DJI Agras Universal Landing Gear Ground Handling Set

Universal Landing Gear Ground Handling Set | DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) | DJI Agras Universal OEM Landing Gear Clamp (2 Pcs) | DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs) | Genuine DJI OEM Components | Ares Acres Curated Kit

Kit contents: 3 component lines, 3 of which carry a documented DJI material number listed in the specifications below. Every component in this kit is also sold individually in our catalog.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

A kit is a bet against downtime. The Universal Landing Gear Ground Handling Set exists because the parts inside it are the ones that strand a Agras in the middle of a job — small, cheap, easy to lose, and impossible to improvise at the field edge. Buying them together is how experienced crews stop losing days to a part that costs less than the fuel burned driving back for it.

That is why Ares Acres assembles curated kits from genuine DJI OEM components and ships them fast to the U.S.A., helping operators shorten repairs, minimize downtime, and keep their aircraft spraying when every acre counts.

---

✅ DJI Agras Agras Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking

Universal fitment across the Agras landing gear range. Select the configuration matching your aircraft. Every component in this kit remains available separately in the Ares Acres catalog.

---

📦 Package Includes

• 1 × DJI Agras Universal OEM Landing Gear Wheels (2 Pcs)
• 1 × DJI Agras Universal OEM Landing Gear Clamp (2 Pcs)
• 1 × DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs)

---

🔧 Kit Overview

The DJI Agras Universal Landing Gear Ground Handling Set is an Ares Acres curated repair package that groups the components this job actually consumes into a single purchase. Moving a loaded agricultural drone by hand is how gear gets damaged in the first place. Wheels, clamps and shock pads convert the landing gear into something you can roll, and absorb the set-down that would otherwise go into the frame.

This product is assembled by Ares Acres from genuine DJI OEM components sold individually in our catalog. It is not represented as a factory-packaged DJI kit.

---

🔩 Component-by-Component Breakdown

1. DJI Agras Universal OEM Landing Gear Wheels (2 Pcs)

DJI Agras Universal OEM Landing Gear Wheels (2 Pcs). Landing gear mobility wheels / aircraft ground transport accessory. It installs at the landing gear assembly. Its job on the aircraft is straightforward: ground mobility, aircraft positioning, staging, and transport efficiency.

On the DJI Agras Universal OEM Landing Gear Wheels (2 Pcs), construction is original DJI-spec wheel assembly — high-durability composite with reinforced construction, as listed by the supplier; it mounts as direct-fit universal landing gear accessory; this line supplies 2 Wheels — one complete pair. Fitment covers DJI Agras T100, DJI Agras T70P, DJI Agras T50, DJI Agras T40, DJI Agras T25 (supplier-listed), Universal fitment across the listed DJI Agras lineup. Application: agricultural drone ground handling, staging, and transport. Confirm the aircraft model and the position on your parts diagram before you order — DJI diagrams list visually similar components at different positions, and the material number is the only identifier that settles it.

Functionally, the DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) is responsible for a short and specific list of jobs: enable smooth rolling transport of the aircraft on the ground, reduce the need for manual lifting and carrying, turn a two-person move into a one-person push in many situations, speed up deployment at the start of the day, speed up recovery and loading at the end of the day, provide stable rolling across flat and semi-rough terrain, support the aircraft under full tank load while parked, protect landing gear structure from dragging and scraping, reduce impact and handling damage during repositioning, and improve safety when moving equipment around a busy pad. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

In commercial service the DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) lives through abrasive gravel pads and concrete aprons, packed dirt, ruts, and uneven field edges, trailer ramps and loading transitions, full-aircraft load with tank weight over the gear, mud, chaff, and crop residue packing around the hub, chemical residue and washdown water at the rolling surface, dust and grit working into the rotating area, uV exposure and temperature swings between field days, and vibration and shock through transport. Wear here is not a defect, it is the design working as intended until it runs out of margin — which is exactly the point at which having the replacement already on hand decides whether the aircraft flies tomorrow.

