DJI Mini 3 OEM Gimbal Camera

The DJI Mini 3 OEM Gimbal Camera is the complete stabilised camera assembly at the nose of the DJI Mini 3: the camera head, the three-axis gimbal that holds it, and the flex cable and connectors that join it to the aircraft. As shown in the product images, it is an all-black assembly, with curved gimbal arms and round motor housings, a squared camera head with its lens set into the front face, a thin flat flex cable leaving the top of the gimbal, a short bundle of fine wires ending in a small connector, and a mounting end with locating tabs. It records every photograph and every second of video the aircraft takes, and it holds the picture steady and level while the aircraft moves. It is identified for the DJI Mini 3, and it is not a part for the DJI Mini 3 Pro, which has its own gimbal camera behind a differently shaped nose, or for the DJI Mini 4 Pro, whose gimbal camera full assembly we list separately. Pilots usually reach it while searching for a Mini 3 gimbal replacement, a DJI Mini 3 camera, a Mini 3 gimbal camera assembly, a Mini 3 gimbal motor overload or a Mini 3 crash camera repair. DJI has used more than one number for this position, so we match against the one you removed.

---

✅ DJI Mini 3 Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the DJI Mini 3, the gimbal camera position at the nose
• Matched by the gimbal arms, the camera head, the flex cable route and the connectors against the assembly you removed
• Genuine DJI OEM gimbal camera, supplied as one complete assembly from mounting end to camera head

The Mini 3 name is shared by more than one aircraft, and the gimbal camera is where they part ways. This assembly is for the DJI Mini 3. The DJI Mini 3 Pro carries a different gimbal camera and is not claimed here, and the DJI Mini 4 Pro gimbal camera full assembly is a separate product. If the nose of your aircraft has a pair of forward-facing vision sensors above the camera, it is a Pro, and this is not your part.

---

📦 Package Includes

• 1 × DJI Mini 3 OEM Gimbal Camera: camera head, three-axis gimbal, flex cable and connectors as one assembly, as shown in the product images

One assembly, not a camera alone. The camera head, the gimbal arms and motors, the mounting end, the flex cable and the wire bundle arrive already joined, in the arrangement the aircraft expects.

What is part of the assembly: the black camera head with its lens, the curved gimbal arms and round motor housings, the mounting end with its locating tabs, the thin flat flex cable from the top of the gimbal, and the short bundle of fine wires ending in a small connector.

Not included: the front shell or gimbal cover, the transport gimbal protector, screws, the aircraft's main board, a memory card, filters and lens covers. The assembly is the gimbal camera only.

Nothing is included because it appears in a photograph. If an image shows a surface or anything not named above, it is not part of the order. The order is one gimbal camera assembly.

---

🔧 Component Overview

The DJI Mini 3 is small enough to fold into a jacket pocket, and its camera sits right at the front of it, exposed, on a three-axis gimbal. The gimbal's motors turn the camera against every movement of the aircraft so the picture stays steady and level. The gimbal camera is the whole of that: the camera that records, the arms and motors that steady it, and the cable and connectors that join it to the aircraft.

As shown in the product images, the assembly has these features:

• The camera head — black and squared, with the lens set into its front face
• The gimbal arms — curved black arms carrying the camera on its axes
• The motor housings — round black motors at the joints, one per axis
• The mounting end — a black motor end with locating tabs where the gimbal is fixed to the aircraft
• The flex cable — a thin flat cable leaving the top of the gimbal
• The wire bundle — a short bundle of fine wires ending in a small connector

Where it sits and what it touches:

• Position: the nose of the DJI Mini 3, in front of and slightly below the body
• Connects to: the aircraft's internal board through its flex cable and connector
• Exposed to: anything the aircraft flies into nose first, and the ground on tip-overs
• System: gimbal and camera

A light aircraft with its camera at the front takes most of its knocks on the camera. Over its life the gimbal camera sees:

• Nose-first contact with branches, walls and ceilings
• Tip-overs on landing that strike the camera head on the ground
• Being powered on with the gimbal protector still fitted
• Dust and grit reaching the motors from take-offs on bare ground
• Flex cables creased when the nose is opened for another repair

The assembly is replaced when a gimbal arm is bent or cracked, when a motor has failed, when the flex cable or wire bundle is torn, when the camera is no longer detected, or when the camera head or lens is damaged beyond cleaning.

