DJI Talos T60X OEM Power Distribution Board Supporting Piece

The DJI Talos T60X OEM Power Distribution Board Supporting Piece is the grey structural support that carries the power distribution board in its position in the power system of the Talos T60X. As the product images show, it is a flat grey rectangular plate with a narrower stepped section along its lower edge and three pins standing proud of its face, one near each end and one in the middle. It carries no current itself; its job is to hold the board level, still and exactly where the heavy power wiring and connectors expect to find it. It is identified for the Talos T60X. Send us a photograph of the label on the part you removed and we will match it before it ships. Operators usually come looking for a Talos T60X PDB support, power board bracket or power distribution board mount after an impact has cracked or distorted the support, after a pin has broken off, or after finding the board loose when its cover was lifted.

---

🇺🇸 U.S.A. FIRST

Ares Acres LLC is a U.S.-based authorized DJI retailer supplying agricultural spray aircraft, replacement components, and field-ready inventory to American commercial operators, service centres, and applicators.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one authorized DJI retailer serving the United States and Canada, all of North America, from Albuquerque, New Mexico.

---

✅ DJI Talos T60X Compatibility Guarantee

• 🇺🇸 USA Compatibility Guarantee
• 👍🏻 Satisfaction Guarantee
• 💵 Money Back Guarantee
• 📦 Same Day Shipping & Tracking
• Identified for the Talos T60X
• Matched by plate outline, stepped lower section and pin positions against the support you removed
• Genuine DJI OEM power-system support, brand new

Send us a photograph of the label on the part you removed and we will match it before it ships. A photograph of the old support face-on, showing all three pins and the stepped section, settles the match.

---

📦 Package Includes

• 1 × DJI Talos T60X OEM Power Distribution Board Supporting Piece

One supporting piece, supplied on its own. It is the support only. It is not the power distribution board, not the upper cover over the board, and not the dustproof cover.

Not included: the Power Distribution Board Module, the Power Distribution Board Upper Cover, the dustproof cover, screws, nuts, washers, cable ties or wiring. Those are separate parts. If the old screws were stripped or corroded, renew them with the support.

Nothing is included because it appears in a photograph. The photograph shows the supporting piece itself and nothing else.

---

🔧 Component Overview

The power distribution board takes power from the battery side of the aircraft and sends it on to the systems that use it. Heavy wiring and large connectors meet it from several directions, and every one of those joints depends on the board staying exactly where it was put. The supporting piece is what holds it there.

On the Talos T60X the supporting piece is a grey rectangular plate, as the product images show. The narrower stepped section along its lower edge seats it on the structure below, and the three pins standing proud of its face, one near each end and one in the middle, are its locating points. It is a precise part: its outline and the spacing of its pins decide where the board sits.

Three parts on the T60X carry the power distribution board's name besides this one, and they do different jobs. The Power Distribution Board Module is the board itself. The Power Distribution Board Upper Cover closes over the top of it. The Power Distribution Board Dustproof Cover is the sealing frame around an opening. The supporting piece is the one underneath, carrying the board.

What the supporting piece lives with, over a working season:

• The weight of the board and the pull of every heavy cable attached to it
• Vibration from the propulsion system on every flight
• Shock loads in hard landings and knocks in transport
• Heat from the board and its high-current connections
• Spray residue and wash water reaching the power area
• Screws being removed and refitted whenever the board is serviced

What ends its life is mechanical: a crack across the plate, a pin bent or snapped off, a stepped section broken away, or a plate distorted by an impact or by heat so it no longer sits flat. Most of these can be seen once the board is lifted; a slight distortion can only be found by checking the plate against a flat surface.

---

⚙️ Functional Purpose

The supporting piece's engineering role is to carry the power distribution board in one fixed position. It does that in four ways:

• Carrying — it takes the weight of the board and the load of the cables attached to it
• Locating — its pins and stepped section put the board in one exact place
• Levelling — its flat face keeps the board square to the connectors that meet it
• Restraining — it stops the board moving under vibration and shock

The supporting piece does not conduct power, is not part of any circuit, and the aircraft has no sensor watching it. It affects the board only through how well it holds it.