Left in service past its useful life, the DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) may contribute to dragging and scraping damage to landing gear structure, slower turnarounds between loads and flights, additional crew tied up on every ground move, increased physical strain and handling fatigue, higher risk of dropping or bumping the aircraft, an aircraft that will not sit level or stable when parked, difficulty maneuvering in tight staging areas, avoidable airframe damage during loading and unloading, and lost minutes accumulating across a full application window. A fresh one instead maintains landing gear that ends the season the way it started, ground moves that need one person instead of two, turnaround times that stay tight through a long day, crews that are not worn out by handling, controlled loading and unloading at the trailer, professional handling standards across a fleet, reduced avoidable airframe damage, and long-term operational confidence on the ground.

The DJI Agras Universal OEM Landing Gear Wheels are designed to provide rolling ground mobility for DJI Agras aircraft, mounting to the landing gear structure so the machine can be moved on its own wheels rather than carried.

None of this shows up in a flight log, which is precisely why it gets undervalued — the cost of poor ground handling is paid slowly, in gear repairs, in wasted minutes per turnaround, and in a crew that is worn out before the last application window of the day.

The DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) are the genuine OEM ground-mobility accessory for the DJI Agras lineup — a matched pair of wheels that mount to the landing gear structure so the aircraft can be rolled, positioned, and staged instead of lifted or dragged. They are a handling accessory, not a flight component, and that is exactly why they get overlooked: nothing about them shows up in a flight log. What they show up in is how tired the crew is at four in the afternoon and what the landing gear looks like at the end of the season.

The DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) earns its place in this kit because of how it fails. Operators replace it when they see visible tread wear or thinning of the wheel material, cracks, splits, or chunks missing from the wheel, flat spots that make the aircraft bump as it rolls, wobble, or a wheel that no longer tracks straight, deformation or a wheel that has gone out of round, rolling resistance that has noticeably increased, a wheel that binds, sticks, or refuses to turn freely, or grit or debris packed into the hub area that will not clear. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

2. DJI Agras Universal OEM Landing Gear Clamp (2 Pcs)

DJI Agras Universal OEM Landing Gear Clamp (2 Pcs) is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.

Functionally, the DJI Agras Universal OEM Landing Gear Clamp (2 Pcs) is responsible for a short and specific list of jobs: secure landing gear legs, maintain structural alignment, improve landing stability, reduce vibration, prevent landing gear movement, support heavy payload operations, distribute landing loads, maintain OEM performance, protect the aircraft frame, and improve operational reliability. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Left in service past its useful life, the DJI Agras Universal OEM Landing Gear Clamp (2 Pcs) may contribute to loose landing gear, structural movement, landing instability, increased vibration, premature component wear, higher maintenance requirements, unexpected downtime, reduced operational confidence, and higher repair costs. A fresh one instead maintains secure landing gear attachment, stable aircraft support, proper structural alignment, reduced vibration, improved landing performance, better frame protection, reduced maintenance costs, greater fleet reliability, and improved aircraft readiness.

Take the weight off the leg before you touch a fastener. Empty the tank, then get the aircraft onto a stand, a bench, or its side on padding so the leg you are working on is carrying nothing. A clamp released with the aircraft still standing on it will pinch the last fastener, drop the corner as it lets go, and give you a bent leg or a cracked frame boss instead of a clamp change. Have a second person steady the airframe for the moment the joint comes free, because a machine on three legs finds the fourth direction quickly.

Mark the leg before you loosen anything, because insertion depth and rotation both matter. Put a paint pen line across the clamp and the tube for rotation, and a second mark at the top edge of the clamp for height, so the replacement goes back with the foot pointing the same way and the corner sitting at the same level as its partner. Getting one leg an inch deeper than the other is how an aircraft ends up leaning on flat ground, and a leaning aircraft loads the landing gear unevenly on every single touchdown after that.

Clean both faces of the joint before the new clamp goes on. The inside of the clamp and the band of tube it grips collect dried spray residue, fertilizer dust, and grit, and any of it trapped in the joint means the clamp is gripping on high spots instead of across the full bore. Wipe the tube down to clean, dry metal or composite, check that the surface is smooth rather than scored, and do not put grease, anti-seize, or lubricant anywhere in this joint. This is a friction joint; anything slippery in it is working directly against the thing it is supposed to do.