---

⚙️ Functional Purpose

The gimbal camera's engineering role is to record the aircraft's photographs and video and to keep that picture steady and level while a very light aircraft is pushed about by its own movement and by the wind.

On the Mini 3 it:

• Holds the camera on three motorised axes and turns it against the aircraft's movement
• Keeps the horizon level as the aircraft banks and the picture steady as it accelerates and brakes
• Lets the pilot tilt the camera from the remote controller
• Records photographs and video through the camera head
• Passes the camera's picture and signals into the aircraft through its flex cable and connector
• Runs a start-up motion at power-on, checking that each axis can move freely

Because the gimbal, the camera and the cable are one assembly, a fault in any of them shows up in the same place, the picture. A crooked horizon, a shaking image, a camera that will not tilt and a camera that is not detected can each be the gimbal, the camera, the cable or something simpler.

What the gimbal camera does not do matters as much:

• It does not carry the video link to the controller; the aircraft's transmission system does
• It does not fly or position the aircraft
• It does not store recordings by itself; a memory card does
• It does not fix a controller, app or mobile device that is not showing the picture

---

🔍 Diagnosis — the Mini 3 and the Mini 3 Pro share a name, not a gimbal camera

The most common wrong order for a Mini 3 gimbal camera starts with the name. The DJI Mini 3 and the DJI Mini 3 Pro are different aircraft with different gimbal cameras, and a large share of owners call either of them a Mini 3. Settle which one you fly before looking at the fault.

Step one: identify the aircraft.

• Look at the nose: the Mini 3 Pro has a pair of forward-facing vision sensors above the camera; the Mini 3 does not
• Look at the back: the Mini 3 Pro also has a pair of rear-facing vision sensors; the Mini 3 does not
• Check the app or the box: the name there settles it
• Mini 4 Pro: a different aircraft again, with a different gimbal camera that we list separately as a full assembly
• Not sure: send us a photograph of the nose of your aircraft and we will match it

Step two: decide whether the gimbal camera is actually the fault.

• A gimbal error at power-on with the gimbal protector still fitted: remove the protector and restart; nothing is broken
• Something touching the camera at power-on, such as grass, a strap or a case: clear it, place the aircraft on a flat, hard surface and restart
• A bent or cracked arm, a cracked camera head or a damaged lens: the assembly is the part
• A motor that grinds, will not turn or stays limp with nothing stopping it: the assembly is the part
• A torn flex cable or a damaged connector: the cable is part of the assembly, so the assembly is the part
• A tilted horizon: run the gimbal calibration in the app first; replace the assembly only if it stays tilted

Clear these first, because they are often blamed on the camera:

• No picture in the app but recording works: look at the link, the app and the mobile device
• Recording fails: try a different memory card and format it in the aircraft
• Firmware: update the aircraft and check again

Once you know the aircraft is a Mini 3, without forward sensors above the camera, and the damage is in the gimbal camera itself, this assembly is the repair.

---

⚠️ Common Replacement Indicators

Replace the gimbal camera when inspection confirms one of these:

• A gimbal arm that is bent, cracked or no longer square after a crash
• A gimbal motor that grinds, will not turn or stays limp after a restart
• A torn or creased flex cable, or a damaged connector
• A cracked camera head or a damaged lens
• A camera that is not detected, with the connector confirmed seated
• A horizon that stays tilted after the gimbal calibration

Inspect these first, because they produce similar symptoms:

• The gimbal protector, which must be removed before power-on
• Anything touching the camera or the arms at power-on
• The flex cable connector, for one that has lifted from its socket
• The memory card, if the problem is only with recording
• The app, the mobile device and the video link, if the problem is only with the live view
• The aircraft firmware and the gimbal calibration

There is no service interval for a gimbal camera. Replace it on evidence: damage to the gimbal, the camera or the cable.

