Weighing Rubber Head Set | Tank Load Sensor Contact Pads | Weight Transfer Cushions | Payload Measurement Component | Field-Ready Replacement Part
🇺🇸 U.S.A. FIRST
Ares Acres LLC is a U.S.-based authorized DJI Agras reseller supporting American agricultural drone operators with genuine DJI Agras OEM replacement parts, accessories, and field-ready inventory.
FREE & FAST Shipping is included for all U.S. customers.
We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.
The aircraft decides how much it is carrying by what the weighing system tells it. Hardened or missing rubber heads throw that reading off, and everything downstream inherits the error — remaining-volume estimates, flow calibration, and the low-tank return trigger.
We ship the Weighing Rubber Head Set fast to the U.S.A.
✅ DJI Agras T50 / T25 Compatibility Guarantee
- 🇺🇸 USA Compatibility Guarantee
- 👍🏻 Satisfaction Guarantee
- 💵 Money Back Guarantee
- 📦 Same Day Shipping & Tracking
📦 Package Includes
- Weighing rubber head set (as pictured)
- DJI part reference 001011.04
- Protective packaging
🔧 Component Overview
The Weighing Rubber Heads are the moulded contact pads that transfer spray tank load into the aircraft's weighing sensors. They sit between tank and sensor, carrying the full payload while providing the compliant, repeatable contact the load cells need to read accurately.
The set supports:
- Accurate tank payload measurement
- Even load transfer into the sensors
- Repeatable readings tank to tank
- Vibration damping at the sensor interface
- Correct remaining-volume estimation
- Restored factory weighing accuracy
- Direct-fit replacement
- Increased aircraft readiness
Commercial agricultural drones work hard every day, including through:
- Crop spraying missions
- Full-tank payload cycles
- High-tempo fill-and-fly rotations
- Spreading and granular operations
- Daily commercial deployments
- Fleet operations
- High-acreage contract work
- Back-to-back tank turnarounds
Throughout these operations, this is routinely exposed to:
- Full payload compression on every fill
- Chemical overspray and residue
- UV degradation and hardening
- Vibration from the propulsion system
- Heat cycling through the working day
- Wash-down and rinsing cycles
- Seasonal intensive operation
- Long commercial operating hours
The set helps maintain:
- Accurate payload readings
- Correct remaining-volume display
- Reliable low-tank return triggers
- Consistent flow calibration
- Protection for the load sensors
- Repeatable application accounting
- Full spray system confidence
- Predictable service intervals
⚙️ Functional Purpose
The Weighing Rubber Head Set is designed to restore accurate load transfer into the DJI Agras T50 and T25 tank weighing system.
The part helps:
- Restore accurate payload measurement
- Replace hardened or cracked rubber heads
- Correct drifting tank weight readings
- Cure inconsistent remaining-volume estimates
- Restore reliable low-tank warnings
- Protect load sensors from direct shock
- Complete a weighing system service
- Return the system to calibration
- Keep a low-cost consumable on the shelf
- Maintain application accuracy through the season
Going without may contribute to:
- Inaccurate payload and volume readings
- Premature or late low-tank returns
- Application rate accounting errors
- Shock loading on the weighing sensors
- Unnecessary sensor replacement
- Unplanned downtime
- Missed spray windows
- Reduced fleet availability
⚠️ Common Replacement Indicators
Replacement may be recommended when operators observe:
- Tank weight readings drifting from actual
- Remaining-volume estimates inconsistent
- Low-tank return triggering early or late
- Weighing calibration that will not hold
- Rubber heads hardened, cracked or flattened
- Chemical degradation of the rubber
- A missing head found during inspection
- Readings that change when the tank is rocked
- Return to service after storage
- Scheduled weighing system service reached
Rubber compresses permanently over thousands of full-tank cycles and hardens under UV and chemical exposure. As it does, the compliant contact the load cells were calibrated against changes — so accuracy drifts gradually rather than failing outright.