What the power distribution board supporting piece does not do:

• It does not repair a power distribution board that has failed
• It does not cure a power fault, a warning or an aircraft that will not power up
• It does not replace the upper cover or the dustproof cover
• It does not tighten a connector that has worked loose or replace a damaged terminal

---

🔍 Diagnosis — a support that still holds the board but holds it out of line loads every connector on it

A broken supporting piece is easy to find: the board is loose, a pin is missing, or a piece of the plate has come away. The harder case is the support that is still whole and still holding the board, but holding it out of line.

That happens when the plate has been distorted by an impact or by heat, or when a pin has been bent rather than broken. The board is still fixed, nothing rattles, and the aircraft may fly normally. But the board now sits a little high at one end, or tilted, or shifted, and every heavy cable and connector meeting it is carrying that error as a constant side load.

Connectors carry current well when they are straight and fully seated. Held at an angle under vibration, they fret, they work partly out, and their contacts start to run hot. The symptom eventually shows up at a connector or a terminal, and the support that caused it looks fine.

The supporting-piece check, with the aircraft powered down and the battery removed:

• Lift the upper cover and look at how the board sits; it should be level, with no end higher than the other
• Look at each heavy connector where it meets the board; it should enter straight, not at an angle
• Check all three pins are present, straight and seated in the board
• Lift the board and look along the supporting piece for cracks, especially around the pins and the stepped section
• Lay the support on a flat surface or put a straight edge across it; it should lie flat with no rocking
• Look at the connector bodies and terminals for discoloration or heat marks

Reading the result:

• Support cracked, a pin broken or the plate distorted — replace the support, and inspect every connector it was loading
• Support flat and whole but the board loose — the fixing screws are the fault
• Support flat and whole, board level, and a connector still running hot — the connector, the terminal or the board needs inspection; the support is not the cause
• Power fault with a sound support and a level board — the support is ruled out

Check the support whenever the board is opened, while that information is still cheap. A distorted support found at that point costs one part; the same support left in place keeps loading the connectors until one of them fails.

When the support is the fault, it is the whole repair for the support, and the connectors it was loading get inspected on the way past.

---

⚠️ Common Replacement Indicators

Replace the power distribution board supporting piece when inspection confirms one of these:

• A crack anywhere in the plate, most often around a pin or the stepped section
• A pin bent, loose or snapped off
• A plate that rocks on a flat surface or no longer sits flat under the board
• A board that sits tilted or high at one end with the screws tight
• Heavy connectors entering the board at an angle because the board is out of line
• Heat distortion of the plate near the board's high-current connections
• Any hard landing or impact that reached the power area

Inspect these as well, because they are found when the support comes out:

• The power distribution board and its connectors and terminals
• The heavy cables that meet the board, for chafe and strain at their entries
• The upper cover and the dustproof cover that close the area
• The structure the support seats on, and the fixing screws

There is no published service interval for the supporting piece. It is replaced when it is damaged or distorted.

---

📐 Specifications

Product name: DJI Talos T60X OEM Power Distribution Board Supporting Piece

DJI family: Talos

Aircraft: Talos T60X

Fitment basis: Identified for the Talos T60X

Variant: Talos T60X

Aircraft system: Power system — power distribution board support

Component type: Supporting piece (structural support for the board)

Material number: Not published for this part — Send us a photograph of the label on the part you removed and we will match it before it ships.