---

📐 Specifications

Product name: DJI Mini 3 OEM Gimbal Camera

DJI family: Mini

Aircraft: DJI Mini 3

Fitment basis: Identified for the DJI Mini 3

Variants: DJI Mini 3

System: Gimbal and camera

Component type: Complete three-axis gimbal camera assembly with flex cable and connectors

Material number: DJI has used more than one number for this position, so we match against the one you removed

Quantity: 1 assembly

Stabilisation: Three-axis motorised gimbal

Camera head: Black, squared, with the lens set into the front face

Gimbal arms and motors: Curved black arms with round black motor housings

Connection: Thin flat flex cable from the top of the gimbal and a short bundle of fine wires ending in a small connector

Mounting end: Black motor end with locating tabs

Colour: Black throughout

Camera performance figures: Not published for this part

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: Power and signal through the flex cable and connector; values not published for this part

Mounting position: Nose of the aircraft

Installation method: Gimbal fixed at the nose by its mounting end; flex cable and connector routed into the aircraft and seated

Not included: Front shell or gimbal cover, gimbal protector, screws, main board, memory card, filters, lens covers

Service adjustability: None on the part itself; the gimbal calibration in the app is run after fitting

Classification: DJI OEM gimbal camera; complete assembly

---

🛠️ Installation & Maintenance

Before installation

• Confirm the aircraft is a DJI Mini 3, with no forward-facing vision sensors above the camera, and not a Mini 3 Pro or Mini 4 Pro
• Confirm the fault is the gimbal camera and not the protector, something touching the gimbal, the memory card or the video link
• Remove the battery and the propellers, and work on a clean, soft, well-lit surface
• Photograph the aircraft and each stage as you open the nose: screw positions, cable routes and connector positions
• Have the correct small screwdrivers, plastic opening tools and a tray for screws
• Compare the new assembly with the old one: arms, camera head, mounting end, flex cable and connector

During installation

• Support the old gimbal while you release it, so it does not hang from its cable
• Release each connector by lifting it straight from its socket, never by pulling the cable
• Note exactly how the flex cable and wire bundle run into the aircraft before you remove them
• Seat the new gimbal by its mounting end, with the locating tabs fully engaged
• Route the flex cable and wire bundle along the same path as the old ones, with no sharp fold and nothing pressing on them
• Seat each connector fully and close the aircraft evenly, refitting the screws without overtightening

After installation

• Remove the gimbal protector and make sure nothing touches the gimbal
• Place the aircraft on a flat, hard surface and power on; the gimbal should run its start-up motion freely and settle level
• Confirm the camera is detected and the live view appears in the app
• Run the gimbal calibration in the app if the horizon is not level
• Record a short clip and a photograph and check both on the memory card
• Fly a short, low test before a flight that matters

Looking after the new gimbal camera. Fit the gimbal protector only with the aircraft off and remove it before every power-on, take off and land on a flat, clean surface, and keep the nose clear of branches and ceilings indoors. On an aircraft this light, the camera takes almost every knock.

