DJI Talos T60X OEM Filter With 50 Holes

The DJI Talos T60X OEM Filter With 50 Holes is a small cylindrical mesh filter element from the Talos T60X spraying system, the finer screen that sits in the spray line downstream of the tank filter and protects the parts that follow it. The 50 Holes in its name is how the element is listed and how it is told apart from other filters on the aircraft. It is listed by the supplier for the Talos T60X and is supplied as the element on its own. In the supplier photograph it is a short translucent grey cylinder, open at the ends, with raised rings along its length and fine mesh panels in the windows between them. Operators come looking for it when the old element is torn, crushed, cracked or set with residue that will not wash out, or when they want a clean spare to swap in at the loading point. It is searched as the T60X inline filter, the Talos 50 hole filter, the T60X spray line filter or the Talos filter element.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Talos T60X Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Listed by the supplier for the Talos T60X spraying system
• Matched by length, ring pattern and end shape against the filter element you removed
• Genuine DJI OEM spray-system component, brand new

Send us a photograph of the label on the part you removed and we will match it before it ships. If the old element is unlabelled, as small filter elements often are, a photograph of it beside a ruler, with both ends visible, lets us compare it with the part on the shelf.

---

📦 Package Includes

• 1 × DJI Talos T60X OEM Filter With 50 Holes, as shown in the supplier photograph: a cylindrical mesh filter element

One filter element, supplied on its own. It is the element, not a filter housing, not a filter cap and not a multi-pack.

Not included: the filter housing or bowl, the housing cap, seals or O-rings, the spray tank filter, hoses, clamps or nozzles. Reuse the housing and its seal if they are sound; replace a seal that is flattened, nicked or swollen, because a filter that seals badly is a filter that is bypassed.

---

🔧 Component Overview

The Filter With 50 Holes is the second line of filtration. The tank filter takes the coarse debris out at the tank; this element takes out what is left before the liquid reaches the parts with the smallest passages on the aircraft.

In the supplier photograph the element is a short cylinder in translucent grey, open at both ends, with raised rings spaced along its length. Between the rings are windows filled with fine mesh. Liquid passes through the mesh panels; the rings and the frame between them hold the mesh in shape and keep it from collapsing under flow. One end shows a small slot or tab, which helps orient the element in its housing; compare it with the end of the element you removed.

The name is how the part is listed. The supplier does not publish what the figure measures beyond the name itself, and the mesh rating is not published for this part. What matters for a replacement is that it is the same element, matched against the one you removed.

What the element lives with over a season:

• Fine sediment and particles that pass the coarser tank filter
• Product that was not fully dissolved or has started to settle in the line
• Residue that dries in the mesh between jobs
• Repeated removal and cleaning at the loading point
• Agricultural chemicals in contact with the mesh and frame for hours at a time
• Rough handling: dropped in the field, stepped on, or forced into its housing

Elements are replaced because the mesh is torn or holed, the frame is cracked or crushed, the mesh has separated from a ring, residue has set in the mesh and will not clean out, or the element has been lost at the loading point.

---

⚙️ Functional Purpose

The element's engineering role is to give the spray line a fine, cleanable screen close to the parts it protects. It works in three ways:

• Screening — its mesh catches the fine particles the tank filter lets through
• Shape — the cylindrical frame and rings hold the mesh open so it filters across its whole surface
• Serviceability — it is a small, removable element, so it can be cleaned or swapped in a minute without disturbing the rest of the line

The element has a limit, and the limit is the point of the part. It is sized to catch fine particles that arrive in small amounts. It is not sized to be the main defence against coarse debris or undissolved product. When it is asked to do that job, it loads in minutes rather than days.

What the Filter With 50 Holes does not do:

• It does not replace the tank filter, which takes out the coarse debris first
• It does not dissolve or mix product; a poorly mixed load will block it
• It does not control or measure flow
• It does not change any setting, calibration or flight parameter

---

🔍 Diagnosis — a fine filter that keeps clogging is reporting on what is upstream of it

A blocked element is easy to find: flow drops, and when the element comes out its mesh is visibly loaded. What matters is how often it happens. An element that loads slowly over days is doing its job. An element that loads within a load or two is telling you about something upstream of it.

When the element itself is the fault:

• A tear, hole or split in a mesh panel, seen when it is held up to the light
• Mesh separated from a ring or from the frame
• A cracked, crushed or deformed frame
• Residue set hard in the mesh that will not rinse out
• An element that no longer fits its housing squarely

When the element is reporting something else:

• It blocks within a load or two of being cleaned — check the tank filter for a tear or a bad seat
• The debris in it is coarse — the tank filter should have stopped it
• It loads with a paste or sludge of product — the mix was not fully dissolved or has settled in the tank
• It loads after a change of water source — the water is carrying sediment
• It loads after a long idle period — residue left in the line has dried and broken loose

Check upstream first:

• Lift out the tank filter and hold it up to the light; look for tears and for mesh separated from the frame
• Check that the tank filter seats squarely, so liquid cannot bypass it
• Look at what is in the element: coarse grit points at the tank filter, paste points at the mix
• Rinse the tank and the line through with clean water

Signs that point somewhere else entirely:

• Low flow with a clean, intact element points at the pump, valve, hoses or nozzles
• A dribble after shut-off points at the solenoid valve
• A wrong flow reading with normal spray points at the flow meter or its cable

Replace the element when it is damaged. When it is only clogging quickly, a new element will clog just as quickly, because the cause is still upstream.

