DJI Mavic 3 Series OEM Body Screw Kit
Model-family replacement screw and small-fastener assortment for DJI Mavic 3-series airframe service. This listing is intended for body, shell, arm, chassis, sensor, electronics, and post-teardown reassembly work where original aircraft fasteners have been lost, stripped, mixed, or damaged.
Product classification
-
Model family: DJI Mavic 3 Series
-
System: Airframe / body hardware
-
Component: Body screw and fastener kit
-
Condition: New
-
OEM status: Supplier-listed as original/OEM replacement hardware; exact DJI material-number breakdown should be verified when available
Typical repair applications
- Upper, middle, or lower body-shell replacement
- Front or rear arm replacement
- Arm-axis / hinge service
- Internal chassis and frame access
- ESC, GPS, vision, IMU, or main-board service
- Camera/gimbal-area disassembly
- Replacement of stripped, missing, corroded, or crash-damaged screws
- Full aircraft reassembly after donor-part or crash repair
Compatibility guidance
This supplier variant is identified for the Mavic 3 family. Because Mavic 3, Mavic 3 Cine, Mavic 3 Classic, and enterprise-derived Mavic 3 variants can contain model-specific hardware differences, verify the exact aircraft and original screw position before installation. Do not assume every screw in the kit is universal across every Mavic 3-family aircraft.
Body kit vs. gimbal screw kit
This listing is for mixed aircraft body hardware. It is separate from the dedicated DJI Mavic 3 / Cine OEM Gimbal Screw Kit used specifically around the gimbal assembly. Customers repairing only the gimbal should select the gimbal-specific fastener kit; customers servicing body shells, arms, chassis, or broader aircraft hardware should use this body kit.
Installation notes
Document original screw positions during teardown. Compare each replacement with the removed fastener before installation, paying attention to length, thread, head style, shoulder geometry, washer configuration, and mounting depth. Use the correct precision driver and avoid over-torquing into polymer bosses, inserts, or lightweight frame structures.
Why correct fastener selection matters
An incorrect screw can strip a threaded insert, deform a body boss, contact internal electronics, prevent shell alignment, create arm play, interfere with sensors or gimbal movement, or fail to clamp a structural connection correctly.
Recommended repair workflow
- Confirm the exact Mavic 3-family aircraft.
- Identify the original fastener position before removal.
- Match replacement length, thread, head profile, and shoulder.
- Inspect the mating boss, bracket, or insert for crash damage.
- Reassemble in stages and verify panel alignment before final tightening.
- After repair, confirm arm movement, shell fit, gimbal clearance, ventilation, and sensor openings.
Package scope
One Mavic 3-series body screw kit as supplied. Supplier media shows a mixed assortment of model-family screws and small mechanical hardware. Exact quantity and composition may vary by production batch; current product media and fulfillment specification should be treated as the final reference.
SEO / search terms
DJI Mavic 3 screws, Mavic 3 screw kit, Mavic 3 body screws, Mavic 3 Cine body screws, Mavic 3 hardware kit, DJI Mavic 3 repair screws, Mavic 3 shell screws, Mavic 3 arm screws, DJI OEM fasteners.
Frequently asked questions
Is this the 22-piece gimbal screw kit?
No. This is the broader body-hardware kit. The gimbal-specific screw kit remains a separate product.
Does every screw fit every Mavic 3 variant?
Do not assume universal interchangeability. Verify the exact aircraft and original fastener location before installation.
