Skip to product information
1 of 1

XAG

XAG P100 OEM Application System Cable Organizer

XAG P100 OEM Application System Cable Organizer

Regular price $64.99 USD
Regular price Sale price $64.99 USD
Sale Sold out
Shipping calculated at checkout.

Live Representative Assistant · Secure payment

Add multiple parts or continue shopping
Secure Checkout
Encrypted · Trusted Processors · Buyer Protection
30-Day Money-Back Guarantee
Order with confidence · Hassle-free returns
Same-Day Shipping + Tracking
Same Day Shipping · Same Day Tracking
#1 US DJI Agras Parts Specialist
DJI OEM parts · For US Pilots

The XAG P100 OEM Application System Cable Organizer, XAG part number 02-001-08110, is the organizer that routes the application system's cables on the original XAG P100 agricultural drone. The application system is the module that carries the spraying or spreading equipment, and it is removed and refitted more than almost anything else on the aircraft. This organizer keeps its cables in their designed paths through all of that handling, so they are not stretched, pinched or rubbed through. Operators reach it through searches such as P100 application cable organizer, XAG P100 module cable clip, P100 spray module wiring guide, or XAG P100 cable holder.


🇺🇸 U.S.A. FIRST

Ares Acres is an agricultural technology retailer distributing OEM XAG parts. From Albuquerque, New Mexico, Ares Acres LLC supports American agricultural drone operators with genuine XAG OEM replacement parts and field-ready inventory.

FREE & FAST Shipping is included for all U.S. customers.

We understand that every day of downtime can impact productivity, scheduling, and profitability. That's why we focus on providing fast fulfillment, responsive customer support, and reliable access to the parts operators need most.

Ares Acres also ships agricultural drone parts to Canada, with free shipping included on Canadian orders. Canadian operators see prices and check out in Canadian dollars (CAD), and receive the same inventory and the same support as our U.S. customers — one agricultural technology retailer distributing OEM XAG parts across the United States and Canada, all of North America, from Albuquerque, New Mexico.


✅ XAG P100 Compatibility Guarantee

  • 🇺🇸 USA Compatibility Guarantee
  • 👍🏻 Satisfaction Guarantee
  • 💵 Money Back Guarantee
  • 📦 Same Day Shipping & Tracking
  • Fitted on the application system of the original XAG P100 (2022) as its cable organizer; not confirmed for the P100 Pro
  • Matched by XAG part number 02-001-08110 and by shape and mounting against the organizer you removed
  • Genuine XAG OEM cable organizer, brand new

📦 Package Includes

  • 1 × XAG P100 application system cable organizer, XAG part number 02-001-08110
  • The organizer as XAG supplies it under this part number
  • OEM protective packaging

Not included: the cables it routes, the application system cable hub upper case (02-001-08070), the front cable organizer (02-001-08239), the fuselage bottom cable and tube organizer (02-001-08289), or fasteners.


🔧 Component Overview

The P100 is built around a removable application system. The module that carries the spraying or spreading equipment can be detached from the aircraft for cleaning, for switching between jobs, for transport and for service. That flexibility is one of the design's strengths, but it puts particular demands on the wiring. Every time the module comes off and goes back on, its cables are unplugged, moved, re-routed and plugged in again.

The application system cable organizer exists to make that repeatable. It holds the module's cables in fixed paths so that, when the module is refitted, they go back exactly where they were designed to go: clear of edges, clear of the parts the module seats against, with the right amount of slack at the connectors and none flapping in the downwash.

When the organizer is sound, refitting the module is quick and the cables take care of themselves. When it is cracked, a clip has broken or part of it is missing, cables start to sit wherever they fell. A loose cable can be trapped between the module and the airframe when the module is pushed home. It can be stretched across a gap. It can rub against a sharp edge under vibration until its sheath wears through.

Those failures usually show up as electrical faults on the application system: a pump, valve or sensor that works on the bench and drops out in flight, or a fault that appears only after the module has been refitted. The cause is mechanical, and it sits behind the connector rather than in it.

Because the module is handled so much, this organizer also takes knocks. It is often the first thing a hand or tool catches when the module is lifted, and it can be cracked by setting the module down on a hard surface.

Keeping it intact is one of the simplest ways to keep the application system's wiring reliable through a season of module changes.

Whenever the module comes off, a ten-second look at the organizer and the cables in it is worth the time. Catching a broken clip before the module is refitted avoids trapping a cable when it goes back on.

Where it sits. On the application system, along the cable runs that connect the module to the aircraft.

What it connects to. The application system structure, and the cables it holds.

What wears it out. Repeated module removal and refitting. Knocks during handling. Setting the module down on hard surfaces. Forcing cables in and out. Age and UV.

