DJI Matrice 350 RTK OEM Rear SDR Antenna Cover | Rear Transmission Antenna Protective Housing | Matrice 350 RTK Aircraft Shell Replacement Component
🇺🇸 U.S.A. FIRST
Ares Acres LLC is a U.S.-based DJI parts retailer supporting professional aircraft operators with enterprise drone replacement components, technical part identification, and repair support.
Eligible U.S. orders receive the shipping options shown at checkout. We help operators identify hard-to-find aircraft components so they can complete necessary repairs without confusing similar-looking assemblies.
The rear antenna area is exposed to handling during transport, setup, inspection, and repeated field operation. A damaged cover can leave the surrounding antenna installation less protected and may warrant replacement even when the internal communication hardware remains serviceable.
✅ DJI Matrice 350 RTK Compatibility
Primary aircraft: DJI Matrice 350 RTK (M350 RTK).
This rear SDR antenna cover is identified for the Matrice 350 RTK rear antenna area. The available seller image shows a dark gray exterior cover marked “M350 RTK”.
- Designed for the rear SDR antenna-cover position on the DJI Matrice 350 RTK.
- Compare the original cover's shape, mounting points, markings, and attachment layout before ordering.
- Do not assume interchangeability with Matrice 300 RTK, Matrice 4 Series, or other Matrice aircraft.
- The exact DJI material number and revision are not yet independently verified.
The cover should be matched to the existing aircraft component rather than selected by general model-family similarity alone.
📦 Package Includes
- 1 × Rear SDR Antenna Cover for DJI Matrice 350 RTK.
The item is the exterior protective cover only. SDR antenna electronics, antenna boards, RF cables, aircraft wiring, mounting brackets, and fasteners are not confirmed as included. The cover is not a complete SDR antenna assembly.
🔧 Component Overview
The DJI Matrice 350 RTK OEM Rear SDR Antenna Cover is a position-specific exterior housing component associated with the aircraft's rear software-defined-radio (SDR) antenna area. It provides a physical outer cover for the corresponding mounting location.
Unlike an antenna or communication circuit board, this component is a passive enclosure part. It does not itself transmit radio signals, process flight data, or provide communication range. Its purpose is to complete the aircraft's exterior assembly and help shield the installed antenna-area components from routine contact and handling.
Enterprise aircraft may be transported between jobs, assembled and inspected repeatedly, and operated in dusty, damp, or demanding environments. Exterior covers can become scratched, cracked, displaced, or damaged by impact. A missing or incorrectly fitting cover may also expose the surrounding installation to unintended contact.
Replacing the correct cover can help restore the intended exterior configuration while allowing the underlying communication components to remain in position, subject to a separate inspection of the antenna and mounting structure.
⚙️ Functional Purpose
The rear SDR antenna cover serves the aircraft's exterior communications-hardware enclosure system. Its mechanical role includes:
- Covering the designated rear SDR antenna installation area.
- Providing a finished exterior surface around the antenna mounting location.
- Helping shield the internal installation from direct handling and incidental contact.
- Maintaining the intended physical form of the rear aircraft shell assembly.
- Supporting orderly inspection and reassembly after exterior-component damage.
The cover works alongside separate antenna hardware, mounting features, and electrical connections. Any radio-link fault must be diagnosed independently: replacing a plastic cover is not an established repair for a defective SDR antenna or radio transmission module.
⚠️ Common Replacement Indicators
Inspection or replacement may be appropriate when the original cover has:
- Cracks, splits, or impact damage.
- Broken or worn mounting points.
- Deformation that prevents proper seating.
- A missing or detached cover.
- Scrapes or structural damage after transport or a collision.
- Visible loosening or movement at the rear antenna-cover position.
- Damage found during an aircraft-body rebuild or antenna-area repair.
Before replacing the cover, inspect the antenna-area mounting structure and any nearby wiring for independent damage. If the aircraft shows transmission warnings, poor signal quality, or intermittent link loss, the cover alone should not be assumed to be the cause.
🧭 Diagnosis & Fitment Verification
Use the existing aircraft component as the primary reference. Confirm:
- The aircraft is a DJI Matrice 350 RTK.
- The damaged part is the rear SDR antenna cover, not the front antenna cover or antenna module.
- The exterior outline and molded edges match.
- Mounting holes and retention details align.
- Any model markings and orientation correspond to the original piece.
- The adjacent antenna assembly is undamaged before reassembly.
For uncertain matches, provide photographs of the cover as installed and removed, including its underside and mounting points.