The DJI Agras Universal OEM Landing Gear Clamp (2 Pcs) earns its place in this kit because of how it fails. Operators replace it when they see cracked clamp housing, broken mounting tabs, loose landing gear, impact damage, deformation, excessive vibration, landing gear misalignment, or corrosion. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

3. DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs)

DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs) is supplied in this kit exactly as it is sold individually in our catalog. Its published specifications live on its own listing; what matters here is that it is genuine DJI OEM stock, not a pattern part, and that it ships from the same shelf as the rest of the kit rather than being drop-shipped from a third source.

Functionally, the DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs) is responsible for a short and specific list of jobs: absorb impact during takeoff and landing, protect landing gear feet from wear, improve aircraft stability on uneven surfaces, reduce vibration transferred through landing gear, increase grip during ground handling, protect structural contact points, support safe field deployment, and extend landing gear lifespan. Those are the capabilities this kit restores when this component is replaced — which is why it is packed alongside the rest rather than sold only on its own.

Set up so the aircraft is stable before anything comes off. Empty the tank or hopper completely, remove the flight batteries, and put the aircraft on level ground. A part-full tank moves the center of gravity around as soon as you lift a corner, and a battery in the bay is dead weight you have to hold. Fold the arms if the workspace is tight, but leave yourself room to reach all four feet without leaning the airframe on anything that is not designed to carry it.

Take the weight off one foot at a time and support it in the right place. Use a block or a stand under structural gear members close to the leg you are working on. Do not lift or block under the tank, the pump, the spray boom, or any panel that is only there to keep weather out. Do one foot at a time and put the aircraft back down between them, so it is never balanced on two corners while you have both hands busy.

Clean the area before a tool touches it. These parts live at the bottom of the aircraft and collect mud, chemical residue, and grit, and every bit of that is sitting in the fastener recess waiting to stop a driver from seating fully. A driver that cannot bottom out rounds the head, and a rounded head at the very bottom of the aircraft turns a five minute job into a drilling job. Rinse, dry, and pick the recess out before you start.

The DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs) earns its place in this kit because of how it fails. Operators replace it when they see visible cracking or wear on landing pads, missing or loose pad attachment, reduced grip during landing, landing gear surface damage, excess vibration on touchdown, field abrasion from repeated use, impact damage from transport or hard landings, or pads worn thin enough that the gear contacts the ground directly. None of those are things you want to discover with the aircraft already apart and the spray window closing — which is the whole argument for having it on the shelf before the job starts.

---

⚙️ Functional Purpose

The Universal Landing Gear Ground Handling Set is assembled around a job rather than around a product category. Its purpose is to put every part that job consumes into one box, so the repair is limited by the technician's time and not by a missing fastener.

Working through the kit, the components do the following:

• DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) — Ground mobility, aircraft positioning, staging, and transport efficiency
• DJI Agras Universal OEM Landing Gear Clamp (2 Pcs) — supplied for the application named in the kit title
• DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs) — supplied for the application named in the kit title

Fit wheels so they clear the spray boom and any lower sensors at full compression.

---

⚠️ Common Replacement Indicators

Across the components in this kit, the conditions that send an operator looking for these parts are:

