DJI Air 3 / Air 3S OEM Body Screw Kit
Model-family replacement screw and small-fastener assortment for DJI Air 3 and Air 3S airframe service, shell replacement, arm repair, internal electronics access, and complete post-teardown reassembly.
Product classification
-
Compatible aircraft: DJI Air 3, DJI Air 3S
-
System: Airframe / body hardware
-
Component: Body screw and fastener kit
-
Condition: New
-
OEM status: Supplier-listed as original/OEM replacement hardware; exact DJI material-number breakdown should be verified when available
Typical repair applications
- Upper, middle, or lower shell service
- Front and rear arm replacement
- Arm-axis / hinge repairs
- Internal chassis disassembly
- ESC, GPS, vision, IMU, or core-board access
- Camera and gimbal-area service
- Replacement of stripped, damaged, corroded, or missing fasteners
- Reassembly after crash teardown or donor-part repair
Compatibility guidance
This supplier variant is cataloged for the Air 3 / Air 3S family. Verify each fastener by original position and dimensions before installation. Similar-looking screws may differ in thread, length, shoulder profile, head geometry, captive washer configuration, or mounting depth.
Installation notes
Organize screws by position during teardown whenever possible. Match the replacement against the removed fastener before tightening. Use the correct precision driver and avoid excessive torque into polymer bosses, inserts, or lightweight frame structures. If the screw binds or bottoms early, remove it and re-check fitment.
Why model-specific hardware matters
Incorrect screws can damage internal electronics, strip a threaded insert, deform a shell boss, prevent proper panel alignment, create looseness at an arm joint, or interfere with camera, gimbal, or sensing assemblies. Correct fastener selection is part of restoring mechanical integrity after repair.
Recommended repair workflow
- Confirm the aircraft is Air 3 or Air 3S.
- Record original screw locations before disassembly.
- Compare replacement length, thread, and head profile.
- Inspect the mating boss, insert, or bracket for damage.
- Reassemble in stages and verify alignment before final tightening.
- Confirm arm movement, shell fit, camera/gimbal clearance, and all sensor openings after repair.
Package scope
One Air 3 / Air 3S body screw kit as supplied. The supplier image shows a mixed assortment of model-family screws and small hardware. Exact quantity and composition may vary by production batch; current product media and fulfillment specification should be treated as the final reference.
SEO / search terms
DJI Air 3 screw kit, DJI Air 3S screws, Air 3 body screws, Air 3S body screw kit, DJI Air hardware kit, Air 3 repair screws, Air 3 shell screws, Air 3S arm screws, DJI OEM drone fasteners.
FAQ
Does this fit both Air 3 and Air 3S?
The supplier variant is presented for the Air 3 / Air 3S family. Individual screw locations should still be verified during installation.
Is this intended for one specific screw location?
No. It is a mixed body-hardware kit covering multiple repair points across the aircraft.