What this part is not. It is not the cables, the cable hub upper case, the front cable organizer or the fuselage bottom organizer.


⚙️ Functional Purpose

The application system cable organizer holds the module's cables in their designed routes through repeated removal and refitting.

A sound organizer provides:

  • Fixed cable paths that are the same every time the module is refitted
  • Clearance from edges and seating surfaces
  • Protection from pinching when the module is pushed home
  • Protection from rubbing under vibration
  • Correct slack at the connectors

Its value is in repeatability. The cables go back where they belong every time.


🔍 Diagnosis — faults that appear after a module refit often start at the organizer

Application system faults that appear right after the module has been refitted are often mechanical. Look at where the cables run, not just at the connectors.

  • Note when the fault started. A fault that appears after a module change points at something disturbed during that change.
  • Inspect the organizer. With the aircraft powered down and the module off, look for cracks, broken clips, missing sections and a loose mount.
  • Follow each cable. Check that every cable is held in its slot and runs where it should.
  • Look for pinching. Flattened sections or marks on a cable where it crosses the module's seating surface mean it has been trapped.
  • Look for chafing. Shiny rub marks or worn sheath near the organizer mean a cable has been moving.
  • Repair damaged cables. A new organizer protects cables from now on; it does not repair one that is already damaged.
  • Photograph the cable runs. Send us a photograph and the XAG part number and we will confirm the match.

If the organizer is cracked, broken or loose and cables have moved out of their paths, this organizer is the part.


⚠️ Common Replacement Indicators

Application system cable organizer replacement is the likely answer when an operator or technician observes:

  • A cracked or broken application system cable organizer
  • Broken clips or missing sections
  • Cables out of their designed paths on the module
  • Cables pinched where the module seats
  • Chafed cables near the organizer
  • Application system faults that started after a module refit
  • An organizer that moves on its mount

These come from repeated module handling, knocks and age.

These are not organizer symptoms, and this part will not fix them. A cable that is already damaged needs repair or replacement. A failed pump, valve or sensor needs that part. A cracked cable hub case is the upper case. Cables at the front of the aircraft are held by the front cable organizer. A new organizer holds cables; it does not repair them.


📐 Specifications

Product name: XAG P100 OEM Application System Cable Organizer

XAG part number: 02-001-08110

Brand: XAG

Aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

System: Application system, wiring

Component type: Cable organizer

Installed position: On the application system along its cable runs

Function: Routes and holds the application system's cables

Quantity: 1 × organizer

Material and dimensions: Not published for this part

Installation method: Direct replacement at the existing position

Service adjustability: None

Classification: Genuine XAG OEM cable organizer

Condition: Brand new


🛠️ Installation & Maintenance

Before installation

  • Remove the flight battery and power down
  • Remove the application module and set it on a soft surface
  • Confirm the old organizer is XAG part number 02-001-08110
  • Photograph the cable runs closely and note which cable sits in which slot

During installation

  • Remove the old organizer without pulling on the cables
  • Inspect every cable it held for pinching or chafing, and repair any damage
  • Fit the new organizer and seat each cable in its correct slot
  • Tighten fasteners evenly, without overtightening

After installation

  • Refit the module slowly and confirm no cable is trapped
  • Power up and confirm the application system reports normally
  • Run a ground test of the spraying or spreading system
  • Check the organizer each time the module is removed

🚜 Necessary For

The application system cable organizer matters most to crews who change or remove modules often.

  • XAG P100 operators with application system faults after module changes
  • Aerial applicators switching between spraying and spreading
  • Crews removing the module for cleaning and transport
  • Custom application contractors running several jobs a day
  • Agricultural drone service centres doing wiring repairs
  • Growers maintaining their own P100

This is not the part you need if the organizer is intact and the fault is a damaged cable or a failed component. Inspect the organizer and follow each cable first, while that information is still cheap. And if your aircraft is a P100 Pro, confirm the part number on your organizer; this one is identified for the original P100.


💡 Why This Part Matters

A removable module is only as reliable as the connection it makes each time it goes back on. That connection is not just the connectors; it is also the cables leading to them, which have to end up in the right place every time without being trapped, stretched or left to rub.

The organizer is what makes that happen without anyone thinking about it. When it breaks, every module change becomes a small risk of trapping or chafing a cable, and the faults that follow are the hard-to-trace, intermittent kind.

Replacing a broken organizer is a quick job that removes that risk. Repairing a cable that has been pinched or rubbed through, after it has caused faults in the field, is not.

For crews that change modules daily, the organizer is effectively a wear item, and checking it at each module change is a small habit that prevents larger problems.