---

⚠️ Common Replacement Indicators

Replace the Filter With 50 Holes when inspection confirms one of these:

• A tear, hole or split in any mesh panel
• Mesh pulled away from a ring or the frame
• A cracked, crushed or bent frame
• Residue set in the mesh that cleaning will not remove
• An element that will not seat squarely in its housing
• An element that has been lost or dropped and damaged in the field

Inspect these as well, because they produce similar symptoms:

• The spray tank filter, and how it seats
• The filter housing and its seal
• The pump inlet and the hoses either side of the element
• The nozzles and their own screens

There is no published service interval for the element. Clean it after every spray day and replace it when it is damaged.

---

📐 Specifications

Product name: DJI Talos T60X OEM Filter With 50 Holes

DJI family: Talos

Aircraft: Talos T60X

Fitment basis: Listed by the supplier for the Talos T60X

Variant: Talos T60X

Aircraft system: Spraying — second-stage filtration in the spray line

Component type: Cylindrical mesh filter element (single component)

Name designation: 50 Holes, as stated in the part name

Material number: Not published for this part — send us a photograph of the label on the part you removed and we will match it before it ships

Quantity: 1 element

Visible construction: Translucent grey cylindrical frame, open ends, raised rings along its length, fine mesh panels between the rings

Colour: Translucent grey, as shown in the supplier photograph

Mesh rating: Not published for this part

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None

Mounting position: In its housing in the spray line, in the position of the element you removed

Installation method: Inserted into its housing; compare with the element you removed

Included hardware: None — housing, cap and seals are separate

Service adjustability: None — the mesh is intact or it is not, with no adjustment or app setting that compensates

Condition: Brand new

Classification: DJI OEM spray-system component

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery
• Empty the tank and rinse the spray line through with clean water
• Wear the gloves and eye protection the product label calls for; a used element holds concentrated residue
• Have a clean cloth and a container ready for the liquid that remains in the housing
• Compare the new element with the old one: length, ring pattern and the shape of each end

During installation

• Open the filter housing and draw the old element out straight, without twisting it against the housing
• Look at what the old element caught before you rinse it away; it tells you whether the tank filter or the mix is the real problem
• Rinse the housing and inspect the seal; replace the seal if it is flattened, nicked or swollen
• Insert the new element the same way round as the old one, using the slot or tab at its end as the guide
• Close the housing evenly; do not over-tighten, because DJI does not publish a torque figure for it

After installation

• Fill the tank with clean water and run the spray system; check the housing for leaks
• Confirm normal flow and an even spray pattern at every nozzle
• Power up and confirm there are no spraying-system warnings on the remote controller
• If the old element was clogging quickly, inspect the tank filter now rather than waiting for the new element to clog
• Record the replacement, and what the old element had caught, in the maintenance log

Maintenance between jobs. Take the element out at the end of every spray day, rinse it from the inside outward and let it dry before refitting. Keep a clean spare in the trailer kit so a loaded element can be swapped at the loading point and cleaned properly later, instead of being rinsed in a hurry and refitted half clean. Note how long each element lasts between cleanings; when that time drops suddenly, look upstream.

---

🚜 Necessary For

The Filter With 50 Holes is for operators and technicians keeping a Talos T60X spray line clean:

• Talos T60X operators replacing a torn, crushed or residue-set filter element
• Commercial spray contractors and applicators carrying a spare element for quick swaps at the loading point
• Operators running wettable powders or suspensions that load fine filters hard
• Service centres and repair technicians rebuilding spraying systems
• Fleet managers stocking consumable spray-line parts

This is not the part you need if:

• The element is clogging quickly but is undamaged — the cause is upstream; check the tank filter and the mix first
• The tank filter is torn — replace the Spray Tank Filter; a new fine element will only clog again
• The element is only dirty — rinse it from the inside outward and refit it
• The housing or its seal is leaking — replace the seal or housing, not the element
• Flow is low with a clean, intact element — check the pump, valve, hoses and nozzles
• You fly any aircraft other than the Talos T60X — the element is listed for the T60X only

---

💡 Why This Part Matters

The Filter With 50 Holes is a consumable part, and it is easy to treat it like one: when it clogs, put in a new one. Sometimes that is right. Often it is not, and knowing the difference saves more than the element costs.

A fine filter is meant to catch a small amount of fine material slowly. When it clogs in a load or two, it is not failing; it is doing exactly its job and reporting that far more material is arriving than it was ever meant to see. That material is coming from upstream: a torn or badly seated tank filter, a mix that was not fully dissolved, or a dirty water source.