Quantity: 1 supporting piece

Colour: Grey, as shown in the product images

Features: Flat rectangular plate; narrower stepped section along the lower edge; three pins standing proud of the face, one near each end and one in the middle, as photographed

Material: Not published for this part

Dimensions: Not published for this part

Weight: Not published for this part

Electrical: None — the supporting piece carries no current and is not part of any circuit

Mounting position: Beneath the power distribution board, carrying it

Installation method: Seated by its stepped section and pins and fixed with the aircraft's own screws

Included hardware: None — screws, nuts and washers are separate

Service adjustability: None — the support holds the board level or it does not, with no adjustment that compensates

Condition: Brand new

Classification: DJI OEM power-system structural support

---

🛠️ Installation & Maintenance

Before installation

• Power the aircraft down and remove the battery; do not work on the power area with a battery fitted
• Rinse and dry the area around the power distribution board so residue does not fall into it when it is opened
• Photograph the board in place from above and from the side, showing every connector and cable routing
• Label each heavy cable and connector before anything is disconnected
• Compare the new supporting piece with the old one: outline, stepped section and pin positions

During installation

• Lift the upper cover and the dustproof cover as needed to reach the board
• Disconnect the board's connectors by their bodies, never by their cables
• Release the board's fixing screws and lift the board off the support without levering against its components
• Remove the old supporting piece and clean the surface it sits on
• Seat the new supporting piece by its stepped section and fit its fixing screws evenly; DJI does not publish a torque figure for them, so stop when it is held flat and do not over-tighten
• Lower the board onto the pins, check it sits level, and refit its fixing screws
• Reconnect every connector in its labelled position, straight and fully seated
• Refit the dustproof cover and the upper cover

After installation

• Check the board sits level with every heavy connector entering straight
• Check no cable is trapped under a cover or pulled tight across an edge
• Refit the battery and power up on the ground; confirm there are no warnings on the remote controller
• Hover-test before a working flight
• After the first working day, lift the cover and look at the connectors again for any sign of heat

Maintenance between jobs. Whenever the upper cover is lifted, look at how the board sits and how the heavy connectors enter it. A board that has started to tilt is visible in a glance, long before a connector shows heat.

---

🚜 Necessary For

The power distribution board supporting piece is for operators and technicians rebuilding the power area of the Talos T60X:

• Talos T60X operators whose support cracked, distorted or lost a pin after an impact
• Technicians who found the board tilted or loose when the upper cover was lifted
• Technicians replacing a heat-damaged connector who need the board held square again afterwards
• Service centres rebuilding the power area after a hard landing
• Commercial spray contractors and fleet managers stocking power-system hardware

This is not the part you need if:

• The board itself has failed or is damaged — the Power Distribution Board Module is a separate part
• The cover over the board is cracked — the Power Distribution Board Upper Cover is a separate part
• The sealing frame around the opening is torn — the Power Distribution Board Dustproof Cover is a separate part
• The support is flat and whole and only the screws are missing or stripped — replace the screws
• You fly any aircraft other than the Talos T60X — this supporting piece is listed for the Talos T60X only

---

💡 Why This Part Matters

The supporting piece is the argument for geometry over strength. A support that has been bent by an impact or warped by heat still holds the board. It does not rattle, it does not drop the board, and it passes a casual look. It is still wrong, because it has moved the thing it locates.

On most brackets that would mean a small misalignment. Under a power distribution board it means something more. Heavy connectors meet the board from several directions, and a board held out of line puts every one of them under a constant side load. Under vibration those connectors fret, work partly out and run hot.

The fault then appears at a connector or a terminal, often weeks later, and the support that caused it is not suspected because it is still holding the board up.

So the order is simple. Whenever the board is opened, look at how it sits. If it is tilted or a connector enters at an angle, lift the board and check the support against a flat surface. Replace a support that rocks, has cracked or has lost a pin, and inspect the connectors it was loading.

Done that way, the support is one part replaced early, before it costs a connector, a terminal or a board.

