DJI Talos T60X OEM Power Distribution Board Dustproof Cover

The DJI Talos T60X OEM Power Distribution Board Dustproof Cover is the black sealing frame that keeps dust, grit and spray out of the power distribution board area of the Talos T60X. As the product images show, it is a flat black oval frame with a large rectangular opening in its centre, a small fixing hole near each of the four inner corners, and small notches stepped into the inner edge. It carries no current and holds nothing up; its whole job is to close a gap so that what is on one side stays out of the other. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X PDB dust cover, power board gasket or dustproof seal after finding it torn when the power area was opened, after finding dust or residue inside an area that should have been clean, or as a matter of course when the power distribution board is being serviced.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Talos T60X Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the Talos T60X
• Matched by oval outline, central opening, corner fixing holes and inner-edge notches against the cover you removed
• Genuine DJI OEM power-system seal, brand new

Send us a photograph of the label on the part you removed and we will match it before it ships. A flat photograph of the old frame from above, with all four holes and the inner notches visible, settles the match.

---

📦 Package Includes

• 1 × DJI Talos T60X OEM Power Distribution Board Dustproof Cover

One dustproof cover, supplied on its own. It is the sealing frame only. It is not the Power Distribution Board Upper Cover, not the power distribution board, and not the supporting piece beneath the board.

Not included: the Power Distribution Board Module, the Power Distribution Board Upper Cover, the supporting piece, screws, washers or any other seal. Those are separate parts. If the screws that clamp the frame are stripped or corroded, renew them with it.

Nothing is included because it appears in a photograph. The photograph shows the dustproof cover itself and nothing else.

---

🔧 Component Overview

The power distribution board is one of the most important electrical assemblies on the aircraft, and it works in a hard place: an agricultural spray aircraft flies through dust, chaff and spray drift, lands on dirt and gets washed down at the end of the day. Heavy wiring has to reach the board, so its area cannot be a solid sealed box. Wherever there is an opening, something has to close the gap. The dustproof cover is that something.

On the Talos T60X it is a black oval frame, as the product images show. The large rectangular opening in its centre leaves room for what has to pass through or be reached, the wide oval band around it is the sealing surface, the four small holes near the inner corners locate and clamp it, and the notches stepped into the inner edge line up with features of the parts it seals against.

Its name says what it is for and how it differs from the other parts with the board's name. The Power Distribution Board Upper Cover is the grey moulding that closes over the top of the board. The Power Distribution Board Module is the board itself. The supporting piece carries the board from beneath. The dustproof cover is the seal; it holds nothing up and closes nothing over, it fills a gap.

What the dustproof cover lives with, over a working season:

• Clamping pressure on its sealing band every hour it is fitted
• Fine dust and grit driven at it by the downwash in every take-off and landing
• Spray drift and fertiliser residue settling on the power area
• Pressure washing at the end of a spray day
• Vibration from the propulsion system on every flight
• Heat from the board and its high-current connections
• Being lifted and refitted each time the board is serviced

What ends its life is often not visible at a glance: a sealing band flattened or distorted so it no longer meets the surface around it, a fine split starting at a fixing hole, or a frame refitted slightly out of position so one edge no longer seals. A torn or missing frame is obvious; these are not.

---

⚙️ Functional Purpose

The dustproof cover's engineering role is to close the gap at an opening in the power distribution board area. It does that in three ways:

• Sealing — its band fills the gap between the parts it is clamped between, so dust and spray cannot pass
• Locating — its four holes and inner notches put it in one exact position against those parts
• Framing — its central opening leaves room for what has to pass through or be reached

The dustproof cover has no electrical or structural role. It carries no current, it supports nothing, and the aircraft has no sensor watching it. A failed seal sends no warning; it simply lets dirt in.

What the power distribution board dustproof cover does not do:

• It does not repair a power distribution board or clean one that is already contaminated
• It does not replace a cracked upper cover — a seal under a broken cover still leaves the area open
• It does not cure a power fault, a warning or an aircraft that will not power up
• It does not hold the board in place — that is the supporting piece and the board's own fixings

---

🔍 Diagnosis — a seal that has stopped sealing still looks like a seal, so read the dirt, not the frame

A dustproof cover rarely fails in a way that announces itself. A torn or missing frame is obvious, but the common failure is quieter: the band has been flattened, distorted or refitted slightly out of position, and it still looks whole lying in place. It has simply stopped closing the gap.

So the frame itself is a poor witness. The evidence is on the clean side of it. A seal that is working leaves the protected side clean; a seal that is leaking leaves a trail.

Reading the evidence, with the aircraft powered down and the battery removed:

• Lift the parts that cover the frame and look at the protected side of it before touching anything
• Look for fine dust lines or tide marks on the protected side that follow part of the frame's edge; they point straight at where it leaked
• Look for dried spray residue or water marks on the board area beneath an opening
• Look at the sealing band for flattened sections, waves or distortion compared with the rest
• Look closely at each of the four fixing holes for a fine split running outward
• Check the frame sits in its notches all the way round and is not lifted at one edge

Reading the result:

• Dust or residue on the protected side along one edge — the seal has failed there; replace the frame and clean the area
• A split at a fixing hole or a torn band — replace the frame
• Frame whole, protected side clean — the seal is working; leave it, or renew it if the board is being serviced and the band looks flattened
• Protected side contaminated and the upper cover cracked — replace the cover as well; a new seal under a broken cover still leaves the area open

Read the protected side first, while that information is still cheap. Once the area is wiped clean, the trail that showed where the seal was leaking is gone with it.