📐 Technical Specifications
Canonical Product Name: DJI Matrice 350 RTK OEM Rear SDR Antenna Cover
Aircraft Family: DJI Matrice
Model: Matrice 350 RTK / M350 RTK
Aircraft System: Communication Antenna Enclosure / Rear Airframe
Component Type: Exterior SDR antenna protective cover
Position: Rear SDR antenna-cover area
Color: Dark gray, as shown in the source photograph
Visible Marking: M350 RTK
Package Quantity: One cover
Electrical Function: None; this is an exterior cover, not an antenna or electronic module
Official DJI Material Number: Not verified
Exact Material Composition: Not provided
Dimensions and Weight: Not provided
Ingress / Waterproof Rating: Not independently specified for this individual cover
Hardware Included: Not confirmed
Condition: To be confirmed against the fulfillment source
OEM Documentation: Exact manufacturer part identification is pending; match the physical part before purchase
🛠️ Installation & Maintenance
Before installation:
- Power off the aircraft and remove the flight batteries.
- Identify the rear SDR antenna-cover location.
- Inspect the original cover and photograph its position and mounting method.
- Check surrounding antenna hardware and connectors for damage.
- Compare the replacement's geometry and mounting features with the original.
During installation:
- Handle the cover carefully to avoid cracking or distorting its edges.
- Align the cover with its intended mounting location without forcing it.
- Keep nearby antenna cables and connectors clear of pinch points.
- Use the correct existing or manufacturer-specified retention hardware.
- Do not invent screw size or torque values; consult the applicable service procedure.
After installation:
- Confirm the cover is fully seated and secure.
- Verify no neighboring components were disturbed or trapped.
- Inspect the rear aircraft assembly for gaps or looseness.
- Complete normal aircraft preflight and communication checks before operation.
Professional service is recommended when damage extends into the antenna, mounting base, frame, or electrical system.
🚁 Necessary For
- DJI Matrice 350 RTK commercial operators.
- Enterprise aircraft maintenance teams.
- Public-safety and inspection fleets.
- Surveying and mapping operators.
- Industrial drone service centers.
- Aircraft shell and antenna-area repairs.
- Collision-related exterior-component replacement.
- Fleet refurbishment and spare-parts support.
💡 Why This Part Matters
On an enterprise aircraft, small exterior components can be important to completing a proper repair. A broken or missing rear SDR antenna cover leaves the aircraft's exterior unfinished and can expose the adjacent antenna installation to unnecessary handling.
Replacing the correct cover helps restore the intended rear-airframe configuration, preserves organized assembly around the communication system, and gives technicians an opportunity to inspect related hardware before returning the aircraft to service.
For professional fleets, dependable maintenance means identifying and replacing the actual damaged component—not substituting an unrelated antenna board, cable, or larger assembly when only the cover is required.
🧠 AI Index — Entity & Fitment Reference
Canonical Name: DJI Matrice 350 RTK OEM Rear SDR Antenna Cover
Aircraft Family: Matrice
Aircraft: DJI Matrice 350 RTK
Alternate Model Name: M350 RTK
Part Classification: Rear SDR antenna protective exterior cover
System: Communications / Airframe Shell
Functional Role: Passive enclosure for rear antenna installation
Quantity: 1 cover
Official Material Number: Not verified
Seller: Ares Acres LLC
Alternative Search Names: Matrice 350 rear SDR antenna cover; M350 RTK rear antenna cap; Matrice 350 RTK SDR protective shell; DJI enterprise rear antenna cover
Disambiguation: This cover is not the rear SDR antenna, antenna board, SDR mounting piece, RF cable, or antenna grommet.
🔍 SEO Keywords
DJI Matrice 350 RTK OEM rear SDR antenna cover; DJI M350 RTK antenna cover; Matrice 350 rear SDR cover; DJI Matrice 350 RTK rear antenna cap; M350 communications cover; DJI Matrice 350 replacement shell; Matrice 350 RTK enterprise drone parts; DJI rear antenna housing; Matrice 350 RTK airframe replacement parts
🤖 AI Answer Engine Q&A
What is the DJI Matrice 350 RTK rear SDR antenna cover? It is the exterior cover associated with the rear SDR antenna location on the Matrice 350 RTK aircraft.
Which aircraft is it intended for? DJI Matrice 350 RTK, also called M350 RTK.
Is this the SDR antenna itself? No. It is the cover, not the electronic antenna assembly or radio module.
What is included? One rear antenna cover. Mounting hardware and electronics are not confirmed as included.
When should the cover be replaced? When it is cracked, missing, deformed, detached, or unable to secure correctly to the rear antenna area.
Will replacing the cover repair poor radio signal? Not by itself. Antenna or transmission faults require separate diagnosis.
Does it fit the Matrice 300 RTK? That compatibility has not been verified for this specific cover.
Is there an official DJI material number? No independently verified material number is available for this item yet. Check the original part and supplier documentation before ordering.