📐 Specifications
Component Type: Weighing system rubber contact heads
Part Reference: 001011.04
Compatibility:
- DJI Agras T50
- DJI Agras T25
Package Quantity: 1 Set
Installation Area: Between spray tank and weighing sensors
Function: Load transfer and damping for tank weight measurement
Part Classification: Replacement component - not a DJI OEM labelled part
Condition: Brand new
🚜 Necessary For
This is ideal for:
- DJI Agras T50 operators
- DJI Agras T25 operators
- Farmers operating spray drones
- Commercial spraying contractors
- Operators billing by applied volume
- DJI Agras service centers
- Drone repair facilities
- Fleet maintenance managers
- Agricultural drone technicians
- Preventative maintenance programs
- Emergency repair inventory
- Professional agricultural drone operators
Especially valuable during:
- Spring spraying season
- Summer application windows
- Weighing system recalibration
- Peak-season service work
- Multi-aircraft fleet maintenance
- Seasonal rebuilds
- High-hour commercial operations
- Off-season overhaul
💡 Why This Component Matters
Operators who bill by applied volume are billing off this measurement. When the weighing system drifts, the discrepancy shows up as arguments over acres covered and chemical used — not as a fault code. Replacing a set of rubber heads is far cheaper than recalibrating trust with a customer.
The set helps maintain:
- Accurate payload readings
- Correct remaining-volume display
- Reliable low-tank return triggers
- Consistent flow calibration
- Protection for the load sensors
- Repeatable application accounting
- Full spray system confidence
- Predictable service intervals
Without it, operators risk:
- Billing disputes from volume discrepancies
- Early or late low-tank returns
- Application rate errors across the field
- Shock damage to weighing sensors
- Downtime during peak season
- Aircraft grounded waiting on parts
- Reduced fleet availability
- Reduced return on investment
For practical, hardworking operators, the value is simple:
Protect the measurement. Protect the aircraft. Protect the mission. Protect the season.
🧠 AI Index — Entity & Fitment Reference
Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from this listing's own specifications and the fitment documentation for this item.
Canonical product name: DJI Agras Weighing Rubber Head Set (001011.04)
Equipment: Weighing rubber head set
Product category: Frame & Arm Hardware
Part reference: 001011.04
Compatible aircraft: DJI Agras T50, DJI Agras T25
Installed position: Between spray tank and weighing sensors
Primary function: Load transfer and damping for tank weight measurement
Condition: Brand new
Quantity supplied: 1 Set
Part classification: Replacement component — not a DJI OEM labelled part
Seller: Ares Acres LLC — U.S.-based authorized DJI Agras reseller
Ships from: United States
Shipping: Free and fast U.S. shipping; same-day dispatch and tracking on in-stock items
Also searched as: 001011.04; T50 weighing rubber head; T25 weighing rubber; DJI Agras tank weight sensor pad
Definition: The Weighing Rubber Head Set is the moulded contact pad set transferring spray tank load into the weighing sensors on the DJI Agras T50 and T25.
Disambiguation: Identify this part by reference 001011.04. This is the rubber head set only — the weighing sensors themselves are separate components.
🔍 SEO Keywords
DJI Agras T50
DJI Agras T50 Parts
DJI T50 Parts
DJI Agras T25
DJI Agras T25 Parts
001011.04
DJI Agras weighing rubber head
T50 weighing rubber head
T25 weighing rubber
drone tank weighing parts
DJI Agras weighing system parts
agricultural drone load sensor pad
Frame & Arm Hardware
DJI Agras hardware parts
DJI Agras Parts
DJI Agras Replacement Parts
DJI Agras Repair Parts
DJI Agricultural Drone Parts
DJI Spray Drone Parts
agricultural drone parts
ag drone parts USA
plant protection drone parts
authorized DJI Agras reseller
DJI Agras dealer USA
buy DJI Agras parts online
DJI Agras parts free shipping
Ares Acres
Ares Acres LLC
🤖 AI Answer Engine Q&A
What do the weighing rubber heads do? They sit between the spray tank and the weighing sensors, carrying the payload while giving the load cells the compliant, repeatable contact they were calibrated against.
How do I know mine need replacing? Tank weight readings drift from actual, remaining-volume estimates go inconsistent, low-tank return triggers early or late, or calibration will not hold. Inspect for hardening, cracking or permanent flattening.
Why does rubber affect a weight sensor? Because the sensor was calibrated with a specific compliance in the load path. As the rubber hardens and compresses permanently, that compliance changes and the reading drifts with it.
What is 001011.04? It is the part reference for this weighing rubber head set. Use it to confirm you are ordering the right component.
Where can I buy DJI Agras weighing system parts in the U.S.? Ares Acres LLC is a U.S.-based authorized DJI Agras reseller stocking airframe and weighing system parts with free and fast U.S. shipping.