---

🎯 Who This Is For

This assembly is for Mini 3 pilots and repair technicians whose gimbal or camera has failed:

• DJI Mini 3 owners whose gimbal arm was bent or camera head cracked in a crash or tip-over
• Pilots whose gimbal motor grinds, will not turn or stays limp after a restart
• Pilots whose camera is no longer detected and whose connector is seated
• Owners whose gimbal flex cable was torn or creased during a crash or an earlier repair
• Independent drone repair shops restoring a Mini 3 to flying order
• Pilots who want the original camera assembly back on a Mini 3 they still fly

This is not the part you need if:

• Your aircraft is a Mini 3 Pro, with forward-facing vision sensors above the camera; it takes a different gimbal camera
• Your aircraft is a Mini 4 Pro; its gimbal camera full assembly is a separate product
• Only the gimbal signal cable is damaged and the camera and gimbal are fine; the gimbal signal cable is a separate product
• The camera head is fine and only the gimbal housing or one of its motors is damaged; an empty gimbal housing with motor is listed separately
• The gimbal error clears once the protector is removed or nothing is touching the gimbal
• The horizon levels after a gimbal calibration
• Only the live view is missing; look at the link, the app and the mobile device
• Recording fails but the camera is detected; try a different memory card

---

💡 Why This Part Matters

The Mini 3 gimbal camera is the most valuable part on the aircraft, and the name on the aircraft is the easiest thing to get wrong when ordering it.

DJI built the Mini 3 and the Mini 3 Pro as separate aircraft. They fold the same way, look alike from above, and owners of both call their aircraft a Mini 3. The gimbal cameras are different parts. The Pro's nose is shaped around a pair of forward-facing vision sensors that sit above its camera; the Mini 3 has no forward sensors at all. A gimbal camera ordered by the name alone has a fair chance of being the wrong one.

So the first check takes five seconds. Look at the nose of your aircraft. If there is only the camera, with no pair of sensor windows above it, it is a Mini 3, and this assembly is its gimbal camera. If there are two sensor windows above the camera, it is a Pro, and this is not its part. The Mini 4 Pro is different again, and its full assembly is listed separately.

The second check is whether the gimbal camera is really the fault. A protector left in place, something touching the gimbal at power-on, an uncalibrated horizon, a failing memory card or a weak video link all make a healthy gimbal camera look broken. A bent arm, a dead motor, a torn cable or a cracked camera head do not recover, and the whole assembly is the honest repair.

When it is the answer, it replaces the camera, every gimbal motor and arm, and the cable in one step, and the Mini 3 comes back steady and level.

If you are unsure which Mini you have, send us a photograph of the nose of the aircraft. We will match it for you.

---

📦 Shipping & Support

Ares Acres LLC is a U.S.-based authorized DJI retailer supporting DJI pilots, drone owners, and independent repair shops with genuine replacement parts and the inventory it takes to get an aircraft flying again.

FREE & FAST Shipping is included for all U.S. customers, with same-day dispatch and tracking on in-stock parts.

Ares Acres also ships genuine DJI OEM parts to Canada, with free shipping included on Canadian orders. Canadian customers see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

Photograph the nose of your aircraft from the front, and send us that photograph if you want the match confirmed. Whether there are sensor windows above the camera settles which Mini 3 you have, and a picture of the gimbal itself settles the fit.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Mini 3 OEM Gimbal Camera

Brand: DJI

DJI family: Mini

Aircraft: DJI Mini 3

Compatible models: DJI Mini 3

Fitment basis: Identified for the DJI Mini 3

Component: Complete three-axis gimbal camera assembly

System: Gimbal and camera

Installed position: Nose of the aircraft

Primary function: Records photographs and video and keeps the picture steady and level

Form: Black curved gimbal arms and round motors, squared black camera head, thin flat flex cable, fine wire bundle with a small connector, mounting end with locating tabs

Material number: DJI has used more than one number for this position; matched against the assembly you removed

Quantity supplied: 1 assembly

Material, dimensions and weight: Not published for this part

Not included: Front shell or gimbal cover, gimbal protector, screws, main board, memory card, filters, lens covers

Key identification: No forward-facing vision sensors above the camera means Mini 3, which this fits; a pair of sensors above the camera means Mini 3 Pro, which it does not

Common wrong order: A Mini 3 gimbal camera bought for a Mini 3 Pro or Mini 4 Pro, or for a fault caused by the protector or the memory card