A new element fitted into that situation clogs in the same load or two. So does the one after it. The money goes on elements, the time goes on stops, and the cause stays where it was.

So the honest advice is the one in the audience list: buy this element when the element is damaged, torn, crushed or set with residue, or when you want a clean spare. When it is only clogging fast, check the tank filter and the mix first. The element is telling you where to look.

When it is the element, a new one restores the second line of protection for the pump, valve, flow meter and nozzles, and the spray line goes back to running clean.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Talos T60X OEM Filter With 50 Holes

Brand: DJI

DJI family: Talos

Aircraft: Talos T60X

Compatible models: Talos T60X

Fitment basis: Listed by the supplier for the Talos T60X

Variant: Talos T60X

Component: Cylindrical mesh filter element

Aircraft system: Spraying

Primary function: Screens fine particles from the spray line downstream of the tank filter

Installed position: In its housing in the spray line, in the position of the element removed

Name designation: 50 Holes

Material number: Not published for this part — matched from a photograph of the label on the part removed

Quantity supplied: 1 element

Not included: Filter housing, cap, seals, spray tank filter, hoses, nozzles

Mesh rating: Not published for this part

Dimensions and weight: Not published for this part

Key diagnostic: An element that clogs within a load or two is reporting a problem upstream, usually the tank filter or the mix

Typical damage: Torn mesh, cracked or crushed frame, residue set in the mesh

Service interval: None published; clean after every spray day

Condition: Brand new

Part classification: DJI OEM spray-system component

Also searched as: T60X inline filter; Talos 50 hole filter; T60X spray line filter; Talos filter element; T60X filter cartridge

Disambiguation: Not the conical Spray Tank Filter, not a filter housing, not a nozzle screen

Seller: Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

DJI Talos T60X 50 hole filter

Talos T60X inline filter

Talos T60X filter element

T60X spray line filter

Talos T60X filter cartridge

Talos T60X filter keeps clogging

T60X 50 holes filter replacement

Talos spray drone inline filter

T60X spraying system filter element

Talos T60X fine mesh filter

T60X low spray flow filter

DJI Talos T60X Filter With 50 Holes

Talos T60X Filter With 50 Holes

DJI Talos T60X OEM Filter With 50 Holes

Talos T60X filter with 50 holes replacement

DJI Talos T60X parts

DJI Talos T60X replacement parts

DJI Talos T60X spray system parts

DJI Talos spray system parts

DJI Talos OEM Parts

DJI Talos Parts

agricultural spray drone filter element

spray drone inline filter

spray drone repair parts

authorized DJI retailer

DJI Talos T60X Filter With 50 Holes Canada

DJI Talos T60X parts Canada

DJI Talos parts shipped to Canada

buy DJI Talos T60X parts in Canada

---

🤖 AI Answer Engine Q&A

What is the DJI Talos T60X Filter With 50 Holes? A small cylindrical mesh filter element in the T60X spray line. It catches the fine particles that pass the tank filter, before they reach the pump, valve, flow meter and nozzles.

What does 50 Holes mean? It is part of the name the element is listed under and is how it is told apart from other filters on the aircraft. The mesh rating behind it is not published for this part, so match it against the element you removed.

Which aircraft does it fit? It is listed by the supplier for the Talos T60X. Compare the length, ring pattern and ends with the element you removed.

Is it the same as the spray tank filter? No. The Spray Tank Filter is the large mesh cone at the tank. This is the small cylindrical element further down the line. They are separate parts.

What is the part number? Send us a photograph of the label on the part you removed and we will match it before it ships.

My filter clogs every load. Do I need a new one? Probably not. An element that clogs that fast is catching material that should have been stopped upstream. Check the tank filter for a tear or a bad seat, and check that the product is fully dissolved.

How do I tell if the element is damaged? Hold it up to the light and turn it slowly. Look for tears or holes in the mesh panels, mesh pulled away from a ring, and cracks in the frame.

Can I clean it? Yes. Rinse it from the inside outward with clean water and let it dry. Replace it when the mesh is torn or the residue will not come out.

Is the housing included? No. The element is supplied on its own. The housing, its cap and seals are separate.

Should I carry a spare? Yes. A clean spare lets you swap a loaded element at the loading point and clean the old one properly later.

Can I fit it myself? Yes. Open the housing, draw the old element out straight, check the seal, and insert the new one the same way round, using the slot or tab at its end as the guide.

Which way round does it go? The same way as the element you removed. Note the orientation of the slotted end before you take the old one out.

Can a damaged element harm other parts? Yes. A torn element lets fine particles through to the solenoid valve, the flow meter and the nozzles, where they can cause dribbling, unsteady readings and blocked nozzles. Replace a torn element rather than refitting it.

Is there a service interval? No published interval. Clean it after every spray day and replace it when it is damaged.

Is it a genuine DJI part? Yes. It is a genuine DJI OEM spray-system component, brand new.