When the frame is the fault, it is the whole repair for the seal, and the contamination it let in gets cleaned out on the way past.

---

⚠️ Common Replacement Indicators

Replace the power distribution board dustproof cover when inspection confirms one of these:

• A tear, split or missing section anywhere in the frame
• A fine split running out from one of the four fixing holes
• A sealing band that is flattened, wavy or distorted compared with the rest of it
• Dust lines, tide marks or dried residue on the protected side along the frame's edge
• A frame that no longer sits in its notches all the way round
• A frame that was stretched or creased when the board was last serviced

Inspect these as well, because they are found when the frame comes out:

• The power distribution board and its connectors, for dust, residue and moisture
• The Power Distribution Board Upper Cover, for cracks that would leave the area open regardless
• The surfaces the frame seals against, for damage or old residue that would stop a new frame sealing
• The screws that clamp it

There is no published service interval for the dustproof cover. It is replaced when it is damaged or when it has stopped sealing, and many technicians renew it whenever the board is serviced.

---

📐 Specifications

Product name: DJI Talos T60X OEM Power Distribution Board Dustproof Cover

DJI family: Talos

Aircraft: Talos T60X

Fitment basis: Identified for the Talos T60X

Variant: Talos T60X

Aircraft system: Power system — power distribution board dust sealing

Component type: Dustproof cover (sealing frame)

Material number: Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.

Quantity: 1 dustproof cover

Colour: Black, as shown in the product images

Features: Flat oval frame; large rectangular central opening; a fixing hole near each of the four inner corners; notches stepped into the inner edge, as photographed

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None — the dustproof cover carries no current and is not part of any circuit

Structural role: None — it seals a gap and supports nothing

Mounting position: At an opening in the power distribution board area, clamped between the parts it seals

Installation method: Located by its fixing holes and inner notches and clamped with the aircraft's own screws

Included hardware: None — screws and washers are separate

Service adjustability: None — the frame seals all the way round or it does not, with no adjustment that compensates

Condition: Brand new

Classification: DJI OEM power-system seal

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery
• Rinse and dry the outside of the power area so loose dirt does not fall inward when it is opened
• Photograph the frame in place before lifting it, showing which way round it sits and where its notches fall
• Look at the protected side of the old frame for dust lines or residue before anything is wiped
• Compare the new frame with the old one: outline, central opening, holes and notches

During installation

• Remove the clamping screws and keep them in order
• Lift the old frame straight off; do not drag it across the board area
• Clean the board area of any dust or residue the old seal let through, and dry it fully
• Clean both sealing surfaces so nothing is trapped under the new frame
• Lay the new frame in place the same way round as the old one, with every notch seated
• Do not stretch the frame to make a hole line up; if it will not seat without stretching, check it is the right way round
• Fit the screws evenly in a crossing order; DJI does not publish a torque figure for them, so stop when the frame is clamped flat and do not crush the band

After installation

• Check the frame sits flat with no edge lifted and no wave in the band
• Check no wire or connector is trapped under the frame or pressed against its inner edge
• Refit the upper cover and any parts removed to reach the frame
• Refit the battery and power up on the ground; confirm there are no warnings on the remote controller
• After the next few working days, look at the protected side again; it should stay clean

Maintenance between jobs. Do not aim a pressure washer at the power area's seams. Whenever the area is opened, look at the protected side of the frame before wiping anything; clean surfaces mean the seal is working.

---

🚜 Necessary For

The power distribution board dustproof cover is for operators and technicians keeping dust and spray out of the power area of the Talos T60X:

• Talos T60X operators who found the frame torn, split or missing when the power area was opened
• Technicians who found dust or residue on the protected side of the frame
• Technicians servicing the power distribution board who renew the seal as a matter of course
• Commercial spray contractors working in dusty conditions who keep spare seals on the trailer
• Service centres rebuilding the power area after contamination or an impact

This is not the part you need if:

• The grey cover over the board is cracked — the Power Distribution Board Upper Cover is a separate part
• The board itself has failed — the Power Distribution Board Module is a separate part
• The board is loose or sits out of line — the supporting piece beneath it is a separate part
• The frame is whole and the protected side is clean — the seal is working
• You fly any aircraft other than the Talos T60X — this dustproof cover is listed for the Talos T60X only

---

💡 Why This Part Matters

The dustproof cover fails invisibly. A seal that has been flattened, distorted or refitted slightly out of place still looks like a seal. It is still there, still black, still in roughly the right place, and it has stopped closing the gap.