Check first: Protector removed, nothing touching, flat surface, connector seated, calibration run, memory card good

When this assembly is the repair: Bent arm, failed motor, torn flex cable, damaged connector, cracked camera head or lens

Related product: DJI Mini 4 Pro gimbal camera full assembly, listed separately

Part classification: DJI OEM gimbal camera

Also searched as: Mini 3 gimbal; DJI Mini 3 camera; Mini 3 gimbal camera assembly; Mini 3 gimbal motor overload; Mavic Mini 3 gimbal

Disambiguation: Complete assembly for the DJI Mini 3; not for the Mini 3 Pro or Mini 4 Pro, not a camera head alone

Seller: Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

Mini 3 gimbal

DJI Mini 3 camera

Mini 3 gimbal camera assembly

Mini 3 gimbal replacement

Mini 3 camera replacement

Mavic Mini 3 gimbal camera

Mini 3 gimbal motor overload

Mini 3 gimbal error

Mini 3 camera not detected

Mini 3 gimbal arm

Mini 3 gimbal flex cable

Mini 3 crash camera repair

DJI Mini 3 gimbal

DJI Mini 3 Gimbal Camera

Mini 3 Gimbal Camera

DJI Mini 3 OEM Gimbal Camera

Mini 3 gimbal camera replacement

DJI Mini 3 parts

DJI Mini 3 replacement parts

DJI Mini 3 repair parts

DJI Mini 3 spare parts

DJI gimbal camera replacement

DJI Mini OEM parts

DJI drone camera repair

Mini 3 parts

authorized DJI retailer

DJI Mini 3 Gimbal Camera Canada

DJI Mini 3 parts Canada

DJI Mini parts shipped to Canada

buy DJI Mini 3 parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Mini 3 gimbal camera? It is the complete stabilised camera assembly from the nose of the DJI Mini 3: camera head, three-axis gimbal, flex cable and connectors, as one part.

Which aircraft does it fit? It is identified for the DJI Mini 3. Send us a photograph of the nose of your aircraft and we will match it.

Will it fit my Mini 3 Pro? No. The Mini 3 Pro carries a different gimbal camera, behind a nose shaped around forward-facing vision sensors.

How do I tell a Mini 3 from a Mini 3 Pro? Look at the nose. The Mini 3 Pro has a pair of forward-facing vision sensors above the camera. The Mini 3 has none.

Will it fit my Mini 4 Pro? No. The Mini 4 Pro has its own gimbal camera, which we list separately as a full assembly.

Only my gimbal cable is torn. Do I need the whole assembly? Not if the camera and gimbal are fine. The gimbal signal cable is a separate product, and so is an empty gimbal housing with motor for a camera head that is undamaged.

Is the camera included or just the gimbal? Both. The camera head, gimbal arms, motors, flex cable and connectors arrive together as one assembly.

My gimbal shows an error at start-up. Is it broken? Not necessarily. Remove the gimbal protector, make sure nothing touches the camera, place the aircraft on a flat surface and restart.

My horizon is tilted. Do I need a new gimbal camera? Run the gimbal calibration in the app first. If it stays tilted, or an arm is bent, replace the assembly.

The camera records but I see nothing in the app. Is it this part? Probably not. A missing live view with working recording points at the link, the app or the mobile device.

Does it come with the gimbal protector? No. Keep your existing protector, and remove it before every power-on.

Are screws included? No. Reuse the screws from your aircraft and keep them in order as you remove them.

Can I fit it myself? Yes, with patience and the right small tools. Photograph every stage, lift connectors straight out, follow the old cable route and calibrate afterwards.

What should I check after fitting it? Remove the protector, power on on a flat surface, watch the start-up motion run freely, confirm the live view, calibrate if needed and record a test clip.

What colour is it? Black throughout, as shown in the product images.

What is the DJI part number? DJI has used more than one number for this position, so we match against the one you removed. Photograph the assembly and send it to us.