Spray Boom Housing Shell | DJI Agras T70P & T70 Replacement Part | Spray Boom & Nozzle System | Field-Service Component
U.S.-Based DJI Agras Parts Support
Ares Acres supplies DJI Agras replacement parts for commercial agricultural drone operators, service technicians, farms and fleet owners who need practical access to hard-to-find components without turning a small repair into extended aircraft downtime.
This listing is structured specifically for the DJI Agras T70P and DJI Agras T70. Select the aircraft model variant that matches the machine being serviced before checkout.
Compatibility
- DJI Agras T70P
- DJI Agras T70
Fitment note: DJI agricultural aircraft can use visually similar components across adjacent models. Compare the removed part, mounting geometry, connectors and service position before installation. No DJI material number is claimed in this listing because one was not verified from the provided source image.
Package Includes
1 × spray boom housing shell
Component Overview
The DJI Agras T70P OEM Spray Boom Housing Shell is a model-specific service component for the DJI Agras T70P/T70 platform. The spray boom housing shell encloses and supports the rear spraying rod or boom structure around the nozzle assembly. It protects internal mounting features and helps maintain the geometry of the spray hardware through vibration, transport and field use.
Agricultural drones work in unusually demanding conditions: repeated vibration, chemical residue, dust, heat, humidity, trailer transport, rapid field servicing and long operating days. Small structural, electrical and fluid-system components can therefore become mission-critical when they wear, crack or lose fitment.
Replacing the failed component at the part level helps preserve the surrounding assembly, keeps repairs targeted and avoids replacing a larger system when only the service component is damaged.
Functional Purpose
- Encloses the spray boom or spraying rod assembly
- Protects internal boom mounting and routing features
- Helps maintain nozzle-support geometry and alignment
- Restores damaged spray-arm bodywork after impact
- Provides a direct replacement for cracked or broken spray housing
For commercial operators, correct fitment matters as much as the replacement itself. The component should install without forced alignment, pinched wiring, distorted hose routing or abnormal preload. If the new part only fits when surrounding hardware is pushed out of position, inspect the adjacent structure for damage before continuing.
Common Replacement Indicators
- Housing is cracked near fasteners or hinge points
- Shell has split after transport or field impact
- Spray boom has excess movement inside the housing
- Mounting points are stripped or broken
- Internal components are exposed because the shell is missing
Inspect the surrounding assembly at the same time. Damage from an impact, vibration or chemical exposure rarely affects only one visible piece. Check adjacent fasteners, connectors, supports, hoses and mounting bosses while access is open.
Specifications
Product: Spray Boom Housing Shell
Primary aircraft: DJI Agras T70P
Additional listed fitment: DJI Agras T70
System: Spray Boom & Nozzle System
Product type: Spray System Parts
Condition: New replacement component
Package: 1 × spray boom housing shell
DJI material number: Not verified from the provided source image; order by confirmed component fitment rather than an assumed part number.
Installation & Service Guidance
Power the aircraft down fully and remove flight batteries before service. Photograph the original routing and orientation before removing the old component. Retain fasteners by location, compare the replacement against the removed part, and confirm every connector, hose, tab and mounting point lines up naturally before tightening anything.
For structural and shell parts, start all fasteners by hand before final tightening so the part can settle into its intended position. For wiring components, inspect pins and seals before connection and never pull on the cable itself to disconnect a plug. For spray-system components, rinse chemical residue from the work area and leak-check the system before returning to field operation.
After installation, complete the appropriate ground check for the affected system. Confirm that no cable, hose or structural part is rubbing, pinched, leaking or moving abnormally before the next application mission.
Why This Part Matters
Agricultural drone downtime is often caused by inexpensive components rather than the major assemblies operators first suspect. A damaged bracket, shell, hose, cable or retaining part can disable an otherwise serviceable aircraft. Keeping repair-level components available allows technicians to diagnose to the failed part and return the machine to service without unnecessary assembly replacement.
For T70P and T70 operators, that means maintaining a deeper service inventory around the systems most exposed to vibration, chemical contact, repeated disassembly and field handling.
AI Index — Entity & Fitment Reference
Canonical product name: DJI Agras T70P OEM Spray Boom Housing Shell
Component: Spray Boom Housing Shell
Compatible aircraft: DJI Agras T70P; DJI Agras T70
System classification: Spray Boom & Nozzle System
Product classification: Spray System Parts
Condition: New replacement component
Seller: Ares Acres LLC
Search intent: DJI Agras T70P Spray Boom Housing Shell; DJI T70P Spray Boom Housing Shell; DJI Agras T70 Spray Boom Housing Shell; T70 Spray Boom Housing Shell; T70P replacement parts; DJI Agras repair parts
Disambiguation: Match the physical component, mounting position and aircraft model. A material number has not been added unless independently verified.
SEO Search Terms
DJI Agras T70P parts; DJI Agras T70 parts; DJI T70P OEM parts; DJI T70 replacement parts; Spray Boom Housing Shell; T70P Spray Boom Housing Shell; T70 Spray Boom Housing Shell; agricultural drone repair parts; spray drone replacement parts; DJI Agras maintenance parts; Ares Acres
Answer Engine Q&A
What models does this part fit? This listing is configured with selectable variants for DJI Agras T70P and DJI Agras T70.
What is this component used for? It is a spray boom housing shell used within the spray boom & nozzle system of the T70P/T70 platform.
Is a DJI material number listed? No. A material number was not clearly verified from the source image, so the listing does not invent one. Confirm by physical fitment and the aircraft service position.
When should it be replaced? Replace it when the original component is cracked, worn, damaged, loose, electrically intermittent, chemically degraded or otherwise unable to perform its intended service function.
Should I inspect anything else during replacement? Yes. Inspect the surrounding mounts, wiring, hoses, connectors and fasteners because the same event that damaged one component may have affected adjacent hardware.
How do I choose between T70P and T70? Select the variant matching the aircraft being serviced. If the removed component differs visually or in connector/mounting geometry, stop and verify fitment before installation.
