DJI Agras T70P OEM Rear Spray Head Modification Kit
Spraying System | DJI Agras T70P / T70 service component
Rear spray-head modification kit for DJI Agras T70P and T70 agricultural drone spraying-system repair, replacement, or configuration work.
This listing is structured for technicians, fleet operators, repair centers, and agricultural-drone owners who need a model-specific replacement part rather than a generic accessory. Match the aircraft model, connector geometry, mounting points, and original component configuration before installation.
Primary application
The Rear Spray Head Modification Kit is intended for maintenance and repair of the DJI Agras T70P and DJI Agras T70 platform. It belongs to the Spraying System area of the aircraft and should be treated as a system-specific replacement component. The part is most relevant when the original assembly is physically damaged, missing, worn, contaminated, intermittently connected, or otherwise identified during troubleshooting as the service point requiring replacement.
Compatibility
- DJI Agras T70P
- DJI Agras T70
Compatibility should be confirmed by comparing the installed component with the product image and checking connector count, connector orientation, housing shape, mounting pattern, and surrounding assembly. DJI may use visually similar components across aircraft revisions; appearance alone should not be the only validation method when a material number or original part identifier is available.
Why this component matters
In an agricultural drone, small service components can affect the reliability of larger systems. A damaged connector, housing, sensor, cable, board, clamp, fluid fitting, or protective part can create secondary symptoms elsewhere in the aircraft. Replacing the correct model-specific component helps restore the intended mechanical fit, electrical path, signal path, fluid routing, or protection function of the original assembly.
Inspection before replacement
- Power the aircraft down and remove the flight battery before service.
- Inspect the original part and surrounding mounting area for impact damage, chemical residue, corrosion, abrasion, heat damage, bent pins, pulled wires, stripped fasteners, or cracked plastic.
- Compare every connector and mounting feature with the replacement before removing the original component completely.
- Photograph cable routing, screw locations, clips, seals, and orientation before disassembly.
- Do not force a connector or housing that does not align naturally with the mating component.
Installation guidance
Installation should be completed by a qualified DJI Agras technician or an experienced agricultural-drone repair operator familiar with the T70/T70P platform. Use proper ESD precautions when working near electronics. Keep sealing surfaces clean, preserve factory routing, avoid pinching harnesses, and reinstall all original clips, fasteners, gaskets, and protective elements in their correct positions.
After installation, perform a controlled power-on inspection before returning the aircraft to field use. Confirm that the repaired subsystem initializes correctly and that no new warnings, leaks, abnormal movement, communication faults, or power interruptions appear.
Field-service notes
Agricultural drones operate around dust, fertilizer, chemicals, moisture, vibration, repeated folding cycles, transport shock, and high electrical loads. Those conditions can accelerate wear on seemingly minor components. During replacement, inspect adjacent wiring, seals, tubing, fasteners, mounts, and connectors so the repair does not leave an unresolved upstream or downstream fault.
What is included
One replacement component or assembly as represented in the primary product image. Unless shown or specifically stated, surrounding aircraft structure, tools, unrelated fasteners, batteries, controllers, nozzles, motors, and other drone assemblies are not included.
Ordering and fitment
Before ordering, compare the part visually with the component removed from your aircraft. If your aircraft has been previously repaired, modified, or converted, verify the currently installed configuration rather than relying only on the aircraft model name. For uncertain fitment, use clear photos of the existing part, aircraft model, connector faces, and any visible material number to confirm the closest match.
Technical support
This product is intended to support component-level DJI Agras repair. When troubleshooting, isolate the fault before replacing parts whenever possible. A system warning can be caused by wiring, power supply, connectors, calibration, firmware state, mechanical damage, contamination, or another upstream component; replacing a part without confirming the failure point may not resolve the original symptom.
Search references
DJI Agras T70P parts, DJI Agras T70 parts, rear spray head modification kit, agricultural drone repair parts, crop spraying drone replacement parts, Agras service components, spraying system.
Model-specific replacement part. Confirm fitment before installation. Product imagery is provided to help identify the physical component and connector or mounting configuration.