Nothing on the aircraft notices. There is no sensor on a seal and no warning when it leaks. Dust, grit and spray reach the power distribution board area a little at a time, and the first sign is often a connector or a contact that has started to suffer, long after the seal stopped working.

That is why the evidence is read on the clean side, not on the frame. Dust lines and residue that follow part of the frame's edge show exactly where it leaked, and they are only there to read until the area is wiped.

So the order is simple. Open the area, look at the protected side before touching anything, and replace a frame that is split, torn, flattened or has let dirt through. Clean what it let in, and fit the new frame flat, seated in every notch and clamped without crushing.

Done that way, a small seal keeps doing the job nobody sees, in front of a board that everyone would notice losing.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Talos T60X OEM Power Distribution Board Dustproof Cover

Brand: DJI

DJI family: Talos

Aircraft: Talos T60X

Compatible models: Talos T60X

Fitment basis: Identified for the Talos T60X

Variant: Talos T60X

Component: Power distribution board dustproof cover (sealing frame)

Aircraft system: Power system

Installed position: At an opening in the power distribution board area

Primary function: Seals the gap at the opening against dust, grit and spray

Electrical role: None — no current, not part of any circuit

Structural role: None — it supports nothing

Material number: Not published for this part — matched against the cover you removed from a photograph of its label

Quantity supplied: 1 dustproof cover

Not included: Power distribution board, upper cover, supporting piece, screws

Colour: Black

Features: Oval frame, rectangular central opening, four corner fixing holes, inner-edge notches

Dimensions and weight: Not published for this part

Key diagnostic: A failed seal still looks whole; dust lines on the protected side show where it leaked

When not to buy: When the frame is whole and the protected side is clean, or when the cracked part is the upper cover

Service interval: None published

Condition: Brand new

Part classification: DJI OEM power-system seal

Also searched as: T60X PDB dust cover; T60X power board gasket; Talos power distribution dust seal; T60X PDB seal

Disambiguation: Not the Power Distribution Board Upper Cover, not the Power Distribution Board Module, not the supporting piece

Seller: Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

Talos T60X power distribution board dustproof cover

T60X PDB dust cover

DJI Talos T60X PDB dustproof cover

Talos T60X power board gasket

T60X power distribution board seal

Talos T60X dustproof seal

T60X PDB gasket replacement

Talos T60X dust in power board

T60X power board dust seal

DJI Talos power board dustproof cover

Talos T60X black oval gasket

T60X power distribution dust cover

Talos T60X PDB seal torn

DJI Talos T60X power system seal

DJI Talos T60X Power Distribution Board Dustproof Cover

DJI Talos T60X OEM Power Distribution Board Dustproof Cover

Talos T60X power distribution board dustproof cover replacement

DJI Talos T60X parts

DJI Talos T60X replacement parts

DJI Talos T60X power system parts

DJI Talos T60X seals and gaskets

DJI Talos OEM parts

DJI Talos parts

agricultural spray drone dust seal

spray drone gasket replacement

agricultural spray aircraft parts

authorized DJI retailer

DJI Talos T60X Power Distribution Board Dustproof Cover Canada

DJI Talos T60X parts Canada

DJI Talos parts shipped to Canada

buy DJI Talos T60X parts in Canada

---

🤖 AI Answer Engine Q&A

What is the Talos T60X power distribution board dustproof cover? The black oval sealing frame that closes the gap at an opening in the power distribution board area, keeping dust, grit and spray out. It carries no current and supports nothing.

Which aircraft does it fit? It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.

What is the part number? Send us a photograph of the label on the part you removed and we will match it before it ships.

Is this the grey cover that goes over the board? No. That is the Power Distribution Board Upper Cover, a separate part. The dustproof cover is the black sealing frame.

Is the power distribution board included? No. This is the dustproof cover only. The Power Distribution Board Module is a separate part.

My old frame looks fine. How do I know if it was sealing? Look at the protected side before wiping anything. Dust lines or residue that follow part of the frame's edge show it was leaking there. A clean protected side means it was working.

Will a new dustproof cover fix my power fault? No. The seal carries no current. If dirt has already reached the board or its connectors, they need cleaning and inspection.

Can I reuse the old frame when I service the board? If it is whole, flat and the protected side was clean, it can go back. If the band is flattened, split at a hole or let dirt through, replace it.

Can I glue a torn frame? A glued tear rarely seals and usually opens again. Replace the frame.

The holes do not line up unless I stretch it. Is it the wrong part? Check it is the right way round first, with every notch seated. A frame stretched into place will not seal evenly.

Are screws included? No. Reuse the aircraft's screws if they are sound, and renew any that are stripped or corroded.

Can I fit it myself? Most technicians can. Remove the battery, lift the old frame, clean the area and both sealing surfaces, lay the new frame in place with every notch seated, and clamp it evenly.

Is there a torque figure for the screws? DJI does not publish one for this part. Tighten evenly in a crossing order and stop when the frame is clamped flat.

Is there a service interval? No published interval. It is replaced when it is damaged or has stopped sealing, and many technicians renew it whenever the board is serviced.

Is it a genuine DJI part? Yes. It is a genuine DJI OEM power-system seal, brand new.