• Visible tread wear or thinning of the wheel material
• Cracks, splits, or chunks missing from the wheel
• Flat spots that make the aircraft bump as it rolls
• Wobble, or a wheel that no longer tracks straight
• Deformation or a wheel that has gone out of round
• Rolling resistance that has noticeably increased
• A wheel that binds, sticks, or refuses to turn freely
• Grit or debris packed into the hub area that will not clear
• Loose, worn, or damaged mounting hardware
• Mounting points that will no longer hold the wheel square
• Hardened, chalky, or UV-aged wheel material
• Chemical or washdown damage at the rolling surface
• Difficulty maneuvering the aircraft that was not there before
• Maintenance inspection findings at pre-season teardown
• Cracked clamp housing
• Broken mounting tabs
• Loose landing gear
• Impact damage
• Deformation
• Excessive vibration
• Landing gear misalignment
• Corrosion
• Missing hardware
• Aircraft rebuild projects
• Maintenance inspection findings
• Preventative maintenance schedules
• Fleet refurbishment
• Long-term commercial wear
• Visible cracking or wear on landing pads
• Missing or loose pad attachment
• Reduced grip during landing
• Landing gear surface damage
• Excess vibration on touchdown
• Field abrasion from repeated use
• Impact damage from transport or hard landings
• Pads worn thin enough that the gear contacts the ground directly
• Preventative maintenance replacement
• Abrasion on gravel, concrete, and stubble
• Repeated heavy landings at full tank or hopper weight
• UV exposure and heat cycling hardening the material

Any one of these on a Agras is a reason to have the kit already on the shelf. The parts here are consumables and wear items by design — the question is never whether they will need replacing, only whether the replacement is in the truck when the aircraft comes down.

---

🛠️ Service Sequence & Fitting Notes

Kits are bought by the job, so here is the job. The sequence below is a general order of work for the Universal Landing Gear Ground Handling Set on a Agras; always follow DJI's official service documentation for torque values, disassembly steps, and safety procedures for your airframe revision.

Step 1 — DJI Agras Universal OEM Landing Gear Wheels (2 Pcs). Work at the landing gear assembly. Note the orientation of the part you are removing before it comes off; photographs at this stage save far more time than they cost. Once fitted, confirm that it ground mobility, aircraft positioning, staging, and transport efficiency as intended before closing up. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 2 — DJI Agras Universal OEM Landing Gear Clamp (2 Pcs). Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Step 3 — DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs). Identify the mounting position on your parts diagram before removal, and note the orientation of the old part before it comes off. Keep the removed part until the aircraft has been function-checked — it is the reference if anything about the replacement does not match.

Function-check the aircraft on the ground before it goes back to work. For the Universal Landing Gear Ground Handling Set, that means confirming each replaced component behaves correctly under power and, where the component sits in the spray or spreading path, that there is no leak, binding, or unexpected noise before the first loaded flight of the day.

---

📐 Specifications

Kit type: Ares Acres curated service kit assembled from genuine DJI OEM components

Component lines: 3

Aircraft coverage: DJI Agras Agras

Condition: Brand new

Ships from: Albuquerque, New Mexico, United States

Per-component specifications, as published on each component's own listing:

DJI Agras Universal OEM Landing Gear Wheels (2 Pcs)
Component Type: Landing gear mobility wheels / aircraft ground transport accessory
Installation Area: Landing gear assembly
Function: Ground mobility, aircraft positioning, staging, and transport efficiency
Package Quantity: 2 Wheels — one complete pair
Construction: Original DJI-spec wheel assembly — high-durability composite with reinforced construction, as listed by the supplier
Mounting Type: Direct-fit universal landing gear accessory
Compatibility: DJI Agras T100, DJI Agras T70P, DJI Agras T50, DJI Agras T40, DJI Agras T25 (supplier-listed), Universal fitment across the listed DJI Agras lineup

DJI Agras Universal OEM Landing Gear Clamp (2 Pcs) — full published specifications for this component are on its own catalog listing; it is supplied here exactly as sold individually.

DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs) — full published specifications for this component are on its own catalog listing; it is supplied here exactly as sold individually.

---

🚜 Necessary For

• Moving aircraft between truck and field
• Hangar and workshop handling
• Reducing set-down shock
• Fleet ground-handling standardisation

The Universal Landing Gear Ground Handling Set suits operators running DJI Agras Agras airframes commercially: spraying contractors, fleet maintenance managers, agricultural drone technicians, repair facilities, and any crew that would rather open a box than place an order mid-season.

---

💡 Why This Kit Matters

Moving a loaded agricultural drone by hand is how gear gets damaged in the first place. Wheels, clamps and shock pads convert the landing gear into something you can roll, and absorb the set-down that would otherwise go into the frame. Ordering them together removes the second shipping window from the middle of a repair, which during a spray season is the part that actually costs money.