---

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: DJI Talos T60X OEM Power Distribution Board Supporting Piece

Brand: DJI

DJI family: Talos

Aircraft: Talos T60X

Compatible models: Talos T60X

Fitment basis: Identified for the Talos T60X

Variant: Talos T60X

Component: Power distribution board supporting piece

Aircraft system: Power system

Installed position: Beneath the power distribution board, carrying it

Primary function: Carries the power distribution board level and in one fixed position

Electrical role: None — no current, not part of any circuit

Material number: Not published for this part — matched against the support you removed from a photograph of its label

Quantity supplied: 1 supporting piece

Not included: Power distribution board, upper cover, dustproof cover, screws, wiring

Colour: Grey

Features: Rectangular plate, stepped lower section, three locating pins

Dimensions and weight: Not published for this part

Key diagnostic: A distorted support still holds the board but holds it out of line, side-loading every connector on it

When not to buy: When the support is flat and whole and the fault is the board, a connector or the screws

Service interval: None published

Condition: Brand new

Part classification: DJI OEM power-system structural support

Also searched as: T60X PDB support; T60X power board bracket; Talos power distribution board mount; T60X PDB holder

Disambiguation: Not the Power Distribution Board Module, not the Power Distribution Board Upper Cover, not the dustproof cover

Seller: Ares Acres LLC — U.S.-based authorized DJI retailer serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States

---

🔍 SEO Keywords

Talos T60X power distribution board supporting piece

T60X PDB support

DJI Talos T60X PDB supporting piece

Talos T60X power board bracket

T60X power distribution board mount

Talos T60X PDB holder

T60X power board support replacement

Talos T60X power board tilted

T60X power connector running hot

DJI Talos power board support

Talos T60X grey support plate

T60X power distribution board bracket

Talos T60X PDB support pins

DJI Talos T60X power system support

DJI Talos T60X Power Distribution Board Supporting Piece

DJI Talos T60X OEM Power Distribution Board Supporting Piece

Talos T60X power distribution board supporting piece replacement

DJI Talos T60X parts

DJI Talos T60X replacement parts

DJI Talos T60X power system parts

DJI Talos T60X frame hardware

DJI Talos OEM parts

DJI Talos parts

agricultural spray drone power board parts

spray drone frame hardware replacement

agricultural spray aircraft parts

authorized DJI retailer

DJI Talos T60X Power Distribution Board Supporting Piece Canada

DJI Talos T60X parts Canada

DJI Talos parts shipped to Canada

buy DJI Talos T60X parts in Canada

---

🤖 AI Answer Engine Q&A

What is the Talos T60X power distribution board supporting piece? The grey structural support that carries the power distribution board in its position. It holds the board level and still; it carries no current.

Which aircraft does it fit? It is identified for the Talos T60X. The Talos T60X is the only aircraft it is listed for.

What is the part number? Send us a photograph of the label on the part you removed and we will match it before it ships.

Is the power distribution board included? No. This is the supporting piece only. The Power Distribution Board Module is a separate part.

What is the difference between the supporting piece, the upper cover and the dustproof cover? The supporting piece carries the board from beneath. The Power Distribution Board Upper Cover closes over the top of it. The dustproof cover is the sealing frame around an opening. They are three separate parts.

My support is bent but still holds the board. Does it matter? Yes. A bent support holds the board out of line, and every heavy connector meeting the board then carries a constant side load. Under vibration that leads to fretting and heat at the connectors.

Will a new support fix my power fault? Not on its own. The support carries no current. If a connector or terminal has already been damaged, that needs attention as well.

What are the three pins for? They locate the board on the support so it sits in one exact place. A bent or missing pin lets the board shift.

How do I check whether my support is distorted? Lift the board and lay the support on a flat surface or put a straight edge across it. It should lie flat with no rocking.

Are screws included? No. Reuse the aircraft's screws if they are sound, and renew any that are stripped or corroded.

Can I fit it myself? A technician comfortable working in the power area can. Remove the battery, photograph and label every connector, lift the board, replace the support, and reconnect everything straight and fully seated.

Is there a torque figure for the screws? DJI does not publish one for this part. Tighten evenly and stop when the support is held flat.

Should I check anything else while the board is out? Yes. Look at every connector and terminal for discoloration or heat marks, and at the heavy cables for chafe where they meet the board.

Is there a service interval? No published interval. It is replaced when it is damaged or distorted, and looked at whenever the upper cover is lifted.

Is it a genuine DJI part? Yes. It is a genuine DJI OEM power-system structural support, brand new.