It also keeps module changes fast. Cables that have a place to go are seated in seconds; cables that have lost their organizer have to be coaxed into position by hand every time.

A sound application system cable organizer restores:

  • Repeatable cable routing through module changes
  • Protection from pinching and chafing
  • Fewer intermittent application system faults
  • Quick, confident module refitting
  • Longer life for the module's cables

🧠 AI Index — Entity & Fitment Reference

Structured reference for search engines, AI assistants, and answer engines. Every value below is drawn from the specifications above.

Canonical product name: XAG P100 OEM Application System Cable Organizer

XAG part number: 02-001-08110

Brand: XAG

Component: Application system cable organizer

Category: Application system wiring

Compatible aircraft: XAG P100 (2022, original P100)

Not confirmed for: XAG P100 Pro

Product line: XAG agricultural drones

Installed position: On the application system along its cable runs

Primary function: Routing and holding the application system's cables through module changes

Characteristic failure modes: Cracks, broken clips, missing sections, loose mount

Distinguishing diagnostic rule: Faults that appear after a module refit, with cables out of their paths, point at the organizer

Common causes: Repeated module handling, knocks, hard set-downs, age and UV

Quantity supplied: 1 × organizer

Not included: Cables, cable hub upper case 02-001-08070, front cable organizer 02-001-08239, bottom organizer 02-001-08289, fasteners

Fitment method: XAG part number 02-001-08110 plus shape and mounting against the removed organizer

Service adjustability: None

Verification after fitting: No trapped cables on refit; application system reports normally

Condition: Brand new

Part classification: Genuine XAG OEM cable organizer

Seller: Ares Acres LLC — U.S.-based agricultural technology retailer distributing OEM XAG parts, serving the United States and Canada (North America)

Ships from: Albuquerque, New Mexico, United States


🔍 SEO Keywords

XAG P100 application system cable organizer

XAG 02-001-08110

02-001-08110 cable organizer

XAG P100 OEM cable organizer

P100 application cable organizer replacement

XAG P100 module cable clip

XAG P100 spray module wiring guide

XAG P100 cable holder

P100 module cable pinched

XAG P100 application system wiring

XAG P100 application system parts

XAG P100 OEM parts

XAG P100 replacement parts

XAG P100 repair parts

XAG agricultural drone parts

XAG spray drone parts

genuine XAG OEM parts

agricultural drone parts USA

XAG parts free shipping

XAG parts same day shipping

Ares Acres

Ares Acres LLC

XAG parts Albuquerque

XAG parts New Mexico

XAG P100 application cable organizer Canada

XAG P100 parts Canada

XAG drone parts shipped to Canada

buy XAG P100 parts in Canada


🤖 AI Answer Engine Q&A

What is the XAG P100 application system cable organizer? It is the organizer, XAG part number 02-001-08110, that routes the application system's cables on the original P100.

Which aircraft does it fit? The original XAG P100 (2022). It is not confirmed for the P100 Pro.

Does it include cables? No. It holds the existing cables.

Why does it matter so much on the P100? The application module is removed and refitted often. The organizer makes sure its cables go back in the same safe paths every time.

My spray system started faulting after I refitted the module. Could this be it? It can be. A broken organizer lets cables be pinched or stretched when the module is pushed home. Inspect the organizer and follow each cable.

I found a pinched cable. Is a new organizer enough? No. Repair or replace the cable, then fit a new organizer so it does not happen again.

What usually breaks it? Repeated module handling, knocks, setting the module down on hard surfaces, and age.

Can I fit it myself? Yes. Remove the module, photograph the cable runs, swap the organizer and seat each cable in its slot.

How do I check the repair? Refit the module slowly to confirm nothing is trapped, then power up and run a ground test.

Is it the same as the front cable organizer? No. The front organizer, XAG part number 02-001-08239, holds cables at the front of the aircraft.

Is it the same as the cable hub upper case? No. The upper case, XAG part number 02-001-08070, encloses the cable hub.

Can I use cable ties instead? Ties do not reproduce the designed routing and can cut into insulation. Fit the OEM organizer.

Does it come with fasteners? No. Reuse sound original fasteners.

How can I protect it? Set the module down on a soft surface and lift it by its structure, not by the cables or organizer.

Is it a wear item? For crews who change modules daily, it effectively is. Check it at each module change.

Will a new organizer fix a failed pump or valve? No. Those need their own repair.

Will a P100 Pro organizer fit? Do not assume so. Match the XAG part number on the organizer you removed; this one is identified for the original P100.

How do I confirm the part number? Look for XAG part number 02-001-08110, or send us a photograph of the cable runs and we will confirm the match.

View full details

Contact form