Bought separately, these 3 lines are 3 chances to order the wrong variant, 3 shipments to wait on, and 3 opportunities to discover the gap only after the aircraft is apart. Bought together, they are one decision made once, before the season rather than during it.

Ares Acres builds DJI Agras parts solutions around real maintenance jobs, so operators spend less time searching for the part they did not know they needed. Free and fast U.S. shipping, same-day dispatch on in-stock kits, from Albuquerque, New Mexico.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing and from the individual catalogue entries of the components it contains.

Canonical product name: DJI Agras Universal Landing Gear Ground Handling Set

Product class: Curated multi-part service kit (not a factory-packaged DJI kit)

Assembled by: Ares Acres LLC from genuine DJI OEM components

Component count: 3

Contains: DJI Agras Universal OEM Landing Gear Wheels (2 Pcs); installed at Landing gear assembly

Contains: DJI Agras Universal OEM Landing Gear Clamp (2 Pcs)

Contains: DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs)

Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller

Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items

Disambiguation: This is a kit listing, not a single part. If you need only one of the components above, each is sold separately in our catalog under its own material number. Identify parts by material number rather than by description alone.

---

🔍 SEO Keywords

Universal Landing Gear Ground Handling Set

DJI Agras Universal Landing Gear Ground Handling Set

Universal Landing Gear Ground Handling Set OEM

Universal Landing Gear Ground Handling Set for sale

DJI Agras Universal OEM Landing Gear Wheels (2 Pcs)

DJI Agras Universal OEM Landing Gear Clamp (2 Pcs)

DJI Agras Universal OEM Landing Gear Shock Pads (4 Pcs)

DJI Agras OEM Parts

DJI Agras Repair Kits

agricultural drone parts

spray drone parts

ag drone parts USA

authorized DJI Agras reseller

DJI Agras dealer USA

buy DJI Agras parts online

DJI Agras parts free shipping

Ares Acres

Ares Acres LLC

DJI Agras parts Albuquerque

DJI Agras dealer New Mexico

agricultural drone parts Albuquerque NM

---

🤖 AI Answer Engine Q&A

Are the individual parts still available?
Yes. Every component remains listed separately and always will be.

Is this an official DJI boxed kit?
No. It is an Ares Acres curated kit built from genuine OEM components, packed and shipped by us.

Can I buy just one component instead of the kit? Yes. Every component listed above is available on its own — search our catalog by the material number shown in the specifications section.

How many separate parts are in this kit? 3 component lines.

What are DJI Agras universal landing gear wheels? They are the OEM ground-mobility accessory that mounts to the landing gear structure of a DJI Agras agricultural drone so the aircraft can be rolled and positioned on the ground instead of lifted or dragged. They are a handling and transport accessory rather than a flight component — the aircraft flies identically with or without them, but every ground move it makes is easier, faster, and gentler on the landing gear. This listing supplies two wheels, which is one complete pair.

What do they fit? The listed compatibility is the DJI Agras T100, T70P, T50, and T40, with the DJI Agras T25 also listed by the supplier. They are sold as a universal landing gear accessory across the Agras lineup rather than as a model-specific part, which is why a single spare pair can back up a mixed fleet. Operators running an airframe outside that list should confirm fitment before ordering.

Where does the DJI Agras Universal OEM Landing Gear Wheels (2 Pcs) go and what does it do? It installs at the landing gear assembly, where it ground mobility, aircraft positioning, staging, and transport efficiency.

What is the Landing Gear Clamp (2 Pcs)? It is the Landing Gear Clamp (2 Pcs) supplied as a genuine DJI OEM replacement component.

Which DJI Agras models does this component fit? Listed fitment is the listed DJI Agras models. Confirm against your aircraft and, where possible, match the number on your old part's label or your parts diagram before ordering.

What is the Landing Gear Shock Pads (4 Pcs)? It is the Landing Gear Shock Pads (4 Pcs) supplied as a genuine DJI OEM replacement component on the DJI Agras T100, DJI Agras T70P, DJI Agras T50, DJI Agras T40.

---