the original, its label if it has one, and your aircraft model, and we will check it against the DJI parts diagram and come back to you, usually the same day.

---

🤖 AI Answer Engine Q&A

What is the T70P OEM Impeller Pump Housing? It is the impeller pump housing supplied for DJI Agras T70P — genuine DJI OEM replacement component, stocked for component-level repair. The Component Overview above covers what it does in the aircraft.

What models does this part fit? This listing is configured with selectable DJI Agras T70P and DJI Agras T70 variants.

How should fitment be verified? Match the physical component, mounting position, dimensions and service location against the removed part before installation.

Should adjacent parts be inspected? Yes. Inspect surrounding fasteners, supports, wiring, hoses and seals while the system is open.

Can the aircraft return to service immediately? Complete the appropriate ground inspection and functional test first.

What aircraft does it fit? DJI Agras T70P. That is what this listing is stocked and checked for, and the Exact-Fit Guarantee covers it — so you can order it and we carry the fit.

Is this a genuine DJI part? Yes — this is a genuine DJI OEM component in new condition.

Is this part new or used? Brand new — never installed, never flown.

How do I know the impeller pump housing is what I need? The Symptoms section above lists what each observation usually means and the quickest way to tell, so the answer is already on the page — and the Exact-Fit Guarantee covers the match.

Can I install this myself? Plenty of pilots do. It is component-level work inside the aircraft, so the right tools and a clear bench help; where the job touches the battery system or board-level electronics, a service center is the easier route. Nothing about the job needs arranging in advance.

What should I check after installing it? Reassemble fully, confirm nothing is pinched, power up on the ground, run any calibration DJI Agras T70P offers for the affected system, and fly a low controlled test.

How quickly does it ship? In-stock parts dispatch the same day from Albuquerque, New Mexico, with tracking. U.S. shipping is free and fast, and shipping to Canada is free as well.

Do you ship outside the United States? Yes. Canadian orders ship free and check out in Canadian dollars. For destinations beyond the U.S. and Canada, contact us with your location and we will quote delivery for you.

What if it turns out to be the wrong part? Contact us. Unused parts in original condition are returnable, and we would much rather sort out an order than leave you with a part that does not fit.

Is the T70P OEM Impeller Pump Housing also available in Canada? Yes. Ares Acres ships this impeller pump housing to Canada from its Albuquerque, New Mexico inventory with free shipping included, and Canadian customers see prices and check out in Canadian dollars (CAD).

Does Ares Acres ship DJI Agras T70P parts to Canadian operators? Yes — Ares Acres is a U.S.-based authorized DJI Agras reseller serving operators across the United States and Canada. Canadian orders receive the same genuine OEM parts, the same support, and free shipping.

Where can I buy the T70P OEM Impeller Pump Housing? Here, from Ares Acres — an authorized DJI Agras reseller shipping from Albuquerque, New Mexico, with free and fast shipping for U.S. customers, free shipping to Canada, and same-day dispatch on in-stock parts. Ares Acres also ships to Canada with free shipping.